Landslide Susceptibility Mapping Using GIS-based Vector Grid File ( VGF ) Validating with InSAR Techniques : Three Gorges , Yangtze River ( China )

A landslide susceptibility assessment for the Three Gorges (TG) region (China) was performed in a Geographical Information System (GIS) environment and Persistent Scatterer (PS) InSAR derived displacements were used for validation purposes. Badong County of TG was chosen as case study field. Landslide parameters were derived from two datasets. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Global Digital Elevation Map (GDEM) was used to calculate slope geometry parameters (slope, aspect, drainage, and lineament), while geology and vegetation cover were obtained from Landsat and ASTER data. The majority of historical landslides occurred in the sandstone-shale-claystone intercalations. It appears that slope gradients are more critical than other parameters such as aspect and drainage. The susceptibility assessment was based on a summation of assigned susceptibility scores (points) for each 30×30 m


Introduction
Landslides are natural processes that can be triggered directly or indirectly by natural and/or human activities.Natural activities include high rainfall, earthquakes and volcanic eruptions [1], and human activities include land-use change, deforestation, excavation, change in the slope profile, and irrigation [2].Indirect effects could result from changes in rainfall associated with an increase in surface water area.Landslides are devastating to human activities, thus predicting their occurrence and effect is critical.An established tool for this is Landslide Risk Maps (LRMs).LRMs is an outcome of Landslide Hazard Maps (LHMs), but producing both LRMs and LHMs requires information which may be difficult to obtain (such as detailed geological maps, landslide inventory maps, historical records, rainfall records and earthquake magnitudes).A practical alternate is a Landslide Susceptibility Map (LSMs).
LSMs map potential landslide areas [3].Landslide susceptibility is determined by several related, spatially-distributed factors (e.g.geology, slope angle, slope aspect, drainage, etc.), pertinent to instability.The landslide susceptibility of any area has usually been categorized in the range "stable to unstable", thus indicating landslide-prone areas [4,5].
Later, geoscientists in many countries started preparing landslide maps with the help of GIS [13][14][15].Up to now, many research and educational institutes and commercial companies have been offering information on geological hazards, particularly landslides.This arises from a widespread application of GIS and remote sensing techniques.Emergence of GIS applications in landslide map generation is critical by this time.
Various studies have been conducted on landslide susceptibility mapping [1,4,6,8,[15][16][17][18][19][20][21][22].A rating was determined taking into account the ratio of the total aspect and slope of topography and the aspect and slope of topography per grid interval where the landslide occurred in the Janghung area of South Korea.Finally, the rating was summed to calculate the landslide susceptibility index (LSI) per grid cell [16,17].Colorado State University proposed debris flow hazard susceptibility mapping at a scale 1:24.000,prepared using an algorithm taking into account the influence of factors such as slope angle, slope orientation, Unified Soil Classification System (USCS), clay content and clay"s geotechnical and erosive properties [23].With the help of a raster GIS, [24] used a weighting factor procedure to produce a landslide susceptibility map (LSM) in the Wondogenet area in the eastern Ethiopian rift.Landslide susceptibility assessments were performed using landslide occurrence data, and layers representing lithology, drainage network, geology, slope angle, slope aspect and vegetation cover.Weightings were assigned with regard to the observed landslide intensities for each class, resulting in LSMs.In this case, a landslide hazard map was subsequently created by overlaying the susceptibility maps; the values of each grid cell in the contributing layers were summed and divided by the total number of controlling parameters [3].Zhu et al. integrated human expertise on landslide-environment relationships with GIS under fuzzy logic.Geology, slope and strata, slope gradient, relative relief and slope shape were used as rule set to conduct landslide susceptibility in Three Gorges area (China) [25].Authors validated their analysis by examining the usefulness of the fuzzy membership values.They used 21 landslides and the computed fuzzy membership value for susceptibility at each site was obtained from the derived fuzzy membership map.
In recent decades, several studies on landslide susceptibility mapping have been carried out in Italy.Orthophotos of southern Italy were used to determine landslide areas to form landslide inventory maps [21].Magliulo et al. used lithology, landuse, slope gradient and aspect to prepare LSMs.These LSMs compared well with a geomorphological map.To obtain a LSM, a landslide occurrence map is required to evaluate landslide related data statistically.An occurrence map is used together with data such as geology, slope, aspect, drainage, etc. to determine potential landslide sites which have the same conditions as those on the occurrence map.Landslide susceptibility analysis requires a large amount of data as input, thus making high budgetary and time demands [20].Kıncal et al. carried out landslide susceptibility assessment in Izmir city (Turkey) using the variables of lithology, slope gradient, slope aspect, distance to drainage, distance to roads and distance to fault lines in logistics regression analysis.Lithology played the most important role in determining landslide occurrence and distribution on the basis of the provided coefficients [26].
