Added Complexity!—Mechanistic Aspects of Heterobimetallic Complexes for Application in Homogeneous Catalysis

Inspired by multimetallic assemblies and their role in enzyme catalysis, chemists have developed a plethora of heterobimetallic complexes for application in homogeneous catalysis. Starting with small heterobimetallic complexes with σ-donating and π-accepting ligands, such as N-heterocyclic carbene and carbonyl ligands, more and more complex systems have been developed over the past two decades. These systems can show a significant increase in catalytic activity compared with their monometallic counterparts. This increase can be attributed to new reaction pathways enabled by the presence of a second metal center in the active catalyst. This review focuses on mechanistic aspects of heterobimetallic complexes in homogeneous catalysis. Depending on the type of interaction of the second metal with the substrates, heterobimetallic complexes can be subdivided into four classes. Each of these classes is illustrated with multiple examples, showcasing the versatility of both, the types of interactions possible, and the reactions accessible.


Introduction: Multimetallic Catalysis: From Enzymes to Complexes
Humanity is currently facing two existential and inherently connected challenges: on the one hand, the ever-increasing demand for energy and, on the other hand, the consequences of anthropogenic greenhouse gas emissions [1]. In particular, the increased intensity of the global climate crisis shows the necessity to move away from energy sources based on the combustion of fixed carbon towards carbon-neutral production of fuels [2]. A particularly desirable goal is the direct reduction of carbon dioxide into an energy carrier [3,4]. Considering that energy demand, specifically the global consumption of energy per hour, is predicted to reach 1.1 × 10 21 J by 2050, of which only 20% could be derived from fossil fuel resources, the need to gain access to new sources of energy is underpinned even more [5,6].
The reduction of carbon dioxide can be thermodynamically unfavorable, depending on the level of reduction, but is always associated with a high kinetic barrier; thus, the use of a catalyst is quintessential [4,[7][8][9]. While there are industrial processes that use catalysts for carbon dioxide reduction, to a certain level of success, both their scale and efficiency pale in comparison to biological carbon dioxide fixation (the transformation of gaseous carbon dioxide into higher energy compounds, such as formic acid, methanol, or glucose) [3,10]. The most notable example is photosynthesis, which is arguably the only catalytic process for carbonaceous fuel production on a global scale [11]. The autotrophic organisms performing the reduction of carbon dioxide have developed multiple different pathways to do so. Currently, six conceptually different autotrophic CO 2 metabolizing pathways are known; the most important of these is the Calvin cycle found in all plants, algae, and cyanobacteria [10,11]. It accounts for~90% of the biological carbon fixation worldwide, and the key enzyme ribulose-1,5-bisphosphate carboxylase-oxygenase (Ru-BisCO) is the most abundant protein on earth [12]. Scheme 1. Schematic reduction of CO2 to CO during the Wood-Ljungdahl pathway and sub incorporation into coenzyme A (CoA-SH), together with Co-containing methyl transferring (Co III -CH3) to form acetyl-coenzyme A (acetyl-CoA) [16].
The active site of [Ni] CODH contains a unique cluster, called the C-clus structure derives from a [4Fe4S] cluster with a nickel replacing one of the iron ato an additional iron pendant to the cluster. All the metal atoms in the cluster are lig cysteine and a cluster sulfide, while the pendant iron is ligated by a histidine, a c and a hydroxyl ligand [17]. Four different states of the C-cluster hav spectroscopically identified [18]. Of these four states, two are believed to be th states for the oxidation of CO to CO2. Through kinetic, spectroscopic, and str studies, the following catalytic cycle for CO2 reduction by [Ni] CODH (Schem proposed [17,[19][20][21]. A two-electron process (A) likely occurs via an ECE mec First, an electron transfer to form Ni I (E), followed by a chemical step (C), binding o Ni, and then a second electron transfer step (E). Alternative pathways may be p resulting in a CO2 adduct stabilized by hydrogen bonding with a protonated h residue. One of the oxygen atoms of CO2 then coordinates at the pendant iron, w associated with the loss of a water molecule from the iron center (B). The ad stabilized by a hydrogen bond with a protonated lysine moiety. Cleavage of the C-O bond (C) results in a Ni II CO species, which loses CO (D) to regenerate [Ni] COD complete the catalytic cycle. Scheme 1. Schematic reduction of CO 2 to CO during the Wood-Ljungdahl pathway and subsequent incorporation into coenzyme A (CoA-SH), together with Co-containing methyl transferring enzyme (Co III -CH 3 ) to form acetyl-coenzyme A (acetyl-CoA) [16].
It is apparent from the catalytic cycle presented in Scheme 2 that the interaction between the two metals, Ni and Fe, is detrimental to the overall activity of the enzyme. The pendant iron is in relatively close spatial proximity (2.7 Å) to the coordinatively unsaturated Ni species [22]. This motif of cooperative catalysis is not unique to [Ni] CODH but can rather be found in multiple different enzymes catalyzing reactions with small molecules such as H2, N2, O2, or CO [7]. A few notable examples of such multimetallic metalloenzymes, including the reaction each enzyme catalyzes, are shown in Figure 1 [23,24]. Figure 1. Selected multimetallic enzymes with the respective reaction they catalyze [25][26][27][28][29][30][31][32][33].
Independently, with the growing understanding of intermetallic interactions and their role in enzyme catalysis, conceptually similar activation modes have been utilized in heterogeneous catalysis, usually referred to as promoter-modified metallic surfaces. In these catalytic systems, small molecules are activated by multiple metal centers through cooperative mechanisms, thus enabling processes such as steam reforming, ammonia synthesis, and catalytic converters [34][35][36][37].
Independently, with the growing understanding of intermetallic interactions and their role in enzyme catalysis, conceptually similar activation modes have been utilized in heterogeneous catalysis, usually referred to as promoter-modified metallic surfaces. In these catalytic systems, small molecules are activated by multiple metal centers through cooperative mechanisms, thus enabling processes such as steam reforming, ammonia synthesis, and catalytic converters [34][35][36][37].
However, in synthetic homogeneous catalysis, the main paradigm was the development of single-site catalysts. To avoid the formation of multimetallic assemblies elaborate ligand scaffolds were designed, synthesized, and used with great success [38] Forming bi-or polynuclear complexes was even described as a possible deactivation pathway [39,40]. The field of homogeneous multimetallic catalysis has its origins in the works of Muetterties and his concept of cluster surface analogy [41][42][43]. Here, the properties of metallic surfaces were mimicked by low-valent, often late-transition meta cluster compounds, many of which used simple ligands such as carbonyl, hydride, or phosphine ligands (Figure 2, left) [43][44][45][46][47]. More recently, σ-donating and π-accepting ligands have been employed to form various heterometallic complexes for small molecule activation [48][49][50][51][52][53]. One example is Mankad's bimetallic catalytically active complex Figure 2, right) [54]. However, all these complexes use ligand systems developed for, or commonly employed in, mononuclear transition metal chemistry. Motivated by the great success of targeted ligand design, specific scaffolds have been developed to not only control the stereoelectronic environment of the metal centers but also allow specific interactions between them and thus enable new reactivities or activation modes of smal molecules [55][56][57][58][59][60].  [45]. (Right [CuFe] heterobimetallic complex, utilizing σ-donating and π-accepting ligands [54].
Considering that the distinction between a cluster, a multimetallic assembly, and a polymetallic complex can be difficult and that the combinatorial possibilities between metals are virtually endless, the focus of this article is on heterobimetallic complexes with well-defined ligand scaffolds.

Heterobimetallic Complexes in Homogeneous Catalysis
Introducing a second metal into a well-defined transition metal complex has two main advantages from a catalytic point of view. First, it allows for an additional parameter with which to influence the overall reactivity of the system. Second, it allows new reaction pathways that are inaccessible to single-site catalysts [58]. In the following text, these  12 ] 2+ as an example of an early heterobimetallic cluster [45]. (Right) [CuFe] heterobimetallic complex, utilizing σ-donating and π-accepting ligands [54].
