KOAJKorea
Open Access Journals

@article{ART002561078},
author={ Jieguang Song and Yue Liu and Chunxiao Wu and Xueqing Yang and Yipeng Gong and Jianzhen Huang and Chunyan He and Huihui Luo and Aixia Chen },
title={ Fabrication and properties of Al2O3-Al cermet materials using different raw material composition parameter },
journal={ Journal of Ceramic Processing Research },
issn={1229-9162},
year={2020},
number={1},
pages={21 - 25},
doi={10.36410/jcpr.2020.21.1.21},
url={http://dx.doi.org/10.36410/jcpr.2020.21.1.21}

TY - JOUR
AU - Jieguang Song AU - Yue Liu
AU - Chunxiao Wu
AU - Xueqing Yang
AU - Yipeng Gong
AU - Jianzhen Huang
AU - Chunyan He
AU - Huihui Luo
AU - Aixia Chen
TI - Fabrication and properties of Al2O3-Al cermet materials using different raw material composition parameter
T2 - Journal of Ceramic Processing Research
PY - 2020
VL - 21
IS - 1
PB - 한양대학교 청정에너지연구소
SP - 21 - 25
SN - 1229-9162
AB - Cermet application is extensive because it retains the characteristics of ceramic materials and has the advantages of metalmaterials. In this paper, alumina/aluminum cermet materials were prepared through powder metallurgy method. Theinfluence of raw material formula on the properties of alumina/aluminum cermet was investigated on the basis that ceramicmaterials have good wear resistance and high thermal conductivity. Results show that when the mass ratio of alumina toaluminum is 1:3, the prepared cermet samples have excellent properties, highest density, and uniform distribution ofaluminum and alumina. MgO addition exhibits better effect, higher degree of densification, and renders higher hardness andstrength for the sample as compared with SiO2 and Y2O3 addition. The sintered cermet with composite powder prepared viaprecipitation has better properties and higher densities and surface hardness than that prepared via the ball mill method. Therelative density was 97.1%, surface hardness was 875 HV, and electric resistance was 0.0169 Ω·m.
KW - Cermet materials, alumina, aluminum, raw material, electric resistivity
DO - 10.36410/jcpr.2020.21.1.21
UR - http://dx.doi.org/10.36410/jcpr.2020.21.1.21
ER -

Jieguang Song , Yue Liu , Chunxiao Wu , Xueqing Yang , Yipeng Gong , Jianzhen Huang , Chunyan He , Huihui Luo and Aixia Chen (2020). Fabrication and properties of Al2O3-Al cermet materials using different raw material composition parameter. Journal of Ceramic Processing Research, 21(1), 21 - 25.

Jieguang Song , Yue Liu , Chunxiao Wu , Xueqing Yang , Yipeng Gong , Jianzhen Huang , Chunyan He , Huihui Luo and Aixia Chen . 2020, “Fabrication and properties of Al2O3-Al cermet materials using different raw material composition parameter”, vol.21, no.1, pp. 21 - 25. Available from: doi:10.36410/jcpr.2020.21.1.21

Jieguang Song 외. “Fabrication and properties of Al2O3-Al cermet materials using different raw material composition parameter“ Journal of Ceramic Processing Research 21.1 pp. 21 - 25. (2020): 21.

Jieguang Song , Yue Liu , Chunxiao Wu , Xueqing Yang , Yipeng Gong , Jianzhen Huang , Chunyan He , Huihui Luo , Aixia Chen . Fabrication and properties of Al2O3-Al cermet materials using different raw material composition parameter Journal of Ceramic Processing Research [Internet]. 2020; 21(1), : 21 - 25. Available from: doi:10.36410/jcpr.2020.21.1.21

Jieguang Song , Yue Liu , Chunxiao Wu , Xueqing Yang , Yipeng Gong , Jianzhen Huang , Chunyan He , Huihui Luo and Aixia Chen . “Fabrication and properties of Al2O3-Al cermet materials using different raw material composition parameter“ Journal of Ceramic Processing Research 21, no.1, (2020): 21 - 25. doi: :10.36410/jcpr.2020.21.1.21