Bai et al. prepared a detailed landslide susceptibility map in the Zhongxian segment in the Three Gorges area of China using logistic regression method with the help of Geographical Information Systems (GIS).Statistical relationships for landslide susceptibility were conducted using landslide and landslide triggering factors [27].Seed cells were used to be dependent variable in order to create a reliable logistic regression model.The seed cells were formed from landslide boundaries and represented the pre-failure undisturbed morphological conditions.Yilmaz et al. [used statistical index (Wi) method of Van Westen to conduct landslide susceptibility in Devrek (Zonguldak/Turkey) [28,29].Ten parameters of elevation, slope, aspect, profile curvature, plan curvature, distance to streams, drainage density, distance to ridges, distance to road and power line network, and lithology were used during the analyses.Seed cells of Süzen and Doyuran were used to define decision rules of slope instabilities and percentile class divisions [30].In all data sets authors used, elevation, lithology, slope aspect and drainage density were found as critical parameters for landslide occurrence.Chen et al. prepared a landslide susceptibility map in the Zigui segment of the Three Gorges area of China by using light detection and ranging (LiDAR) and logistic regression model (LRM) [31].After processing LiDAR & DMC data and geological maps and landslide-controlling factors were derived as landslide density, digital elevation model (DEM), slope angle, aspect, lithology, land use and distance from drainage.The likelihood ratio (LR) analysis then applied to find correlation between the landslide locations and landslide-controlling factors.Logistic Regression Model (LRM) was used to predict the occurrence of landslides.Wu et al. used rough sets and back-propagation neural networks (BPNNs) to map landslide susceptibility on the Zigui-Badong of the Three Gorges area [32].Landslide inventory map was prepared with the help of field works.Twenty-two landslide related parameters were created using topographical and geological maps, Landsat ETM+ and HJ-A satellite images.Elevation, slope, profile curvature, catchment aspect, catchment height, distance from drainage, engineering rock group, distance from faults, slope structure, land cover, topographic wetness index, and normalized difference vegetation index were used as independent variables set by the rough set and correlation coefficient analysis.Three layered and four layered BPNN were trained and used to obtain landslide susceptibility map.Kavzaoglu et al. prepared nine thematic maps associated with lithology, slope, aspect, land cover, drainage density, topographic wetness index, elevation, slope length and distance to road to create landslide susceptibility map with the help of multi-criteria decision analyses (MCDA) and support vector regression (SVR) methods for the province of Trabzon (Turkey) [33].Performances of the methods were compared with logistic regression model.Tehrany et al. used weights-of-evidence (WoE) model to assess the impact of classes of each conditioning factor on flooding through bivariate statistical analysis (BSA) [34].Their WoE model was integrated with SVM in order to enhance the performance of each method.Also, increasing the accuracy of the flood susceptibility map to properly manage the prone area of the floods, is aimed.Wu et al. used object based data mining methods were applied to a case study of landslide susceptibility assessment on the Guojiaba Town of the Three Gorges area [35].Eleven landslide related factors were extracted using satellite images, topographical and geological maps.These factors were calculated as independent variables using significance testing and correlation coefficient analysis including slope, profile curvature, engineering rock group, slope structure, distance from faults, land cover, tasselled cap transformation wetness index, reservoir water level, homogeneity, and first and second principal components of the images.Decision tree and SVM models were used to prepare landslide susceptibility map.Du et al. used support vector machine (SVM) to produce landslide susceptibility maps for the Daguan County of Zhaotong City (Yunnan Province/China) [36].Landslide conditioning parameters of slope angle, slope aspect, altitude, distance to faults, distance to rivers, and distance to roads, NDVI, rainfall and lithology were used during the analysis.SVM model was validated by using area under the curve (AUC) methods.The validation results authors obtained showed high accuracy (84.73%).
In this paper, we present a landslide susceptibility map as a case study for the Badong County in Three Gorges (TG) region of China to use geology, slope aspect, slope angle, drainage network, lineament and vegetation cover data from Landsat imagery, ASTER imagery and a GDEM to create a Vector Grid File (VGF) (= Vector pixel) based GIS model.Then, we compare this VGF-based LSM with the deformation signals derived using Persistent Scatter Interferometric Synthetic Aperture Radar (PS InSAR).

