Photophysical Properties of Anthracene Derivatives

In this tutorial review, we intend to provide the reader with a comprehensive introduction to the photophysical properties of organic compounds with a specific focus on anthracene and its derivatives. Anthracene‐based building blocks have attracted the attention of chemists due to their intrinsic luminescent properties. A deep understanding of their interaction with light, including the mechanisms of emission (luminescence, i.e., fluorescence or phosphorescence) and quenching, is crucial to design and generate compounds with precise properties for further applications. Thus, the photophysical properties of different types of aggregates, both in the ground state (J‐ and H‐type) and in the exited state (e.g., excimer, exciplex) will be discussed, finishing with a few examples of dyads and triads.


Light
Light is based on electromagnetic waves having defined wavelength and frequency. [1] The electromagnetic wave (just as the name states) is composed of electric and magnetic oscillation fields that are perpendicular to each other ( Figure 1).

Light
Light is based on electromagnetic waves having defined wavelength and frequency [1] The electromagnetic wave (just as the name states) is composed of electric and mag netic oscillation fields that are perpendicular to each other ( Figure 1). All types of light (e.g., gamma, UV, visible, IR) have the same nature, but what di ferentiates them is their wavelength and frequency. Some of them are higher energy an shorter wavelengths (e.g., gamma rays), while others are lower energy and possess longe wavelengths (e.g., infrared). The energy of light is inversely proportional to its wave length: if the wavelength increases, the energy decreases and vice versa (Equation (1)). All types of light (e.g., gamma, UV, visible, IR) have the same nature, but what differentiates them is their wavelength and frequency. Some of them are higher energy and shorter wavelengths (e.g., gamma rays), while others are lower energy and possess longer wavelengths (e.g., infrared). The energy of light is inversely proportional to its wavelength: if the wavelength increases, the energy decreases and vice versa (Equation (1)). Undisputedly, light is one of the most important phenomena for all living species on earth, mainly because it provides the energy needed for living species to function. Thus, green plants use sunlight to synthesize sugars via the process of photosynthesis (Figure 2), while the produced sugars in turn are used by living organisms.
Photochem 2023, 3, FOR PEER REVIEW Undisputedly, light is one of the most important phenomena for all living species o earth, mainly because it provides the energy needed for living species to function. Thu green plants use sunlight to synthesize sugars via the process of photosynthesis (Figur 2), while the produced sugars in turn are used by living organisms. Photosynthesis, apart from producing carbohydrates, further helps balance th amount of carbon dioxide and oxygen as it uses the carbon dioxide (respiratory byprodu of living organisms) to release oxygen. The reaction is possible thanks to the chlorophy found in green plants, capable of harvesting the light and converting it into chemical en ergy (carbohydrate) while transforming carbon dioxide in the presence of water to carbo hydrates (sugar) and oxygen [2].
Another important feature of light is that it helps living beings to see and differentiat between objects due to their different absorptions, a topic that is going to be explained i more detail below. The main source of light for many years was the Sun, giving a wid range of radiation (herein wavelength λ nm), which can also be used to perform photo chemical reactions as stated by Ciamician in 1912 [3]. While the human eye is able to dete only a small part of the entire spectral range, mainly from 380 to 780 nm, the rest of th radiation requires special techniques for its detection ( Figure 3).

Light Sources
We can differentiate two types of light sources: natural (created by nature, animal and artificial (created by humans). Some of them are listed below (Figure 4). Photosynthesis, apart from producing carbohydrates, further helps balance the amount of carbon dioxide and oxygen as it uses the carbon dioxide (respiratory byproduct of living organisms) to release oxygen. The reaction is possible thanks to the chlorophyll found in green plants, capable of harvesting the light and converting it into chemical energy (carbohydrate) while transforming carbon dioxide in the presence of water to carbohydrates (sugar) and oxygen [2].
Another important feature of light is that it helps living beings to see and differentiate between objects due to their different absorptions, a topic that is going to be explained in more detail below. The main source of light for many years was the Sun, giving a wide range of radiation (herein wavelength λ nm), which can also be used to perform photochemical reactions as stated by Ciamician in 1912 [3]. While the human eye is able to detect only a small part of the entire spectral range, mainly from 380 to 780 nm, the rest of the radiation requires special techniques for its detection ( Figure 3). Photochem 2023, 3, FOR PEER REVIEW 2 Undisputedly, light is one of the most important phenomena for all living species on earth, mainly because it provides the energy needed for living species to function. Thus, green plants use sunlight to synthesize sugars via the process of photosynthesis ( Figure  2), while the produced sugars in turn are used by living organisms. Photosynthesis, apart from producing carbohydrates, further helps balance the amount of carbon dioxide and oxygen as it uses the carbon dioxide (respiratory byproduct of living organisms) to release oxygen. The reaction is possible thanks to the chlorophyll found in green plants, capable of harvesting the light and converting it into chemical energy (carbohydrate) while transforming carbon dioxide in the presence of water to carbohydrates (sugar) and oxygen [2].
Another important feature of light is that it helps living beings to see and differentiate between objects due to their different absorptions, a topic that is going to be explained in more detail below. The main source of light for many years was the Sun, giving a wide range of radiation (herein wavelength λ nm), which can also be used to perform photochemical reactions as stated by Ciamician in 1912 [3]. While the human eye is able to detect only a small part of the entire spectral range, mainly from 380 to 780 nm, the rest of the radiation requires special techniques for its detection ( Figure 3).

Light Sources
We can differentiate two types of light sources: natural (created by nature, animals) and artificial (created by humans). Some of them are listed below (Figure 4).  We can differentiate two types of light sources: natural (created by nature, animals) and artificial (created by humans). Some of them are listed below ( Figure 4).

Interaction of Light with Matter 1.2.1. Absorption
Absorbance, also known as optical density, refers to the light absorbed by matter, whether it is gas, liquid, or sold. The absorbance corresponds to the logarithm of the ratio between the intensity of light before entering the matter (solid, gas, liquid) (I 0 ) and the intensity of light after passing through that medium (I s ) (Equation (2)).

Absorption
Absorbance, also known as optical density, refers to the light absorbed by matter, whether it is gas, liquid, or sold. The absorbance corresponds to the logarithm of the ratio between the intensity of light before entering the matter (solid, gas, liquid) ( 0 ) and the intensity of light after passing through that medium ( ) (Equation (2)). = 0 (2) However, there are other physical processes that can contribute to minimizing the light intensity while light is passing through a specific medium, such as reflection or scattering. Thus, the measurement of the outgoing light intensity does not only show the absorbance, but it measures the attenuation caused by all these processes together. Different chromophores have different capabilities of absorbing light. The capability of absorbing light by a chromophore material is known as its extinction coefficient (ԑ), and it can easily be determined through the Lambert-Beer law by measuring the absorbance ( ) of a solution of the compound with a known concentration ( ) in a cell with a known width (l) (Equation (3)).

Matter
Matter is any material (gas, liquid, solid) that takes up space (volume) and has mass. However, there are other physical processes that can contribute to minimizing the light intensity while light is passing through a specific medium, such as reflection or scattering. Thus, the measurement of the outgoing light intensity does not only show the absorbance, but it measures the attenuation caused by all these processes together. Different chromophores have different capabilities of absorbing light. The capability of absorbing light by a chromophore material is known as its extinction coefficient (ε), and it can easily be determined through the Lambert-Beer law by measuring the absorbance (A) of a solution of the compound with a known concentration (c) in a cell with a known width (l) (Equation (3)).

Matter
Matter is any material (gas, liquid, solid) that takes up space (volume) and has mass. It is composed of atoms as the smallest constituent. While matter is composed of atoms, the latter is composed of protons, neutrons, and electrons. Protons are positively charged, influencing the electronic configuration of the atoms, and define the atomic number. Neutrons, on the other hand, do not affect the electronic configuration because they are chargeless. However, atoms that differ in neutron number are called isotopes, e.g., carbon has three naturally occurring isotopes, 12 C, 13 C, and 14 C. In the first case, the carbon atom has six protons and six neutrons given a total mass number of 12 ( 12 6 C); in the second case, it has six protons and seven neutrons given a mass number of 13 ( 13 6 C) whereas in the latter case, it has eight neutrons and six protons given a mass number of 14 ( 14 6 C). Contrary to positively charged protons, electrons are negatively charged, being responsible for numerous physical phenomena, such as: magnetism (since it has a spin), electricity (because it is a charge species), and chemistry (responsible for bond formation, thus influencing physical and chemical properties). The space around the nucleus where an electron is found with high probability is often called the orbital ( Figure 5).

Photochem 2023, 3, FOR PEER REVIEW
it is a charge species), and chemistry (responsible for bond formation, thus influencing physical and chemical properties). The space around the nucleus where an electron i found with high probability is often called the orbital ( Figure 5). When two atoms come close in proximity under proper condition (right orbital ge ometry, temperature, pressure, etc.), their orbitals will overlap (by sharing their electrons with each other to form a new molecule. The newly formed molecules, on the other hand have two new molecular orbitals: the highest occupied molecular orbital (HOMO) bond ing, fully occupied, and the lowest unoccupied molecular orbital (LUMO) antibonding and empty orbitals. Such an example is the formation of a π-π bonding by the overlap o two π orbitals of two carbon atoms ( Figure 6). Figure 6. π orbitals in a typical π bonding (bonding and antibonding *).

Electronic Transitions
Electronic transitions happen when matter absorbs or emits light. We already learned that the atom is the smallest constituent of matter and that it possesses at least one electron in its atomic orbitals. Thus, in principle, everything can interact with light. Excitation o such compounds with a proper wavelength will cause an electron transition from th ground state (bonding orbital) to the excited state (antibonding orbital). Depending on th type of light and the chemical composition, all possible electronic transitions that typically can occur when a compound absorbs light are depicted in (Figure 7). When two atoms come close in proximity under proper condition (right orbital geometry, temperature, pressure, etc.), their orbitals will overlap (by sharing their electrons) with each other to form a new molecule. The newly formed molecules, on the other hand, have two new molecular orbitals: the highest occupied molecular orbital (HOMO) bonding, fully occupied, and the lowest unoccupied molecular orbital (LUMO) antibonding and empty orbitals. Such an example is the formation of a π-π bonding by the overlap of two π orbitals of two carbon atoms ( Figure 6). Photochem 2023, 3, FOR PEER REVIEW it is a charge species), and chemistry (responsible for bond formation, thus influencing physical and chemical properties). The space around the nucleus where an electron is found with high probability is often called the orbital ( Figure 5). When two atoms come close in proximity under proper condition (right orbital ge ometry, temperature, pressure, etc.), their orbitals will overlap (by sharing their electrons with each other to form a new molecule. The newly formed molecules, on the other hand have two new molecular orbitals: the highest occupied molecular orbital (HOMO) bond ing, fully occupied, and the lowest unoccupied molecular orbital (LUMO) antibonding and empty orbitals. Such an example is the formation of a π-π bonding by the overlap o two π orbitals of two carbon atoms ( Figure 6). Figure 6. π orbitals in a typical π bonding (bonding and antibonding *).

Electronic Transitions
Electronic transitions happen when matter absorbs or emits light. We already learned that the atom is the smallest constituent of matter and that it possesses at least one electron in its atomic orbitals. Thus, in principle, everything can interact with light. Excitation o such compounds with a proper wavelength will cause an electron transition from the ground state (bonding orbital) to the excited state (antibonding orbital). Depending on the type of light and the chemical composition, all possible electronic transitions that typically can occur when a compound absorbs light are depicted in (Figure 7).

