Preliminary Technological and Environmental Considerations for Generating Mechanical Components using Plant-based UV Resin

Vasilescu, Mircea Dorin

Mircea Dorin Vasilescu

Preliminary Technological and Environmental Considerations for Generating Mechanical Components using Plant-based UV Resin

Abstract:
The scope of this paper is to determine the evolution of the dimensional value of the part and to study if there is gas and particle emission produced by the plant-based resin in the 3D printing process with mask stereolithography. For dimensional measurement, a solution with digital calliper is used. For the measurement of emission, two devices are used for indoor air quality. In the vertical direction of part body printed, it is possible to observe a descending linear type of direction with a minimum value at the highest element 3D printed. The data taken into account in this study are mathematically studied using the EXCEL regression equation for dimension. The gases emitted are measured with the booth devices in parallel for formaldehyde and volatile organic compound gases. For CO2 and particles, one of these devices is used. The air quality index was determined in relation to CO2 and, respectively, particle emitted. In the printing process, an increase in CO2 emission of 500 ppm can be observed in the initial phase of the process and a lower value in the body area. It is possible to consider that the quality air in 3D printing with plant-based clear resin is in the good to medium level from all types of emission. These data were put in ac-cordance with the level value offered by the manufacturer of the measuring devices. In this study the dimensional aspects are evaluated in parallel for two types of part bodies and the dimensional equations are the same after three mount times.

Keywords:
biomaterials; sensors for gas or particle; 3D printing; polymer processingword 3

Issue: 2022 Volume 59, Issue 3

Pages: 245-257

Publication date: 2022/10/3

https://doi.org/10.37358/MP.22.3.5618

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
VASILESCU, M.D., , Preliminary Technological and Environmental Considerations for Generating Mechanical Components using Plant-based UV Resin, Mater. Plast., 59(3), 2022, 245-257. https://doi.org/10.37358/MP.22.3.5618

Vancouver
Vasilescu MD. Preliminary Technological and Environmental Considerations for Generating Mechanical Components using Plant-based UV Resin. Mater. Plast.[internet]. 2022 Jul;59(3):245-257. Available from: https://doi.org/10.37358/MP.22.3.5618

APA 6th edition
Vasilescu, M.D., (2022). Preliminary Technological and Environmental Considerations for Generating Mechanical Components using Plant-based UV Resin. Materiale Plastice, 59(3), 245-257. https://doi.org/10.37358/MP.22.3.5618

Harvard
Vasilescu, M.D., (2022). 'Preliminary Technological and Environmental Considerations for Generating Mechanical Components using Plant-based UV Resin', Materiale Plastice, 59(3), pp. 245-257. https://doi.org/10.37358/MP.22.3.5618

IEEE
M.D. Vasilescu, "Preliminary Technological and Environmental Considerations for Generating Mechanical Components using Plant-based UV Resin". Materiale Plastice, vol. 59, no. 3, pp. 245-257, 2022. [online]. https://doi.org/10.37358/MP.22.3.5618

Text
Mircea Dorin Vasilescu,
Preliminary Technological and Environmental Considerations for Generating Mechanical Components using Plant-based UV Resin,
Materiale Plastice,
Volume 59, Issue 3,
2022,
Pages 245-257,
ISSN 2668-8220,
https://doi.org/10.37358/MP.22.3.5618.
(https://revmaterialeplastice.ro/Articles.asp?ID=5618)
Keywords: biomaterials; sensors for gas or particle; 3D printing; polymer processingword 3

RIS
TY - JOUR
T1 - Preliminary Technological and Environmental Considerations for Generating Mechanical Components using Plant-based UV Resin
A1 - Vasilescu, Mircea Dorin
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2022
VL - 59
IS - 3
SP - 245
EP - 257
UR - https://doi.org/10.37358/MP.22.3.5618
KW - biomaterials; sensors for gas or particle
KW - 3D printing
KW - polymer processingword 3
ER -

BibTex
@article{MatPlast2022P245,
author = {Vasilescu Mircea Dorin},
title = {Preliminary Technological and Environmental Considerations for Generating Mechanical Components using Plant-based UV Resin},
journal = {Materiale Plastice},
volume = {59},
number = {3},
pages = {245-257},
year = {2022},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.22.3.5618},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5618}
}

Download article Citations: