The Chemical Synthesis of the Crinine and Haemanthamine Alkaloids: Biologically Active and Enantiomerically-Related Systems that Serve as Vehicles for Showcasing New Methodologies for Molecular Assembly †

The title alkaloids, often referred to collectively as crinines, are a prominent group of structurally distinct natural products with additional members being reported on a regular basis. As such, and because of their often notable biological properties, they have attracted attention as synthetic targets since the mid-1950s. Such efforts continue unabated and more recent studies on these alkaloids have focused on using them as vehicles for showcasing the utility of new synthetic methods. This review provides a comprehensive survey of the nearly seventy-year history of these synthetic endeavors.

New members of these families continue to be identified on a regular basis with the alkaloids 3-6 ( Figure 2) having been reported recently.
The first three of these newer natural products were isolated from Crinum latifolium collected in Hanoi [4] and the fourth from Crinum jagus found in Senegal [5]. Their structures highlight the functional and stereochemical diversity that can be encountered within this family of alkaloids [1].
The crinines are thought to arise in vivo by the pathway shown in Scheme 1 and wherein L-tyrosine (7) is first converted into O-methylnorbelladine (8) that itself undergoes intramolecular oxidative para-para phenolic coupling to afford the cyclohexadienone 9 [6,7]. The nitrogen associated with this last compound is perfectly poised to add, via an enzymatically-controlled hetero-Michael addition process, to the prochiral cyclohexadienone moiety (of 9), thereby affording, depending upon the enantiomeric form of the final New members of these families continue to be identified on a regular alkaloids 3-6 ( Figure 2) having been reported recently. The first three of these newer natural products were isolated from Cr collected in Hanoi [4] and the fourth from Crinum jagus found in Senegal [ tures highlight the functional and stereochemical diversity that can be encou this family of alkaloids [1].
The crinines are thought to arise in vivo by the pathway shown in wherein L-tyrosine (7) is first converted into O-methylnorbelladine (8) tha goes intramolecular oxidative para-para phenolic coupling to afford the cyc 9 [6,7]. The nitrogen associated with this last compound is perfectly poised enzymatically-controlled hetero-Michael addition process, to the prochira enone moiety (of 9), thereby affording, depending upon the enantiomeric fo product, either the tetracyclic compound 10 or its enantiomer. In the case of sequence, the carbonyl group within enone 10 is then reduced diastereose ford (+)-maritidine (11), this being a rare example of an haemanthamine/c kaloid that has methoxy groups rather than a methylenedioxy group attac matic ring. New members of these families continue to be identified on a regular alkaloids 3-6 ( Figure 2) having been reported recently.  Scheme 1. The biosynthetic pathway leading from L-tyrosine (7) to (+)-maritidine (11).
While none of compounds 3-6, for example, show any notable biological activities i the limited assays used to evaluate them thus far [4,5], collectively speaking, the crinin alkaloids display a remarkable range of often-pronounced biological effects. These in clude anti-viral, anti-bacterial, anti-proliferative, anti-malarial, anti-plasmodial, an The first total synthesis of a crinine alkaloid was reported by Muxfeldt in 1966 [23]. As shown in Scheme 4, β-keto-ester 18 was reacted with in situ-generated nitrous acid to yield an α-nitroso-derivative that was reduced with zinc in acetic acid. Acetylation of the resulting amine then gave acetamide (±)-19 and Michael addition of the last compound to methyl vinyl ketone (MVK), cyclization of the resulting adduct followed by saponification of the