@article{ART001627577},
author={
Jie-Guang Song and
Fang Wang and
Xiao-Bo Bai and
Da-Ming Du and
Yin-Yan Ju and
Ming-Han Xu and
Gang-Chang Ji
},
title={Effect of the sintering technology on the properties of fired brick from quartz sands},
journal={Journal of Ceramic Processing Research},
issn={1229-9162},
year={2011},
volume={12},
number={4},
pages={357-360},
doi={10.36410/jcpr.2011.12.4.357},
url={http://dx.doi.org/10.36410/jcpr.2011.12.4.357}
TY - JOUR
AU - Jie-Guang Song
AU - Fang Wang
AU - Xiao-Bo Bai
AU - Da-Ming Du
AU - Yin-Yan Ju
AU - Ming-Han Xu
AU - Gang-Chang Ji
TI - Effect of the sintering technology on the properties of fired brick from quartz sands
T2 - Journal of Ceramic Processing Research
PY - 2011
VL - 12
IS - 4
PB - 한양대학교 청정에너지연구소
SP - 357-360
SN - 1229-9162
AB - River sands as low grade natural raw materials are used to prepare the fired brick to replace clay fired bricks, which aims to save land resources and use low grade natural resources to realize high cost performance. In this paper, the effect of sintering technology of bricks on their performance is discussed. The compressive strength of fired bricks is first increased and then decreased with an increase in the sintering temperature, the compressive strength of bricks prepared by the isostatic compaction shaping is higher than that of bricks prepared by the plastic shaping under the same conditions. The compressive strength of bricks reaches 28 MPa when sintered at 1150 oC by using a 20MPa isostatic compaction shaping method. The compressive strength of bricks is first increased and then decreased by prolonging the holding time, the compressive strength of bricks reaches 28.9MPa when sintered at 1150 oC for 2 h.
KW - Fired brick, Quartz sands, Sintering technology, Compressive strength, Water absorption, Microstructure, Density,Shaping methods.
DO - 10.36410/jcpr.2011.12.4.357
UR - http://dx.doi.org/10.36410/jcpr.2011.12.4.357
ER -
Jie-Guang Song
,
Fang Wang
,
Xiao-Bo Bai
,
Da-Ming Du
,
Yin-Yan Ju
,
Ming-Han Xu
and
Gang-Chang Ji
(2011). Effect of the sintering technology on the properties of fired brick from quartz sands. Journal of Ceramic Processing Research,
12( 4),
357- 360.
Jie-Guang Song
,
Fang Wang
,
Xiao-Bo Bai
,
Da-Ming Du
,
Yin-Yan Ju
,
Ming-Han Xu
and
Gang-Chang Ji
. 2011,
“Effect of the sintering technology on the properties of fired brick from quartz sands”,
Journal of Ceramic Processing Research,
vol. 12, no. 4,
pp. 357-360.
Available from: doi:10.36410/jcpr.2011.12.4.357
Jie-Guang Song
Fang Wang
et al.
Xiao-Bo Bai
Da-Ming Du
Yin-Yan Ju
Ming-Han Xu
Gang-Chang Ji
“Effect of the sintering technology on the properties of fired brick from quartz sands” Journal of Ceramic Processing Research
12.4
pp. 357-360 (2011): 357.
Jie-Guang Song
,
Fang Wang
,
Xiao-Bo Bai
,
Da-Ming Du
,
Yin-Yan Ju
,
Ming-Han Xu
,
Gang-Chang Ji
. Effect of the sintering technology on the properties of fired brick from quartz sands Journal of Ceramic Processing Research [Internet]. 2011;
12( 4),
: 357-360.
Available from: doi:10.36410/jcpr.2011.12.4.357
Jie-Guang Song
,
Fang Wang
,
Xiao-Bo Bai
,
Da-Ming Du
,
Yin-Yan Ju
,
Ming-Han Xu
and
Gang-Chang Ji
. “Effect of the sintering technology on the properties of fired brick from quartz sands” Journal of Ceramic Processing Research
12, no.4
(2011): 357-360. doi: 10.36410/jcpr.2011.12.4.357