Dental Materials Journal
Online ISSN : 1881-1361
Print ISSN : 0287-4547
ISSN-L : 0287-4547
Mechanical Properties and Grindability of Experimental Ti-Au Alloys
Masatoshi TAKAHASHIMasafumi KIKUCHIOsamu OKUNO
Author information
JOURNAL FREE ACCESS

2004 Volume 23 Issue 2 Pages 203-210

Details
Abstract

Experimental Ti-Au alloys (5, 10, 20 and 40 mass% Au) were made. Mechanical properties and grindability of the castings of the Ti-Au alloys were examined. As the concentration of gold increased to 20%, the yield strength and the tensile strength of the Ti-Au alloys became higher without markedly deteriorating their ductility. This higher strength can be explained by the solid-solution strengthening of the α titanium. The Ti-40% Au alloy became brittle because the intermetallic compound Ti3Au precipitated intensively near the grain boundaries. There was no significant difference in the grinding rate and grinding ratio among all the Ti-Au alloys and the pure titanium at any speed.

Content from these authors
© The Japanese Society for Dental Materials and Devices
Previous article Next article
feedback
Top