@article{ART002850654},
author={
Seenivasan Murugesan and
Venugopal Thangamuthu and
Rohokale Milind Shivaji and
Suresh Kumar R
},
title={Experimental investigation and optimization for surface roughness for turning of AISI 1040 steel},
journal={Journal of Ceramic Processing Research},
issn={1229-9162},
year={2022},
volume={23},
number={3},
pages={367-372},
doi={10.36410/jcpr.2022.23.3.367},
url={http://dx.doi.org/10.36410/jcpr.2022.23.3.367}
TY - JOUR
AU - Seenivasan Murugesan
AU - Venugopal Thangamuthu
AU - Rohokale Milind Shivaji
AU - Suresh Kumar R
TI - Experimental investigation and optimization for surface roughness for turning of AISI 1040 steel
T2 - Journal of Ceramic Processing Research
PY - 2022
VL - 23
IS - 3
PB - 한양대학교 청정에너지연구소
SP - 367-372
SN - 1229-9162
AB - In turning operation the effectiveness of the process is completely governed by the selection of the proper tool and its geometry.
The right selection of tool geometry will provide optimized turning process parameters for minimizing the surface roughness.
This work focuses on optimization of the surface roughness using response optimization while turning AISI1040 steel. Toolinserts are used to position the cutting tool and the tool geometries are considered as the process parameters. The minimizationof the surface roughness is considered. 27 experiments are conducted and the surface roughness is measured and optimizedusing the taguchi technique. The main effects plots and ANOVA table are discussed in this work. Also response optimizationis carried out and the composite desirability is determined and analysed.
KW - AISI 1040, Tool geometry, ANOVA, Taguchi, Optimization, Surface quality.
DO - 10.36410/jcpr.2022.23.3.367
UR - http://dx.doi.org/10.36410/jcpr.2022.23.3.367
ER -
Seenivasan Murugesan
,
Venugopal Thangamuthu
,
Rohokale Milind Shivaji
and
Suresh Kumar R
(2022). Experimental investigation and optimization for surface roughness for turning of AISI 1040 steel. Journal of Ceramic Processing Research,
23( 3),
367- 372.
Seenivasan Murugesan
,
Venugopal Thangamuthu
,
Rohokale Milind Shivaji
and
Suresh Kumar R
. 2022,
“Experimental investigation and optimization for surface roughness for turning of AISI 1040 steel”,
Journal of Ceramic Processing Research,
vol. 23, no. 3,
pp. 367-372.
Available from: doi:10.36410/jcpr.2022.23.3.367
Seenivasan Murugesan
Venugopal Thangamuthu
et al.
Rohokale Milind Shivaji
Suresh Kumar R
“Experimental investigation and optimization for surface roughness for turning of AISI 1040 steel” Journal of Ceramic Processing Research
23.3
pp. 367-372 (2022): 367.
Seenivasan Murugesan
,
Venugopal Thangamuthu
,
Rohokale Milind Shivaji
,
Suresh Kumar R
. Experimental investigation and optimization for surface roughness for turning of AISI 1040 steel Journal of Ceramic Processing Research [Internet]. 2022;
23( 3),
: 367-372.
Available from: doi:10.36410/jcpr.2022.23.3.367
Seenivasan Murugesan
,
Venugopal Thangamuthu
,
Rohokale Milind Shivaji
and
Suresh Kumar R
. “Experimental investigation and optimization for surface roughness for turning of AISI 1040 steel” Journal of Ceramic Processing Research
23, no.3
(2022): 367-372. doi: 10.36410/jcpr.2022.23.3.367