carbomethoxy group and decarboxylation of the resulting acid, then gave compound (±)-20. Upon reduction with sodium borohydride, this compound was converted into allylic alcohol (±)-21 and its corresponding trans-isomer. Heating this mixture with dimethylacetamide dimethyl acetal in either refluxing benzene or toluene resulted in an Eschenmoser-Claisen rearrangement, thereby affording a mixture of compound (±)-22 and its diastereoisomer in 45% combined yield. This mixture was accompanied by the cyclohexa-1,3-diene resulting from dehydration of substrate (±)-21 and/or its diastereoisomer. Saponification of the mixture of compound (±)-22 and its diastereoisomer using sodium hydroxide afforded lactam (±)-23 that was converted into the C3a-arylated hexahydroindole (±)-24 on treatment with lithium aluminium hydride. Subjection of this last compound to a Pictet-Spengler reaction (precise conditions not given) afforded the 5,10b-ethanophenanthridine (±)-25, which was converted, through a SeO 2 -mediated allylic oxidation reaction, into (±)-crinine [(±) -26]. A notable feature of this synthesis was the creation of the quaternary carbon center of the final target by subjecting a C3-arylated cyclohex-2-en-1-ol to a Claisen-type reaction. This strategy has, as detailed below, been used in several other studies. and its diastereoisomer in 45% combined yield. This mixture was accompanied by the cyclohexa-1,3-diene resulting from dehydration of substrate (±)-21 and/or its diastereoisomer. Saponification of the mixture of compound (±)-22 and its diastereoisomer using sodium hydroxide afforded lactam (±)-23 that was converted into the C3a-arylated hexahydroindole (±)-24 on treatment with lithium aluminium hydride. Subjection of this last compound to a Pictet-Spengler reaction (precise conditions not given) afforded the 5,10bethanophenanthridine (±)-25, which was converted, through a SeO2-mediated allylic oxidation reaction, into (±)-crinine [(±) -26]. A notable feature of this synthesis was the creation of the quaternary carbon center of the final target by subjecting a C3-arylated cyclohex-2-en-1-ol to a Claisen-type reaction. This strategy has, as detailed below, been used in several other studies. In 1967, Whitlock described [24,25] a synthesis of (±)-crinine (Scheme 5). This involved, in its early stages, reaction of the α-arylated β-chloroenone 27 with aziridine to afford product 28 that upon treatment with sodium iodide at elevated temperatures gave, presumably through cyclization of intermediate 29, the hexahydroindole (±)-30 incorporating the quaternary carbon of the target. Catalytic hydrogenation of this last compound afforded a mixture of the cis-configured octahydroindole (±)-31 (76%) and the corresponding trans-isomer (5.5%). Subjection of the former product to a Pictet-Spengler reaction In 1967, Whitlock described [24,25] a synthesis of (±)-crinine (Scheme 5). This involved, in its early stages, reaction of the α-arylated β-chloroenone 27 with aziridine to afford product 28 that upon treatment with sodium iodide at elevated temperatures gave, presumably through cyclization of intermediate 29, the hexahydroindole (±)-30 incorporating the quaternary carbon of the target. Catalytic hydrogenation of this last compound afforded a mixture of the cis-configured octahydroindole (±)-31 (76%) and the corresponding trans-isomer (5.5%). Subjection of the former product to a Pictet-Spengler reaction with formalin in methanol gave compound (±)-32. This was then submitted to an α-bromination/dehydrobromination sequence to afford the enone (±)-33 (73%), which was itself reduced with lithium aluminium hydride to the corresponding allylic alcohol, (±)-34 seemingly as a single diastereoisomer but of undefined configuration. Tosylation of compound (±)-34 and hydrolysis of the resulting ester in aqueous sodium bicarbonate then afforded (±)-crinine [(±) -26] in 42% yield.