Considering that the distinction between a cluster, a multimetallic assembly, and a polymetallic complex can be difficult and that the combinatorial possibilities between metals are virtually endless, the focus of this article is on heterobimetallic complexes with well-defined ligand scaffolds.

Heterobimetallic Complexes in Homogeneous Catalysis
Introducing a second metal into a well-defined transition metal complex has two main advantages from a catalytic point of view. First, it allows for an additional parameter with which to influence the overall reactivity of the system. Second, it allows new reaction pathways that are inaccessible to single-site catalysts [58]. In the following text, these unique reaction pathways and catalytic mechanisms will be presented. The focus will be on the catalytic application of heterobimetallic complexes and the opportunities they offer. Stoichiometric reactions, preparatory aspects, and structural features of heterobimetallic complexes will not be the main aspects. Furthermore, as this is an underdeveloped field with a non-standardized nomenclature, both for the complexes themselves and the types of mechanisms, this article, while thorough, is not comprehensive.
Heterobimetallic catalysts can be classified according to their interaction with the substrate or substrates. This mode of classification was first proposed by Page, Walker, and Messerle and later picked up and specified by Mankad and Tomson et al. [59,61]. In the following, a slight variation of these classification systems will be proposed and used throughout this work [55].
In general, there are two classes of heterobimetallic catalysts ( Figure 3). Class 1 systems have one metal M a , performing substrate activations and transformations, with the second metal M b playing an auxiliary role. Within class 1 systems, two types of auxiliary interactions are possible [61].
Class 1a (Figure 3, top left): All transformations of the substrate(s) are performed by M a . The second metal M b has an electronic interaction with the active metal M a . This stereoelectronic influence could either be via a direct metal-metal bond or through a shared ligand group. This is the most commonly employed strategy in heterobimetallic catalysis [53,62,63].
Class 1b (Figure 3, bottom left): All transformations of the substrate(s) are performed by M a . The second metal M b directs the substrates into an advantageous alignment but does not participate directly in the bond formation/breaking process [64]. This strategy is most common in asymmetric heterobimetallic catalysis, significantly increasing the selectivity [60,65].
In class 2 systems (Figure 3) on the other hand, both metals M a and M b interact with the substrate(s) and participate in the bond-breaking and bond-formation process. Depending on when and how they participate in the reaction, they can be subdivided into two further categories.
Class 2a (Figure 3, top right): Each metal performs a separate transformation on the substrate, usually in a subsequential or tandem fashion. M a can transform substrate X into Y, which is then the substrate for a different reaction to Z catalyzed by M b . This type of cooperative interaction has received increasing attention in the past few years [57,66].
Class 2b (Figure 3, bottom right): Both metals M a and M b participate in the bondbreaking and bond-formation processes of one single reaction. This could be achieved through the simultaneous activation of one substrate by both metals, thus lowering the activation barrier of one elemental step even further. Alternatively, substrate X is activated by M a while substrate Y is activated by M b , resulting in a double activation process. Both will be referred to as synergistic catalysis or activation throughout this work. A synergistic mechanism is the least utilized of the four possible heterobimetallic mechanisms [67,68].  All these interactions depend on the spatial proximity of the two metals. A intermetallic distance of 3.5 to 6 Å is considered ideal [69]. Heterobimetallic mechanism are also not mutually exclusive. Particularly, electronic interactions are very common eve in systems where the overall reactivity is dictated by tandem catalysis. Due to a very sho intermetallic distance and/or shared conjugated ligand systems, Mb can influence th  All these interactions depend on the spatial proximity of the two metals. An intermetallic distance of 3.5 to 6 Å is considered ideal [69]. Heterobimetallic mechanisms are also not mutually exclusive. Particularly, electronic interactions are very common even in systems where the overall reactivity is dictated by tandem catalysis. Due to a very short intermetallic distance and/or shared conjugated ligand systems, M b can influence the stereoelectronic properties of M a , increasing its activity. It is further necessary to point out that there are many heterobimetallic catalysts for which the mechanisms are not well understood, or it is not even clear if the active species is truly a heterobimetallic complex, further complicating classification. In the following sections, each of these four classes will be elucidated with a few selected examples of heterobimetallic catalysts for which the mechanism has been expounded. While most of these systems are well studied, the homogeneity of the reaction has not been assessed for every single example presented. However, considering the in-depth mechanistic investigation conducted for almost all of the presented examples, the formation of cluster compounds or nanoparticles should have been detected.

Electronic Interaction between M a and M b
In 1964, Cotton described the first metal-metal multiple bond, sparking vibrant and active research in the field [70]. Inspired by the possibilities that metal-metal bonds offer in terms of new reactivities, a plethora of compounds has been synthesized and studied [71,72]. Of particular interest in this work are catalytically active heterobimetallic compounds.
A prominent example of novel reactivities and reaction mechanisms enabled by heterobimetallic complexes was reported by Thomas et al. [73,74]. Complex  [75]. Interestingly, the Co center undergoes in-situ reduction from Co II to Co I in complex [Zr IV ;Co I ] [73]. This reduction does not occur when CoI 2 is reacted directly with three equivalents of the phosphinoamine Ph 2 PNH( i Pr), indicating a reduction-aiding behavior of the Zr IV center in this reaction. It is proposed that one iodide ion acts as a reductant, assisted by the Lewis acidic Zr IV center in proximity to the Co ion. The resulting [Zr IV ;Co I ] complexes have Zr-Co distances from 2.628 to 2.731 Å confirmed by X-ray crystallography, showing a Co→Zr interaction. The presence of an interaction was also supported by cyclic voltammetry, where all three compounds (shown in Scheme 3) had comparatively low reduction potentials (−1.65 V to −2.05 V vs. FcH/FcH + ) due to the electron density withdrawn from Co by Zr [73]. More interesting than the unusual metal-metal bond is the catalytic activity of [Zr IV ;Co I ] towards Kumada cross-coupling reactions (Scheme 4) [74]. Palladium-catalyzed cross-coupling reactions of aryl and vinyl halides are ubiquitous methods in preparative organic chemistry, but cross-coupling reactions between two alkyl compounds remain challenging up to this day [76]. Particularly Co-based complexes have emerged as promising catalysts for Kumada cross-coupling reactions between Grignard reagents (R′MgCl or R'MgBr; R′ = alkyl, aryl) and alkyl halides, but are not able to employ more readily available alkyl chlorides [77][78][79]. Palladium-catalyzed cross-coupling reactions of aryl and vinyl halides are ubiquitous methods in preparative organic chemistry, but cross-coupling reactions between two alkyl compounds remain challenging up to this day [76]. Particularly Co-based complexes have emerged as promising catalysts for Kumada cross-coupling reactions between Grignard reagents (R MgCl or R'MgBr; R = alkyl, aryl) and alkyl halides, but are not able to employ more readily available alkyl chlorides [77][78][79]. Palladium-catalyzed cross-coupling reactions of aryl and vinyl halides are ubiquitous methods in preparative organic chemistry, but cross-coupling reactions between two alky compounds remain challenging up to this day [76]. Particularly Co-based complexes have emerged as promising catalysts for Kumada cross-coupling reactions between Grignard reagents (R′MgCl or R'MgBr; R′ = alkyl, aryl) and alkyl halides, but are not able to employ more readily available alkyl chlorides [77][78][79]. As for the mechanism of the reaction, the precatalyst [Zr IV ;Co I ] is first reduced to the catalytically active species [Zr IV ;Co −I ] via a reaction with two equivalents of R'MgX (Scheme 5, A). The active catalyst can also be obtained by direct reduction of [Zr IV ;Co I with sodium amalgam (Scheme 3). X-ray crystallographic characterization of the active catalyst [Zr IV ;Co −I ] revealed a very short Co-Zr distance of 2.4112(3) Å and thus an even stronger interaction between the two metals compared with [Zr IV ;Co I ]. Furthermore density functional theory (DFT) calculations showed that this interaction occurs through σ-and π-orbital overlaps [73,80]. As for the mechanism of the reaction, the precatalyst [Zr IV ;Co I ] is first reduced to the catalytically active species [Zr IV ;Co −I ] via a reaction with two equivalents of R'MgX (Scheme 5, A). The active catalyst can also be obtained by direct reduction of [Zr IV ;Co I ] with sodium amalgam (Scheme 3). X-ray crystallographic characterization of the active catalyst [Zr IV ;Co −I ] revealed a very short Co-Zr distance of 2.4112(3) Å and thus an even stronger interaction between the two metals compared with [Zr IV ;Co I ]. Furthermore, density functional theory (DFT) calculations showed that this interaction occurs through σand π-orbital overlaps [73,80].