Study Area
The study area, located in the TG region (China, Figure 1), is well known for its dam construction.The TG dam is the largest water management project in the world today.The total catchment area of TG project is about 1.0×10 6 km 2 with 4.5×10 11 m 3 the average annual runoff [37].It is claimed that the main functions of the TG dam include flood control and hydro-electric power.This dam is the most important flood control project built on the Yangtze River.The flood season of the Yangtze River is between June and September during which 70% to 75% of the total annual rainfall occurs.Historical records show that 214 floods occurred in the Yangtze Valley between the beginning of the Han Dynasty (206 B.C.) and the end of the Qing Dynasty (1911 A.D.), i.e. about one per decade [38].Since the 1920s, flood hazards have threatened more than 1.5 million ha of crops, 15 million people and their properties and railway transportation.The normal water level and the total storage capacity of the dam are 175 m and 3.93×10 10 m 3 , respectively.The water level is reduced to 145 m to control any harmful effects of floods on the dam structure.
There are frequent precipitation-related hazards in the TG region.More than 30,000 people died in a huge flood on the Yangtze in 1954, in which 90 percent of the 30,000 deaths were disease related [40].At least 2,000 km 2 of farm land were flooded and more than 1,500 people lost their lives because of the flood in 1998 [41].In 2008, heavy precipitation led to serious storm and flood disasters such as the collapse or flooding of rural homes, destruction of cropland, heavy loss of livestock and poultry farms and damage to urban and rural roads [42].Other frequent natural hazards in this region are geological disasters, such as landslides and mud flows.It was reported that 34 counties in Chongqing had suffered from collapse, landslide and rock and mud flow [43].The impounding of the TG dam reservoir was started on April 1, 2003 [37].From this time, the water level of the Yangtze River rose and TG Dam Lake was created.Landsat images can be used to display water level change from 2000 to 2006 (Figure 2).Many landslides occurred near the water level of the Yangtze River and more than 97% of landslides were on the main channel of the TG region (Figure 2 and 3).Some landslides, such as those in Wanxian County where is nearly 190 km far from the study area in the southwest-west direction, occurred at different elevation ranges and with sliding surfaces following the nearly horizontal rock stratums (Figure 3) [45].Slope instabilities already threaten several new towns and the rising water level in the reservoir has the potential to trigger old instabilities as well as create new ones [39].

Figure 3. Elevation ranges of the old landslides that have occurred in Wanxian County (modified from [42]).
A field trip was carried out in the Badong County to check surface movements and cracks have occurred on the man-made structures (Figure 4).This field work showed that landslides in the area are still active.Cracks were recorded on some roads which were built in 2006 and 2007.The geological setting of the area consists of two major formations, a Pre-Sinian crystalline basement and a Sinian-Eocene sedimentary cover series (Carbonates, shales, sandstones and conglomerates) (modified from [46]).The crystalline basement is composed of metamorphic and magmatic rocks and the sedimentary cover is composed of interbedded sandstone, shale and claystone intercalations.
The Huangling anticline is the major folding system in the area.It is 50 km in length, lying to the southeast of Zigui, with Pre-Sinian metamorphic and magmatic rocks forming the fold"s core [39].The reason for building the TG Dam in its present location is the strength and stability of this anticlinal structure and the lack of any significant earthquakes in this area [37] (Figure 1).
The southern Zigui and Badong area is characterised by secondary faults, consistent with the ENE-WSW oriented fold system [47].Weak zones were formed by the secondary fault and fracture systems which trigger slope instability.