with formalin in methanol gave compound (±)-32. This was then submitted to an α-bromination/dehydrobromination sequence to afford the enone (±)-33 (73%), which was itself reduced with lithium aluminium hydride to the corresponding allylic alcohol, (±)-34 seemingly as a single diastereoisomer but of undefined configuration. Tosylation of compound (±)-34 and hydrolysis of the resulting ester in aqueous sodium bicarbonate then afforded (±)-crinine [(±) -26] in 42% yield. Stevens' syntheses of (±)-elwesine and its C3-epimer (Scheme 6), reported in the early 1970s [26,27], provided another elegant example of the synthesis of a C3a-arylated perhydroindole that then served as the substrate for a concluding Pictet-Spengler cyclisation reaction. Thus, the iminocyclopropane 35, obtained from piperonyl cyanide, was subjected to thermal rearrangement in the presence of ammonium chloride to give the isomeric dihydropyridine 36. This compound was engaged in an annulation reaction with methyl vinyl ketone (MVK), thus allowing for assembly of the crinine C-ring and thereby the C3a-arylperhydroindole (±)-37. Reduction of this last compound with sodium borohydride afforded a 3:1 mixture of the epimeric alcohols (±)-38 and (±)-39 (no yield specified), while reduction with hydrogen and PtO2 in i-propanol afforded a 1:8 mixture of the same products in 96% combined yield. Hydrogenolytic cleavage of the benzyl group attached at nitrogen in compound (±)-38 was achieved using hydrogen and 10% Pd on C. The product 2°-amine (±)-40 was then subjected to standard Pictet-Spengler conditions to afford (±)-3-epi-elwesine [(±) -41]. In an analogous sequence of reactions, compound (±)-39 was converted, via amine (±)-42, into (±)-elwesine [(±)-43]. Stevens' syntheses of (±)-elwesine and its C3-epimer (Scheme 6), reported in the early 1970s [26,27], provided another elegant example of the synthesis of a C3a-arylated perhydroindole that then served as the substrate for a concluding Pictet-Spengler cyclisation reaction. Thus, the iminocyclopropane 35, obtained from piperonyl cyanide, was subjected to thermal rearrangement in the presence of ammonium chloride to give the isomeric dihydropyridine 36. This compound was engaged in an annulation reaction with methyl vinyl ketone (MVK), thus allowing for assembly of the crinine C-ring and thereby the C3a-arylperhydroindole (±)-37. Reduction of this last compound with sodium borohydride afforded a 3:1 mixture of the epimeric alcohols (±)-38 and (±)-39 (no yield specified), while reduction with hydrogen and PtO 2 in i-propanol afforded a 1:8 mixture of the same products in 96% combined yield. Hydrogenolytic cleavage of the benzyl group attached at nitrogen in compound (±)-38 was achieved using hydrogen and 10% Pd on C. The product 2 • -amine (±)-40 was then subjected to standard Pictet-Spengler conditions to afford (±)-3-epi-elwesine [(±) -41]. In an analogous sequence of reactions, compound (±)-39 was converted, via amine (±)-42, into (±)-elwesine [(±) -43]. A C-ring annulation protocol related to the one described immediately above was employed by Michael in a formal total synthesis of (±)-dihydromaritidine [28]. Thus, as shown in the early parts of Scheme 7, treatment of the N-benzylated lactam (±)-44 with phosgene afforded the C-chloroiminium ion (±)-45 that was reacted with the MVK derivative 46 in the presence of triethylamine. The primary condensation products of this process were then reacted with trifluoroacetic acid (TFA) under ultrasonic irradiation conditions to afford cyclohexenone (±)-47, albeit in only 29% yield. Subjection of this last compound to reduction with lithium in liquid ammonia then gave the saturated equivalent (±)-48 stereoselectively. Compound (±)-48 was a key intermediate associated with the Speckamp [29] total synthesis (±)-dihydromaritidine that involved, as a key step, the regioselective reduction of imide (±)-49 to the carbinol-lactam (±)-50. Exposure of this last compound to formic acid gave, via cyclization of an in situ-generated α-acylimmonium ion with the pendant alkyne, the expected cyclohexanone annulated lactam. Selective protection of the associated ketone residue as the corresponding ethylene ketal, reductive cleavage of the lactam carbonyl, and deprotection of the cyclohexanone then provided compound (±)-48, which was selectively reduced under the conditions established by Stevens (cf (±)-37 → (±)-39 in Scheme 6), thus affording alcohol (±)-51. Carrying this compound forward, also under conditions established by Stevens, gave (±)-dihydromaritidine [(±)-52].

Scheme 6. Stevens' total syntheses of (±)-3-epi-elwesine [(±)-41] and (±)-elwesine [(±)-43].
