The Application of Fuzzy Control in Vehicle Emission Reduction Technology

Article Preview

Abstract:

In this paper, fuzzy control was applied in the technology of reducing NOx of vehicle exhaust. The calculation model of control system was obtained through theoretical derivation. The input and the output of the control system were obtained through bench test, and then established the control system table. Fulfilled the hardware installation and debugging of SCR system, DSPACE system, NOx sensor and engine system, and then the control system look-up table was be written in DSPACE /MATLAB system. It is proved that the application of fuzzy control in vehicle emission reduction is feasible through the processing and analysis of test data.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

306-310

Citation:

Online since:

January 2015

Authors:

Export:

Price:

* - Corresponding Author

[1] Jun Qin, Lin Lv. Study on the route of China IV heavy-duty diesel engine technology, Journal of Engine information for vehicle, 2007, 5(4) : pp.4-9.

Google Scholar

[2] Hong He, Duan Weng. Overview of technology to diesel engine emission control, Journal of Environmental Science, 2007, 28(6) : pp.1169-1171.

Google Scholar

[3] Jing Zhu. The principle and application of fuzzy control, Machinery Industry Press, 1995, pp: 2-3.

Google Scholar

[4] Jian Wang. Integrated Research Soot Trapping and Low Pressure Difference Silencer unpublished.

Google Scholar

[5] State Environmental Protection Administration of China, General Administration of Quality Supervision, Inspection and Quarantine of the PRC. GB17691-2005: The emission limits and measurement methods for automotive compression ignition, gas fuel ignition engine and automobile exhaust, Beijing, (2005).

Google Scholar