Abstract
Dose uniformity is a key quality element of drugs. The purpose of this study was to demonstrate a practical approach to evaluate the breakability robustness as part of the tabletting validation of a scored tablet. The influence of operational compression parameters (speed and force) on the weight variabilities of half- and quarter-tablets was investigated using two types of cross-scored round tablets of identical composition but different in size. It was shown for the used veterinary model tablet that manufacturing variation of two compression parameters around the defined target values do not significantly influence the weight variability of the broken tablets. The empirical guidance was also confirmed that for the investigated dose-proportional tablets the standard deviation of the broken tablet-part weight is linearly related to the original tablet weight. There exists a strong correlation between the variability of half-tablets and of quarter-tablets: the theoretical model previously presented was refined, demonstrating that the additional variance induced by breaking is a linear function of the break-line length. As a consequence, the standard deviation of half- and quarter-parts of cross-scored round tablets, expressed in mass units, will thus remain approximately identical. Hence, the relative standard deviation (RSD) of quarter-tablet weights will nearly double when breaking half-tablets into quarter-tablets.
Recommended Citation
De Spiegeleer, B.; Van Vooren, L.; Thonissen, T.; Joye, P.; Cornelissen, B.; Lammens, G.; and Slegers, G.
(2005)
"Mass uniformity: Influence of operational compression conditions of breakability of scored tablets as part of manufacturing robustness evaluation,"
Journal of Food and Drug Analysis: Vol. 13
:
Iss.
1
, Article 10.
Available at: https://doi.org/10.38212/2224-6614.2554