A C-ring annulation protocol related to the one described immediately above was employed by Michael in a formal total synthesis of (±)-dihydromaritidine [28]. Thus, as shown in the early parts of Scheme 7, treatment of the N-benzylated lactam (±)-44 with phosgene afforded the C-chloroiminium ion (±)-45 that was reacted with the MVK derivative 46 in the presence of triethylamine. The primary condensation products of this process were then reacted with trifluoroacetic acid (TFA) under ultrasonic irradiation conditions to afford cyclohexenone (±)-47, albeit in only 29% yield. Subjection of this last compound to reduction with lithium in liquid ammonia then gave the saturated equivalent (±)-48 stereoselectively. Compound (±)-48 was a key intermediate associated with the Speckamp [29] total synthesis (±)-dihydromaritidine that involved, as a key step, the regioselective reduction of imide (±)-49 to the carbinol-lactam (±)-50. Exposure of this last compound to formic acid gave, via cyclization of an in situ-generated α-acylimmonium ion with the pendant alkyne, the expected cyclohexanone annulated lactam. Selective protection of the associated ketone residue as the corresponding ethylene ketal, reductive cleavage of the lactam carbonyl, and deprotection of the cyclohexanone then provided compound (±)-48, which was selectively reduced under the conditions established by Stevens (cf (±)-37 → (±)-39 in Scheme 6), thus affording alcohol (±)-51. Carrying this compound forward, also under conditions established by Stevens, gave (±)-dihydromaritidine [(±)-52]. The Keck synthesis of (±)-crinane [(±)-1] [30,31] involved, as shown in Scheme 8, initial 1,2-reduction of the β-arylated cyclohexenone 53 and acetylation of the ensuing allylic alcohol to give ester (±)-54. This last compound was subject to an Ireland-Claisen rearrangement reaction, and the product acid (±)-55 thus obtained was converted into the corresponding hydroxamic acid (±)-56 under standard conditions. Compound (±)-56 was oxidized to its acylnitroso derivative (±)-57 using tetrapropylammonium periodate and then trapped in a Diels-Alder reaction with 9,10-dimethylanthracene (9,10-DMA). On heating the isolable and crystalline adduct of this reaction in refluxing toluene for 0.25 h, a cycloreversion reaction took place to regenerate compound (±)-57 that underwent, in situ, an intramolecular ene reaction, thus delivering the N-hydroxylactam (±)-58 embodying the ACD-ring system of the crinines. This "catch and release" protocol was necessary, because cyclic hydroxamic acids, of which (±)-58 is an example, are known to be unstable under oxidizing conditions (being converted into reactive acyl nitroxyl species). Conversion of compound (±)-58 into the corresponding acetate, hydrogenation of the cyclohexene double bond, and reductive cleavage of the acetate group using TiCl3 then gave lactam (±)-59, which was reduced to the cyclic amine (±)-12 using LiAlH4. While this last compound is an established precursor to crinane [(±)-1] (see Scheme 2), Keck and Webb showed that the necessary Pictet-Spengler cyclisation was best accomplished using Eschenmoser's salt rather than, for example, formaldehyde/HCl (95% vs 53% yield). Adaptations of this reaction sequence have provided a synthesis of (±)-dihydromaritidine [(±)-52]. The Keck synthesis of (±)-crinane [(±)-1] [30,31] involved, as shown in Scheme 8, initial 1,2-reduction of the β-arylated cyclohexenone 53 and acetylation of the ensuing allylic alcohol to give ester (±)-54. This last compound was subject to an Ireland-Claisen rearrangement reaction, and the product acid (±)-55 thus obtained was converted into the corresponding hydroxamic acid (±)-56 under standard conditions. Compound (±)-56 was oxidized to its acylnitroso derivative (±)-57 using tetrapropylammonium periodate and then trapped in a Diels-Alder reaction with 9,10-dimethylanthracene (9,10-DMA). On heating the isolable and crystalline adduct of this reaction in refluxing toluene for 0.25 h, a cycloreversion reaction took place to regenerate compound (±)-57 that underwent, in situ, an intramolecular ene reaction, thus delivering the N-hydroxylactam (±)-58 embodying the ACD-ring system of the crinines. This "catch and