Electronic Transitions
Electronic transitions happen when matter absorbs or emits light. We already learned that the atom is the smallest constituent of matter and that it possesses at least one electron in its atomic orbitals. Thus, in principle, everything can interact with light. Excitation of such compounds with a proper wavelength will cause an electron transition from the ground state (bonding orbital) to the excited state (antibonding orbital). Depending on the type of light and the chemical composition, all possible electronic transitions that typically can occur when a compound absorbs light are depicted in (Figure 7). Singlet and triplet excited states are commonly used terms to describe these (pro cesses) transitions as they are more informative. In the singlet excited state (antibonding orbital), the electron is still antiparallel after excitation, whereas in the tripled excited state the electron is parallel due to the spin flip ( Figure 8). Electron transition from HOMO to LUMO can be promoted by providing energy tha matches the exact energy difference between the ground state and the final state ( Figure  8). Typical electronic transitions are these involving n, π, σ, d-d, and ligand-to-metal o metal-to-ligand charge transfer transition (LMCT, MLCT). However, traditional benchtop UV-VIS spectrometers with wavelengths of 200-800 nm can only observe n-π*, π-π*, d-d and charge transfer electronic transitions. This is because the wavelength that is provided by these analytical techniques is not sufficient to promote σ-σ* electronic transitions which require a lot more energy to lift an electron from the ground state to the exited state ( Figure 7). The n-π* transition occurs in the compounds containing hetero atoms, e.g. amines or carbonyl compounds, which contain nonbonding electrons. Because the energy gap between these two different energy states is promoted compared with the other ones e.g., sigma (σ), the energy required to trigger this transition is rather low. Therefore, in a typical UV absorption spectrum, the absorption band appears at higher wavelength. The π-π* transition, on the other hand, is found in compounds containing double (carbony groups, double bonds) or triple bonds, and because the energy gap between these two states is larger than for n-π*, the UV absorption band appears at lower wavelength. Such transitions are observed in the case of benzophenone, which contains both types of elec trons, thanks to the carbonyl functional group (Figure 9). Singlet and triplet excited states are commonly used terms to describe these (processes) transitions as they are more informative. In the singlet excited state (antibonding orbital), the electron is still antiparallel after excitation, whereas in the tripled excited state, the electron is parallel due to the spin flip ( Figure 8).  Singlet and triplet excited states are commonly used terms to describe these (pro cesses) transitions as they are more informative. In the singlet excited state (antibonding orbital), the electron is still antiparallel after excitation, whereas in the tripled excited state the electron is parallel due to the spin flip ( Figure 8). Electron transition from HOMO to LUMO can be promoted by providing energy tha matches the exact energy difference between the ground state and the final state ( Figure  8). Typical electronic transitions are these involving n, π, σ, d-d, and ligand-to-metal o metal-to-ligand charge transfer transition (LMCT, MLCT). However, traditional benchtop UV-VIS spectrometers with wavelengths of 200-800 nm can only observe n-π*, π-π*, d-d and charge transfer electronic transitions. This is because the wavelength that is provided by these analytical techniques is not sufficient to promote σ-σ* electronic transitions which require a lot more energy to lift an electron from the ground state to the exited state ( Figure 7). The n-π* transition occurs in the compounds containing hetero atoms, e.g. amines or carbonyl compounds, which contain nonbonding electrons. Because the energy gap between these two different energy states is promoted compared with the other ones e.g., sigma (σ), the energy required to trigger this transition is rather low. Therefore, in a typical UV absorption spectrum, the absorption band appears at higher wavelength. The π-π* transition, on the other hand, is found in compounds containing double (carbony groups, double bonds) or triple bonds, and because the energy gap between these two states is larger than for n-π*, the UV absorption band appears at lower wavelength. Such transitions are observed in the case of benzophenone, which contains both types of elec trons, thanks to the carbonyl functional group (Figure 9). Electron transition from HOMO to LUMO can be promoted by providing energy that matches the exact energy difference between the ground state and the final state ( Figure 8). Typical electronic transitions are these involving n, π, σ, d-d, and ligand-tometal or metal-to-ligand charge transfer transition (LMCT, MLCT). However, traditional benchtop UV-VIS spectrometers with wavelengths of 200-800 nm can only observe n-π*, π-π*, d-d, and charge transfer electronic transitions. This is because the wavelength that is provided by these analytical techniques is not sufficient to promote σ-σ* electronic transitions, which require a lot more energy to lift an electron from the ground state to the exited state ( Figure 7). The n-π* transition occurs in the compounds containing hetero atoms, e.g., amines or carbonyl compounds, which contain nonbonding electrons. Because the energy gap between these two different energy states is promoted compared with the other ones, e.g., sigma (σ), the energy required to trigger this transition is rather low. Therefore, in a typical UV absorption spectrum, the absorption band appears at higher wavelength. The π-π* transition, on the other hand, is found in compounds containing double (carbonyl groups, double bonds) or triple bonds, and because the energy gap between these two states is larger than for n-π*, the UV absorption band appears at lower wavelength. Such transitions are observed in the case of benzophenone, which contains both types of electrons, thanks to the carbonyl functional group (Figure 9). However, this is not true for all compounds because conjugation capabilities between different compounds containing double bonds lead to different absorption bands. Such an example is depicted in Figure 10. As the conjugation increases from naphthalene to anthracene and tetracene, the absorbance spectrum shifts to higher wavelength, with tetracene absorbing at around λ = 400-500 nm. This is caused mainly because in tetracene, there are four phenyl rings fully conjugated. Thus, tetracene is a colored compound with a characteristic number of absorption bands (four). However, this is not true for all compounds because conjugation capabilities betwee different compounds containing double bonds lead to different absorption bands. Suc an example is depicted in Figure 10. As the conjugation increases from naphthalene t anthracene and tetracene, the absorbance spectrum shifts to higher wavelength, with te tracene absorbing at around λ = 400-500 nm. This is caused mainly because in tetracene there are four phenyl rings fully conjugated. Thus, tetracene is a colored compound wit a characteristic number of absorption bands (four). In contrast to the first two examples, the energy gap between σ-σ* is large as it in volves compounds having only sp 3 C-H; thus this excitation requires wavelengths in th far UV region, and this type of transition usually is not observed in UV-VIS [7], as show for cyclohexane ( Figure 11).  However, this is not true for all compounds because conjugation capabilities between different compounds containing double bonds lead to different absorption bands. Such an example is depicted in Figure 10. As the conjugation increases from naphthalene to anthracene and tetracene, the absorbance spectrum shifts to higher wavelength, with te tracene absorbing at around λ = 400-500 nm. This is caused mainly because in tetracene there are four phenyl rings fully conjugated. Thus, tetracene is a colored compound with a characteristic number of absorption bands (four). In contrast to the first two examples, the energy gap between σ-σ* is large as it in volves compounds having only sp 3 C-H; thus this excitation requires wavelengths in th far UV region, and this type of transition usually is not observed in UV-VIS [7], as shown for cyclohexane ( Figure 11). In contrast to the first two examples, the energy gap between σ-σ* is large as it involves compounds having only sp 3 C-H; thus this excitation requires wavelengths in the far UV region, and this type of transition usually is not observed in UV-VIS [7], as shown for cyclohexane ( Figure 11). Photochem 2023, 3, FOR PEER REVIEW 7 Figure 11. UV-VIS spectrum of cyclohexan. "Reprinted with permission from Ref. [8]. Copyright 2019, Elsevier" Charge transfer (CT) and d-d transitions are usually found in inorganic compounds since they typically contain metal ions, which, in combination with ligands, sometimes allow such transition to occur [9]. The d-d transition usually is observed from transition metal ions' complexes when one electron from a lower d orbital energy state is promoted Figure 11. UV-VIS spectrum of cyclohexan. Reprinted with permission from Ref. [8]. Copyright 2019, Elsevier.
Charge transfer (CT) and d-d transitions are usually found in inorganic compounds since they typically contain metal ions, which, in combination with ligands, sometimes allow such transition to occur [9]. The d-d transition usually is observed from transition metal ions' complexes when one electron from a lower d orbital energy state is promoted and jumps to another d orbital of higher energy state; however, this transition is forbidden by the Laporte rule [10]. This rule is mainly applied for those compounds that possess centrosymmetric point symmetry. It states that all transitions that conserve parity during the electronic transition either going from p-p or d-d are forbidden, but s-p and p-d are allowed. However, if the centrosymmetry is disturbed, the Laporte rule can be overcome, and the transition can take place ( Figure 12).
While in the d-d transition, an electron transfer from a lower energy d orbital occurs to another d-orbital of higher energy, in the case of charge transfer in either MLCT or LMCT, the electron transition occurs from the metal to the ligand and vice versa, where one of them is capable of donating electrons and the other one is capable of accepting that electron. Such examples are usually met in the case of metal-ligand complexes.
All transition necessitates the absorption of a photon in a first step, and the resulting excited compound (very reactive species) can afterward experience a photochemical reaction, leading to a new product, or can go back to the ground state via fluorescence or phosphorescence emission. However, there are some restrictions during these processes because some of these transitions are allowed while others are not, according to the selection rules: any transition that implies that the reaction entropy is not zero (∆S ̸ = 0) is strongly forbidden. A typical example is the absorption of a photon from a chromophore, which indeed leads almost always to the formation of the singlet excited state (allowed transition) and not the triplet excited state (forbidden transition). This is because, in the first case, the transition occurs between states of the same multiplicity (S 0 + νh→S 1 ), whereas in the latter, it occurs with a different multiplicity (S 0 + νh→T 1 ), which otherwise would involve change in the spin state ( Figure 13). Charge transfer (CT) and d-d transitions are usually found in inorgani since they typically contain metal ions, which, in combination with ligand allow such transition to occur [9]. The d-d transition usually is observed fr metal ions' complexes when one electron from a lower d orbital energy state and jumps to another d orbital of higher energy state; however, this transition by the Laporte rule [10]. This rule is mainly applied for those compounds centrosymmetric point symmetry. It states that all transitions that conserve the electronic transition either going from p-p or d-d are forbidden, but s-p allowed. However, if the centrosymmetry is disturbed, the Laporte rule can and the transition can take place ( Figure 12). While in the d-d transition, an electron transfer from a lower energy d o to another d-orbital of higher energy, in the case of charge transfer in eit LMCT, the electron transition occurs from the metal to the ligand and vice one of them is capable of donating electrons and the other one is capable of a electron. Such examples are usually met in the case of metal-ligand complex All transition necessitates the absorption of a photon in a first step, and excited compound (very reactive species) can afterward experience a photoc tion, leading to a new product, or can go back to the ground state via flu phosphorescence emission. However, there are some restrictions during th because some of these transitions are allowed while others are not, accordin tion rules: any transition that implies that the reaction entropy is not zer strongly forbidden. A typical example is the absorption of a photon from a c which indeed leads almost always to the formation of the singlet excited s whereas in the latter, it occurs with a different multiplicity (S0 + νh→T1), wh would involve change in the spin state ( Figure 13).

Emission Jablonski Diagram
All photochemical processes including photochemical reactions, fluorescence, phosphorescence, and other processes related can be represented in a Jablonski diagram as shown in Figure 14. For any of these phenomena to occur, a photon having the exact energy needed to transfer an electron from the ground state to the excited state must be absorbed.

Jablonski Diagram
All photochemical processes including photochemical reactions, fluorescence, phos phorescence, and other processes related can be represented in a Jablonski diagram a shown in Figure 14. For any of these phenomena to occur, a photon having the exact en ergy needed to transfer an electron from the ground state to the excited state must b absorbed. E is the energy difference between the two states, ʋ is the frequency of the photo absorbed, h is Planck's constant (6.62 × 10 −34 J s), and λ is the wavelength (Equation (4)).
The absorption of the photon can provoke a change in the electronic distribution o matter, thus changing the reactivity and therefore leading to either a photochemical reac tion, fluorescence, or phosphorescence emission. According to Kasha's rule, fluorescenc always occurs from the lowest singlet excited state (S1). However, excitation usually take place to higher energy levels than S1 (e.g., S2, S3…Sn). In addition, each excited state usuall is associated with the access of vibrational energy (v) (e.g., v = 0, 1, 2…n), which relaxe quickly (time scale 10 −13 to 10 −9 s in the condensed phase) to v = 0 as heat. It can also un dergo fast internal conversion (IC) S2-S1, within 10 −9 to 10 −7 s. From this point, it can g ∆E is the energy difference between the two states, is the frequency of the photon absorbed, h is Planck's constant (6.62 × 10 −34 J s), and λ is the wavelength (Equation (4)).
The absorption of the photon can provoke a change in the electronic distribution of matter, thus changing the reactivity and therefore leading to either a photochemical reaction, fluorescence, or phosphorescence emission. According to Kasha's rule, fluorescence always occurs from the lowest singlet excited state (S 1 ). However, excitation usually takes place to higher energy levels than S 1 (e.g., S 2 , S 3 . . . S n ). In addition, each excited state usually is associated with the access of vibrational energy (v) (e.g., v = 0, 1, 2 . . . n), which relaxes quickly (time scale 10 −13 to 10 −9 s in the condensed phase) to v = 0 as heat. It can also undergo fast internal conversion (IC) S 2 -S 1 , within 10 −9 to 10 −7 s. From this point, it can go back to the ground state in four possible ways: (a) via a chemical reaction giving new products, (b) by emission of the absorbed photon (fluorescence), (c) by intersystem crossing (ISC) through the change of spin to reach the triplet excited state (T 1 ), and (d) by internal conversion (IC) by heat emission, which further can lead to photochemical reaction or phosphorescence ( Figure 14) [11]. Fluorescence and phosphorescence phenomena will be explained below in more detail.

Fluorescence
The fluorescence process, as depicted in the Jablonski diagram ( Figure 15), consists in the absorption of a photon with minimum energy by a chromophore [12] to bring an electron to an excited state. The emission of light (photon) then occurs from the lowest singlet excited state. The emitting light has thus a longer wavelength and therefore lower energy than the absorbed wavelength because some of its energy is lost during the processes of vibrational relaxation and internal conversion, which in turn are much faster than the fluorescent emission ( Figure 15).

Fluorescence
The fluorescence process, as depicted in the Jablonski diagram ( Figure 15), consists in the absorption of a photon with minimum energy by a chromophore [12] to bring an electron to an excited state. The emission of light (photon) then occurs from the lowes singlet excited state. The emitting light has thus a longer wavelength and therefore lower energy than the absorbed wavelength because some of its energy is lost during the pro cesses of vibrational relaxation and internal conversion, which in turn are much faste than the fluorescent emission ( Figure 15). One of the most appealing examples of fluorescence is when the absorption process occurs in the UV, invisible region for the human eye, and emits in the visible region. Since its discovery, fluorescence, due to its intrinsic properties and easy detection, has been used to detect optical properties and found widespread applications in light-emitting diodes (LEDs) [13][14][15], chemical sensors [16][17][18] for toxic compounds [19][20][21][22], nitro derivatives herbicides [23][24][25][26][27][28][29], and medicine [30][31][32][33][34].

Quenching Mechanism
Quenching of fluorescence is the decrease of the fluorescence intensity as a function of the fluorophore's (donor) interaction from either the ground or the excited state, with its surroundings, e.g., the solvent or a specific quencher molecule (good quenching properties are complex formation through hydrogen bonds (donor/acceptor), π-π inter actions, high reduction potentials). For instance, the heavy atom effect [35,36] (spin-orbi coupling, where the electron spin is affected due to the orbital motion of electrons and the electrostatic field of the positively charged nucleus; therefore, the heavier the atom is, the more electrons there are and thus the more the electron spin is affected) is a well-known process for fluorescence quenching [37] due to the facilitation of intersystem crossing. The Jablonski diagram ( Figure 14) explains all possible phenomena that can occur after the process of light absorption from a chromophore to generate the excited state from which the emission can occur, from either the singlet excited state or the triplet state. Thus, the emission of fluorescence in principle can be quenched either from the ground state by forming a complex with another molecule, which would modify its photophysical prop erties, or from the excited state by performing a photochemical reaction, or via energy transfer, e.g., via (FRET) Förster resonance energy transfer and (DET) Dexter energy trans fer, and via collision. However, all these possible quenching processes can be grouped into dynamic and static quenching. One of the most appealing examples of fluorescence is when the absorption process occurs in the UV, invisible region for the human eye, and emits in the visible region. Since its discovery, fluorescence, due to its intrinsic properties and easy detection, has been used to detect optical properties and found widespread applications in light-emitting diodes (LEDs) [13][14][15], chemical sensors [16][17][18] for toxic compounds [19][20][21][22], nitro derivatives, herbicides [23][24][25][26][27][28][29], and medicine [30][31][32][33][34].

Quenching Mechanism
Quenching of fluorescence is the decrease of the fluorescence intensity as a function of the fluorophore's (donor) interaction from either the ground or the excited state, with its surroundings, e.g., the solvent or a specific quencher molecule (good quenching properties are complex formation through hydrogen bonds (donor/acceptor), π-π interactions, high reduction potentials). For instance, the heavy atom effect [35,36] (spin-orbit coupling, where the electron spin is affected due to the orbital motion of electrons and the electrostatic field of the positively charged nucleus; therefore, the heavier the atom is, the more electrons there are and thus the more the electron spin is affected) is a well-known process for fluorescence quenching [37] due to the facilitation of intersystem crossing. The Jablonski diagram ( Figure 14) explains all possible phenomena that can occur after the process of light absorption from a chromophore to generate the excited state from which the emission can occur, from either the singlet excited state or the triplet state. Thus, the emission of fluorescence in principle can be quenched either from the ground state by forming a complex with another molecule, which would modify its photophysical properties, or from the excited state by performing a photochemical reaction, or via energy transfer, e.g., via (FRET) Förster resonance energy transfer and (DET) Dexter energy transfer, and via collision. However, all these possible quenching processes can be grouped into dynamic and static quenching.
Dynamic quenching occurs when an excited molecule (donor) collides or is in proximity to an acceptor molecule, and hence, electron transfer becomes possible. It was Förster [38] in 1951 who proposed the electron transfer mechanism as one of the possible ways of quenching (Scheme 1, left). According to him, due to charge oscillations, the donor and acceptor can be affected if they are in close proximity (~10 nm) in order to transfer one electron from the single excited state of the donor to an excited state, which has to be lower in energy, of the acceptor (Scheme 1). However, for this process to occur, there should be an overlap between the emission of the donor and the absorption of the acceptor molecule.
Förster [38] in 1951 who proposed the electron transfer mechanism as one of the possible ways of quenching (Scheme 1, left). According to him, due to charge oscillations, the donor and acceptor can be affected if they are in close proximity (~10 nm) in order to transfer one electron from the single excited state of the donor to an excited state, which has to be lower in energy, of the acceptor (Scheme 1). However, for this process to occur, there should be an overlap between the emission of the donor and the absorption of the acceptor molecule. Scheme 1. Quenching mechanism of fluorescence using a Jablonski diagram. Forster (left) [39], Dexter (middle), and the right overlap between the emission and absorption (right) "Adapted with permission from Ref [40], Copyright 2011, Elsevier". Two years later in 1953, Dexter [41] proposed another mechanism for luminescence quenching. The quenching process can occur when the donor and the acceptor are at a ca. 10 Å distance from each other, sufficient for an overlap of their orbitals. This will automatically lead to an electron transfer from the excited state of the donor to the LUMO of the acceptor, and at the same time, an electron moves from the HOMO of the acceptor to the HOMO of the donor (Scheme 1, center). Participation of excimers (see page 21) in the quenching mechanism was discussed by Weller (1969) [42], and Watkins (1974) a few years later [43].
In contrast to dynamic quenching, static quenching occurs when the fluorophore and the quencher form a complex [44] via π-π interaction, hydrogen bonding, or a chemical reaction in the ground state, therefore changing the photophysical properties of the fluorescent fluorophore to nonfluorescent. Such a process is also observed in the formation of dimers, such as in the case of pure anthracene (see photodimerization in Section 1.3.1).
Both static and dynamic quenching processes depend on the temperature, but follow different laws, allowing us to distinguish between them. Thus, dynamic quenching increases as the temperature increases. This is obvious since the process is based on the collisions between molecules, and the higher the temperature, the more intermolecular interactions. In static quenching, the quenching decreases as the temperature increases since the quencher and fluorophore are poorly bound to each other, and this interaction is weakened as the solution is heated. In addition, during the static quenching, the fluorescence lifetime remains the same (compared with unquenched system) because the quenching process occurs in the ground state, not in the excited state.

