@article{ART003011329},
author={
Hediye Aydin and
M. Ahmet Söyler
},
title={Investigation of microstructure and wear properties of AISI M2 high speed steel nozzles coated with different hard coatings (TiN, CrN, AlCrN, AlTiN and AlTiN) by PVD method},
journal={Journal of Ceramic Processing Research},
issn={1229-9162},
year={2023},
volume={24},
number={5},
pages={796-801},
doi={10.36410/jcpr.2023.24.5.796},
url={http://dx.doi.org/10.36410/jcpr.2023.24.5.796}
TY - JOUR
AU - Hediye Aydin
AU - M. Ahmet Söyler
TI - Investigation of microstructure and wear properties of AISI M2 high speed steel nozzles coated with different hard coatings (TiN, CrN, AlCrN, AlTiN and AlTiN) by PVD method
T2 - Journal of Ceramic Processing Research
PY - 2023
VL - 24
IS - 5
PB - 한양대학교 청정에너지연구소
SP - 796-801
SN - 1229-9162
AB - High-speed steels (HSS) have high hardness, toughness, shock resistance, and wear resistance at room and increasedtemperatures due to their high ratio of alloy elements. Even though the low wear resistance compared with cemented carbidesis a significant disadvantage, recent advances in surface technologies have increased surface hardness and wear resistance. Inthe present study, the “cathodic arc vapor deposition” method from among the PVD coating methods was used for coatingthe sample surfaces of the glaze spray nozzles prepared using AISI M2 high-speed steel material prepared with TiN, AlCrN,AlCrTiN, and AlTiN. Scanning electron microscope (SEM) was used to identify that the coatings display a homogeneous andcrack-free distribution. The micro-hardness of AISI M2 high-speed steel-coated ceramic coatings was also investigated.
Accordingly, the highest hardness value was obtained for the TiN-coated sample, whereas the lowest hardness value wasobtained for the AlCrTiN-coated sample. The ball-on-disc method was used to compare the wear characteristics of thesamples, considering the distance from the coatings until fracture. When the wear resistance of the coated samples wasexamined, it was observed that the most significant increase was obtained in AlCrN coated sample compared with the originalsample.
KW - AISI M2 steel, Wear resistance, Ceramic based coatings, Physical Vapor Deposition Method (PVD).
DO - 10.36410/jcpr.2023.24.5.796
UR - http://dx.doi.org/10.36410/jcpr.2023.24.5.796
ER -
Hediye Aydin
and
M. Ahmet Söyler
(2023). Investigation of microstructure and wear properties of AISI M2 high speed steel nozzles coated with different hard coatings (TiN, CrN, AlCrN, AlTiN and AlTiN) by PVD method. Journal of Ceramic Processing Research,
24( 5),
796- 801.
Hediye Aydin
and
M. Ahmet Söyler
. 2023,
“Investigation of microstructure and wear properties of AISI M2 high speed steel nozzles coated with different hard coatings (TiN, CrN, AlCrN, AlTiN and AlTiN) by PVD method”,
Journal of Ceramic Processing Research,
vol. 24, no. 5,
pp. 796-801.
Available from: doi:10.36410/jcpr.2023.24.5.796
Hediye Aydin
M. Ahmet Söyler
et al.
“Investigation of microstructure and wear properties of AISI M2 high speed steel nozzles coated with different hard coatings (TiN, CrN, AlCrN, AlTiN and AlTiN) by PVD method” Journal of Ceramic Processing Research
24.5
pp. 796-801 (2023): 796.
Hediye Aydin
,
M. Ahmet Söyler
. Investigation of microstructure and wear properties of AISI M2 high speed steel nozzles coated with different hard coatings (TiN, CrN, AlCrN, AlTiN and AlTiN) by PVD method Journal of Ceramic Processing Research [Internet]. 2023;
24( 5),
: 796-801.
Available from: doi:10.36410/jcpr.2023.24.5.796
Hediye Aydin
and
M. Ahmet Söyler
. “Investigation of microstructure and wear properties of AISI M2 high speed steel nozzles coated with different hard coatings (TiN, CrN, AlCrN, AlTiN and AlTiN) by PVD method” Journal of Ceramic Processing Research
24, no.5
(2023): 796-801. doi: 10.36410/jcpr.2023.24.5.796