[1] ZHOU J,GOODALL R,REN L,et al. Influences of car body vertical flexibility on ride quality of passenger railway vehicles[J]. Proceedings of the Institution of Mechanical Engineers,Part F:Journal of Rail and Rapid Transit,2009,223(5):461-471. [2] SUZUKI Y,AKUTSU K. Theoretical analysis of flexural vibration of car body[J]. QR of RTRI,1990,31(1):42-48. [3] DIANA G,CHELI F,COLLINA A,et al. The development of a numerical model for railway vehicles comfort assessment through comparison with experimental measurements[J]. Vehicle System Dynamics,2002,38(3):165-183. [4] 李凡松,王建斌,石怀龙,等. 动车组车体异常弹性振动原因及抑制措施研究[J]. 机械工程学报,2019,55(12):178-188. LI Fansong,WANG Jianbin,SHI Huailong,et al. Research on causes and countermeasures of abnormal flexible vibration[J]. Journal of Mechanical Engineering,2019,55(12):178-188. [5] 贾焕英,蔡彦强. 高速动车组地板系统的分析研究[J]. 铁道机车车辆,2013(5):36-39. JIA Huanying,CAI Yangqiang. Research on the floor structure of high-speed EMU[J]. Railway Locomotive and Car,2013,33(5):26-28. [6] DAO Gong,KANG Wang,YU Duan. Car body floor vibration of high-speed railway vehicles and its reduction[J]. Journal of Low Frequency Noise Vibration and Active Control,2019,7(1):1151-1159. [7] PARK J,HA T,KIM H. Finite element modeling and experimental verification of lightweight steel floor vibration[J]. Journal of Vibro-engineering,2016,18(3):1435-1443. [8] WENNBERG D,STICHEL S,WENNHAGE P. Substitution of corrugated sheets in a railway vehicle's body structure by a multiple-requirement based selection process[J]. Proc IMechE,Part F:J Rail Rapid Transit. 2014,228:143-157. [9] WANG Q,ZENG J,WEI L,et al. Reduction of vertical abnormal vibration in carbodies of low-floor railway trains by using a dynamic vibration absorber[J]. Proceedings of the Institution of Mechanical Engineers,Part F:Journal of Rail and Rapid Transit. 2017,232(5):1437-1447. [10] STANDARD U. Guidelines for evaluating passenger comfort in relation to vibration in railway vehicles[S]. International Union of Railways,1994. [11] 尤泰文,周劲松,任利惠,等. 车辆整备状态车体垂弯频率优化方法研究[J]. 振动与冲击,2017(8):86-91. YOU Taiwen,ZHOU Jinsong,REN Lihui,et al. Optimal design of modal frequencies for railway vehicle car-bodies[J]. Journal of Vibration and Shock,2017(8):86-91. [12] 王跃辉,王民. 金属切削过程颤振控制技术的研究进展[J]. 机械工程学报,2010,46(7):166-174. WANG Yuehui,WANG Min. Advances on machining chatter suppression research[J]. Journal of Mechanical Engineering,2010,46(7):166-174. [13] 刘耀宗,郁殿龙,赵宏刚,等. 被动式动力吸振技术研究进展[J]. 机械工程学报,2007(3):14-21. LIU Yaozong,YU Dianlong,ZHAO Honggang,et al. Review of passive dynamic vibration absorbers[J]. Journal of Mechanical Engineering,2007,43(3):14-21. [14] 徐振邦,龚兴龙,陈现敏. 机械式频率可调动力吸振器及其减振特性[J]. 振动与冲击,2010,29(2):1-6. XU Zhenbang,GONG Xinglong,CHEN Xianmin. Mechanical vibration absorber with tunable resonant frequency and its vibration attenuation characteristics[J]. Journal of Vibration and Shock,2010,29(2):1-6. [15] ZHU S,YANG J,YAN H,et al. Low-frequency vibration control of floating slab tracks using dynamic vibration absorbers[J]. Vehicle System Dynamics,53(9):1296-1314. [16] KIM,SUNG Y,CHEOL H. Optimum design of linear multiple tuned mass dampers subjected to white-noise base acceleration considering practical configurations[J]. Engineering Structures,2018,171:516-528. [17] ORMONDROYD J,HARTOG D. The theory of the dynamic vibration absorber[J]. ASME Journal of Applied Mechanics,1928,1928:A9-A22. [18] RADE D A.,STEFFEN V,Optimization of dynamic vibration absorbers over a frequency band. Mechanical Systems and Signal Processing,2000,14(5):679-690. |