Stern-Volmer Relationship
Intermolecular quenching of luminescence (fluorescence/phosphorescence in the presence of another molecule, here called quencher, Q) is a well-known process. In addition, it is known that the quenching process, depending on the type of fluorophore and the quencher, can be static or dynamic. Therefore, whether it is one or the other taking Scheme 1. Quenching mechanism of fluorescence using a Jablonski diagram. Forster (left) [39], Dexter (middle), and the right overlap between the emission and absorption (right). Adapted with permission from Ref [40], Copyright 2011, Elsevier.
Two years later in 1953, Dexter [41] proposed another mechanism for luminescence quenching. The quenching process can occur when the donor and the acceptor are at a ca. 10 Å distance from each other, sufficient for an overlap of their orbitals. This will automatically lead to an electron transfer from the excited state of the donor to the LUMO of the acceptor, and at the same time, an electron moves from the HOMO of the acceptor to the HOMO of the donor (Scheme 1, center). Participation of excimers (see page 21) in the quenching mechanism was discussed by Weller (1969) [42], and Watkins (1974) a few years later [43].
In contrast to dynamic quenching, static quenching occurs when the fluorophore and the quencher form a complex [44] via π-π interaction, hydrogen bonding, or a chemical reaction in the ground state, therefore changing the photophysical properties of the fluorescent fluorophore to nonfluorescent. Such a process is also observed in the formation of dimers, such as in the case of pure anthracene (see photodimerization in Section 1.3.1).
Both static and dynamic quenching processes depend on the temperature, but follow different laws, allowing us to distinguish between them. Thus, dynamic quenching increases as the temperature increases. This is obvious since the process is based on the collisions between molecules, and the higher the temperature, the more intermolecular interactions. In static quenching, the quenching decreases as the temperature increases since the quencher and fluorophore are poorly bound to each other, and this interaction is weakened as the solution is heated. In addition, during the static quenching, the fluorescence lifetime remains the same (compared with unquenched system) because the quenching process occurs in the ground state, not in the excited state.

Stern-Volmer Relationship
Intermolecular quenching of luminescence (fluorescence/phosphorescence in the presence of another molecule, here called quencher, Q) is a well-known process. In addition, it is known that the quenching process, depending on the type of fluorophore and the quencher, can be static or dynamic. Therefore, whether it is one or the other taking place in a particular system, it can be easily found out by using the Stern-Volmer relationship [45] (Equation (5)).
F 0 is the fluorescence intensity in the absence of the quencher, F is the fluorescent intensity in the presence of the quencher, Q is the quencher concentration, τ is the lifetime of fluorescence in the presence of the quencher, τ 0 is the lifetime in the absence of the quencher, K q is the quenching rate coefficient, and K s is the association constant.
The Stern-Volmer relationship allows for investigating intermolecular deactivation by exploring the kinetic of deactivation. Since the static and dynamic quenching act with different mechanisms and thus different kinetic, the Stern-Volmer relationship allows for studying and differentiating between the two. This process can be represented as simplified in (Equation (6)), with M being the ground state fluorophore, M* the excited fluorophore, Q the quencher, and Q* the excited quencher. Intermolecular quenching in the dynamic mode diminishes both the emission intensity and the lifetime of the fluorescent species. Therefore, the terms F 0 F and τ 0 τ against the concentration of the quencher follow the same trend ( Figure 16a). However, with static quenching, because of the quencher and the fluorophore complex in the ground state, the number of potential fluorescent species decreases, thus only decreasing the emission intensity without changing the lifetime of the emission; hence the term τ 0 τ is independent of the concentration of the quencher.
The Stern-Volmer relationship allows for investigating intermolecular deac by exploring the kinetic of deactivation. Since the static and dynamic quenching different mechanisms and thus different kinetic, the Stern-Volmer relationship al studying and differentiating between the two. This process can be represented as fied in (Equation (6)), with M being the ground state fluorophore, M* the excited fluorophore, Q the qu and Q* the excited quencher. Intermolecular quenching in the dynamic mode dim both the emission intensity and the lifetime of the fluorescent species. Therefore, th 0 and 0 against the concentration of the quencher follow the same trend (Figu However, with static quenching, because of the quencher and the fluorophore com the ground state, the number of potential fluorescent species decreases, thus only ing the emission intensity without changing the lifetime of the emission; hence t 0 is independent of the concentration of the quencher.

Phosphorescence
Phosphorescence is another type of photoluminescence process, consisting in sorption of light by a chromophore like for fluorescence, but it differs from the latt emission process: in fluorescence, emission occurs from the lowest singlet excit whereas in phosphorescence, emission occurs from the lowest triplet excited state 17). * + → + or * + → + * Figure 16. Stern-Volmer graph for dynamic (a) and static (b) quenching.

Phosphorescence
Phosphorescence is another type of photoluminescence process, consisting in the absorption of light by a chromophore like for fluorescence, but it differs from the latter in its emission process: in fluorescence, emission occurs from the lowest singlet excited state, whereas in phosphorescence, emission occurs from the lowest triplet excited state ( Figure 17).
Due to the spin forbidden nature of the emission process, the emission itself is much slower during phosphorescence and can proceed within minutes or up to a few hours [46,47]. An example of long-lasting phosphorescence emission (up to few hours) based on strontium aluminate materials (SrAl 2 O 4 :Eu:Dy) was reported by the group of Zitoun, Bernaud, et al. [48] in 2009.

(5
F0 is the fluorescence intensity in the absence of the quencher, F is the fluorescen intensity in the presence of the quencher, Q is the quencher concentration, τ is the lifetim of fluorescence in the presence of the quencher, τ0 is the lifetime in the absence of th quencher, Kq is the quenching rate coefficient, and Ks is the association constant.
The Stern-Volmer relationship allows for investigating intermolecular deactivatio by exploring the kinetic of deactivation. Since the static and dynamic quenching act wit different mechanisms and thus different kinetic, the Stern-Volmer relationship allows fo studying and differentiating between the two. This process can be represented as simpl fied in (Equation (6)), with M being the ground state fluorophore, M* the excited fluorophore, Q the quenche and Q* the excited quencher. Intermolecular quenching in the dynamic mode diminishe both the emission intensity and the lifetime of the fluorescent species. Therefore, the term 0 and 0 against the concentration of the quencher follow the same trend ( Figure 16a However, with static quenching, because of the quencher and the fluorophore complex i the ground state, the number of potential fluorescent species decreases, thus only decreas ing the emission intensity without changing the lifetime of the emission; hence the term 0 is independent of the concentration of the quencher.

Phosphorescence
Phosphorescence is another type of photoluminescence process, consisting in the ab sorption of light by a chromophore like for fluorescence, but it differs from the latter in it emission process: in fluorescence, emission occurs from the lowest singlet excited state whereas in phosphorescence, emission occurs from the lowest triplet excited state (Figur 17). * + → + or * + → + * (6 Figure 17. Simplified Jablonski diagram for phosphorescence.

Anthracene and Its Derivatives
Anthracene is one of the simplest polycyclic aromatic hydrocarbon compounds derived from coal tar (1.5% anthracenes) as the main source. Anthracene belongs to the family of polycyclic aromatic hydrocarbons (PAHs), a class of organic compounds containing multiple aromatic rings [49]. It is composed of three fused benzene rings and is an example of an organic compound acting as a metal-free triplet photosensitizer. A photosensitizer, on the other hand, is a chemical entity capable of harvesting light (energy) and transferring it to its surroundings (molecules), which otherwise could not absorb at this wavelength. This class of organic compounds is particularly attractive for dye-sensitized solar cells [50,51], semiconductors, OLED [52], or lasers [53]. The heavy-metal-free triplet photosensitizer properties of anthracene lie in the fact that the energy levels of the singlet excited state (S 1 ) and of the triplet excited state (T 2 ) are in close proximity (Scheme 2, left), allowing for efficient (up to 70%) intersystem crossing (ISC) [54,55]. However, substitution of anthracene 1 in positions 9 and 10 with phenyl groups as in 2 (diphenylanthracene) [56] prevents π-π stacking and inhibits intersystem crossing simply due to noncoplanar phenyl groups to the anthracene moiety, which ultimately leads to a difference in the singlet and tripled excited states, resulting in a preferred fluorescence rather than phosphorescence emission (Scheme 2, right) [57]. In addition to the favorable energy (small) difference between (S 1 ) and (T 1 ) on anthracene moiety, the close proximity effect during the π-π stacking is another factor that favors ISC, suppressing one of the two preventing it. [46,47]. An example of long-lasting phosphorescence emission (up to few hours) based on strontium aluminate materials (SrAl2O4:Eu:Dy) was reported by the group of Zitoun, Bernaud, et al. [48] in 2009.

Anthracene and Its Derivatives
Anthracene is one of the simplest polycyclic aromatic hydrocarbon compounds derived from coal tar (1.5% anthracenes) as the main source. Anthracene belongs to the family of polycyclic aromatic hydrocarbons (PAHs), a class of organic compounds containing multiple aromatic rings [49]. It is composed of three fused benzene rings and is an example of an organic compound acting as a metal-free triplet photosensitizer. A photosensitizer, on the other hand, is a chemical entity capable of harvesting light (energy) and transferring it to its surroundings (molecules), which otherwise could not absorb at this wavelength. This class of organic compounds is particularly attractive for dye-sensitized solar cells [50,51], semiconductors, OLED [52], or lasers [53]. The heavy-metal-free triplet photosensitizer properties of anthracene lie in the fact that the energy levels of the singlet excited state (S1) and of the triplet excited state (T2) are in close proximity (Scheme 2, left), allowing for efficient (up to 70%) intersystem crossing (ISC) [54,55]. However, substitution of anthracene 1 in positions 9 and 10 with phenyl groups as in 2 (diphenylanthracene) [56] prevents π-π stacking and inhibits intersystem crossing simply due to noncoplanar phenyl groups to the anthracene moiety, which ultimately leads to a difference in the singlet and tripled excited states, resulting in a preferred fluorescence rather than phosphorescence emission (Scheme 2, right) [57]. In addition to the favorable energy (small) difference between (S1) and (T1) on anthracene moiety, the close proximity effect during the π-π stacking is another factor that favors ISC, suppressing one of the two preventing it. Scheme 2. Mechanism of intersystem crossing, anthracene (left), and diphenylanthracene (right) "Adapted with permission from Ref. [57]. Copyright 2021, American Chemical Society".
Due to its rigid, planar, electron-rich, and fully conjugated structure, the anthracene compound is known to react via: (i) Diels-Alder [4 + 4] and [4 + 2] cycloadditions, forming the dimer 3 and the peroxide 6 [58], in the presence of another anthracene molecule or singlet oxygen, respectively; (ii) electrophilic substitution to obtain 4 [59], and (iii) oxidation [60] to the anthraquinone 5 (Scheme 3). Such very diverse reactions of anthracene are of high importance in chemistry. The electrophilic substitution allows the synthesis of many different derivatives (e.g., halides, 4), which can further be used as precursors for synthesis of desired anthracene derivatives using cross-coupling reactions (e.g., Suzuki cross coupling). Of the same importance is the oxidation to the anthraquinone 5, where the two carbonyl groups would allow for further functionalizing the anthracene core simply by nucleophilic addition, followed by reductive aromatization [61,62]. Bulky substituted anthracene derivatives suppress inter-and intramolecular interactions due to steric hindrance, consequently enhancing the fluorescence emission. Nevertheless, they can still react with compounds reasonably small, such as with singlet oxygen to generate nonfluorescent endoperoxide compounds 8 as possible oxygen storages [63] (Scheme 4) [64]. Scheme 3. Anthracene reactions; [4 + 4] (photodimerization), [4 + 2] cycloaddition, electrophilic sub stitution, and oxidation in positions 9, 10.
Such very diverse reactions of anthracene are of high importance in chemistry. Th electrophilic substitution allows the synthesis of many different derivatives (e.g., halides 4), which can further be used as precursors for synthesis of desired anthracene derivative using cross-coupling reactions (e.g., Suzuki cross coupling). Of the same importance is th oxidation to the anthraquinone 5, where the two carbonyl groups would allow for furthe functionalizing the anthracene core simply by nucleophilic addition, followed by reduc tive aromatization [61,62]. Bulky substituted anthracene derivatives suppress inter-an intramolecular interactions due to steric hindrance, consequently enhancing the fluores cence emission. Nevertheless, they can still react with compounds reasonably small, suc as with singlet oxygen to generate nonfluorescent endoperoxide compounds 8 as possibl oxygen storages [63] (Scheme 4) [64]. The reaction of anthracene derivatives with singlet oxygen is of high importance a oxygen is very abundant in air and solubilized in almost all solvents. Thus, when usin anthracene-based sensors, for sensing, one needs to work in oxygen-free solvents to avoid misleading results.

Photodimerization
The photochemical dimerization of anthracene and its derivatives upon exposure t UV light is known since 1867 when Fritzsche isolated the dimer product of anthracen irradiated in benzene solution [65].
Dimerization of anthracene and its derivatives occurs via [4 + 4] photocycloadditio reaction, otherwise thermally forbidden due to the symmetry rules. The reaction involve absorption of a photon from the anthracene monomer in the ground state (S0), bringing i The reaction of anthracene derivatives with singlet oxygen is of high importance as oxygen is very abundant in air and solubilized in almost all solvents. Thus, when using anthracene-based sensors, for sensing, one needs to work in oxygen-free solvents to avoid misleading results.

Photodimerization
The photochemical dimerization of anthracene and its derivatives upon exposure to UV light is known since 1867 when Fritzsche isolated the dimer product of anthracene irradiated in benzene solution [65].
Dimerization of anthracene and its derivatives occurs via [4 + 4] photocycloaddition reaction, otherwise thermally forbidden due to the symmetry rules. The reaction involves absorption of a photon from the anthracene monomer in the ground state (S 0 ), bringing it to the singlet (S 1 ) or triplet (T 1 ) excited state. The excitation induces a change in the HOMO orbital symmetry of the excited anthracene monomer, which is like the LUMO orbital symmetry of the other anthracene monomer in the ground state, allowing them to form an exciplex (excited complex of two species), which then ultimately leads to the formation of the dimer 3 (out of several possible isomers) due to the formation of four benzene rings (and hence the thermodynamically more stable state). Subjecting 3 to thermal conditions leads to quantitative formation of the anthracene 1 (retro Diels-Alder reaction), possibly taking advantage of the strained bridge bonds ( Figure 18). Furthermore, the reduced conjugation system in the dimer (ortho-disubstituted benzene) makes it absorb much less light than anthracene ( Figure 19). Photochem 2023, 3, FOR PEER REVIEW 14 to the singlet (S1) or triplet (T1) excited state. The excitation induces a change in the HOMO orbital symmetry of the excited anthracene monomer, which is like the LUMO orbital symmetry of the other anthracene monomer in the ground state, allowing them to form an exciplex (excited complex of two species), which then ultimately leads to the formation of the dimer 3 (out of several possible isomers) due to the formation of four benzene rings (and hence the thermodynamically more stable state). Subjecting 3 to thermal conditions leads to quantitative formation of the anthracene 1 (retro Diels-Alder reaction), possibly taking advantage of the strained bridge bonds ( Figure 18). Furthermore, the reduced conjugation system in the dimer (ortho-disubstituted benzene) makes it absorb much less light than anthracene ( Figure 19).     During their work, it was found that the solvents (benzene, chloroform, acetic acid, and ethanol) did not influence the rate of dimerization, which was roughly equal. However, the presence of different substituents in position 9 considerably increased the rate of dimerization, with the rate increasing going from 9-methoxycarbonyl (-CHO, a), 9-formyl (-CH 2 OH, b), and 9-carboethoxy (-COOC 2 H 5 , c) proceeding smoothly.

