유한요소해석 및 다구찌법을 이용한 형상인발제품 치수정도 및 진직도 향상을 위한 다이스각 최적화

이상곤; 이재은; 김병민

주제분류

...

저널정보

저자정보

이용수
내서재: 1

내서재에 추가
되었습니다. 내서재에서
삭제되었습니다.

초록·키워드

오류제보하기

Recently, rods having irregular sections more complex than a rectangle or ellipse are necessary to produce mechanical parts. The cold shaped drawing process is used to obtain shaped drawn products with high levels of dimensional accuracy and quality. A cross roller guide, considered in this study, is one of the parts produced by shaped drawing process. A cross roller guide has a linear bearing system that rolls along a guide way. A cross roller guide is one of the most important components in terms of equipment because the quality of the product influences the precision linear motion. Therefore, the final dimensional accuracy of the linear rail in the shaped drawing is very important. The objective of this study is to find the optimized die angles to improve the dimensional accuracy and straightness of the final shaped drawn product. In order to achieve the aim of this study, design of experiment, FE-simulation, and the Taguchi method were used. Based on the analytical results, shaped drawing experiment has been performed to verify the result.

#Shaped Drawn Product(형상인발제품) #Dies Angle(다이스각) #Dimensional Accuracy(치수정도) #Design of Experiment(실험계획법) #FE-Simulation(유한요소해석) #Taguchi Method(다구찌법)