release" protocol was necessary, because cyclic hydroxamic acids, of which (±)-58 is an example, are known to be unstable under oxidizing conditions (being converted into reactive acyl nitroxyl species). Conversion of compound (±)-58 into the corresponding acetate, hydrogenation of the cyclohexene double bond, and reductive cleavage of the acetate group using TiCl 3 then gave lactam (±)-59, which was reduced to the cyclic amine (±)-12 using LiAlH 4 . While this last compound is an established precursor to crinane [(±)-1] (see Scheme 2), Keck and Webb showed that the necessary Pictet-Spengler cyclisation was best accomplished using Eschenmoser's salt rather than, for example, formaldehyde/HCl (95% vs 53% yield). Adaptations of this reaction sequence have provided a synthesis of (±)-dihydromaritidine [(±)-52]. In more recent work, Mori and co-workers [32] have employed a thermally-induced carbonyl-ene reaction as a key step in developing an asymmetric total synthesis of (+)crinamine (Scheme 9). Thus, the racemic allylic carbonate (±)-60 was subjected to reaction with the sulfonamide 61 in the presence of a palladium catalyst and the homochiral ligand S-BINAPO to afford the allylic sulfonamide 62, which was obtained in 99% ee. Cleavage of the associated acetal residue using ferric chloride on silica in acetone gave the aldehyde 63 that engaged in an intramolecular carbonyl ene reaction on heating at 230 °C in toluene. The resulting tricyclic alcohol 64 was acetylated under standard conditions to give the ester 65. Alyllic oxidation of the last compound using selenium dioxide afforded compound 66, and the mesylate derived from this was subjected to methanolysis, a process that proceeded largely with retention of configuration and thus providing methyl ether 67. Exposure of compound 67 to sodium naphthalenide resulted in cleavage of the tosyl group, and the amine so-revealed was treated with Eschenmoser's reagent. The ensuing Pictet-Spengler product was treated with methanolic potassium carbonate to afford (+)crinamine [(+)-68]. In more recent work, Mori and co-workers [32] have employed a thermally-induced carbonyl-ene reaction as a key step in developing an asymmetric total synthesis of (+)crinamine (Scheme 9). Thus, the racemic allylic carbonate (±)-60 was subjected to reaction with the sulfonamide 61 in the presence of a palladium catalyst and the homochiral ligand S-BINAPO to afford the allylic sulfonamide 62, which was obtained in 99% ee. Cleavage of the associated acetal residue using ferric chloride on silica in acetone gave the aldehyde 63 that engaged in an intramolecular carbonyl ene reaction on heating at 230 • C in toluene. The resulting tricyclic alcohol 64 was acetylated under standard conditions to give the ester 65. Alyllic oxidation of the last compound using selenium dioxide afforded compound 66, and the mesylate derived from this was subjected to methanolysis, a process that proceeded largely with retention of configuration and thus providing methyl ether 67. Exposure of compound 67 to sodium naphthalenide resulted in cleavage of the tosyl group, and the amine so-revealed was treated with Eschenmoser's reagent. The ensuing Pictet-Spengler product was treated with methanolic potassium carbonate to afford (+)-crinamine [(+) -68] A related sequence of reactions starting from allylic alcohol 66 provided (−)-haemanthidine (69) (Figure 3). In another notable demonstration of the capacity of pericyclic processes to establish the crinane framework, Padwa [33] has described a synthesis of compound (±)-1 using an intramolecular Diels-Alder (IMDA) reaction of furan-tethered styrene as the key step. So, as shown in Scheme 10, Suzuki-Miyaura cross-coupling of arylboronic acid 70 with bromoalkene 71 afforded the corresponding styrene alcohol that could be converted into the mesylate 72 under standard conditions. Reaction of this ester with the furanyl carbamate 73 in the presence of caesium carbonate then gave the furanylated styrene 74. Heating a toluene solution of this last compound at 180 °C in a sealed tube resulted in the anticipated IMDA reaction taking place with the initially formed adduct itself fragmenting to give the observed β,γ-unsaturated cyclohexanone (±)-75. Ionic hydrogenation of this last compound using di-t-butylmethylsilane (DTBMS-H) and TFA resulted in reduction of the C=C bond and the ketone carbonyl to give, after potassium carbonate-mediated cleavage of the intermediate and epimeric trifluoroacetates, a mixture of alcohols. These were then subjected to a Barton-McCombie (B-M) deoxygenation process and thus the affording compound (±)-76. Cleavage of the carbamate residue associated with the last compound was achieved using KOH, and the amine (±)-12 so-formed was converted into (±)-crinane [(±)-1] using Eschenmoser's salt.  