Mechanism of Photodimerization
The mechanism of photodimerization has been extensively studied both in solution [67][68][69][70] and in the crystalline form [71]. Greene et al. observed that the ease of the dimerization reaction was roughly the same for several organic solvents. Furthermore, the product isolated was found to be the head-to-head photodimerization product ( Figure 20), clear evidence that the reaction proceeds via a radical process 12 and not through a pericyclic intermediate 13 as an alternative mechanism ( Figure 21).
The mechanism of photodimerization has been extensively studied both in solution [67][68][69][70] and in the crystalline form [71]. Greene et al. observed that the ease of the dimeri zation reaction was roughly the same for several organic solvents. Furthermore, the prod uct isolated was found to be the head-to-head photodimerization product ( Figure 20) clear evidence that the reaction proceeds via a radical process 12 and not through a peri cyclic intermediate 13 as an alternative mechanism ( Figure 21). Reactions proceeding in a concerted manner through a cyclic geometry transition state are known as pericyclic reactions. Those involving a diradical intermediate are reac tions where in the first step a radical formation is induced by light and then the resulting diradicals can cyclize after combination to form the photochemical product. In case of an ionic mechanism, one would expect to obtain the head-to-tail products 11 through inter mediate 14 ( Figure 22).

Photophysical Properties
Due to these versatile reactions and the intrinsic fluorescent properties, anthracene based compounds have attracted many researchers to synthesize and design different de rivatives to modify and improve their photophysical properties. In this chapter, we wil briefly discuss the photophysical properties of different anthracene derivatives.
We commence by discussing some interesting mechanofluorochromic properties o anthracene derivatives 15a-15b reported by Kusukawa et al. [72] (Scheme 5). Reactions proceeding in a concerted manner through a cyclic geometry transition state are known as pericyclic reactions. Those involving a diradical intermediate are reactions where in the first step a radical formation is induced by light and then the resulting diradicals can cyclize after combination to form the photochemical product. In case of an ionic mechanism, one would expect to obtain the head-to-tail products 11 through intermediate 14 ( Figure 22). [67][68][69][70] and in the crystalline form [71]. Greene et al. observed that the ease of the dimeri zation reaction was roughly the same for several organic solvents. Furthermore, the prod uct isolated was found to be the head-to-head photodimerization product ( Figure 20) clear evidence that the reaction proceeds via a radical process 12 and not through a peri cyclic intermediate 13 as an alternative mechanism ( Figure 21). Reactions proceeding in a concerted manner through a cyclic geometry transition state are known as pericyclic reactions. Those involving a diradical intermediate are reac tions where in the first step a radical formation is induced by light and then the resulting diradicals can cyclize after combination to form the photochemical product. In case of an ionic mechanism, one would expect to obtain the head-to-tail products 11 through inter mediate 14 ( Figure 22).

Photophysical Properties
Due to these versatile reactions and the intrinsic fluorescent properties, anthracene based compounds have attracted many researchers to synthesize and design different de rivatives to modify and improve their photophysical properties. In this chapter, we wil briefly discuss the photophysical properties of different anthracene derivatives.

Photophysical Properties
Due to these versatile reactions and the intrinsic fluorescent properties, anthracenebased compounds have attracted many researchers to synthesize and design different derivatives to modify and improve their photophysical properties. In this chapter, we will briefly discuss the photophysical properties of different anthracene derivatives.
Compounds that change their emission properties upon mechanical stress, e.g., grinding and pressing, are known as mechanochromic.
Fluorophores capable of responding to mechanical stress, such as grinding or pressing, are interesting candidates for applications in sensors [73] and memory chips [74]. This response is caused mainly by the change in the conformation, π-π stacking, and degree of conjugation with a possible mechanism depicted in Scheme 6. Compounds that change their emission properties upon mechanical stress, e.g. grinding and pressing, are known as mechanochromic.
Fluorophores capable of responding to mechanical stress, such as grinding or press ing, are interesting candidates for applications in sensors [73] and memory chips [74]. This Compounds that change their emission properties upon mechanical stress, e.g., grinding and pressing, are known as mechanochromic.
Fluorophores capable of responding to mechanical stress, such as grinding or pressing, are interesting candidates for applications in sensors [73] and memory chips [74]. This response is caused mainly by the change in the conformation, π-π stacking, and degree of conjugation with a possible mechanism depicted in Scheme 6. Scheme 6. Possible mechanism for the mechanofluorochromism of the 1,8-diphenylanthracene derivatives, (a) twisting of phenyl groups, and (b) excimer formation after grinding. "Reprinted permission from Ref. [72]. Copyright 2021, Elsevier B.V".
The changes caused after grinding are clearly observed in the emission spectrum in the case of compounds 15a and 15b bearing different substituents. In addition, in the first case, 15a, a partial self-recovery to a bluish emission, is observed (Figure 23a,b).  The changes caused after grinding are clearly observed in the emission spectrum in the case of compounds 15a and 15b bearing different substituents. In addition, in the first case, 15a, a partial self-recovery to a bluish emission, is observed (Figure 23a,b).
Fluorophores capable of responding to mechanical stress, such as grinding or pressing, are interesting candidates for applications in sensors [73] and memory chips [74]. This response is caused mainly by the change in the conformation, π-π stacking, and degree of conjugation with a possible mechanism depicted in Scheme 6. The changes caused after grinding are clearly observed in the emission spectrum in the case of compounds 15a and 15b bearing different substituents. In addition, in the first case, 15a, a partial self-recovery to a bluish emission, is observed (Figure 23a,b).  In 2007, the group of Slugovc et al. [75] reported the influence of the hydroxy groups in the photophysical properties under the neutral and alkaline condition using ortho, meta, and para isomers of 16, 17, and 18 (Scheme 7).
Under neutral conditions, the ligand was fully protonated, and all three derivatives (16-18) showed a well-structured absorption spectrum like simple anthracene. In the deprotonated form at basic pH, the absorption spectrum was red-shifted and slightly broadened. While, for the absorption, no major change was observed between the three derivatives under different pH conditions (neutral, basic), a striking result was observed in the emission. A drastic decrease in intensity from a quantum yield of 80% in the protonated form at neutral pH to only 1% in basic pH was observed for compound 17, which is attributed to drastic change of the electronic properties in the excited state ( Figure 24).
In 2007, the group of Slugovc et al. [75] reported the influence of the hydroxy in the photophysical properties under the neutral and alkaline condition using ort and para isomers of 16, 17, and 18 (Scheme 7). Scheme 7. Synthesis of 9,10-bis(p-hydroxyphenyl)anthracene.
Under neutral conditions, the ligand was fully protonated, and all three de (16)(17)(18) showed a well-structured absorption spectrum like simple anthracene deprotonated form at basic pH, the absorption spectrum was red-shifted and broadened. While, for the absorption, no major change was observed between t derivatives under different pH conditions (neutral, basic), a striking result was o in the emission. A drastic decrease in intensity from a quantum yield of 80% in th nated form at neutral pH to only 1% in basic pH was observed for compound 17, attributed to drastic change of the electronic properties in the excited state (Figur Another series of anthracene-based derivatives, this time with an alkyne m corporated, was reported by the group of Wei et al. [76] in 2017 (Scheme 8). Under neutral conditions, the ligand was fully protonated, and all three der (16)(17)(18) showed a well-structured absorption spectrum like simple anthracene deprotonated form at basic pH, the absorption spectrum was red-shifted and broadened. While, for the absorption, no major change was observed between th derivatives under different pH conditions (neutral, basic), a striking result was o in the emission. A drastic decrease in intensity from a quantum yield of 80% in th nated form at neutral pH to only 1% in basic pH was observed for compound 17, w attributed to drastic change of the electronic properties in the excited state ( Figure   Figure 24. Absorption and emission spectra of 16 in MeOH. ■ Absorption of the protonated • absorption upon addition of NaOH, □ emission of the protonated species (λexc = 375 nm) emission upon addition of NaOH. Reprinted with permission from Ref. [75]. Copyrig Springer-Verlag".
Another series of anthracene-based derivatives, this time with an alkyne mo corporated, was reported by the group of Wei et al. [76] in 2017 (Scheme 8).  • absorption upon addition of NaOH, □ emission of the protonated species (λ exc = 375 nm), and 〇 emission upon addition of NaOH. Reprinted with permission from Ref. [75]. Copyright 2007, Springer-Verlag.
Another series of anthracene-based derivatives, this time with an alkyne moiety incorporated, was reported by the group of Wei et al. [76] in 2017 (Scheme 8). Scheme 7. Synthesis of 9,10-bis(p-hydroxyphenyl)anthracene.
Under neutral conditions, the ligand was fully protonated, and all three der (16)(17)(18) showed a well-structured absorption spectrum like simple anthracene deprotonated form at basic pH, the absorption spectrum was red-shifted and broadened. While, for the absorption, no major change was observed between t derivatives under different pH conditions (neutral, basic), a striking result was o in the emission. A drastic decrease in intensity from a quantum yield of 80% in th nated form at neutral pH to only 1% in basic pH was observed for compound 17, attributed to drastic change of the electronic properties in the excited state (Figur Another series of anthracene-based derivatives, this time with an alkyne m corporated, was reported by the group of Wei et al. [76] in 2017 (Scheme 8). Just as expected, different substituents strongly affected their photophysical properties.
Both absorption and the emission spectra for all three derivatives were investigated in dichloromethane as solvent. Going from compound 19 to 21, a red shift in the absorbance is observed where the well-structured absorption spectrum in 19 is dissipated into two broader peaks in 20, which are even more obvious in 21. The bathochromic shift is mainly due to the increase in the conjugation system by adding either phenyl, which increases the π system to some extent, or a coupled phenyl alkyne system, which increases it even more, confirming once again the influence of different types of substituents [77] in the absorption and emission properties ( Figure 25A). The same difference is observed in the emission spectrum where all derivatives emit in the region of blue to bluish green. A more prominent difference in emission is found between compounds 19a and 19b, where, in addition, the large Stokes shift (113 nm) in compound 19b reveals the difference between the electronic ground and excited states of this compound, apparently due to the aldehyde electron withdrawing group, which expands the conjugation system, therefore lowering the HOMO-LUMO gap ( Figure 25B). Photophysical properties for these compounds are summarized in Table 1.
Both absorption and the emission spectra for all three derivatives were investigated in dichloromethane as solvent. Going from compound 19 to 21, a red shift in the absorbance is observed where the well-structured absorption spectrum in 19 is dissipated into two broader peaks in 20, which are even more obvious in 21. The bathochromic shift is mainly due to the increase in the conjugation system by adding either phenyl, which increases the π system to some extent, or a coupled phenyl alkyne system, which increases it even more, confirming once again the influence of different types of substituents [77] in the absorption and emission properties ( Figure 25A). The same difference is observed in the emission spectrum where all derivatives emit in the region of blue to bluish green. A more prominent difference in emission is found between compounds 19a and 19b, where, in addition, the large Stokes shift (113 nm) in compound 19b reveals the difference between the electronic ground and excited states of this compound, apparently due to the aldehyde electron withdrawing group, which expands the conjugation system, therefore lowering the HOMO-LUMO gap ( Figure 25B). Photophysical properties for these compounds are summarized in Table 1.  Other π-extended anthracene fluorophores (22) and (23) (Figure 26) were synthesized by the group of Wang et al. [78] involving a π-π conjugation system in the lateral direction and n-π conjugation in the longitudinal direction through the nitrogen atom, which establishes a π-n-π conjugation (the nitrogen lone pair serves as a bridge to connect the two aromatic systems). Both compounds showed strong luminescent emission in solution and in the solid state with face-to-face (π-π) interactions dominating the arrangement, whereas the C/N-H…π interactions observed in the lattice of compound 23 probably are  a Maximum absorption wavelength measured in dichloromethane at about 10 -5 -10 -6 mol/L and 25 • C; b the quantum yields were measured in dichloromethane using quinine sulfate in sulfuric acid (Φ = 0.55) as the standard.
Other π-extended anthracene fluorophores (22) and (23) ( Figure 26) were synthesized by the group of Wang et al. [78] involving a π-π conjugation system in the lateral direction and n-π conjugation in the longitudinal direction through the nitrogen atom, which establishes a π-n-π conjugation (the nitrogen lone pair serves as a bridge to connect the two aromatic systems). Both compounds showed strong luminescent emission in solution and in the solid state with face-to-face (π-π) interactions dominating the arrangement, whereas the C/N-H . . . π interactions observed in the lattice of compound 23 probably are due to the presence of the trimethylsilyl (TMS) groups, posing steric hindrance for face-to-face interaction, thus avoiding possible excimer formation.   Figure 27A) at 250-340 nm is mainly attributed to n-π* (N-Ph) and π sitions, whereas the weak absorbance at 410-550 nm is attributed to the π-con over the entire molecule and across the nitrogen (N) atom. In addition, both com were not sensitive to the solvent polarity, but it was strongly temperature depend ure 27C). As the temperature was lowered, the fluorescence emission was increas is a general trend since, at lower temperature, the molecular vibrations are red proportion with nonradiative processes that otherwise diminish the radiative e due to the competing nonradiative pathways. So far, by decorating the anthracene moieties with different functional grou photochemical properties change accordingly. This is mainly because their e properties and inter-/intramolecular interactions change as well. Nevertheless, of modifying the anthracene building blocks sometimes is not straightforward du ficulties encountered during the synthesis and the time required and the expense Another way of changing their photophysical properties, specifically in t state, is by controlling the chromophore packing. Just as in the case of chemical m  Figure 27B), which is attributed to the lack of the TMS donating group. The strong absorbance band in 22 ( Figure 27A) at 250-340 nm is mainly attributed to n-π* (N-Ph) and π-π* transitions, whereas the weak absorbance at 410-550 nm is attributed to the π-conjugation over the entire molecule and across the nitrogen (N) atom. In addition, both compounds were not sensitive to the solvent polarity, but it was strongly temperature dependent ( Figure 27C). As the temperature was lowered, the fluorescence emission was increased. This is a general trend since, at lower temperature, the molecular vibrations are reduced in proportion with nonradiative processes that otherwise diminish the radiative emission due to the competing nonradiative pathways.
due to the presence of the trimethylsilyl (TMS) groups, posing steric hindrance to-face interaction, thus avoiding possible excimer formation.  Figure 27A) at 250-340 nm is mainly attributed to n-π* (N-Ph) and πsitions, whereas the weak absorbance at 410-550 nm is attributed to the π-con over the entire molecule and across the nitrogen (N) atom. In addition, both com were not sensitive to the solvent polarity, but it was strongly temperature depend ure 27C). As the temperature was lowered, the fluorescence emission was increas is a general trend since, at lower temperature, the molecular vibrations are red proportion with nonradiative processes that otherwise diminish the radiative e due to the competing nonradiative pathways. So far, by decorating the anthracene moieties with different functional grou photochemical properties change accordingly. This is mainly because their el properties and inter-/intramolecular interactions change as well. Nevertheless, t of modifying the anthracene building blocks sometimes is not straightforward du ficulties encountered during the synthesis and the time required and the expense Another way of changing their photophysical properties, specifically in t state, is by controlling the chromophore packing. Just as in the case of chemical m tion, this method can also lead to the desired luminescent properties because in t state, the photophysical properties depend on the total collective rather than th So far, by decorating the anthracene moieties with different functional groups, their photochemical properties change accordingly. This is mainly because their electronic properties and inter-/intramolecular interactions change as well. Nevertheless, this way of modifying the anthracene building blocks sometimes is not straightforward due to difficulties encountered during the synthesis and the time required and the expenses.
Another way of changing their photophysical properties, specifically in the solid state, is by controlling the chromophore packing. Just as in the case of chemical modification, this method can also lead to the desired luminescent properties because in the solid state, the photophysical properties depend on the total collective rather than the single molecule [79,80]. To study the influence of chromophore arrangement on the photophysical properties in a systematic way, Zhang et al. [81] synthesized four different anthracene derivatives with two of them having a flexible (24 and 25) and the other two (26 and 27) a rigid structure due to conjugation ( Figure 28).
In solution, all four compounds showed similar well-structured absorptions in the region of 325-420 nm, attributed to the π-π* transition of the anthracene moiety. They differed, however, slightly in the extinction coefficient, with compound 26 having a stronger absorption (Figure 29a). Besides, compounds 24-27 showed similar fluorescent emission under the same conditions (diluted chloroform), displaying only a weak effect induced by the anthracene position relative to the pyrazole moiety (Figure 29b). molecule [79,80]. To study the influence of chromophore arrangement on the photophys ical properties in a systematic way, Zhang et al. [81] synthesized four different anthracen derivatives with two of them having a flexible (24 and 25) and the other two (26 and 27) rigid structure due to conjugation ( Figure 28). In solution, all four compounds showed similar well-structured absorptions in th region of 325-420 nm, attributed to the π-π* transition of the anthracene moiety. The differed, however, slightly in the extinction coefficient, with compound 26 having stronger absorption (Figure 29a). Besides, compounds 24-27 showed similar fluorescen emission under the same conditions (diluted chloroform), displaying only a weak effec induced by the anthracene position relative to the pyrazole moiety (Figure 29b). However, in contrast to the solution studies, compounds 24-27 showed very differen emission spectra in the solid state. More interestingly, their emission does not only diffe among the different compounds, but it also differs even between the same compound that can have different crystal packings. This difference in the emission properties i mainly due to different arrangement in the crystal structure as we discussed above due t  [79,80]. To study the influence of chromophore arrangement on the photo ical properties in a systematic way, Zhang et al. [81] synthesized four different anthr derivatives with two of them having a flexible (24 and 25) and the other two (26 and rigid structure due to conjugation ( Figure 28). In solution, all four compounds showed similar well-structured absorptions region of 325-420 nm, attributed to the π-π* transition of the anthracene moiety. differed, however, slightly in the extinction coefficient, with compound 26 hav stronger absorption (Figure 29a). Besides, compounds 24-27 showed similar fluore emission under the same conditions (diluted chloroform), displaying only a weak induced by the anthracene position relative to the pyrazole moiety (Figure 29b). However, in contrast to the solution studies, compounds 24-27 showed very diff emission spectra in the solid state. More interestingly, their emission does not only among the different compounds, but it also differs even between the same compo that can have different crystal packings. This difference in the emission proper mainly due to different arrangement in the crystal structure as we discussed above d different crystallizing conditions. For instance, the authors could synthesize two diff crystals of compound 24 (24a and 24b). 24a shows a red shift with the emission ly the green region (λmax = 515 nm), whereas 24b crystals emit in the blue region (λmax nm). The different photophysical properties of the same compound with different tures are almost exclusively attributed to different crystal arrangements. Indeed, pound 1a shows π-π interactions between the anthracene building blocks, wherea However, in contrast to the solution studies, compounds 24-27 showed very different emission spectra in the solid state. More interestingly, their emission does not only differ among the different compounds, but it also differs even between the same compounds that can have different crystal packings. This difference in the emission properties is mainly due to different arrangement in the crystal structure as we discussed above due to different crystallizing conditions. For instance, the authors could synthesize two different crystals of compound 24 (24a and 24b). 24a shows a red shift with the emission lying in the green region (λ max = 515 nm), whereas 24b crystals emit in the blue region (λ max = 424 nm). The different photophysical properties of the same compound with different structures are almost exclusively attributed to different crystal arrangements. Indeed, compound 1a shows π-π interactions between the anthracene building blocks, whereas 24b does not show such interactions. The other three compounds show a similar behavior to compound 24 except compound 25, where the fluorescent emission for 25a and 25b was almost overlapping, which can be explained by closely similar crystal packing ( Figure 30).

