Welcome to the InfoSci Platform
Reference Hub3
Biomechanical Properties of the Foot Sole in Diabetic Mellitus Patients: A Preliminary Study to Understand Ulcer Formation

Biomechanical Properties of the Foot Sole in Diabetic Mellitus Patients: A Preliminary Study to Understand Ulcer Formation

V. B. Narayanamurthy, Richa Poddar, R. Periyasamy
Copyright: © 2014 |Volume: 3 |Issue: 1 |Pages: 17
ISSN: 2161-1610|EISSN: 2161-1629|EISBN13: 9781466652897|DOI: 10.4018/ijbce.2014010101
Cite Article Cite Article

MLA

Narayanamurthy, V. B., et al. "Biomechanical Properties of the Foot Sole in Diabetic Mellitus Patients: A Preliminary Study to Understand Ulcer Formation." IJBCE vol.3, no.1 2014: pp.1-17. http://doi.org/10.4018/ijbce.2014010101

APA

Narayanamurthy, V. B., Poddar, R., & Periyasamy, R. (2014). Biomechanical Properties of the Foot Sole in Diabetic Mellitus Patients: A Preliminary Study to Understand Ulcer Formation. International Journal of Biomedical and Clinical Engineering (IJBCE), 3(1), 1-17. http://doi.org/10.4018/ijbce.2014010101

Chicago

Narayanamurthy, V. B., Richa Poddar, and R. Periyasamy. "Biomechanical Properties of the Foot Sole in Diabetic Mellitus Patients: A Preliminary Study to Understand Ulcer Formation," International Journal of Biomedical and Clinical Engineering (IJBCE) 3, no.1: 1-17. http://doi.org/10.4018/ijbce.2014010101

Export Reference

Mendeley
Favorite Full-Issue Download

Abstract

This aricle evaluates and quantifies the biomechanical properties of the foot sole like – loss of protective sensation, hardness of the foot sole and pressure distribution parameter called Power ratio (PR) and its alterations, which have a direct effect on ulcer formation. A new parameter PRS Index is developed to understand the interplay between these parameters and its role in ulcer formation. All diabetic subjects attending the Diabetic foot clinic from Dec2003 to June 2007 undergo a standard foot examination.A total of 652 diabetic patients including 57 ulcer patients are taken for our study. The biomechanical properties include loss of protective sensation (LOPS) which is measured by 10 gm Semmes Weinstein Monofilament (SWMF). Hardness of the foot sole or absence of suppleness is tested using the Durometer (ASTM-D 2240 standards). Plantar pressure measurement is done using the PedoPowerGraph(p) which measures pressure distribution parameter PR. Foot wear properties like hardness of the insole affecting the formation of plantar ulcers was also measured. The above mentioned important parameters can be measured objectively and calculate PRS index value for diabetic with history of previous ulcer patients. We found a single entity of either the PR or shore independently cannot predict the risk for ulcer formation.In this study we found newPRS index value for diabetic with history of previous ulcer patients show significant correlation (i.e. p<0.05 level) between footwear shore and PRS index for history of previous ulcer patients. No significant correlation was shown for diabetic without history of previous ulcer patients and this may be due to diabetic patients are wearing footwear randomly with different degree Shore. From the case studies we found that the PRS index values and other biomechanical parameter of the foot sole can be reversed if the patients wear proper MCR footwear with 20 degree Shore. Use of appropriate footwear has shown that these easily measurable parameters and thus prevent ulcer formation as mentioned in the earlier studies. Several methods are used previously for predicting ulceration in DM patients. But in this study the new index PRS was studied and its role in predicting ulceration. Use of appropriate footwear will reverse the hypertrophic response; this can be quantified by the PRS index. We have found that there is decrease in PRS index by proper off loading the pressure using 20-degree shore MCR footwear.

Request Access

You do not own this content. Please login to recommend this title to your institution's librarian or purchase it from the IGI Global bookstore.