Datasets Used in This Study
A detailed investigation has been performed mainly involving remotely sensed Landsat ETM+ and ASTER images, SAR interferometric processing, LSM and validation.PS InSAR data was used to validate analyses performed.Our GIS-model is based on the information provided by ASTER and Landsat TM and ETM+ images, ASTER GDEM data, published literature and limited field observations.

ASTER Optical Imagery
Data from the NASA Earth Observing System (EOS) satellite-based instruments offer many resources for collecting high spatial and temporal resolution information related to urban and non urban areas.ASTER on board the Terra platform is well-suited for geological analysis [48].The ASTER instrument was built by Japan"s Ministry of Economy, Trade and Industry (METI) and launched onboard the NASA"s Terra spacecraft in December 1999.It has an along-track stereoscopic capability using its infrared spectral bands and its nadir-viewing and backward-viewing telescopes to acquire stereo images with a base-to-height ratio of 0.6.One nadir-looking ASTER Very Near Infrared (VNIR) scene consists of 4,100 samples by 4,200 lines [49].ASTER data can be used for analysing and investigating urban land cover/land-use and biophysical parameters such as biomass, spatial metrics and surface temperature/emissivity [50][51][52].In this study, two Terra ASTER Level 1A images acquired on July 17, 2000 and September 25, 2002 were used.

Landsat Optical Imagery
The Landsat Thematic Mapper (TM), a sensor carried onboard Landsats 4 and 5, has acquired images of the Earth from July 1982.The temporal resolution of TM is sixteen days [53].Landsat 7 was launched on April 5, 1999.The Earth observing instrument on Landsat 7, the Enhanced Thematic Mapper Plus (ETM+), extends the capabilities of the highly successful Thematic Mapper instruments on Landsat 4 and 5 [54].The scene size is 170 km in the north-south and 183 km in the east-west directions.Landsat images have been resampled using cubic convolution (CC).Four Landsat images acquired on April 17, 1987, May 14, 2000, November 6, 2000 and September 12, 2006 were used in this study (Table 1).Landsat images were used in this study to map water level changes of the Yangtze River and prepare geological and vegetation maps.

ASTER GDEM
ASTER GDEM (Version 1) was used in this study to prepare the maps of slope angle, slope aspect, drainage, and lineament.
Independent research was conducted using GPS survey benchmarks to assess the absolute vertical accuracy of ASTER GDEM in different geographical regions over China [55].In the TG region, the coordinates of 121 GPS survey stations were obtained with centimetre level accuracy (Figure 7.a), and then a correlation analysis between GPS and ASTER GDEM was performed.A correlation of 0.97, a mean difference of -5.9 metres and a RMS value of 12.1 metres were observed [56] (Figure 7.b).

Methods
Methods can be divided into six stages: (i) determination of variables relevant to landslide susceptibility; (ii) preparation of thematic maps using variables, (iii) extraction of spatial information to generate a Vector Grid File (VGF) having 30 x 30 metres resolution, (iv) preparation of a LSM using the VGF and (v) preparation of a thematic deformation map using Persistent Scatterer (PS) InSAR techniques and (vi) a comparison of (iv) and (v) (Figure 8).
After visual interpretation of Landsat and ASTER images to extract geological outcrop boundaries in the study area, these outcrops were regrouped based on lithological attributes rather than their stratigraphic content and age [18,30].Many researchers involve lithology as a factor in susceptibility mapping [57][58][59][60][61][62][63].Vector Grid File (VGF) based GIS model was created to determine the LSM for the Three Gorges, Yangtze River (China) site.Then, this LS map is validated with InSAR results.
An aspect hazard map was prepared according to whether the aspect of the slope inclined towards the Yangtze River.This aspect map was classified into 8 classes according to aspect directions of 0-45, 45-90, 90-135, 135-180, 180-225, 225-270, 270-315 and 315-360.For the southern slopes of the Yangtze River, an aspect zone of 315-45 was chosen and for the northern slopes of the Yangtze River, an aspect zone of 135-225 was chosen as the critical aspect zones for landslides (Figure 8 and 9).

Figure 8. The processing of the data-sets used to obtain LSM. Flow chart of the study ((i) determination of variables relevant to landslide susceptibility; (ii) preparation of thematic maps using variables, (iii) extraction of spatial information to generate a Vector Grid File (VGF) having 30 x 30 metres resolution, (iv) preparation of a LSM using the VGF and (v) preparation of a thematic deformation map using Persistent Scatterer (PS) InSAR techniques).
Lineaments were digitised as geological structures.The distance to the lineament map (lineament buffer map) signifies the presence of joint-fractures affecting shear strength [18,30].Buffer zones were created for distances of 0-50, 50-100 and 100-200 metres for each lineament feature (Figure 8).
The drainage network was digitized from generated contours using ASTER G-DEM data [65].After digitising, buffer zones were created at 0-50, 50-100 and 100-200 metres for each drainage channel (Figure 9b).Also, water level in 2006 digitized from a Landsat image, was considered during the drainage buffer analysis, as later described.A vegetation map was prepared using the Normalized Difference Vegetation Index (NDVI) calculation in the range between -1 and 1. Forest, agricultural fields, barren land, water and wet areas are the main land cover classes determined from this image.The NDVI map was classified as water (-1.00 to -0.01), wet areas (0.00 to 0.32), barren land (0.33 to 0.63), intermediate vegetation (0.64 to 0.76) and dense vegetation (0.77 to 1.00).A high susceptibility score was given to barren land and a low score to forested land.
In an approach developed by [66], spatial information for all map layers saved in a database related to landslide potential was produced.An overlay technique was used to combine data from a number of maps in order to prepare a new map that is termed a "VGF-based LSM".For the preparation of the susceptibility map, raster background images (e.g.geological maps derived from satellite imagery) were digitized to form geology layers.Then, all digital thematic maps (geology, slope angle, slope aspect, drainage, lineament, vegetation) were converted to vector pixels from a dataset of all digital maps [66].GIS enables end users to carry out a complete land-use planning and seismic-risk assessment at regional, sub-regional and local scales [67].All analyses for the present study were carried out at a sub-regional scale.
A Vector Grid File (VGF), containing 132.692 vector areas (or "vector pixels") of size 30×30 m was created using the "Grid Maker" command (of MapInfo Professional) to cover the Badong County (see Figure 10).Then, columns were inserted into the VGF file"s attribute databaseone for each digital raster map.Next, each digital thematic map was overlaid on the new blank VGF.
A susceptibility score was assigned to the database for each map pixel as suggested by [24] and [68] (Table 3).Then the VGF susceptibility score was calculated according to Equation ( 1) San: Slope Angle, Sas: Slope Aspect, Lit: Lithology, Lin: Lineament, Dra: Drainage, Veg: Vegetation.A LSM was prepared using the total number of VGF susceptibility points (scores) (Figure 11).The LSM has been obtained by reclassifying the values obtained by means of Eq. ( 1) into three categories: High, Medium and Low.
A deformation map was then created using PS InSAR results.The prepared LSM and the PS InSAR deformation results are compared in Section 6.