J-Aggregate
Organic molecules, such as dyes, usually aggregate in highly concentrated [82] solution or in the solid state. This tendency of aggregation affects the photophysical properties of chromophores capable of absorbing and emitting light. The effect in the photophysical properties is mainly caused by π-π stacking and hydrogen bonding interaction, leading to the formation of J-and H-aggregates. Depending on the chromophore structure, and the possibility to form hydrogen bonding, the emission from the solid state sometimes is less intense [83,84] than in solution. However, this is not always the case as it is known that some fluorescence is quite intensive in the solid state. The reason behind that comes from the fact that the structural conformation of the chromophore in the solid state is "frozen", allowing for more conjugation. At the same time, due to the rigidity, there will be less vibration, which otherwise can lead to loss of energy to the environment. These phenomena are attributed to the formation of J-and H-aggregates [85].

J-Aggregate
Organic molecules, such as dyes, usually aggregate in highly concentrated [82] so tion or in the solid state. This tendency of aggregation affects the photophysical propert of chromophores capable of absorbing and emitting light. The effect in the photophysi properties is mainly caused by π-π stacking and hydrogen bonding interaction, lead to the formation of J-and H-aggregates. Depending on the chromophore structure, a the possibility to form hydrogen bonding, the emission from the solid state sometime less intense [83,84] than in solution. However, this is not always the case as it is kno that some fluorescence is quite intensive in the solid state. The reason behind that com from the fact that the structural conformation of the chromophore in the solid state is "f zen", allowing for more conjugation. At the same time, due to the rigidity, there will less vibration, which otherwise can lead to loss of energy to the environment. These p nomena are attributed to the formation of J-and H-aggregates [85].
J-aggregates are typically characterized by narrow intense bathochromic (red) shif absorptions, whereas H-aggregates are shifting opposite (H-aggregate, Table 2, Figure 3 Some of their important and distinguishable photophysical properties are given in J-aggregates are typically characterized by narrow intense bathochromic (red) shifted absorptions, whereas H-aggregates are shifting opposite (H-aggregate, Table 2, Figure 31). Some of their important and distinguishable photophysical properties are given in the table below.  While such effects have been observed by many research groups, we will herein provide some selected cases. For instance, Xiao et al. [87] used two simple anthracene derivatives, DBA (9,10-dibromoanthracene) 4 and DCNA (9,10-dicyanoanthracene) 28, to synthesize anthracene-derived nanowires ( Figure 32) for applications in nanoscience and nanotechnology [88][89][90]. The prepared nanowires of DBA and DCNA in aqueous solution showed a bathochromic shift both in the absorption and in the emission spectrum, which implies the formation of J-type aggregates, hence slight offset parallel arrangements between the aromatic systems ( Figure 33). However, the emission intensities were drastically decreased in the case of the DBA compound due to the heavy atom effect (Figure 33a), whereas the emission of DCNA was stronger than that of DBA (Figure 33b).  While such effects have been observed by many research groups, we will herein provide some selected cases. For instance, Xiao et al. [87] used two simple anthracene derivatives, DBA (9,10-dibromoanthracene) 4 and DCNA (9,10-dicyanoanthracene) 28, to synthesize anthracene-derived nanowires ( Figure 32) for applications in nanoscience and nanotechnology [88][89][90]. While such effects have been observed by many research groups, we will herein provide some selected cases. For instance, Xiao et al. [87] used two simple anthracene derivatives, DBA (9,10-dibromoanthracene) 4 and DCNA (9,10-dicyanoanthracene) 28, to synthesize anthracene-derived nanowires ( Figure 32) for applications in nanoscience and nanotechnology [88][89][90]. The prepared nanowires of DBA and DCNA in aqueous solution showed a bathochromic shift both in the absorption and in the emission spectrum, which implies the formation of J-type aggregates, hence slight offset parallel arrangements between the aromatic systems ( Figure 33). However, the emission intensities were drastically decreased in the case of the DBA compound due to the heavy atom effect (Figure 33a), whereas the emission of DCNA was stronger than that of DBA (Figure 33b).  The prepared nanowires of DBA and DCNA in aqueous solution showed a bathochromic shift both in the absorption and in the emission spectrum, which implies the formation of J-type aggregates, hence slight offset parallel arrangements between the aromatic systems ( Figure 33). However, the emission intensities were drastically decreased in the case of the DBA compound due to the heavy atom effect (Figure 33a), whereas the emission of DCNA was stronger than that of DBA (Figure 33b). 9-Phenylanthracenyl is modified with rhodamine derivatives, such as tetramethyl rhodamine (TMR) or the silicon-based rhodamine (Si-TMR), to obtain 29, 30. Ref. [91] leads to the formation J-aggregates in aqueous halide ion solution, even though the rhodamine derivatives are known to usually form H-type aggregates under similar conditions [92] (Figures 34 and 35).
Photochem 2023, 3, FOR PEER REVIEW 23 leads to the formation J-aggregates in aqueous halide ion solution, even though the rhodamine derivatives are known to usually form H-type aggregates under similar conditions [92] (Figures 34 and 35).  Aggregates with photophysical properties typical for that of the J-type aggregates are also reported by An et al. [85]. Addition of water to a THF solution of 31 led to the formation of nanoparticle-sized aggregates, which showed a red shift in both absorbance ( Figure 36a) and emission (Figure 36b) with an enhancement of the intensity of the latter. Figure 36 depicts the chemical structure of CN-MBE (left) and J-aggregate formation inducing enhanced emission (right) [85].
The formation of the J-type aggregates is attributed mainly to the presence of the CN group, which apparently does not allow face-to-face aggregation due to steric effects [93], thus leading to the formation of head-to-tail J-aggregates.  Aggregates with photophysical properties typical for that of the J-type aggregates are also reported by An et al. [85]. Addition of water to a THF solution of 31 led to the formation of nanoparticle-sized aggregates, which showed a red shift in both absorbance ( Figure 36a) and emission (Figure 36b) with an enhancement of the intensity of the latter. Figure 36 depicts the chemical structure of CN-MBE (left) and J-aggregate formation inducing enhanced emission (right) [85].
Photochem 2023, 3, FOR PEER REVIEW 23 leads to the formation J-aggregates in aqueous halide ion solution, even though the rhodamine derivatives are known to usually form H-type aggregates under similar conditions [92] (Figures 34 and 35).  Aggregates with photophysical properties typical for that of the J-type aggregates are also reported by An et al. [85]. Addition of water to a THF solution of 31 led to the formation of nanoparticle-sized aggregates, which showed a red shift in both absorbance ( Figure 36a) and emission (Figure 36b) with an enhancement of the intensity of the latter. Figure 36 depicts the chemical structure of CN-MBE (left) and J-aggregate formation inducing enhanced emission (right) [85].
The formation of the J-type aggregates is attributed mainly to the presence of the CN group, which apparently does not allow face-to-face aggregation due to steric effects [93], thus leading to the formation of head-to-tail J-aggregates.  (29) in methanol (black) and changes in the absorption spectra upon the addition of NaCl from 0 to 100 mM to the TMR-An (29) in Milli-Q water (green to red). (Right) Normalized absorption spectra of SiR-An (30) monomer in methanol (black) and changes in absorption spectra (dashed black line to red). M and J indicate the absorption from the monomer and J-aggregates. Reprinted with permission from Ref. [91]. Copyright 2015, The Royal Society of Chemistry.
Photochem 2023, 3, FOR PEER REVIEW 23 leads to the formation J-aggregates in aqueous halide ion solution, even though the rhodamine derivatives are known to usually form H-type aggregates under similar conditions [92] (Figures 34 and 35).  Aggregates with photophysical properties typical for that of the J-type aggregates are also reported by An et al. [85]. Addition of water to a THF solution of 31 led to the formation of nanoparticle-sized aggregates, which showed a red shift in both absorbance ( Figure 36a) and emission (Figure 36b) with an enhancement of the intensity of the latter. Figure 36 depicts the chemical structure of CN-MBE (left) and J-aggregate formation inducing enhanced emission (right) [85].
The formation of the J-type aggregates is attributed mainly to the presence of the CN group, which apparently does not allow face-to-face aggregation due to steric effects [93], thus leading to the formation of head-to-tail J-aggregates.  The formation of the J-type aggregates is attributed mainly to the presence of the CN group, which apparently does not allow face-to-face aggregation due to steric effects [93], thus leading to the formation of head-to-tail J-aggregates.
In 2009, Swager et al. [94] synthesized different fluorescent macrocycles based on 1,3butadiyne-bridged dibenz [a,j]anthracene, and by studying their photophysical properties, they observed the formation of J-aggregates in highly concentrated solution and in thin films ( Figure 37). Photochem 2023, 3, FOR PEER REVIEW 24 In 2009, Swager et al. [94] synthesized different fluorescent macrocycles based on 1,3butadiyne-bridged dibenz [a,j]anthracene, and by studying their photophysical properties, they observed the formation of J-aggregates in highly concentrated solution and in thin films (Figure 37). The resulting anthracene-based macrocycles were used to study their photophysical properties using UV-VIS and fluorescence spectroscopy. All four compounds (32a, 32b, 33, and 34) showed similar absorption spectra, with compound 34 differing slightly more, due to the larger difference in its chemical structure compared with its analogues, as 34 was lacking the cyclic structure. Compound 33 showed a slight red shift relative to 32a and 32b (32a and 32b showed similar absorption spectra), which comes most probably from the presence of the alkoxy groups, whereas compound 34, due to the lack of the cycle and reduced conjugation, led to a slightly blue-shifted absorption. In addition, compound 34 showed a larger Stokes shift, and this is attributed to the lack of rigidity and higher flexibility as noncyclic compound (Figure 38, left). A bathochromic shift, high-intensity and narrow emission peaks, and small Stokes shifts found for a film of compound 32a (red) compared with that of 32a in solution (blue) clearly indicate the formation of J-aggregates [94] (Figure 38, right).  The resulting anthracene-based macrocycles were used to study their photophysical properties using UV-VIS and fluorescence spectroscopy. All four compounds (32a, 32b, 33, and 34) showed similar absorption spectra, with compound 34 differing slightly more, due to the larger difference in its chemical structure compared with its analogues, as 34 was lacking the cyclic structure. Compound 33 showed a slight red shift relative to 32a and 32b (32a and 32b showed similar absorption spectra), which comes most probably from the presence of the alkoxy groups, whereas compound 34, due to the lack of the cycle and reduced conjugation, led to a slightly blue-shifted absorption. In addition, compound 34 showed a larger Stokes shift, and this is attributed to the lack of rigidity and higher flexibility as noncyclic compound (Figure 38, left). A bathochromic shift, high-intensity and narrow emission peaks, and small Stokes shifts found for a film of compound 32a (red) compared with that of 32a in solution (blue) clearly indicate the formation of J-aggregates [94] ( Figure 38, right). Another interesting work concerning the J-type aggregates and their photophysical properties was published by the group of Sakar in 2018. In order to understand the photochemical properties of twisted fluorescent organic compounds, they synthesized two twisted biaryl compounds 36 BA and DCBA 37 and compared them with monoaryl AN and CA [95] (left).
The formation of J-type aggregates was confirmed by a red shift in absorbance (Figure 39a,b), but interestingly, they showed a blue shift in the emission spectrum (Figure 40a,b). This could be explained by the presence of a C-C bond in 37 between the anthracene units, which can induce a change in the geometry during the self-assembly process, which then suppresses the charge transfer state, thus causing a blue shift and lowering the emission efficiency ( Figure 40).

Photochem 2023, 3, FOR PEER REVIEW 25
The formation of J-type aggregates was confirmed by a red shift in absorbance (Figure 39a,b), but interestingly, they showed a blue shift in the emission spectrum ( Figure  40a,b). This could be explained by the presence of a C-C bond in 37 between the anthracene units, which can induce a change in the geometry during the self-assembly process, which then suppresses the charge transfer state, thus causing a blue shift and lowering the emission efficiency ( Figure 40).   (37) in molecular form in DMSO (black) and aggregated form in water-DMSO mixture (red). The inset provides the normalized emission spectra of BA and DCBA in the molecular and aggregated states. Reprinted with permission from Ref. [95]. Copyright 2018, American Chemical Society.

H-Aggregate
Additionally, H-aggregates can be formed in concentrated solution and in the solid state. Nevertheless, their perfect head-to-head (face to face) interaction makes them different from other aggregation types (e.g., J-type), thus leading to blue (hypsochromic) shifts in the absorbance spectrum [96]. A typical example of H-type aggregates is shown by Gierschner et al. [97,98] using different derivatives of distyrylbenzene 38 (DSB), 39 F12DSB, and 40 t-Bu4DSB (Figure 41).

REVIEW 25
The formation of J-type aggregates was confirmed by a red shift in absorbance (Figure 39a,b), but interestingly, they showed a blue shift in the emission spectrum ( Figure  40a,b). This could be explained by the presence of a C-C bond in 37 between the anthracene units, which can induce a change in the geometry during the self-assembly process, which then suppresses the charge transfer state, thus causing a blue shift and lowering the emission efficiency ( Figure 40).   (37) in molecular form in DMSO (black) and aggregated form in water-DMSO mixture (red). The inset provides the normalized emission spectra of BA and DCBA in the molecular and aggregated states. Reprinted with permission from Ref. [95]. Copyright 2018, American Chemical Society.

H-Aggregate
Additionally, H-aggregates can be formed in concentrated solution and in the solid state. Nevertheless, their perfect head-to-head (face to face) interaction makes them different from other aggregation types (e.g., J-type), thus leading to blue (hypsochromic)  (37) in molecular form in DMSO (black) and aggregated form in water-DMSO mixture (red). The inset provides the normalized emission spectra of BA and DCBA in the molecular and aggregated states. Reprinted with permission from Ref. [95]. Copyright 2018, American Chemical Society.

H-Aggregate
Additionally, H-aggregates can be formed in concentrated solution and in the solid state. Nevertheless, their perfect head-to-head (face to face) interaction makes them different from other aggregation types (e.g., J-type), thus leading to blue (hypsochromic) shifts in the absorbance spectrum [96]. A typical example of H-type aggregates is shown by Gierschner et al. [97,98]  The investigation showed that distyrylbenzene 38 (DSB) arranges in a herringbone manner, with the long axes oriented in parallel, but the short axes nearly perpendicular to each other. In contrast, polyfluorinated distyrylbenzene 39 and the 1/1 mixture of DSB: F12DSB cocrystals arrange face-to-face via π-π stacking in the solid state, thus as H-aggregates. Photophysical investigation showed that compounds arranged face-to-face DSB: F12DSB and F12DSB show strong interactions and express a strong blue shift in the absorption spectrum as well as an unstructured strong red-shifted excimer-like spectrum, compared with DSB alone, which shows a similar well-structured emission spectrum to the one in solution due to weak intermolecular vibronic coupling ( Figure 41).
In general, the H-type aggregates are known to be less efficient in photoluminescent emission due to their high/strong interaction between the aggregates in the solid state. However, Wang et al. [99] could efficiently increase the emission intensity of tetracene 41 and pentacene 42 (guest compounds) by doping into trans-DSB compound 38 (host compound). The crystal structures of tetracene and pentacene induce self-quenching, leading to a very low emission efficiency due to the H-aggregates and strong vibronic interactions, whereas doping these two compounds into DSB increases the emission efficiency by up to 74% due to the lack of intermolecular aggregation. Furthermore, controlling the amount of doped tetracene and pentacene leads to the emission of different colors. Undoped DSB crystals give blue emission, whereas the doped crystals with tetracene and pentacene give green and red emissions, respectively ( Figure 42). The investigation showed that distyrylbenzene 38 (DSB) arranges in a herringbone manner, with the long axes oriented in parallel, but the short axes nearly perpendicular to each other. In contrast, polyfluorinated distyrylbenzene 39 and the 1/1 mixture of DSB: F 12 DSB cocrystals arrange face-to-face via π-π stacking in the solid state, thus as Haggregates. Photophysical investigation showed that compounds arranged face-to-face DSB: F 12 DSB and F 12 DSB show strong interactions and express a strong blue shift in the absorption spectrum as well as an unstructured strong red-shifted excimer-like spectrum, compared with DSB alone, which shows a similar well-structured emission spectrum to the one in solution due to weak intermolecular vibronic coupling ( Figure 41).
In general, the H-type aggregates are known to be less efficient in photoluminescent emission due to their high/strong interaction between the aggregates in the solid state. However, Wang et al. [99] could efficiently increase the emission intensity of tetracene 41 and pentacene 42 (guest compounds) by doping into trans-DSB compound 38 (host compound). The crystal structures of tetracene and pentacene induce self-quenching, leading to a very low emission efficiency due to the H-aggregates and strong vibronic interactions, whereas doping these two compounds into DSB increases the emission efficiency by up to 74% due to the lack of intermolecular aggregation. Furthermore, controlling the amount of doped tetracene and pentacene leads to the emission of different colors. Undoped DSB crystals give blue emission, whereas the doped crystals with tetracene and pentacene give green and red emissions, respectively (Figure 42). to a very low emission efficiency due to the H-aggregates and strong vibronic interactions, whereas doping these two compounds into DSB increases the emission efficiency by up to 74% due to the lack of intermolecular aggregation. Furthermore, controlling the amount of doped tetracene and pentacene leads to the emission of different colors. Undoped DSB crystals give blue emission, whereas the doped crystals with tetracene and pentacene give green and red emissions, respectively ( Figure 42).  His findings were in line with the work of Gierschner and others, si investigation, he found different photophysical properties depending on t position of fluorination. Hence, DSA, 4-BFSA, 3-BFSA, BDFSA, and BTFSA ent photophysical properties due to different packings. In addition, DSA hibited solvatochromic effect; red-shift emission is observed by increasing larity [100] (Table 3). Table 3. Photophysical properties of DSA derivatives. 0  30  50  70  90  HEX  TOL  DCM A  DSA  410  52  508  14  556  571  568  491  506  545  559  578  5  4-BFSA  410  53  502  18  557  561  576  482  480  545  558  567  5  3-BFSA  410  57  518  49  558  566  567  491  504  545  555  576  5  BDFSA  412  59  448  62  555  566  567  491  505  542  553  560  5  BTFSA  413  56  579  39  509  508  508  508  544  502  506 510 5 a HEX: n-hexane; Tol: toluene; Me: methanol; DCM: dichloromethane; ACT: aceton orescence quantum yield estimated by using 9,10-diphenylanthracene as the stand His findings were in line with the work of Gierschner and others, since during the investigation, he found different photophysical properties depending on the degree and position of fluorination. Hence, DSA, 4-BFSA, 3-BFSA, BDFSA, and BTFSA express different photophysical properties due to different packings. In addition, DSA derivatives exhibited solvatochromic effect; red-shift emission is observed by increasing the solvent polarity [100] (Table 3).

Excimers
Aggregates of two atoms/molecules that can be formed only in the excited states are called excimer (excited dimer). Furthermore, this species can only exist in the excited state because the ground state of the dimer [101] is not energetically favorable [102]. Typically, excimers [M A M A ]* are formed when monomer M A is excited from the ground state to the excited state M * A by absorbing a photon. Then the excited monomer M * A forms the excimer [M A M A ]* with another monomer M A from the ground state ( Figure 44). 410  57  518  49  558  566  567  491  504  545  555  576  582  BDFSA  412  59  448  62  555  566  567  491  505  542  553  560  568  BTFSA  413  56  579  39  509  508  508  508  544  502  506 510 505 a HEX: n-hexane; Tol: toluene; Me: methanol; DCM: dichloromethane; ACT: acetone. b Solu orescence quantum yield estimated by using 9,10-diphenylanthracene as the standard.

Excimers
Aggregates of two atoms/molecules that can be formed only in the excited st called excimer (excited dimer). Furthermore, this species can only exist in the excit because the ground state of the dimer [101] is not energetically favorable [102]. Ty excimers [MAMA]* are formed when monomer MA is excited from the ground sta excited state * by absorbing a photon. Then the excited monomer * forms cimer [MAMA]* with another monomer MA from the ground state ( Figure 44). This process consists of light absorption, association, emission [103], and diss to the ground state (Figure 45a) The photophysical properties of the excimer diff those of the monomer alone [104], showing a red shift and longer lifetime as w structureless emission spectrum (Figure 45b). This process consists of light absorption, association, emission [103], and dissociation to the ground state (Figure 45a) The photophysical properties of the excimer differ from those of the monomer alone [104], showing a red shift and longer lifetime as well as a structureless emission spectrum (Figure 45b). Anthracene, on the other hand, might have five possible excimers: normal dimer [105], offset, twisted [106], T-shaped, and twisted plus end-overlapped dimers (Figure 46 [107,108]. To better understand the relationship between the structure and the photophysica properties of an excimer, it is of high importance to find a real model, which forms a singl and pure excimer. One can think of simple aromatic compounds such as benzene, naph thalene, or anthracene, but the problem with such compounds is that they usually form infinite herringbone arrangements, which are far from what is indeed needed.
Nevertheless, such an excimer with a similar emission in solution and in the soli state is formed by the monosubstituted 2-(anthracen-9-yl)thianthrene (2-TA-AN) 49 pre sented by the group of Gao et al. [109,110] (Figure 47). Anthracene, on the other hand, might have five possible excimers: normal dimers [105], offset, twisted [106], T-shaped, and twisted plus end-overlapped dimers ( Figure 46) [107,108]. Anthracene, on the other hand, might have five possible excimers: norma [105], offset, twisted [106], T-shaped, and twisted plus end-overlapped dimers (Fi [107,108]. To better understand the relationship between the structure and the photo properties of an excimer, it is of high importance to find a real model, which forms and pure excimer. One can think of simple aromatic compounds such as benzen thalene, or anthracene, but the problem with such compounds is that they usua infinite herringbone arrangements, which are far from what is indeed needed. Nevertheless, such an excimer with a similar emission in solution and in t state is formed by the monosubstituted 2-(anthracen-9-yl)thianthrene (2-TA-AN sented by the group of Gao et al. [109,110] (Figure 47). To better understand the relationship between the structure and the photophysical properties of an excimer, it is of high importance to find a real model, which forms a single and pure excimer. One can think of simple aromatic compounds such as benzene, naphthalene, or anthracene, but the problem with such compounds is that they usually form infinite herringbone arrangements, which are far from what is indeed needed.
Nevertheless, such an excimer with a similar emission in solution and in the solid state is formed by the monosubstituted 2-(anthracen-9-yl)thianthrene (2-TA-AN) 49 presented by the group of Gao et al. [109,110] (Figure 47).
properties of an excimer, it is of high importance to find a real model, which forms a single and pure excimer. One can think of simple aromatic compounds such as benzene, naphthalene, or anthracene, but the problem with such compounds is that they usually form infinite herringbone arrangements, which are far from what is indeed needed.
Nevertheless, such an excimer with a similar emission in solution and in the solid state is formed by the monosubstituted 2-(anthracen-9-yl)thianthrene (2-TA-AN) 49 presented by the group of Gao et al. [109,110] (Figure 47). The resulting dimer 50 is formed via antiparallel face-to-face stacking, and the discrete dimeric structure is established thanks to the thianthrene substituent, which spatially separates anthracene dimers from each other, thus preventing further aggregation. As shown in Figure 47, the resulting dimer emits in the green region (λmax = 526 nm) versus the monomer, which displays blue emission (λmax = 424 nm) in diluted solution.
A similar approach was followed up by Prasad et al. [111] in order to study the possible excimer formation and the photophysical properties in both solution (DCM) and The resulting dimer 50 is formed via antiparallel face-to-face stacking, and the discrete dimeric structure is established thanks to the thianthrene substituent, which spatially separates anthracene dimers from each other, thus preventing further aggregation. As shown in Figure 47, the resulting dimer emits in the green region (λ max = 526 nm) versus the monomer, which displays blue emission (λ max = 424 nm) in diluted solution.
A similar approach was followed up by Prasad et al. [111] in order to study the possible excimer formation and the photophysical properties in both solution (DCM) and solidstate thin films. For that purpose, they synthesized different anthracene derivatives functionalized with amino alkyl chains (51 octyl, 52 dodecyl, 53 octadecyl, and 54 p-butylaniline) ( Figure 48, Table 4).

Photochem 2023, 3, FOR PEER REVIEW
solid-state thin films. For that purpose, they synthesized different anthracene der functionalized with amino alkyl chains (51 octyl, 52 dodecyl, 53 octadecyl, and tylaniline) ( Figure 48, Table 4). Spectroscopic investigation showed excimer formation (Figure 49, right). H in solution, only fractions of the excimers were formed contrary to that of the sol where exclusively excimer formation was observed, which can be explained by rigid packing of anthracene moieties. In addition, glassy thin films were obtaine fast cooling to room temperature after heating the solid thin films, thus exhibiting crystalline phase. A closer look into the packing showed discotic (rectangular co arrangement (Figure 49, left).   Spectroscopic investigation showed excimer formation (Figure 49, right). However, in solution, only fractions of the excimers were formed contrary to that of the solid state, where exclusively excimer formation was observed, which can be explained by a close rigid packing of anthracene moieties. In addition, glassy thin films were obtained upon fast cooling to room temperature after heating the solid thin films, thus exhibiting a plastic crystalline phase. A closer look into the packing showed discotic (rectangular columnar) arrangement (Figure 49, left).
Spectroscopic investigation showed excimer formation (Figure 49, right). However, in solution, only fractions of the excimers were formed contrary to that of the solid state, where exclusively excimer formation was observed, which can be explained by a close rigid packing of anthracene moieties. In addition, glassy thin films were obtained upon fast cooling to room temperature after heating the solid thin films, thus exhibiting a plastic crystalline phase. A closer look into the packing showed discotic (rectangular columnar) arrangement (Figure 49, left). Nevertheless, comparing the photophysical properties of the different anthracene derivatives used revealed slight differences due to the different length of the alkyl chain substituents.  Nevertheless, comparing the photophysical properties of the different anthracene derivatives used revealed slight differences due to the different length of the alkyl chain substituents.
In 2014, Feng et al. [112] reported on anthracene-based excimer emission with sensing properties for pyrophosphates (PPi). The resulting excimer after complexation of PPi with zinc-based anthracene complex led to a red-shifted emission, indicating its presence (Scheme 9).

Photochem 2023, 3, FOR PEER REVIEW
In 2014, Feng et al. [112] reported on anthracene-based excimer emission with properties for pyrophosphates (PPi). The resulting excimer after complexation of zinc-based anthracene complex led to a red-shifted emission, indicating its (Scheme 9). Scheme 9. Complex of ZnL1 and PPi sensing. Reprinted with permission from Ref. [112]. right 2020, American Chemical Society.
The monomer itself, when exposed to 380 nm, emitted in the blue region ( whereas addition of PPi led to the formation of excimer, which, under the same ir wavelength, emitted at 480 nm in the turquoise region ( Figure 50). Scheme 9. Complex of ZnL1 and PPi sensing. Reprinted with permission from Ref. [112]. Copyright 2020, American Chemical Society.
The monomer itself, when exposed to 380 nm, emitted in the blue region (420 nm), whereas addition of PPi led to the formation of excimer, which, under the same irradiation wavelength, emitted at 480 nm in the turquoise region ( Figure 50). Scheme 9. Complex of ZnL1 and PPi sensing. Reprinted with permission from Ref. [112]. C right 2020, American Chemical Society.
The monomer itself, when exposed to 380 nm, emitted in the blue region (4 whereas addition of PPi led to the formation of excimer, which, under the same irra wavelength, emitted at 480 nm in the turquoise region ( Figure 50).

Exciplexes
Exciplexes (excited complex) (MAMB)* are chemical species formed when one mer (MA) in the excited state forms a complex with another (different) monomer M ground state (Figure 51).

Exciplexes
Exciplexes (excited complex) (M A M B )* are chemical species formed when one monomer (M A ) in the excited state forms a complex with another (different) monomer M B in the ground state ( Figure 51). right 2020, American Chemical Society.
The monomer itself, when exposed to 380 nm, emitted in the blue region (4 whereas addition of PPi led to the formation of excimer, which, under the same irr wavelength, emitted at 480 nm in the turquoise region ( Figure 50).