Molecules 2023, 28, x FOR PEER REVIEW 8 of 3 Scheme 5. Proposed coupling mechanism catalyzed by heterobimetallic Zr/Co complexes. Dashed arrows indicate an uncertain bonding situation in the corresponding complex, as it was not isolated and thus not characterized [74].
After the formation of the active catalyst, the addition of the alkyl halide proceeds via single electron transfer (SET, B) to the alkyl halide, yielding a radical that rapidly recombines with the oxidized complex (C). Using (2,2,6,6-tetramethylpiperidin-1-yl)oxy (TEMPO) as a radical trap, the formation of alkyl radicals in the mixture was confirmed Scheme 5. Proposed coupling mechanism catalyzed by heterobimetallic Zr/Co complexes. Dashed arrows indicate an uncertain bonding situation in the corresponding complex, as it was not isolated and thus not characterized [74].
After the formation of the active catalyst, the addition of the alkyl halide proceeds via single electron transfer (SET, B) to the alkyl halide, yielding a radical that rapidly recombines with the oxidized complex (C). Using (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) as a radical trap, the formation of alkyl radicals in the mixture was confirmed. After this formal oxidative addition, a transmetallation (D) with the Grignard reagent R'MgX takes place. It is followed by a reductive elimination (E), regenerating the active catalyst and liberating the desired product R-R'. During the reductive elimination, the Zr plays a pivotal role by withdrawing electron density and aiding the rate-determining step (RDS) of the reaction [74]. This pivotal role is further proven by replacing Zr with its heavier homologue Hf. Analogous [Hf IV ;Co I ] showed significantly diminished activity, most likely due to weaker electron withdrawal from Co by Hf compared to Zr. This was confirmed through an elongation of the Co-Hf bond of 0.04 Å compared with the Zr-Co bond [81].
Employing the same ligand system and an overall similar structural motif in [Ti IV ;Pd II ], Nagashima showed the high catalytic activity of this complex for allylic amination reactions (Scheme 6) [82]. Ess and Michaelis followed up on these findings, utilizing computational studies to provide a plausible mechanism. They could also show experimentally that the structurally similar monometallic [Pd II ] is significantly less active by comparing the Turnover Frequency (TOF), which is 70  Mechanistically, the secondary amine adds nucleophilically to a terminal η 3carbon atom (Scheme 7, A). This results in the reduction of Pd II to Pd 0 . The ammonium intermediate dissociates and is deprotonated by a second amine equiva while an allyl chloride coordinates at the Pd center (B). A backside attack of the Pd 0 a carbon-chloride bond regenerates the catalyst (C). The RDS of the reaction is the add of the amine to the catalyst. Similar to [Zr IV ;Co −I ], the Lewis acidic Ti IV withdraws elec density from the electron-rich transition state, thus lowering it by ~33 kJ mol −1 , comp with [Pd II ] (Scheme 6). X-ray structural analysis also gave experimental proof of metal-metal interaction [83]. Mechanistically, the secondary amine adds nucleophilically to a terminal η 3 -allyl carbon atom (Scheme 7, A). This results in the reduction of Pd II to Pd 0 . The allyl ammonium intermediate dissociates and is deprotonated by a second amine equivalent, while an allyl chloride coordinates at the Pd center (B). A backside attack of the Pd 0 at the carbon-chloride bond regenerates the catalyst (C). The RDS of the reaction is the addition of the amine to the catalyst. Similar to [Zr IV ;Co −I ], the Lewis acidic Ti IV withdraws electron density from the electron-rich transition state, thus lowering it by~33 kJ mol −1 , compared with [Pd II ] (Scheme 6). X-ray structural analysis also gave experimental proof of this metal-metal interaction [83].
while an allyl chloride coordinates at the Pd center (B). A backside attack of the Pd 0 at the carbon-chloride bond regenerates the catalyst (C). The RDS of the reaction is the addition of the amine to the catalyst. Similar to [Zr IV ;Co −I ], the Lewis acidic Ti IV withdraws electron density from the electron-rich transition state, thus lowering it by ~33 kJ mol −1 , compared with [Pd II ] (Scheme 6). X-ray structural analysis also gave experimental proof of this metal-metal interaction [83].
Interestingly, calculations indicate that this heterobimetallic interaction is stronge when both metals are from the same row of the periodic table, meaning that a Ni analogue Interestingly, calculations indicate that this heterobimetallic interaction is stronger when both metals are from the same row of the periodic table, meaning that a Ni analogue of [Ti IV ;Pd II ] should show even higher catalytic activity than its Pd counterpart [85]. While the catalytic activity of such Ni systems was conceptually proven, no optimization of catalytic conditions was completed [82].  By isolating reactive intermediates and performing in-situ high-pressure NMR (H NMR) spectroscopic and theoretical studies, the mechanism presented in Scheme 8 w proposed. The dinitrogen ligand in [Co −I ;Ga III ] is readily replaced by hydrogen, form a masked dihydride in which the oxidative addition of dihydrogen to Co −I occurs read By isolating reactive intermediates and performing in-situ high-pressure NMR (HP-NMR) spectroscopic and theoretical studies, the mechanism presented in Scheme 8 was proposed. The dinitrogen ligand in [Co −I ;Ga III ] is readily replaced by hydrogen, forming a masked dihydride in which the oxidative addition of dihydrogen to Co −I occurs readily (A). This is followed by the RDS, the hydride transfer to CO 2 (B), and quick isomerization to the O-bound formate complex (C). After the liberation of the formate anion (D), dihydrogen binds to the Co I intermediate (E). A deprotonation of the complex by a formate anion (F) formally reduces the Co I center back to a Co −I , thus closing the catalytic cycle. Interestingly, the non-ionic superbase Vkd does not participate directly in the mechanism due to steric interactions but rather participates in a secondary cycle, deprotonating formic acid and thus generating a smaller base in situ that reacts readily with the complex. Replacing Ga III with Al III or In III lowered the activity significantly. While an aluminum analogue still had diminished activity, the indium complex was inactive. Comparing the reactivity of the corresponding intermediates showed that for the [Co −I ;Al III ] complex, the hydride transfer to carbon dioxide is thermodynamically less favorable, as is deprotonation for regeneration of the active catalyst. This emphasizes the significance of the Z-type interaction between the two metals [87].

Steric Scaffolding by Mb for Ma
The concept of a metalloligand is quite common in preparatory organic chemistry Ferrocene-based ligand systems are, for example, employed in asymmetric allyl substitution reactions together with copper or palladium pre-catalysts, asymmetric aldo reactions catalyzed by gold, and asymmetric hydrogenations, to name just a few [89][90][91][92] Ferrocene as a ligand scaffold holds many advantages, such as high stability, both chemically and thermally, a rigid structure, ease of substitution, and planar chirality Particularly, the latter is ideal for asymmetric catalysis, forcing substrates into a certain Scheme 8. Proposed catalytic cycle for carbon dioxide hydrogenation, using [Co −I ;Ga III ] as catalyst and Vkd as a base [87].
Replacing Ga III with Al III or In III lowered the activity significantly. While an aluminum analogue still had diminished activity, the indium complex was inactive. Comparing the reactivity of the corresponding intermediates showed that for the [Co −I ;Al III ] complex, the hydride transfer to carbon dioxide is thermodynamically less favorable, as is deprotonation for regeneration of the active catalyst. This emphasizes the significance of the Z-type interaction between the two metals [87].

