@article{ART002580777},
author={
Jieguang Song
and
Yue Liu
and
Chunxiao Wu
and
Xueqing Yang
and
Huihui Luo
and
Chunyan He
and
Chengbin Li
and
Haizhen Yang
},
title={
Preparation and properties of coated silica/aluminum cermet materials via powder metallurgy method
},
journal={
Journal of Ceramic Processing Research
},
issn={1229-9162},
year={2020},
number={2},
pages={143 - 147},
doi={10.36410/jcpr.2020.21.2.143},
url={http://dx.doi.org/10.36410/jcpr.2020.21.2.143}
TY - JOUR
AU - Jieguang Song
AU - Yue Liu
AU - Chunxiao Wu
AU - Xueqing Yang
AU - Huihui Luo
AU - Chunyan He
AU - Chengbin Li
AU - Haizhen Yang
TI - Preparation and properties of coated silica/aluminum cermet materials via powder metallurgy method
T2 - Journal of Ceramic Processing Research
PY - 2020
VL - 21
IS - 2
PB - 한양대학교 청정에너지연구소
SP - 143 - 147
SN - 1229-9162
AB - Cermet is a combination of metal and ceramic, it exhibits some special properties, so it is one of the most widely usedengineering materials. In this paper, the properties of encapsulated SiO2/Al cermet were prepared by powder metallurgymethod. Results showed that the density of SiO2/Al cermet is increased with an increasing Al content. When the Al contentis high, and the high temperature is sintered, the liquid phase can fully bond the surrounding SiO2 particles to form a relativelycontinuous and dense structure, thereby obtaining a high microstructure density. When the SiO2:Al ratio is increased from 1:1to 1:3, the hardness is gradually increased. The hardness and density of the sample are gradually increased with an increasingmolding pressure. The surface hardness of the cermet is increased first and then decreased with an increasing sinteringtemperature. When the SiO2:Al ratio is 1:3, the holding time is 10 min under molding pressure of 15 MPa, and the sinteringtemperature is 900 °C for 1 h, the surface hardness of the obtained coated SiO2/Al cermet is high, the value is 175.2 HV.
KW - Cermet, aluminum, silica, surface hardness, powder metallurgy method.
DO - 10.36410/jcpr.2020.21.2.143
UR - http://dx.doi.org/10.36410/jcpr.2020.21.2.143
ER -
Jieguang Song
,
Yue Liu
,
Chunxiao Wu
,
Xueqing Yang
,
Huihui Luo
,
Chunyan He
,
Chengbin Li
and
Haizhen Yang
(2020).
Preparation and properties of coated silica/aluminum cermet materials via powder metallurgy method.
Journal of Ceramic Processing Research,
21(2),
143 - 147.
Jieguang Song
,
Yue Liu
,
Chunxiao Wu
,
Xueqing Yang
,
Huihui Luo
,
Chunyan He
,
Chengbin Li
and
Haizhen Yang
. 2020,
“Preparation and properties of coated silica/aluminum cermet materials via powder metallurgy method”,
vol.21,
no.2,
pp. 143 - 147.
Available from: doi:10.36410/jcpr.2020.21.2.143
Jieguang Song
외.
“Preparation and properties of coated silica/aluminum cermet materials via powder metallurgy method“
Journal of Ceramic Processing Research
21.2
pp. 143 - 147.
(2020): 143.
Jieguang Song
,
Yue Liu
,
Chunxiao Wu
,
Xueqing Yang
,
Huihui Luo
,
Chunyan He
,
Chengbin Li
,
Haizhen Yang
.
Preparation and properties of coated silica/aluminum cermet materials via powder metallurgy method
Journal of Ceramic Processing Research
[Internet].
2020;
21(2),
:
143 - 147.
Available from: doi:10.36410/jcpr.2020.21.2.143
Jieguang Song
,
Yue Liu
,
Chunxiao Wu
,
Xueqing Yang
,
Huihui Luo
,
Chunyan He
,
Chengbin Li
and
Haizhen Yang
. “Preparation and properties of coated silica/aluminum cermet materials via powder metallurgy method“
Journal of Ceramic Processing Research
21, no.2,
(2020): 143 - 147. doi: :10.36410/jcpr.2020.21.2.143