Exciplexes
Exciplexes (excited complex) (MAMB)* are chemical species formed when on mer (MA) in the excited state forms a complex with another (different) monomer M ground state (Figure 51).  Ideally, exciplex formation requires the use of proper compounds where one of them is an electron donor (HTM-hole transporting material) and the other one an electron acceptor (ETM-electron transporting material) [112].
Exciplexes usually display a red-shifted structureless broad emission spectrum and, therefore, are used as emitters and considered as potential organic light-emitting diodes (OLED) due to their capability of host-guest energy transfer [114,115].
A typical example of an exciplex formation between simple anthracene 1 and dimethyl aniline 55 was observed by Geddes et al. [116] as they found an increase in fluorescence intensity of an unstructured band at 500 nm, while a decrease in intensity of the well-resolved vibrionic structure of the pure anthracene emission was observed ( Figure 52). The formation of a charge transfer complex during the irradiation of anthracene diethylaniline mixture was identified to be responsible for exciplex emission.

3, FOR PEER REVIEW 31
Ideally, exciplex formation requires the use of proper compounds where one of them is an electron donor (HTM-hole transporting material) and the other one an electron acceptor (ETM-electron transporting material) [112].
Exciplexes usually display a red-shifted structureless broad emission spectrum and, therefore, are used as emitters and considered as potential organic light-emitting diodes (OLED) due to their capability of host-guest energy transfer [114,115].
A typical example of an exciplex formation between simple anthracene 1 and dimethyl aniline 55 was observed by Geddes et al. [116] as they found an increase in fluorescence intensity of an unstructured band at 500 nm, while a decrease in intensity of the well-resolved vibrionic structure of the pure anthracene emission was observed ( Figure  52). The formation of a charge transfer complex during the irradiation of anthracene diethylaniline mixture was identified to be responsible for exciplex emission. Another example of exciplex formation with a broad, structureless, and red-shifted emission compared with the anthracene derivative alone was observed by the group of Chen at al. [117] when exposing a solid thin film of a mixture of anthracene derivative 56 with an amino compound 57 at 50%wt to UV light.
Emission of pure anthracene derivative monomer at λmax = 449 nm was red-shifted to Another example of exciplex formation with a broad, structureless, and red-shifted emission compared with the anthracene derivative alone was observed by the group of Chen at al. [117] when exposing a solid thin film of a mixture of anthracene derivative 56 with an amino compound 57 at 50%wt to UV light.
Another example of exciplex formation with a broad, structureless, and red-shifted emission compared with the anthracene derivative alone was observed by the group of Chen at al. [117] when exposing a solid thin film of a mixture of anthracene derivative 56 with an amino compound 57 at 50%wt to UV light.
Emission of pure anthracene derivative monomer at λmax = 449 nm was red-shifted to λmax = 482 nm for the mixture with 57 (TAPC = Di-{4-N,N-ditolyl-aminophenyl}cyclohexane) thin films, indicating the formation of the exciplex (Figure 53). Compounds already known to form exciplexes with anthracene and its derivatives are, e.g., oxygen [118], dienes [119], and amines [120,121]. In 1975, Yang et al. [122] used dimethylaniline (DMA) in order to investigate the photochemistry of anthracene. They found out that in the absence of DMA, the only reaction was the photodimerization of Compounds already known to form exciplexes with anthracene and its derivatives are, e.g., oxygen [118], dienes [119], and amines [120,121]. In 1975, Yang et al. [122] used dimethylaniline (DMA) in order to investigate the photochemistry of anthracene. They found out that in the absence of DMA, the only reaction was the photodimerization of anthracene 9, whereas in the presence of DMA, competing reactions were occurring, leading to the formation of different products (58, 59, 60) depending on the concentration of the DMA (Figure 54).  These competing reactions were mainly attributed to electron transfer from the amine to the exited state of anthracene, and the intermediate was the exciplex formed in the excided state between these two compounds [122,123]. In addition to their interesting properties in photoluminescence, exciplexes are known as well to be the "obligatory" [124] intermediate of a photochemical reaction like in the [2 + 2] cycloaddition of 9-cyanophenanthrene 61 with -methylstyrene 62 (Scheme 10).

Dyad Emission
Systems/materials composed of two distinct covalently bound organic/inorganic compounds are known as dyads [125]. Such systems have been intensively investigated [126] by many research groups for possible applications [127,128]. Ge at al. [129] synthe- These competing reactions were mainly attributed to electron transfer from the amine to the exited state of anthracene, and the intermediate was the exciplex formed in the excided state between these two compounds [122,123]. In addition to their interesting properties in photoluminescence, exciplexes are known as well to be the "obligatory" [124] intermediate of a photochemical reaction like in the [2 + 2] cycloaddition of 9cyanophenanthrene 61 with β-methylstyrene 62 (Scheme 10).  These competing reactions were mainly attributed to electron transfer from the amine to the exited state of anthracene, and the intermediate was the exciplex formed in the excided state between these two compounds [122,123]. In addition to their interesting properties in photoluminescence, exciplexes are known as well to be the "obligatory" [124] intermediate of a photochemical reaction like in the [2 + 2] cycloaddition of 9-cyanophenanthrene 61 with -methylstyrene 62 (Scheme 10).

Dyad Emission
Systems/materials composed of two distinct covalently bound organic/inorganic compounds are known as dyads [125]. Such systems have been intensively investigated [126] by many research groups for possible applications [127,128]. Ge at al. [129] synthesized the anthracene-appended ferrocene dyad 64 containing the aniline and thiourea donor moieties for sensing Cu(II) and Hg(II) ions ( Figure 55). Dyad 64 exhibited a very weak emission at λ max = 395, 416, and 440 nm, respectively. The weakness of emission is attributed to photoinduced electron transfer (PET) from aniline and ferrocene as electron-rich species, quenching the fluorescence of the linked anthracene. However, the addition of metal ions such as Cu (II) and Hg (II) led to the increase in the emission, indicating that the nitrogen atom of aniline and the sulfur atom in thiourea are the binding sites for the metal ion coordination in 65 ( Figure 55).

Dyad Emission
Systems/materials composed of two distinct covalently bound organic/inorganic compounds are known as dyads [125]. Such systems have been intensively investigated [126] by many research groups for possible applications [127,128]. Ge at al. [129] synthesized the anthracene-appended ferrocene dyad 64 containing the aniline and thiourea donor moieties for sensing Cu(II) and Hg(II) ions ( Figure 55). Dyad 64 exhibited a very weak emission at λmax = 395, 416, and 440 nm, respectively. The weakness of emission is attributed to photoinduced electron transfer (PET) from aniline and ferrocene as electronrich species, quenching the fluorescence of the linked anthracene. However, the addition of metal ions such as Cu (II) and Hg (II) led to the increase in the emission, indicating that the nitrogen atom of aniline and the sulfur atom in thiourea are the binding sites for the metal ion coordination in 65 ( Figure 55).  Further, an anthracene-based dyad was published by Tykwinski et al. [130], this time combined with a pentacene unit 66. The anthracene core was modified at position 9 with different substituents, e.g., H, F, Cl, Br, and CH 3 ( Figure 56).

Photochem 2023, 3, FOR PEER REVIEW 33
Further, an anthracene-based dyad was published by Tykwinski et al. [130], this time combined with a pentacene unit 66. The anthracene core was modified at position 9 with different substituents, e.g., H, F, Cl, Br, and CH3 ( Figure 56). The resulting dyad derivatives showed very similar photophysical properties ( Figure  56, right), which could be best explained by the X-ray structures [131] (Figure 57), which were similar regardless of the presence of different substituents on the anthracene. A characteristic absorption band for the pentacene unit was observed at λmax = 310 nm and in the low-energy region at λ = 536, 537, 623 nm, whereas the main absorption band for the anthracene core was observed at λmax = 256 nm, including a series of week absorptions at λ = 349, 367, and 387 nm. The resulting dyad derivatives showed very similar photophysical properties ( Figure 56, right), which could be best explained by the X-ray structures [131] (Figure 57), which were similar regardless of the presence of different substituents on the anthracene. A characteristic absorption band for the pentacene unit was observed at λ max = 310 nm and in the low-energy region at λ = 536, 537, 623 nm, whereas the main absorption band for the anthracene core was observed at λ max = 256 nm, including a series of week absorptions at λ = 349, 367, and 387 nm.
In 2019, the group of Chaari et al. [132] synthesized such dyads for very efficient blue light emission, using a nucleophilic substitution reaction between an anthracene moiety and an m-carborane cluster (Scheme 11).
Dyads 71, 72, and 73 show similar well-structured absorption spectra largely attributed to π-π* transitions of the anthracene compound. In addition, these dyads display excellent emission properties showing almost quantitative (95-100%) fluorescence quantum yields in solution for all of them, which is significantly higher than the one containing two anthracene moieties [133]. The high efficiency emission is attributed to the presence of the CH 2 linker, which allows a free rotation of the anthracene core (Figure 58a). Figure 56. Structure (left), UV-VIS absorption spectra of 66a-d (measured in CH2 region of 225-800 nm and expansion from 340-700 nm (right). Reprinted with permission from Ref. [130]. Copyright 2020, Wiley-VCH Verlag GmbH & Co.
The resulting dyad derivatives showed very similar photophysical properties ( Figure  56, right), which could be best explained by the X-ray structures [131] (Figure 57), which were similar regardless of the presence of different substituents on the anthracene. A characteristic absorption band for the pentacene unit was observed at λmax = 310 nm and in the low-energy region at λ = 536, 537, 623 nm, whereas the main absorption band for the anthracene core was observed at λmax = 256 nm, including a series of week absorptions at λ = 349, 367, and 387 nm. In 2019, the group of Chaari et al. [132] synthesized such dyads for very efficient blue light emission, using a nucleophilic substitution reaction between an anthracene moiety and an m-carborane cluster (Scheme 11). Dyads 71, 72, and 73 show similar well-structured absorption spectra largely attributed to π-π* transitions of the anthracene compound. In addition, these dyads display excellent emission properties showing almost quantitative (95-100%) fluorescence quantum yields in solution for all of them, which is significantly higher than the one containing two anthracene moieties [133]. The high efficiency emission is attributed to the presence of the CH2 linker, which allows a free rotation of the anthracene core (Figure 58a). Dyads 71, 72, and 73 show similar well-structured absorption spectra largely attributed to π-π* transitions of the anthracene compound. In addition, these dyads display excellent emission properties showing almost quantitative (95-100%) fluorescence quantum yields in solution for all of them, which is significantly higher than the one containing two anthracene moieties [133]. The high efficiency emission is attributed to the presence of the CH2 linker, which allows a free rotation of the anthracene core (Figure 58a). Furthermore, these dyads retained their emission properties in the aggregated state as well (Figure 58b), again thanks to the presence of CH2 in 71 and iodine in 72 and 73, which prevents π-π stacking due to steric hindrance ( Figure 59). Furthermore, these dyads retained their emission properties in the aggregated state as well (Figure 58b), again thanks to the presence of CH 2 in 71 and iodine in 72 and 73, which prevents π-π stacking due to steric hindrance ( Figure 59). Crystal structures of compounds 71, 72, and 73 were formed to be mainly controlled by the intermolecular interaction between C-H and B-H of carbaborane with anthracene moiety. In addition, compound 71 showed further interaction between hydrogen atoms of -CH2-groups and anthracene, whereas compound 72 featured further C-H-π interactions ( Figure 59).
Thus, intermolecular π-π interactions between the anthracene building blocks were prevented mostly by the interaction of hydrogen atom from the carbaborane cluster and anthracene (Cc-H-A) among weak B-H-I-B interaction. Due to these interesting photophysical properties, these compounds have potential for bioimaging applications.

Triade Emission
Systems/materials composed of three distinct organic/inorganic (usually π-conjugated organic) compounds are known as triads. Such systems can be used to develop heavy atom-free-triplet photosensitizers [134]. A typical example is given in the work conducted by Xing et al., who synthesized two (74,75) slightly different triads composed of carbazole (CZ), anthracene (AN), and bodipy (BDP) (Figure 60). Crystal structures of compounds 71, 72, and 73 were formed to be mainly controlled by the intermolecular interaction between C-H and B-H of carbaborane with anthracene moiety. In addition, compound 71 showed further interaction between hydrogen atoms of -CH 2 -groups and anthracene, whereas compound 72 featured further C-H-π interactions ( Figure 59).
Thus, intermolecular π-π interactions between the anthracene building blocks were prevented mostly by the interaction of hydrogen atom from the carbaborane cluster and anthracene (Cc-H-A) among weak B-H-I-B interaction. Due to these interesting photophysical properties, these compounds have potential for bioimaging applications.

Triade Emission
Systems/materials composed of three distinct organic/inorganic (usually π-conjugated organic) compounds are known as triads. Such systems can be used to develop heavy atom-free-triplet photosensitizers [134]. A typical example is given in the work conducted by Xing et al., who synthesized two (74,75) slightly different triads composed of carbazole (CZ), anthracene (AN), and bodipy (BDP) (Figure 60).
These triads were composed of two donors (CZ and AN) and one acceptor (BDP) organic moieties and linked together in such a way that a sequential electron transfer was possible. Furthermore, in order to study the photophysical properties especially on spinorbit charge transfer intersystem crossing (SOC-ISC), the position and distance of the carbazole moiety was varied because it is known that substrate modification, e.g., substitution, influences their performances. [135] Such triads were used as triplet photosensitizers for triplet-triplet annihilation (TTA) upconversion (Figure 60, right). The mechanism for triplet-triplet annihilation (TTA) involves an energy transfer between two molecules al-ready in the triplet excited state. This process would allow one molecule to go back to the ground state and the other one to be promoted to higher energy levels [136]. These triads were composed of two donors (CZ and AN) and one acceptor (BDP) organic moieties and linked together in such a way that a sequential electron transfer was possible. Furthermore, in order to study the photophysical properties especially on spinorbit charge transfer intersystem crossing (SOC-ISC), the position and distance of the carbazole moiety was varied because it is known that substrate modification, e.g., substitution, influences their performances. [135] Such triads were used as triplet photosensitizers for triplet-triplet annihilation (TTA) upconversion (Figure 60, right). The mechanism for triplet-triplet annihilation (TTA) involves an energy transfer between two molecules already in the triplet excited state. This process would allow one molecule to go back to the ground state and the other one to be promoted to higher energy levels [136].
The reactions of proton-coupled electron transfer (PCET) were studied by Hammer-Schiffer et al. [135] using a triad [137] molecule 76 composed of anthracene, phenol, and pyridine building blocks. Using different substituents, they studied first their effect on the decay of a locally excited state (LES) to the ground state (GS) and, second, explained the long-lived charge separation state (CSS) (Figure 61). LEPT stands for local electron-proton transfer. Figure 61. Triads and their chemical structure (left), concerted electron transfer from phenol to anthracene and proton transfer from phenol to pyridine (right). Adapted with permission from Ref. [137]. Copyright 2019, The American Association for the Advancement of Science.

Coordination Polymers (CPs)
Coordination polymers (CPs) are supramolecular assemblies [138] formed typically between an organic compound (ligand, electron donor) and an inorganic salt [139] (metal ion, electron acceptor) through noncovalent bonding [140]. CPs and their properties among other factors (e.g., solvents, temperature) are dependent on the nature of the donor and acceptor species, which can lead to the formation of 1D [23,141], 2D [23], and 3D [142] structures showing different chemical, physical, and photophysical properties. Since their introduction, such CPs, especially those based on fluorescent building blocks, have found The reactions of proton-coupled electron transfer (PCET) were studied by Hammer-Schiffer et al. [135] using a triad [137] molecule 76 composed of anthracene, phenol, and pyridine building blocks. Using different substituents, they studied first their effect on the decay of a locally excited state (LES) to the ground state (GS) and, second, explained the long-lived charge separation state (CSS) (Figure 61). LEPT stands for local electron-proton transfer. These triads were composed of two donors (CZ and AN) and one acceptor (BDP) organic moieties and linked together in such a way that a sequential electron transfer was possible. Furthermore, in order to study the photophysical properties especially on spinorbit charge transfer intersystem crossing (SOC-ISC), the position and distance of the carbazole moiety was varied because it is known that substrate modification, e.g., substitution, influences their performances. [135] Such triads were used as triplet photosensitizers for triplet-triplet annihilation (TTA) upconversion ( Figure 60, right). The mechanism for triplet-triplet annihilation (TTA) involves an energy transfer between two molecules already in the triplet excited state. This process would allow one molecule to go back to the ground state and the other one to be promoted to higher energy levels [136].
The reactions of proton-coupled electron transfer (PCET) were studied by Hammer-Schiffer et al. [135] using a triad [137] molecule 76 composed of anthracene, phenol, and pyridine building blocks. Using different substituents, they studied first their effect on the decay of a locally excited state (LES) to the ground state (GS) and, second, explained the long-lived charge separation state (CSS) (Figure 61). LEPT stands for local electron-proton transfer. Figure 61. Triads and their chemical structure (left), concerted electron transfer from phenol to anthracene and proton transfer from phenol to pyridine (right). Adapted with permission from Ref. [137]. Copyright 2019, The American Association for the Advancement of Science.