Steric Scaffolding by M b for M a
The concept of a metalloligand is quite common in preparatory organic chemistry. Ferrocene-based ligand systems are, for example, employed in asymmetric allyl substitution reactions together with copper or palladium pre-catalysts, asymmetric aldol reactions catalyzed by gold, and asymmetric hydrogenations, to name just a few [89][90][91][92]. Ferrocene as a ligand scaffold holds many advantages, such as high stability, both chemically and thermally, a rigid structure, ease of substitution, and planar chirality. Particularly, the latter is ideal for asymmetric catalysis, forcing substrates into a certain alignment and thus achieving asymmetric induction. Their recognition led them to industrial applications of up to 10,000 tons a −1 [93]. Notable examples of ferrocene-based ligands are Josiphos, Taniaphos, and BPPFA ( Figure 5). However, in most reactions, the active catalyst is not isolated or even identified [94][95][96]. Contrary to ferrocene-based systems, there are well-defined catalyst classes tha Mb for steric scaffolding, according to Figure 3. While electronic interactions (clas Figure 3) are dominated by Z-type interactions between the metalloligand Mb and active metal Ma, steric scaffolding is dominated by a Lewis acidic interaction betwe substrate and Mb aligning it for the reaction [60,65].
The first pioneering efforts to use heterobimetallic complexes for asymm catalysis were completed by Kumada, who developed a chiral ligand for asymm palladium-catalyzed allylic alkylation of 1,3-diketones (Scheme 9) [97]. Using additional chelating function significantly improved the enantioselectivity (52% ee vs. ee), as it puts the alkali metal ion in a crucial position to enhance the stereoselecti Although the active catalyst was never isolated and no in-depth mechanistic studies w undertaken, Park and Hong rationalized the asymmetric induction via a heterobime transition state [Na I ;Pd II ] ‡ [60]. Scheme 9. Enantioselective allylic alkylation and proposed mechanism with transition [Na I ;Pd II ] ‡ for asymmetric induction (* refers to a stereogenic center) [60,97].
Following these explorative studies, Shibasaki and coworkers developed a w class of 1,1′-bi-2-naphthol (BINOL)-based complexes ( Figure 6) and demonstrated versatility [98][99][100][101]. Particularly the multimetallic rare earth (RE)-alkali metal compl ( Figure 6, left) can catalyze a variety of reactions, such as nitroaldol reactions, conju addition of malonates, aza-Henry reactions, and direct aldol reactions [102][103][104][105][106][107]. Lat Contrary to ferrocene-based systems, there are well-defined catalyst classes that use M b for steric scaffolding, according to Figure 3. While electronic interactions (class 1a, Figure 3) are dominated by Z-type interactions between the metalloligand M b and the active metal M a , steric scaffolding is dominated by a Lewis acidic interaction between a substrate and M b aligning it for the reaction [60,65].
The first pioneering efforts to use heterobimetallic complexes for asymmetric catalysis were completed by Kumada, who developed a chiral ligand for asymmetric palladiumcatalyzed allylic alkylation of 1,3-diketones (Scheme 9) [97]. Using an additional chelating function significantly improved the enantioselectivity (52% ee vs. 15% ee), as it puts the alkali metal ion in a crucial position to enhance the stereoselectivity. Although the active catalyst was never isolated and no in-depth mechanistic studies were undertaken, Park and Hong rationalized the asymmetric induction via a heterobimetallic transition state [Na I ;Pd II ] ‡ [60]. Contrary to ferrocene-based systems, there are well-defined catalyst classes that u Mb for steric scaffolding, according to Figure 3. While electronic interactions (class Figure 3) are dominated by Z-type interactions between the metalloligand Mb and t active metal Ma, steric scaffolding is dominated by a Lewis acidic interaction between substrate and Mb aligning it for the reaction [60,65].
The first pioneering efforts to use heterobimetallic complexes for asymmet catalysis were completed by Kumada, who developed a chiral ligand for asymmet palladium-catalyzed allylic alkylation of 1,3-diketones (Scheme 9) [97]. Using additional chelating function significantly improved the enantioselectivity (52% ee vs. 15 ee), as it puts the alkali metal ion in a crucial position to enhance the stereoselectivi Although the active catalyst was never isolated and no in-depth mechanistic studies we undertaken, Park and Hong rationalized the asymmetric induction via a heterobimeta transition state [Na I ;Pd II ] ‡ [60]. Scheme 9. Enantioselective allylic alkylation and proposed mechanism with transition st [Na I ;Pd II ] ‡ for asymmetric induction (* refers to a stereogenic center) [60,97].

Sequential Tandem Catalysis
A fundamentally different approach to heterobimetallic catalysis, from a conceptua point of view, is to utilize the reactivity of both metals instead of using Mb as an extension of the ligand system for Ma. As presented in Figure 3, there are two different approache to involving both metals directly in the bond-breaking and/or bond-formation processes One is via tandem catalysis, for which heterobimetallic complexes are particularly suitable as they can incorporate two different metal centers that can each perform a different type of reaction. Tandem reactions are especially interesting as they can reduce the amount o contamination, purification, and solvent involved in a multistep process [113][114][115][116].
Hahn and Peris have made major contributions in this field. Utilizing 1,2,4-triazol-di ylidene (ditz) as a di-carbene ligand, they obtained a series of heterobimetallic complexe consisting of two different platinum group metals, studied their catalytic behavior in various reactions, and analyzed the interaction between the metals [57,66]. A few notable examples will be given here, demonstrating the versatility of their approach.
Using a [Pd II ;Ir III ] catalyst, they could perform a dehalogenation/transfe hydrogenation tandem reaction, yielding 1-phenylethanol (Scheme 11). Through variation of the reaction conditions, more complex tandem processes were possible, namely a The mechanism is exemplified by the conjugate additions of malonates presented in Scheme 10. The Brønsted basic ligand backbone deprotonates the malonate and thus generates the nucleophile; the Lewis acidic Al center activates the electrophile. Meanwhile, the stereoselectivity is generated by the Li ion, which directs the malonate into an advantageous position [111,112]. The mechanism is exemplified by the conjugate additions of malonates presented in Scheme 10. The Brønsted basic ligand backbone deprotonates the malonate and thus generates the nucleophile; the Lewis acidic Al center activates the electrophile. Meanwhile, the stereoselectivity is generated by the Li ion, which directs the malonate into an advantageous position [111,112].

Sequential Tandem Catalysis
A fundamentally different approach to heterobimetallic catalysis, from a conceptual point of view, is to utilize the reactivity of both metals instead of using Mb as an extension of the ligand system for Ma. As presented in Figure 3, there are two different approaches to involving both metals directly in the bond-breaking and/or bond-formation processes. One is via tandem catalysis, for which heterobimetallic complexes are particularly suitable as they can incorporate two different metal centers that can each perform a different type of reaction. Tandem reactions are especially interesting as they can reduce the amount of contamination, purification, and solvent involved in a multistep process [113][114][115][116].
Hahn and Peris have made major contributions in this field. Utilizing 1,2,4-triazol-diylidene (ditz) as a di-carbene ligand, they obtained a series of heterobimetallic complexes consisting of two different platinum group metals, studied their catalytic behavior in various reactions, and analyzed the interaction between the metals [57,66]. A few notable examples will be given here, demonstrating the versatility of their approach.
Using a [Pd II ;Ir III ] catalyst, they could perform a dehalogenation/transfer hydrogenation tandem reaction, yielding 1-phenylethanol (Scheme 11). Through variation of the reaction conditions, more complex tandem processes were possible, namely a Suzuki-Miyaura coupling/transfer hydrogenation, by introducing phenylboronic acid and a Suzuki-Miyaura coupling/α-alkylation by substituting the secondary for a primary alcohol. These reactions not only proceeded with excellent yields but also demonstrated a degree of intramolecular cooperativity between the two metals [117].

Sequential Tandem Catalysis
A fundamentally different approach to heterobimetallic catalysis, from a conceptual point of view, is to utilize the reactivity of both metals instead of using M b as an extension of the ligand system for M a . As presented in Figure 3, there are two different approaches to involving both metals directly in the bond-breaking and/or bond-formation processes. One is via tandem catalysis, for which heterobimetallic complexes are particularly suitable as they can incorporate two different metal centers that can each perform a different type of reaction. Tandem reactions are especially interesting as they can reduce the amount of contamination, purification, and solvent involved in a multistep process [113][114][115][116].
Hahn and Peris have made major contributions in this field. Utilizing 1,2,4-triazol-diylidene (ditz) as a di-carbene ligand, they obtained a series of heterobimetallic complexes consisting of two different platinum group metals, studied their catalytic behavior in various reactions, and analyzed the interaction between the metals [57,66]. A few notable examples will be given here, demonstrating the versatility of their approach.
Using a [Pd II ;Ir III ] catalyst, they could perform a dehalogenation/transfer hydrogenation tandem reaction, yielding 1-phenylethanol (Scheme 11). Through variation of the reaction conditions, more complex tandem processes were possible, namely a Suzuki-Miyaura coupling/transfer hydrogenation, by introducing phenylboronic acid and a Suzuki-Miyaura coupling/α-alkylation by substituting the secondary for a primary alcohol. These reactions not only proceeded with excellent yields but also demonstrated a degree of intramolecular cooperativity between the two metals [117]. A first indication of the cooperativity between the two different metals is that a mixture of the two homobimetallic complexes performs worse than the heterobimetallic complex under the same reaction conditions. Considering that the distance between Pd and Ir in [Pd II ;Ir III ] is 6.039 Å and therefore at the upper limit of what is ideal for interaction, this is somewhat surprising [117]. Cyclic voltammetry and DFT studies of similar ditz-based heterobimetallic systems indicate that a certain degree of electronic interaction might be responsible. Diruthenium ditz complexes showed a separation of 120 mV between the oxidation peaks, which corresponds to a class II system according to the Robin and Day classification [118,119]. Using DFT, the Tolman Electronic Parameters (TEPs) of the free ditz ligand and ditz systems, in which one coordination site was occupied by a metal, were calculated [120,121]. A clear shift of the TEP value based on the second metal could be observed, further indicating an electronic interaction between the two metals [122]. However, the electronic interaction is too small to account for the strong cooperative effect in the heterobimetallic complexes, and further investigation into the nature of the interaction and the overall mechanism is still ongoing [57].
Using a chiral coligand, resulting in a chiral heterobimetallic [Pd II ;Ir III ]* complex, an enantioselective isomerization/hydrophosphination tandem reaction was catalyzed (Scheme 12). While the activity of the system is high and the regioselectivity is very good, the enantioselectivity is poor (max. 17% ee). However, to this day, this is the only example of a chiral tandem reaction catalyzed by a heterobimetallic complex [123]. A first indication of the cooperativity between the two different metals is that a mixture of the two homobimetallic complexes performs worse than the heterobimetallic complex under the same reaction conditions. Considering that the distance between Pd and Ir in [Pd II ;Ir III ] is 6.039 Å and therefore at the upper limit of what is ideal for interaction, this is somewhat surprising [117]. Cyclic voltammetry and DFT studies of similar ditz-based heterobimetallic systems indicate that a certain degree of electronic interaction might be responsible. Diruthenium ditz complexes showed a separation of 120 mV between the oxidation peaks, which corresponds to a class II system according to the Robin and Day classification [118,119]. Using DFT, the Tolman Electronic Parameters (TEPs) of the free ditz ligand and ditz systems, in which one coordination site was occupied by a metal, were calculated [120,121]. A clear shift of the TEP value based on the second metal could be observed, further indicating an electronic interaction between the two metals [122]. However, the electronic interaction is too small to account for the strong cooperative effect in the heterobimetallic complexes, and further investigation into the nature of the interaction and the overall mechanism is still ongoing [57].
Using a chiral coligand, resulting in a chiral heterobimetallic [Pd II ;Ir III ]* complex, an enantioselective isomerization/hydrophosphination tandem reaction was catalyzed (Scheme 12). While the activity of the system is high and the regioselectivity is very good, the enantioselectivity is poor (max. 17% ee). However, to this day, this is the only example of a chiral tandem reaction catalyzed by a heterobimetallic complex [123]. Utilizing a ditopic ligand system with two very different coordination environmen Marks obtained a series of heterobimetallic [Ti IV ;Cr III ] complexes with varying distanc between the two metal centers, depending on the length (n; n = 0, 2, 6) of the alkyl spac ([Ti IV ;Cr III ] n (Scheme 13) [124]. These systems are active catalysts f oligomerization/polymerization tandem reactions of ethylene, resulting in linear low density polyethylene (LLDPE) with exclusive n-butyl branches when methyl aluminu oxide (MAO) is employed as a cocatalyst for activating the Ti center. Here, the Cr III cent catalyzes the oligomerization of ethylene to 1-hexene selectively, while Ti IV catalyzes th polymerization. Scheme 13. Oligomerization/polymerization tandem reaction, catalyzed by [Ti IV ;Cr III ] n (n = 0, 2, n = 0: highest activity, highest Mn, highest α-olefin incorporation; n = 6: lowest activity, lowest M lowest α-olefin incorporation [124]. The complex with the shortest intermetallic distance (n = 0) exhibited the highe activity, average molecular weight (Mn), and branch density; all three values dropped wi an increasing n. Compared with the mixture of the monometallic analogues, the bran density and Mn are higher for [Ti IV ;Cr III ] 0 . However, the overall activity is higher in th mixture of the monometallic complexes. When 1-pentene was introduced as competitio for incorporation in the polymer chain against the in-situ generated 1-hexene, only hexene enchainment was observed, indicating a favorable interaction between the tw metals towards binding of the latter. Combined with DFT calculations, these insights lea to the proposition of the mechanism presented in Scheme 14. Multiple different pathwa for the formation of 1-hexene and copolymerization with ethylene are possible, but on the main pathway is discussed. After the coordination of two ethylene molecules by th Cr III center, an oxidative addition (A) leads to the formation of a five-membere metallacycle, which is expanded to a seven-membered metallacycle with a third ethylen molecule (B). Reductive elimination (C) leads to the formation of 1-hexene, which form a hydrogen bridge to the Ti IV center, thus positioning it ideally for incorporation into th growing polymer chain (D) [124]. Scheme 12. Enantioselective isomerization/hydrophosphination reaction, catalyzed by chiral [Pd II ;Ir III ]* (* refers to a stereogenic center) [123].
Utilizing a ditopic ligand system with two very different coordination environments, Marks obtained a series of heterobimetallic [Ti IV ;Cr III ] complexes with varying distances between the two metal centers, depending on the length (n; n = 0, 2, 6) of the alkyl spacer ([Ti IV ;Cr III ] n (Scheme 13) [124]. These systems are active catalysts for oligomerization/polymerization tandem reactions of ethylene, resulting in linear low-density polyethylene (LLDPE) with exclusive n-butyl branches when methyl aluminum oxide (MAO) is employed as a cocatalyst for activating the Ti center. Here, the Cr III center catalyzes the oligomerization of ethylene to 1-hexene selectively, while Ti IV catalyzes the polymerization.
Utilizing a ditopic ligand system with two very different coordination environme Marks obtained a series of heterobimetallic [Ti IV ;Cr III ] complexes with varying dista between the two metal centers, depending on the length (n; n = 0, 2, 6) of the alkyl sp ([Ti IV ;Cr III ] n (Scheme 13) [124]. These systems are active catalysts oligomerization/polymerization tandem reactions of ethylene, resulting in linear density polyethylene (LLDPE) with exclusive n-butyl branches when methyl alumin oxide (MAO) is employed as a cocatalyst for activating the Ti center. Here, the Cr III ce catalyzes the oligomerization of ethylene to 1-hexene selectively, while Ti IV catalyzes polymerization. Scheme 13. Oligomerization/polymerization tandem reaction, catalyzed by [Ti IV ;Cr III ] n (n = 0, n = 0: highest activity, highest Mn, highest α-olefin incorporation; n = 6: lowest activity, lowes lowest α-olefin incorporation [124]. The complex with the shortest intermetallic distance (n = 0) exhibited the hig activity, average molecular weight (Mn), and branch density; all three values dropped an increasing n. Compared with the mixture of the monometallic analogues, the bra density and Mn are higher for [Ti IV ;Cr III ] 0 . However, the overall activity is higher in mixture of the monometallic complexes. When 1-pentene was introduced as competi for incorporation in the polymer chain against the in-situ generated 1-hexene, onl hexene enchainment was observed, indicating a favorable interaction between the metals towards binding of the latter. Combined with DFT calculations, these insights to the proposition of the mechanism presented in Scheme 14. Multiple different pathw for the formation of 1-hexene and copolymerization with ethylene are possible, but the main pathway is discussed. After the coordination of two ethylene molecules by Cr III center, an oxidative addition (A) leads to the formation of a five-memb metallacycle, which is expanded to a seven-membered metallacycle with a third ethy molecule (B). Reductive elimination (C) leads to the formation of 1-hexene, which fo a hydrogen bridge to the Ti IV center, thus positioning it ideally for incorporation into growing polymer chain (D) [124]. Scheme 13. Oligomerization/polymerization tandem reaction, catalyzed by [Ti IV ;Cr III ] n (n = 0, 2, 6). n = 0: highest activity, highest M n , highest α-olefin incorporation; n = 6: lowest activity, lowest M n , lowest α-olefin incorporation [124].
