Surface Hardening of Steel by Electron-Beam Cladding of Ti+С and Ti+B4C Powder Compositions at Air Atmosphere

Daria Mul; Dina S. Krivezhenko; Tatyana Zimoglyadova; Albert Popelyukh; Daria Lazurenko; Lilia I. Shevtsova

doi:10.4028/www.scientific.net/AMM.788.241

Paper Titles

Simulation of Structure Formation Processes of Dissimilar Steels Welded Joints Using an Intermediate Layer
p.218

Structure of the Al-Сr-Ni Coating Formed on the H20N80 Alloy Substrate and its Transformation at 1150 °С
p.225

Structure, Properties and Texturing of Ti-Ta-Mo Alloys Produced by Non-Vacuum Electron Beam Surface Alloying of Ti
p.230

Surface Alloying of Cylindrical Steel Parts Using Non-Vacuum Electron Beam Treatment
p.237

Surface Hardening of Steel by Electron-Beam Cladding of Ti+С and Ti+B₄C Powder Compositions at Air Atmosphere
p.241

Techniques of SrAl₁₂O₁₉ Platelets Formation in ZTA
p.246

The Effect of Heat Temperature on the Structure of Plasma Coating of the Ni-Cr-Si-B System
p.252

The Influence of Pulsed Heat and Power Supply on the Structure and Properties of Welded Joint Metals and Surfaced Coatings
p.259

The Structure and Corrosion Resistance of the Coatings Obtained by Non-Vacuum Electron Beam Cladding of the Ti-Nb Powder Mixture on a Titanium Substrates
p.267

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 788Surface Hardening of Steel by Electron-Beam...

Surface Hardening of Steel by Electron-Beam Cladding of Ti+С and Ti+B₄C Powder Compositions at Air Atmosphere

Abstract:

Structural investigations of the materials obtained by surface alloying with titanium-containing powder compositions using industrial electron acceleration were carried out. It was revealed that hardened particles of titanium carbides and borides were formed as a result of high-energy treatment. The highest value of materials studied microhardness was about 8.4 GPa. Friction testing against fixed abrasive particles showed that electron-beam cladding of the titanium and graphite mixture conduced to increasing material wear resistance by a factor of three.

You might also be interested in these eBooks

Actual Problems and Decisions in Machine Building

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 788)

Pages:

241-245

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.788.241

Citation:

Cite this paper

Online since:

August 2015

Authors:

Daria Mul*, Dina S. Krivezhenko, Tatyana Zimoglyadova, Albert Popelyukh, Daria Lazurenko, Lilia I. Shevtsova

Keywords:

Cladding, Electron Beam, Steel, Titanium Boride, Titanium Carbide, Wear Resistance

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] B. A. Potekhin, S. G. Lukashenko, S. P. Kochugov. Effect of plasma coatings on the damping properties of structural steels. Met. Sci. Heat Treat. 42 (2000) 407-410.

DOI: 10.1007/bf02725326

Google Scholar

[2] H. M. Choi, B. S. Kang, W. K. Choi, D. G. Choi, S. K. Choi, J. C. Kim, Y. K. Park, G. M. Kim. Effect of the thickness of plasma-sprayed coating on bond strength and thermal fatigue characteristics. J. Mater. Sci. 33 (1998) 5895-5899.

DOI: 10.1023/a:1004439123350

Google Scholar

[3] B. Du, S. R. Paital, N. B. Dahotre. Phase constituents and microstructure of laser synthesized TiB2-TiC reinforced composite coating on steel. Scripta Mater. 59 (2008) 1147-1150.

DOI: 10.1016/j.scriptamat.2008.07.035

Google Scholar

[4] C.P. Mulligan, M. Senick, D.P. Schmidt, V. Khominich, Z. Gay, D. Bell. CrN, CrN/SiC, and CrN/DLC coatings deposited by a novel arc plasma acceleration process: Processing and properties. Mater. Manuf. Processes. 29 (2014) 1037-1043.

DOI: 10.1080/10426914.2014.880470

Google Scholar

[5] S.O. Yilmaz, M. Özenbas, M. Yaz, Fecrc, few, and nial modified iron-based alloy coating deposited by plasma transferred arc process. Mater. Manuf. Processes. 26 (2011) 722-731.

DOI: 10.1080/10426914.2010.480997

Google Scholar

[6] Liu, A. Guo, M. Hu, H.L. Distribution and dissolution of WC particles in surface metal matrix composites produced by plasma melt injection. Surf. Eng. 26 (2010) 623-628.

DOI: 10.1179/174329409x389317

Google Scholar

[7] S.N. Fadeev, M.G. Golkovski, A.I. Korchagin, N.K. Kuksanov, A.V. Lavruhin, S.E. Petrov, R.A. Salimov, A.F. Vaisman. Technological applications of BINP industrial electron accelerators with focused beam extracted into atmosphere. Radiat. Phys. Chem. 57 (2000).

DOI: 10.1016/s0969-806x(99)00499-5

Google Scholar

[8] E. A. Bataeva, I. A. Bataev, V. G. Burov, L. I. Tushinskii, M. G. Golkovskii. Effect of initial state on inhomogeneity of the structure of carbon steels hardener by electron-beam treatment at atmospheric pressure. Met. Sci. Heat Treat. 51 (2009).

DOI: 10.1007/s11041-009-9124-x

Google Scholar

[9] I.A. Bataev, A.A. Bataev, A.Y. Teplykh, V.G. Burov, S.V. Veselov, M.G. Golkovsky. Non-vacuum electron-beam boriding of low-carbon steel. Surf. Coat. Technol. 207 (2012) 245-253.

DOI: 10.1016/j.surfcoat.2012.06.081

Google Scholar

[10] D.O. Mul, M.G. Golkovsky, V.A. Bataev, D.S. Krivezhenko. Structure and properties of coatings produced by non-vacuum electron beam cladding of tantalum-reach powder on mild steel, in: 8th International Forum on Strategic Technology 2013, IFOST 2013 - Proceedings, 2013, 147-149.

DOI: 10.1109/ifost.2016.7884068

Google Scholar

[11] D.O. Mul, E.A. Drobyaz, I.K. Chakin, V.V. Samoylenko, V.S. Lozhkin, R.A. Dostovalov. Structure and properties of steel under non-vacuum electron-beam welding deposition of titanium, tantalum, molybdenum and graphite powders, Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty). 3 (2013).

Google Scholar

[12] I.A. Bataev, A.A. Bataev, M.G. Golkovski, D.S. Krivizhenko, A.A. Losinskaya, O.G. Lenivtseva, Structure of surface layers produced by non-vacuum electron beam boriding, Appl. Surf. Sci. 284 (2013) 472– 481.

DOI: 10.1016/j.apsusc.2013.07.121

Google Scholar