Coordination Polymers (CPs)
Coordination polymers (CPs) are supramolecular assemblies [138] formed typically between an organic compound (ligand, electron donor) and an inorganic salt [139] (metal ion, electron acceptor) through noncovalent bonding [140]. CPs and their properties among other factors (e.g., solvents, temperature) are dependent on the nature of the donor and acceptor species, which can lead to the formation of 1D [23,141], 2D [23], and 3D [142] structures showing different chemical, physical, and photophysical properties. Since their introduction, such CPs, especially those based on fluorescent building blocks, have found Figure 61. Triads and their chemical structure (left), concerted electron transfer from phenol to anthracene and proton transfer from phenol to pyridine (right). Adapted with permission from Ref. [137]. Copyright 2019, The American Association for the Advancement of Science.

Coordination Polymers (CPs)
Coordination polymers (CPs) are supramolecular assemblies [138] formed typically between an organic compound (ligand, electron donor) and an inorganic salt [139] (metal ion, electron acceptor) through noncovalent bonding [140]. CPs and their properties among other factors (e.g., solvents, temperature) are dependent on the nature of the donor and acceptor species, which can lead to the formation of 1D [23,141], 2D [23], and 3D [142] structures showing different chemical, physical, and photophysical properties. Since their introduction, such CPs, especially those based on fluorescent building blocks, have found many applications, thanks to their capability of hosting guest molecules [143] and sensing traces of toxic [19][20][21] or explosive compounds [24,144], ions [106,145], and in light-emitting diodes (LED) [13].
In 2018, one such functional coordination polymer was published by Fromm at al. [26] using the 9,10-di(1H-imidazol-1-yl)anthracene ligand 80 in coordination with Zn II and Cd II . Due to the possible conjugation of the nitrogen lone pair in the imidazole moiety, which leads to the partial formation of the double bond, the molecule is not completely flexible. Nevertheless, rotation is still possible but quite slow, allowing for of two conformers to form, cis and trans (Scheme 12).
In 2018, one such functional coordination polymer was published by Fromm at al [26] using the 9,10-di(1H-imidazol-1-yl)anthracene ligand 80 in coordination with Zn II and Cd II . Due to the possible conjugation of the nitrogen lone pair in the imidazole moiety which leads to the partial formation of the double bond, the molecule is not completely flexible. Nevertheless, rotation is still possible but quite slow, allowing for of two con formers to form, cis and trans (Scheme 12). Scheme 12. Ligand L: 9,10-di(1-H-imidazol-1-yl)-anthracene and its cis-and trans-conformations in coordination polymers.
Interestingly even though the molar ratio of the ligand to the metal salt used in th reaction was always 1:1, the resulting coordination polymer featured a 2:1 ratio for ligand and metal. In addition, it has been found that by changing the polarity of the solvent mix ture, the ligand L can adopt either the cis-(polar solvent, e.g., MeOH/DCM (1/4)) or th trans-conformation (e.g., MeOH/DCM (4/1)), whereas in an intermediate solvent mixtur (e.g., MeOH/dioxane (1/4)), both forms are present. These possible modifications led to the synthesis of several different (1D, 2D, and 3D) coordination polymers (Figure 62), al showing a strong blue emission in the solid state at room temperature ( Figure 63). Interestingly even though the molar ratio of the ligand to the metal salt used in the reaction was always 1:1, the resulting coordination polymer featured a 2:1 ratio for ligand and metal. In addition, it has been found that by changing the polarity of the solvent mixture, the ligand L can adopt either the cis-(polar solvent, e.g., MeOH/DCM (1/4)) or the trans-conformation (e.g., MeOH/DCM (4/1)), whereas in an intermediate solvent mixture (e.g., MeOH/dioxane (1/4)), both forms are present. These possible modifications led to the synthesis of several different (1D, 2D, and 3D) coordination polymers (Figure 62), all showing a strong blue emission in the solid state at room temperature ( Figure 63).
In 2019, the same group published a different (1D and 2D) coordination polymer based on pyridyl-substituted anthracene building blocks 81, simply by using different anions with either zinc or cadmium ions ( Figure 64).
The high sensing capability of such compounds for the above-mentioned nitro and herbicide compounds was possible due to the fluorescent emission of the compounds, which diminished in the presence of small quantities of the guest molecules. However, the mechanism on how the fluorescence emission is quenched is not well understood, but it is well known that these compounds are quite sensitive to the environment.
However, changing the ratio of the ligand to metal ion can also lead to different structures. For instance, in 2009, by using a 1:1 ratio of compound 81 ligand-to-metal ions, Khlobystov et al. synthesized 1D coordination polymer ( Figure 66) [141].
One year later, in 2010, Fromm et al. [106] synthesized nanowire upon the reaction of 82 with silver metal ions. The resulting CP with a zigzag 1D chain due to the coordination of nitrogen atom from the pyridyl group to the silver ion displayed excimer emission owing to the pairwise stacking of anthracene moieties ( Figure 67).
Hey-Hawkins et al. [146] confirmed that anthracene-based ligands are excellent candidates for the formation of CPs by using them for the detection of hydrogen peroxide (H 2 O 2 ). Usually, anthracene-based ligands are used thanks to their excellent luminescent properties, which, in combination with sophisticated fluorimetry techniques, allow the detection of different analytes at very low concentrations.
The detection of singlet oxygen ( 1 O 2 ) based on an anthracene coordination polymer is also reported [147]. The author took advantage of the flexible anthracene ligand 83 (Figure 68, left) to synthesis a one-dimensional zigzag coordination polymer (Figure 68, right).  In 2019, the same group published a different (1D and 2D) coordination polymer based on pyridyl-substituted anthracene building blocks 81, simply by using different anions with either zinc or cadmium ions ( Figure 64).
[Cd(oba)(L)0.5]  In 2019, the same group published a different (1D and 2D) coordination polyme based on pyridyl-substituted anthracene building blocks 81, simply by using different an ions with either zinc or cadmium ions ( Figure 64).
[Cd(oba)(L)0.5] The perchlorate (ClO4 − ) and hexafluoro silicon anion (SiF6 2− ) led to the formation o 2D structures, whereas tosylate (p-Tos − ), trifluoroacetate (CF3CO2 − ), and triflate (CF3SO3 − led to the formation of 1D coordination polymers. In both types, the ratio of ligand to  The high sensing capability of such compounds for the above-mentioned nitro and herbicide compounds was possible due to the fluorescent emission of the compounds, which diminished in the presence of small quantities of the guest molecules. However, the mechanism on how the fluorescence emission is quenched is not well understood, but it is well known that these compounds are quite sensitive to the environment.
However, changing the ratio of the ligand to metal ion can also lead to different structures.  The high sensing capability of such compounds for the above-mentioned nitro an herbicide compounds was possible due to the fluorescent emission of the compound which diminished in the presence of small quantities of the guest molecules. Howeve the mechanism on how the fluorescence emission is quenched is not well understood, bu it is well known that these compounds are quite sensitive to the environment.
However, changing the ratio of the ligand to metal ion can also lead to different struc tures. For instance, in 2009, by using a 1:1 ratio of compound 81 ligand-to-metal ion Khlobystov et al. synthesized 1D coordination polymer ( Figure 66) [141]. One year later, in 2010, Fromm et al. [106] synthesized nanowire upon the reaction o 82 with silver metal ions. The resulting CP with a zigzag 1D chain due to the coordinatio of nitrogen atom from the pyridyl group to the silver ion displayed excimer emission ow ing to the pairwise stacking of anthracene moieties (Figure 67).
Hey-Hawkins et al. [146] confirmed that anthracene-based ligands are excellent can didates for the formation of CPs by using them for the detection of hydrogen peroxid   Ligand 84 showed aggregation-induced emission (AIE) activity in ethanol/hexane medium. However, in the crystal structure of the CP, the same ligand adopted a different (twisted diacrylic) conformation. This change in the structure of ligand 83 led to a drastic change in the photophysical properties of CP (λmax = 500 nm), in comparison with the ligand alone (λmax = 580 nm) with a hypsochromic shift of 80 nm (Figure 69). The origin of this type of emission is attributed to the twisted diacrylic ligand conformation compared with the free ligand and to the rigidity in the resulting CP. In addition to it, the resulting coordination polymer showed an expressed fluorescence response toward singlet oxygen ( 1 O2) in a very selective manner (Figure 70) [148][149][150]. The mechanism of sensing, on the other hand, is also well known [58,64,151,152], as the singlet oxygen reacts with anthracene building in a [4 + 2] cycloaddition, leading to  Ligand 84 showed aggregation-induced emission (AIE) activity in ethanol/hexane medium. However, in the crystal structure of the CP, the same ligand adopted a different (twisted diacrylic) conformation. This change in the structure of ligand 83 led to a drastic change in the photophysical properties of CP (λmax = 500 nm), in comparison with the ligand alone (λmax = 580 nm) with a hypsochromic shift of 80 nm (Figure 69). The origin of this type of emission is attributed to the twisted diacrylic ligand conformation compared with the free ligand and to the rigidity in the resulting CP. In addition to it, the resulting coordination polymer showed an expressed fluorescence response toward singlet oxygen ( 1 O2) in a very selective manner (Figure 70) [148][149][150]. The mechanism of sensing, on the other hand, is also well known [58,64,151,152], as the singlet oxygen reacts with anthracene building in a [4 + 2] cycloaddition, leading to Figure 68. Chemical structure of 3,3 ′ -(anthracene-9,10-diyl) diacrylic acid 84 and its coordination environment around the Zn(II) ions (a-d). Color codes: Zn, green; N, blue; C, gray; H, cyan; O, red. [147]. Adapted with permission from Ref. [147]. Copyright 2017, American Chemistry Society.
Ligand 84 showed aggregation-induced emission (AIE) activity in ethanol/hexane medium. However, in the crystal structure of the CP, the same ligand adopted a different (twisted diacrylic) conformation. This change in the structure of ligand 83 led to a drastic change in the photophysical properties of CP (λ max = 500 nm), in comparison with the ligand alone (λ max = 580 nm) with a hypsochromic shift of 80 nm (Figure 69). The origin of this type of emission is attributed to the twisted diacrylic ligand conformation compared with the free ligand and to the rigidity in the resulting CP.  Ligand 84 showed aggregation-induced emission (AIE) activity in ethanol/hexane medium. However, in the crystal structure of the CP, the same ligand adopted a different (twisted diacrylic) conformation. This change in the structure of ligand 83 led to a drastic change in the photophysical properties of CP (λmax = 500 nm), in comparison with the ligand alone (λmax = 580 nm) with a hypsochromic shift of 80 nm (Figure 69). The origin of this type of emission is attributed to the twisted diacrylic ligand conformation compared with the free ligand and to the rigidity in the resulting CP. In addition to it, the resulting coordination polymer showed an expressed fluorescence response toward singlet oxygen ( 1 O2) in a very selective manner (Figure 70) [148][149][150]. The mechanism of sensing, on the other hand, is also well known [58,64,151,152], as the singlet oxygen reacts with anthracene building in a [4 + 2] cycloaddition, leading to In addition to it, the resulting coordination polymer showed an expressed fluorescence response toward singlet oxygen ( 1 O 2 ) in a very selective manner ( Figure 70) [148][149][150]. The mechanism of sensing, on the other hand, is also well known [58,64,151,152], as the singlet oxygen reacts with anthracene building in a [4 + 2] cycloaddition, leading to the formation of endoperoxides, which, due to the subsequent loss of aromaticity (conjugation), have low or no fluorescence at all. the formation of endoperoxides, which, due to the subsequent loss of aromaticity (conju gation), have low or no fluorescence at all. Besides simple coordination systems based on a single ligand, one can also use addi tional auxiliary ligands (e.g., L-84 (1,4-H2bdc) and L-85 (2,6-H2ndc)) for the construction of coordination polymers ( Figure 71).  These CPs in Figure 72 display strong luminescence emissions, which are stronge than the one of ligand 81 alone due to high-dimensional structures of the CPs and the rigidity enhancement of the ligand, thus minimizing the loss of energy through radiation less pathways ( Figure 73). Therefore, such compounds have the potential to be used in photoelectronic devices, such as LEDs. Besides simple coordination systems based on a single ligand, one can also use additional auxiliary ligands (e.g., L-84 (1,4-H 2 bdc) and L-85 (2,6-H 2 ndc)) for the construction of coordination polymers ( Figure 71) . Photochem 2023, 3, FOR PEER REVIEW 4 the formation of endoperoxides, which, due to the subsequent loss of aromaticity (conju gation), have low or no fluorescence at all. Besides simple coordination systems based on a single ligand, one can also use addi tional auxiliary ligands (e.g., L-84 (1,4-H2bdc) and L-85 (2,6-H2ndc)) for the construction of coordination polymers ( Figure 71).  These CPs in Figure 72 display strong luminescence emissions, which are stronge than the one of ligand 81 alone due to high-dimensional structures of the CPs and th rigidity enhancement of the ligand, thus minimizing the loss of energy through radiation less pathways ( Figure 73). Therefore, such compounds have the potential to be used in photoelectronic devices, such as LEDs.  Besides simple coordination systems based on a single ligand, one can also use additional auxiliary ligands (e.g., L-84 (1,4-H2bdc) and L-85 (2,6-H2ndc)) for the construction of coordination polymers ( Figure 71).  These CPs in Figure 72 display strong luminescence emissions, which are stronger than the one of ligand 81 alone due to high-dimensional structures of the CPs and the rigidity enhancement of the ligand, thus minimizing the loss of energy through radiationless pathways ( Figure 73). Therefore, such compounds have the potential to be used in photoelectronic devices, such as LEDs. These CPs in Figure 72 display strong luminescence emissions, which are stronger than the one of ligand 81 alone due to high-dimensional structures of the CPs and the rigidity enhancement of the ligand, thus minimizing the loss of energy through radiationless pathways ( Figure 73). Therefore, such compounds have the potential to be used in photoelectronic devices, such as LEDs. Photochem 2023, 3, FOR PEER REVIEW 43 Figure 73. The solid-state emission spectra of 81 and complexes at room temperature.

Conclusions
In summary, we have given an introduction about the photophysical properties of organic compounds with special emphasis on that of anthracene and its derivatives, as well as the interaction of light with matter, explaining in detail the Jablonski diagram. In addition, we have provided the reader with a brief introduction of the importance of the fluorescence/fluorimetry technique as a highly sensitive method for tracing toxic and explosive compounds, as well as for bioimaging in biology and medicine. Furthermore, different types of aggregates formed in both the ground and the excited state and their influence on the outcome of the emission light are discussed, and intermolecular energy/electron transfer in dyads and triads is briefly covered to give the readers a bit of a flavor of such compounds.

Conclusions
In summary, we have given an introduction about the photophysical properties of organic compounds with special emphasis on that of anthracene and its derivatives, as well as the interaction of light with matter, explaining in detail the Jablonski diagram. In addition, we have provided the reader with a brief introduction of the importance of the fluorescence/fluorimetry technique as a highly sensitive method for tracing toxic and explosive compounds, as well as for bioimaging in biology and medicine. Furthermore, different types of aggregates formed in both the ground and the excited state and their influence on the outcome of the emission light are discussed, and intermolecular energy/electron transfer in dyads and triads is briefly covered to give the readers a bit of a flavor of such compounds.