The complex with the shortest intermetallic distance (n = 0) exhibited the highest activity, average molecular weight (M n ), and branch density; all three values dropped with an increasing n. Compared with the mixture of the monometallic analogues, the branch density and M n are higher for [Ti IV ;Cr III ] 0 . However, the overall activity is higher in the mixture of the monometallic complexes. When 1-pentene was introduced as competition for incorporation in the polymer chain against the in-situ generated 1-hexene, only 1-hexene enchainment was observed, indicating a favorable interaction between the two metals towards binding of the latter. Combined with DFT calculations, these insights lead to the proposition of the mechanism presented in Scheme 14. Multiple different pathways for the formation of 1-hexene and copolymerization with ethylene are possible, but only the main pathway is discussed. After the coordination of two ethylene molecules by the Cr III center, an oxidative addition (A) leads to the formation of a five-membered metallacycle, which is expanded to a seven-membered metallacycle with a third ethylene molecule (B). Reductive elimination (C) leads to the formation of 1-hexene, which forms a hydrogen bridge to the Ti IV center, thus positioning it ideally for incorporation into the growing polymer chain (D) [124]. A different approach was taken by Rau and his coworkers. They developed photochemical molecular devices (PMDs) and used them for various reduction reactions [125][126][127][128][129][130][131][132][133]. These PMDs consist of three structural units ( Figure 7): a photoactive Ru II complex fragment that acts as a light absorber, a catalytic center (in the chosen example, a [Rh III Cp*Cl] moiety, Cp* = C5Me5), and a bridging unit that connects the two metals via a conjugated reducible π-electron system [129,133].  A different approach was taken by Rau and his coworkers. They developed photochemical molecular devices (PMDs) and used them for various reduction reactions [125][126][127][128][129][130][131][132][133]. These PMDs consist of three structural units ( Figure 7): a photoactive Ru II complex fragment that acts as a light absorber, a catalytic center (in the chosen example, a [Rh III Cp*Cl] moiety, Cp* = C 5 Me 5 ), and a bridging unit that connects the two metals via a conjugated reducible π-electron system [129,133]. A different approach was taken by Rau and his coworkers. They developed photochemical molecular devices (PMDs) and used them for various reduction reactions [125][126][127][128][129][130][131][132][133]. These PMDs consist of three structural units ( Figure 7): a photoactive Ru complex fragment that acts as a light absorber, a catalytic center (in the chosen example a [Rh III Cp*Cl] moiety, Cp* = C5Me5), and a bridging unit that connects the two metals via a conjugated reducible π-electron system [129,133].  [Ru II ;Rh III ] was used for the photochemical reduction of nicotinamide, with triethylamine as a reducing agent and NaH 2 PO 4 as a proton source (Scheme 15) [132]. The mechanism of this reduction nicely demonstrates the underlying principle of PMDs. [Ru II ;Rh III ] was used for the photochemical reduction of nicotinamide, with triethylamine as a reducing agent and NaH2PO4 as a proton source (Scheme 15) [132]. The mechanism of this reduction nicely demonstrates the underlying principle of PMDs. Scheme 15. Photocatalytic reduction of nicotinamide with triethylamine as reducing agent NaH2PO4 as proton source and [Ru II ;Rh III ] as catalyst. Corresponding charge of the complex no indicated. Oxidized triethylamine decomposes in a secondary reaction to undefined products (Cp* = C5Me5) [132].
First, the Ru II center is photoexcited (A) which enables the abstraction of an electron from triethylamine via single electron transfer (SET). The electron is then transferred to the Rh III center via the reducible bridging unit. Replacing the bridging unit with a simpler bipyrimidine led to a complete loss of catalytic activity, showing that the transfer of electrons from the light absorber to the catalytic center is the important step [129,133]. The photoredox reaction between the Ru II center and triethylamine has to occur twice (B) to yield a reduced Rh I species, which can then oxidatively add a proton (C) to generate a rhodium(III) hydride species. A hydride transfer then reduces nicotinamide. The advantage of these systems becomes clear when they are compared with their monometallic counterparts. They show diminished to no catalytic activity, as the reaction mixture is extremely diluted and two intermolecular electron transfers would have to occur, in between which the catalytically active center has to be stable [132,134,135].

Synergistic Catalysis
Out of the four classes of heterobimetallic complexes, synergistic complexes are the least developed (Figure 3) [68]. While the other three classes have been recognized as viable options to design novel catalysts and thus reviewed extensively, the first example of a synergistic interaction in a heterobimetallic complex was reported in 2003 by Lau [136]. However, most of the progress in this field has occurred over the last decade [68] The potential of synergistic interactions is apparent when considering the mechanism of CO2 reduction by [Ni] CODH (Scheme 2). Both metals participate directly in the activation of the substrate and thus enable the overall reactivity. Reviewing this field is compounded by the inconsistent use of the term synergism. While it is narrowly defined in this work as two metals working together in the same bond-breaking and/or bond-formation process First, the Ru II center is photoexcited (A) which enables the abstraction of an electron from triethylamine via single electron transfer (SET). The electron is then transferred to the Rh III center via the reducible bridging unit. Replacing the bridging unit with a simpler bipyrimidine led to a complete loss of catalytic activity, showing that the transfer of electrons from the light absorber to the catalytic center is the important step [129,133]. The photoredox reaction between the Ru II center and triethylamine has to occur twice (B) to yield a reduced Rh I species, which can then oxidatively add a proton (C) to generate a rhodium(III) hydride species. A hydride transfer then reduces nicotinamide. The advantage of these systems becomes clear when they are compared with their monometallic counterparts. They show diminished to no catalytic activity, as the reaction mixture is extremely diluted and two intermolecular electron transfers would have to occur, in between which the catalytically active center has to be stable [132,134,135].

Synergistic Catalysis
Out of the four classes of heterobimetallic complexes, synergistic complexes are the least developed (Figure 3) [68]. While the other three classes have been recognized as viable options to design novel catalysts and thus reviewed extensively, the first example of a synergistic interaction in a heterobimetallic complex was reported in 2003 by Lau [136]. However, most of the progress in this field has occurred over the last decade [68]. The potential of synergistic interactions is apparent when considering the mechanism of CO 2 reduction by [Ni] CODH (Scheme 2). Both metals participate directly in the activation of the substrate and thus enable the overall reactivity. Reviewing this field is compounded by the inconsistent use of the term synergism. While it is narrowly defined in this work as two metals working together in the same bond-breaking and/or bond-formation process of a single reaction, it is sometimes used to describe any increase in reactivity when a heterobimetallic complex is used or to describe any kind of interaction between the two metals without further specification [57,61,118].
Most synergistic heterobimetallic systems use synergistic interactions for the activation of small molecules. The very first system in which a synergistic interaction was found ([Ru I ;Mo I ], Scheme 16) is active for both the decomposition of formic acid to carbon dioxide and dihydrogen and the reverse CO 2 hydrogenation yielding formate salts, although both with very low TON (<43) [136].