Landslide Susceptibility Analysis
LSMs are a special type of engineering geological maps, and present all the components of the geological and geo-morphological environment.Such maps should be based on the combination of all relevantmainly engineering geologicalparameters.This combination can be realized by using an overlay process in the GIS environment, which is perhaps one of the key functions of a GIS; it allows for construction of a new integrating layer [69].One can distinguish three major categories of approaches to GIS-based land-use suitability analysis in the literature: (1) computer-assisted overlay mapping, (2) multi-criteria evaluation methods, and (3) soft computing or geo-computation methods [70].Overlay with a weighting technique was used during the landslide susceptibility analysis.Point scores were assigned according to sliding susceptibilities as defined in Table 3 and 4. If the unit cell in the VGF is more susceptible to sliding, then a high point (score) is given, otherwise a low one is assigned [71,72].Categories (1) and ( 2) are performed in this study as other scientists did.But, different point scores to the areas which have different type of susceptibility class are given in this study and VGFbased technique is a novel in this case study area.For this purpose, the existing landslide inventory map of the study area was used in order to perform a zonation of land units similarly prone to generate landslides or in order to quantitatively validate the obtained susceptibility map.There is no doubt that landslides will be seen along the slopes of the Yangtze River.Slope angle and slope aspect maps were prepared to determine landslide susceptibility analysis zones (Figure 10).As already stated, the vector grid file (VGF) is made up of 132,697 cells (Figure 10) with the dimension of each cell being 30 x 30 m (Table 3 and 4).Table 4. Database example.Vector grid layer created using geology, slope angle, slope aspect, drainage, lineament and vegetation cover maps for fifteen vector pixels (LQ177-LQ188).Point scores (weighting factors) were given to the "slope angle" categories according to their landslide susceptibilities as follows: ten points for 0-10; twenty points for 11-30; and, thirty points for >31, respectively.
Point scores (weighting factors) were given to the "lithology" categories according to their landslide susceptibilities with ten points for bedded limestone, massive limestone and Presinian metamorphic and magmatic rocks, and thirty points for sandstone-shale-claystone intercalations.
Point scores (weighting factors) were given to the "lineament" and "drainage" categories according to their landslide susceptibilities as five, ten and fifteen for 0-50, 50-100 and 100-200 metres distance from the river bed, respectively.
Point scores (weighting factors) were given to the "vegetation" categories according to their landslide susceptibilities as ten points for the barren field, ten points for the less vegetation zones and zero-point for dense vegetation zones (Table 3).
Finally, all susceptibility point scores in the six columns were summed and a column named "Total" created in the database (Equation 1).The LSM was created as a thematic map based on the total value of these point scores after applying the relevant weighting factors.76 ≤ Landslide Susceptibility => High landslide susceptibility zone 36 ≤ Landslide Susceptibility < 76 => Moderate landslide susceptibility zone Landslide Susceptibility < 36 => Low landslide susceptibility zone Classes were divided into three categories with the help of the landslide inventory map and statistical natural breaks of the total point range data (Figure 11).
The susceptibility of each "vector pixel" to landslides is displayed in Figure 11 with an explanation of low to high landslide susceptibility.Areas of high susceptibility are categorised by steep slope gradients with a "soft" sandstone-shale-claystone intercalations lithology.Smaller features with high susceptibility values observed in the map generally correspond to lineaments and/or drainage network.A LSM is considered to be categorised if it shows three susceptibility zones: (a) high, (b) moderate and (c) low landslide potential zones (Figure 11).

Validation of LSMs with PS InSAR Derived Deformation Map
Interferometric SAR (InSAR) has been used to map surface displacements of the Earth"s surface by calculating the phase differences in complex representations (magnitude and phase).Synthetic Aperture Radar (SAR) images are acquired under similar geometric conditions but at different acquisition dates [73].The sources of error for conventional InSAR principally include atmospheric water vapour effects and temporal decorrelation [74].Several approaches have been developed to address these two issues.Ferretti et al. proposed Permanent Scatterers InSAR improved by Colesanti et al. and by Kampes [75][76][77][78].In these methods, the amplitude information of a group of PS candidates are analysed using a series of interferograms.These methods work well in urban areas where corner-like reflecting objects appear bright in SAR images.But these methods do not turn out very well in natural terrain because of the absence of man-made structures [56].The second approach identifies PS pixels primarily on phase characteristics as demonstrated by Hooper et al. [79,80].This method can find low-amplitude but stable pixels that cannot normally be identified using only amplitude data.
Persistent Scatterer (PS) InSAR supports users with reliable deformation measurements by identifying single coherent pixels using a long temporal series of interferograms and estimating atmospheric signals [76].
In this study, the StaMPS package was used to process 13 ENVISAT images from descending track 075 collected between November 2003 and March 2008 [79].The comparison between two adjacent tracks shows the PS derived deformation map is reliable with a RMS of 0.41 mm [56].
To evaluate the GIS-model, PS-InSAR derived deformation signals were overlaid on the susceptibility map.In Figure 10, grey points represent stable pixels, purple points indicate subsidence pixels and blue points imply uplift pixels.It should be noted that the density of PS-InSAR points does not show the magnitude of deformation; substantial clusters of PS-InSAR points merely correspond to more populated areas (e.g.houses indicated in white in Figure 12) which possibly exhibit high radar backscatter values from man-made buildings.A simple spatial analysis of Ikonos imagery reveals that 13.5 % of PS points are located on tops of buildings.
Although PS points are limited to points with good coherence from a long series of interferograms, there is a good correspondence of points with the GIS-based susceptibility model.It is clear in Tables 5 that 84.8% of the subsidence deformation points are located in areas classified by the GIS-model as moderately and highly susceptible to landslides.

Conclusions
In this case study, a LSM generated for the Badong County, TG of China, using information layers derived from satellite optical images (specifically ASTER and Landsat) and ASTER GDEM, which agrees well with our PS InSAR derived deformation maps.Both suggest that 59.8% of the study area is classified as "Highly susceptible to landslides", and 19.4% of this is cl assified as "moderately susceptible to landslides" (Figure 12).84.8% of the subsidence PS-InSAR points were calculated in moderately and highly susceptible landslide zone.Landslides which have occurred do indeed show in the "High landslide susceptibility zone" of the LSM prepared in this case study (Figure 13) [44].
A VGF was created to calculate a GIS-based analysis with 30 meters accuracy.For local scales, this resolution can be increased depending on the scales of the digital thematic maps prepared.
As a result, the investigated case study site of Badong County can be considered an active landslide area with the help of PS InSAR data and field observations.Landslides can be re-activated by the land-use changes which are now happening in Badong County.New landslides may occur in the area classified as "high landslide susceptible zone" in the LSM if preventive measures are not met against the triggering effect of reactivated fossil landslides.Mass movements, other than landslides, such as planar, wedge and toppling forms should also be analyzed in the future, after obtaining relevant detailed field data.

Perspective
This work can be used in landslide susceptibility mapping studies if a vector-based database is available.Also, the weighting of each digital thematic layer on landslide susceptibility is scored in this case study.Authors who have score points for different geo-referenced areas could use this work in their studies.Vector-pixel based landslide susceptibility analyses has more advantages then rasterpixel based one.We suggest geoscientists to use this work in their scientific studies to obtain fast and reliable results during their landslide susceptibility analysis.

Figure 2 .
Figure 2. Water level change in the Yangtze River in the years 2000 and 2006.(Locations of the large landslides were extracted from [44]).

Figure 4 .
Figure 4. (a) A view of surface cracks seen in a landslide field in Badong County; (b) Surface displacements observed in a landslide field in Badong County.

Figure 5 .
Figure 5. ASTER 321 false color composite view of the study area (The ASTER image was acquired in 25 th of September, 2002).

Figure 6 .
Figure 6.Geological map of the Three Gorges Project area extracted from Landsat TM/ETM+ and ASTER images.

Figure 7 .
Figure 7. (a) Shaded relief map of the study area in Three Gorges with the locations of Static GPS points plotted on the ASTER GDEM.Red circles represent GCPs.(b) Scatterplot of ASTER GDEM and Static GPS heights in Three Gorges.The dashed line represents the line of perfect fit [55].

Figure 9 .
Figure 9. (a) ASTER GDEM of the study area, (b) Vector drainage network of the study area (c) Slope angle map of the Badong County, (d) Aspect map of the Badong County.

Figure 10 .
Figure 10.Thematic map prepared using the VGF file for slope angle.

Figure 11 .
Figure 11.Landslide susceptibility map of the Badong County in the Three Gorges Region.

Figure 12 .
Figure 12.Landslide Susceptibility Map overlaid with PS InSAR derived deformation signals (Locations of the large landslides were extracted from [44]).

Figure 13 .
Figure 13.Landslides which were occurred previously as observed in the "High Landslide Susceptibility Zone" (Locations of the large landslides were taken from [44]).