Molecules 2023, 28, x FOR PEER REVIEW 18 of 33 of a single reaction, it is sometimes used to describe any increase in reactivity when a heterobimetallic complex is used or to describe any kind of interaction between the two metals without further specification [57,61,118]. Most synergistic heterobimetallic systems use synergistic interactions for the activation of small molecules. The very first system in which a synergistic interaction was found ([Ru I ;Mo I ], Scheme 16) is active for both the decomposition of formic acid to carbon dioxide and dihydrogen and the reverse CO2 hydrogenation yielding formate salts although both with very low TON (<43) [136]. [Ru I ;Mo I ] first activates H2 across the Ru-Mo bond (A), followed by the insertion of CO2 into the more hydridic Ru-H bond (B). The resulting complex liberates the anionic formate (C), which, in the last step, abstracts the bridging H atom, regenerating the catalyst (D). The reaction was monitored using HP-NMR, and the only species observed throughout the reaction was [Ru I ;Mo I ]. This, together with the studies completed on isolated intermediates, indicates that the low activity is due to a non-facile reaction of [Ru I ;Mo I ] with H2 to form the dihydride species. However, the monometallic counterparts and mixtures thereof were all inactive for the same reactions, showing that the heterobimetallic assembly is essential for catalytic activity [136].
Inspired by heme-containing nitrite reductases, Peters and coworkers developed a heterobimetallic [Co II ;Mg II ] complex for the electrochemical reduction of NO2 − (Scheme 17). Using −1.2 V vs. SCE and Et3NHCl as proton sources, N2O was produced selectively Based on stoichiometric reactions and isolated intermediates, a rudimentary mechanism was proposed (Scheme 17). Quintessential for the overall activity is the initial binding of nitrite by both the Mg II and Co II centers, as it not only activates the nitrite but also stabilizes the NO2 − adduct, which is the presumed active catalyst. A single electron reduction (A) activates the N-O bond, which then readily undergoes N-O bond cleavage (B) with a mild acid, accompanied by a significant increase in the Mg-Co distance from 3.3 Å in the reduced nitrite complex to 3.7 Å in the nitrosyl aqua complex. The nitrosyl aqua complex liberates N2O after successive reductions and H2O after further protonation (C) [137]. [Ru I ;Mo I ] first activates H 2 across the Ru-Mo bond (A), followed by the insertion of CO 2 into the more hydridic Ru-H bond (B). The resulting complex liberates the anionic formate (C), which, in the last step, abstracts the bridging H atom, regenerating the catalyst (D). The reaction was monitored using HP-NMR, and the only species observed throughout the reaction was [Ru I ;Mo I ]. This, together with the studies completed on isolated intermediates, indicates that the low activity is due to a non-facile reaction of [Ru I ;Mo I ] with H 2 to form the dihydride species. However, the monometallic counterparts and mixtures thereof were all inactive for the same reactions, showing that the heterobimetallic assembly is essential for catalytic activity [136].
Inspired by heme-containing nitrite reductases, Peters and coworkers developed a heterobimetallic [Co II ;Mg II ] complex for the electrochemical reduction of NO 2 − (Scheme 17). Using −1.2 V vs. SCE and Et 3 NHCl as proton sources, N 2 O was produced selectively. Based on stoichiometric reactions and isolated intermediates, a rudimentary mechanism was proposed (Scheme 17). Quintessential for the overall activity is the initial binding of nitrite by both the Mg II and Co II centers, as it not only activates the nitrite but also stabilizes the NO 2 − adduct, which is the presumed active catalyst. A single electron reduction (A) activates the N-O bond, which then readily undergoes N-O bond cleavage (B) with a mild acid, accompanied by a significant increase in the Mg-Co distance from 3.3 Å in the reduced nitrite complex to 3.7 Å in the nitrosyl aqua complex. The nitrosyl aqua complex liberates N 2 O after successive reductions and H 2 O after further protonation (C) [137]. Nakao used this principle of double activation of a single substrate to catalytically activate relatively inert C-O and C-F bonds [138,139]. Through the isolation of reactive intermediates, isotopic labeling studies, and DFT calculations, the mechanism presented in Scheme 18 was proposed. Anisole initially coordinates to the Rh I center in an η 2 fashion, which is directly followed by activation of the methoxy function by the Al I center with simultaneous η 1 coordination of the phenyl rest to the Rh I center (A). Once the C(sp 2 )-O bond has been broken (B), the OMe moiety is bound as a bridging moiety, Al III (µ-OMe)Rh I , formally oxidizing the aluminum center. Reduction of the Al III species with a silane (C) regenerates the catalyst and yields the final product [139]. Nakao used this principle of double activation of a single substrate to catalytically activate relatively inert C-O and C-F bonds [138,139]. Through the isolation of reactive intermediates, isotopic labeling studies, and DFT calculations, the mechanism presented in Scheme 18 was proposed. Anisole initially coordinates to the Rh I center in an η 2 fashion, which is directly followed by activation of the methoxy function by the Al I center with simultaneous η 1 coordination of the phenyl rest to the Rh I center (A). Once the C(sp 2 )-O bond has been broken (B), the OMe moiety is bound as a bridging moiety, Al III (µ-OMe)Rh I , formally oxidizing the aluminum center. Reduction of the Al III species with a silane (C) regenerates the catalyst and yields the final product [139]. The unusual reactivity of [Al I ;Rh I ] is enabled by two types of interactions. On the one hand, the Z-type interaction of Al with Rh facilitates the catalytic reduction of Al III to Al I with mild reductants, but more importantly the simultaneous activation of the substrate at both metal centers [138]. Additionally, the sterically hindered ligand system induces orthogonal chemoselectivity compared with a conventional Ni catalyst The unusual reactivity of [Al I ;Rh I ] is enabled by two types of interactions. On the one hand, the Z-type interaction of Al with Rh facilitates the catalytic reduction of Al III to Al I with mild reductants, but more importantly the simultaneous activation of the substrate at both metal centers [138]. Additionally, the sterically hindered ligand system induces orthogonal chemoselectivity compared with a conventional Ni catalyst [Ni] 0 ([Ni(COD) 2 ] (20 mol%), 1,3-bis(2,6-diisopropylphenyl)imidazolinium chloride (SIPr·HCl, 40 mol%), Scheme 19) [139]. The unusual reactivity of [Al I ;Rh I ] is enabled by two types of interactions. On the one hand, the Z-type interaction of Al with Rh facilitates the catalytic reduction of Al III to Al I with mild reductants, but more importantly the simultaneous activation of the substrate at both metal centers [138]. Additionally, the sterically hindered ligand system induces orthogonal chemoselectivity compared with a conventional Ni catalyst [Ni] 0 ([Ni(COD)2] (20 mol%), 1,3-bis(2,6-diisopropylphenyl)imidazolinium chloride (SIPr·HCl, 40 mol%), Scheme 19) [139].  and analyzing the activity of the resulting complexes indicated that the bimetallic NiFe center is responsible for the overall catalytic activity rather than one single Ni II or Fe III site. Using DFT calculations in combination with electrochemical measurements, the mechanism proposed in Scheme 20 was proposed. Through several single electro oxidations, the high-valent [Ni II (µ-O)Fe IV (O)] species is obtained. Here, the radical character of the oxygen is maintained, and thus the rate-determining oxyl-oxo coupling can occur. This pathway echoes the important role of lattice oxygen in heterogeneous NiFe catalysts [140,141]. Hong and coworkers developed a series of heterobimetallic Ir III -based metal complexes, most notable among them the [Ni II ;Ir III ] complex depicted in Scheme 21. First, they studied their catalytic behavior towards formic acid dehydrogenation, yielding carbon dioxide and dihydrogen, and found that the heterobimetallic complexes significantly increased the rate of dihydrogen production. Of the studied complexes, the heterobimetallic [Ni II ;Ir III ] complex was the most active [142]. In the next step, the resulting hydride species was not just protonated but instead used for the reduction of oxygen. After optimizing the reaction conditions, intermediates were isolated, and kinetic analysis and DFT calculations were completed, culminating in the mechanism presented in Scheme 21.
Molecules 2023, 28 The active catalyst is formed by the coordination of formate (A) to give an Ni II (µ-O2CH)Ir III complex, which readily releases CO2 (B) to form the hydride species on reaction with ethylene glycol. The rate-determining step is the subsequent addition of oxygen (C) to form the peroxyl species. Here, the Ni II moiety again exerts an influence by increasing the acidity of the protic ethylene glycol coordinated at the Ni center. This facilitates the release of hydrogen peroxide coupled with the coordination of a new formate unit, regenerating the active catalyst [143]. Similar [Cu II ;Ir III ] complexes exhibited high catalytic activity for the aerobic oxidation of olefins, especially compared with their monometallic counterparts, but no indication of a synergistic mechanism was found. The increase in reactivity is probably due to a tuning of the stereoelectronic environment of the Ir III center [144].
Polymerization reactions, in particular copolymerization reactions, have already utilized multimetallic assemblies [145,146]. While early works focused on homobi-and multimetallic complexes, Williams and coworkers created a group of heterobimetallic macrocyclic complexes that proved to be excellent catalysts for copolymerization reactions between epoxides and carbon dioxide [147][148][149][150][151]. Of these complexes, [Co II ;Mg II ] is the most active system and exemplifies the synergistic interaction (Scheme 22) [152,153].
The active catalyst is formed by the coordination of formate (A) to give an Ni II (µ-O 2 CH)Ir III complex, which readily releases CO 2 (B) to form the hydride species on reaction with ethylene glycol. The rate-determining step is the subsequent addition of oxygen (C) to form the peroxyl species. Here, the Ni II moiety again exerts an influence by increasing the acidity of the protic ethylene glycol coordinated at the Ni center. This facilitates the release of hydrogen peroxide coupled with the coordination of a new formate unit, regenerating the active catalyst [143]. Similar [Cu II ;Ir III ] complexes exhibited high catalytic activity for the aerobic oxidation of olefins, especially compared with their monometallic counterparts, but no indication of a synergistic mechanism was found. The increase in reactivity is probably due to a tuning of the stereoelectronic environment of the Ir III center [144].
Polymerization reactions, in particular copolymerization reactions, have already utilized multimetallic assemblies [145,146]. While early works focused on homobi-and multimetallic complexes, Williams and coworkers created a group of heterobimetallic macrocyclic complexes that proved to be excellent catalysts for copolymerization reactions between epoxides and carbon dioxide [147][148][149][150][151]. Of these complexes, [Co II ;Mg II ] is the most active system and exemplifies the synergistic interaction (Scheme 22) [152,153]. Detailed kinetic studies showed that both metals have distinct roles in catalysis (Scheme 23). The RDS of the copolymerization is the attack of the cobalt carbonate unit on the epoxide (A). Here, the epoxide coordinated at the Mg center lowers the transition state entropy, favoring polymerization versus back-biting and yielding a cyclic carbonate. Meanwhile, the coordination of the carbonate at the Co center increases its nucleophilicity and thus reduces the transition state enthalpy. Carbon dioxide can replace the polymeric carbonate moiety at Co (B) and is then preorganized for the attack of the Mg alkoxide (C). This alternating chain shuttling mechanism is responsible for perfect copolymerization [153].
Detailed kinetic studies showed that both metals have distinct roles in catalysis (Scheme 23). The RDS of the copolymerization is the attack of the cobalt carbonate unit on the epoxide (A). Here, the epoxide coordinated at the Mg center lowers the transition state entropy, favoring polymerization versus back-biting and yielding a cyclic carbonate. Meanwhile, the coordination of the carbonate at the Co center increases its nucleophilicity and thus reduces the transition state enthalpy. Carbon dioxide can replace the polymeric carbonate moiety at Co (B) and is then preorganized for the attack of the Mg alkoxide (C). This alternating chain shuttling mechanism is responsible for perfect copolymerization [153]. In analogy to the first synergistic heterobimetallic system, Hey-Hawkins and coworkers published a series of heterobimetallic group 6/group 9 complexes [M 0 ;M' III ] (M = Cr, Mo, W; M = Co, Rh, Ir) and tested their catalytic activity in homogeneous carbon dioxide hydrogenation (Scheme 24). Here, [Mo 0 ;Ir III ] showed the highest activity and a marked increase in activity when compared with its monometallic counterparts [154][155][156]. Using spectroscopic methods such as IR and 31 P{ 1 H} NMR spectroscopy, but in particular cyclic voltammetry, the two metal centers in all [M 0 ;M′ III ] complexes were found to be electronically isolated, in contrast to all previously reported heterobimetallic complexes utilizing synergistic mechanisms [154]. The mechanism depicted in Scheme 25 was proposed based on NMR spectroscopic studies, kinetic measurements, the isolation of intermediates, and the study of their reactivity in combination with DFT calculations. Scheme 25. Proposed catalytic cycle for CO2 hydrogenation using [Mo 0 ;Ir III ] as catalyst and TMG as base (TMG = 1,1,3,3-tetramethylguanidine, Cp* = C5Me5) [155]. Using spectroscopic methods such as IR and 31 P{ 1 H} NMR spectroscopy, but in particular cyclic voltammetry, the two metal centers in all [M 0 ;M III ] complexes were found to be electronically isolated, in contrast to all previously reported heterobimetallic complexes utilizing synergistic mechanisms [154]. The mechanism depicted in Scheme 25 was proposed based on NMR spectroscopic studies, kinetic measurements, the isolation of intermediates, and the study of their reactivity in combination with DFT calculations. Using spectroscopic methods such as IR and 31 P{ 1 H} NMR spectroscopy, but in particular cyclic voltammetry, the two metal centers in all [M 0 ;M′ III ] complexes were found to be electronically isolated, in contrast to all previously reported heterobimetallic complexes utilizing synergistic mechanisms [154]. The mechanism depicted in Scheme 25 was proposed based on NMR spectroscopic studies, kinetic measurements, the isolation of intermediates, and the study of their reactivity in combination with DFT calculations. Scheme 25. Proposed catalytic cycle for CO2 hydrogenation using [Mo 0 ;Ir III ] as catalyst and TMG as base (TMG = 1,1,3,3-tetramethylguanidine, Cp* = C5Me5) [155]. . This intermediate is the resting state of the reaction, as the following hydride transfer to CO 2 is the rate-determining step of the reaction. The last step is the liberation of formate from [Mo 0 ;Ir III (HCO 2 )], regenerating the active catalyst. DFT calculations revealed that the underlying mechanism of the reduction is a lowering of the Pauli repulsion between the HOMO of CO 2 and the HOMO of [Mo 0 ;Ir III (H)] (Figure 8). Throughout the mechanism, the octahedral Mo(CO) 3 P 3 moiety does not participate actively in the reaction but only plays an auxiliary role in the rate-determining step by optimizing the orbital interaction between the active center and the substrate, thus increasing the reactivity [155].

Conclusions
The advantage of heterobimetallic catalysts over their monometallic counterparts long been established, and, while not comprehensive, this review presents an overview mechanistic aspects for this exceptional class of compounds. As illustrated by examples, the increase in activity can be attributed to interactions between the two m centers. Depending on how the metals interact with the substrates, the catalyst can classified. While an increase in activity by using the second metal as a metalloligand o increase in selectivity by using it to provide scaffolding are well established, using the metals in a cooperative way is still underdeveloped. However, using heterobimeta catalysts in a cooperative fashion enables unique reactivity and reactions and undoubtedly be the future of this field.

Conclusions
The advantage of heterobimetallic catalysts over their monometallic counterparts has long been established, and, while not comprehensive, this review presents an overview of mechanistic aspects for this exceptional class of compounds. As illustrated by the examples, the increase in activity can be attributed to interactions between the two metal centers. Depending on how the metals interact with the substrates, the catalyst can be classified. While an increase in activity by using the second metal as a metalloligand or an increase in selectivity by using it to provide scaffolding are well established, using the two metals in a cooperative way is still underdeveloped. However, using heterobimetallic catalysts in a cooperative fashion enables unique reactivity and reactions and will undoubtedly be the future of this field.