In another notable demonstration of the capacity of pericy the crinane framework, Padwa [33] has described a synthesis of intramolecular Diels-Alder (IMDA) reaction of furan-tethered s as shown in Scheme 10, Suzuki-Miyaura cross-coupling of ary moalkene 71 afforded the corresponding styrene alcohol that co mesylate 72 under standard conditions. Reaction of this ester w 73 in the presence of caesium carbonate then gave the furanyla toluene solution of this last compound at 180 °C in a sealed tube IMDA reaction taking place with the initially formed adduct itse observed β,γ-unsaturated cyclohexanone (±)-75. Ionic hydrog pound using di-t-butylmethylsilane (DTBMS-H) and TFA result bond and the ketone carbonyl to give, after potassium carbonate intermediate and epimeric trifluoroacetates, a mixture of alcoh jected to a Barton-McCombie (B-M) deoxygenation process an pound (±)-76. Cleavage of the carbamate residue associated wi achieved using KOH, and the amine (±)-12 so-formed was conv 1] using Eschenmoser's salt. In another notable demonstration of the capacity of pericyclic processes to establish the crinane framework, Padwa [33] has described a synthesis of compound (±)-1 using an intramolecular Diels-Alder (IMDA) reaction of furan-tethered styrene as the key step. So, as shown in Scheme 10, Suzuki-Miyaura cross-coupling of arylboronic acid 70 with bromoalkene 71 afforded the corresponding styrene alcohol that could be converted into the mesylate 72 under standard conditions. Reaction of this ester with the furanyl carbamate 73 in the presence of caesium carbonate then gave the furanylated styrene 74. Heating a toluene solution of this last compound at 180 • C in a sealed tube resulted in the anticipated IMDA reaction taking place with the initially formed adduct itself fragmenting to give the observed β,γ-unsaturated cyclohexanone (±)-75. Ionic hydrogenation of this last compound using di-t-butylmethylsilane (DTBMS-H) and TFA resulted in reduction of the C=C bond and the ketone carbonyl to give, after potassium carbonate-mediated cleavage of the intermediate and epimeric trifluoroacetates, a mixture of alcohols. These were then subjected to a Barton-McCombie (B-M) deoxygenation process and thus the affording compound (±)-76. Cleavage of the carbamate residue associated with the last compound was achieved using KOH, and the amine (±)-12 so-formed was converted into (±)-crinane [(±)-1] using Eschenmoser's salt. An intramolecular [3+2] azide-olefin cycloaddition reaction has been employed by Pearson [34] as the key step in yet another synthesis of (±)-crinane [(±)-1]. In this work, the carboxylic acid (±)-55 associated with the Keck synthesis (Scheme 8) was reduced (Scheme 11) to the corresponding alcohol (±)-77 using LiAlH4. This alcohol was engaged in a Mitsunobu reaction to afford the unsaturated azide (±)-78. Simply heating this last compound in refluxing toluene promoted the anticipated addition reaction, thus affording, after nitrogen extrusion from the primary reaction product, the cyclic imine (±)-79. Diastereoselective reduction of this last compound gave the by now familiar C3a-arylperhydroindole (±)-12, which was readily converted, by the usual means, into (±)-crinane [(±)-1]. Scheme 11. The Pearson synthesis of (±)-crinane [(±)-1]. An intramolecular [3+2] azide-olefin cycloaddition reaction has been employed by Pearson [34] as the key step in yet another synthesis of (±)-crinane [(±)-1]. In this work, the carboxylic acid (±)-55 associated with the Keck synthesis (Scheme 8) was reduced (Scheme 11) to the corresponding alcohol (±)-77 using LiAlH 4 . This alcohol was engaged in a Mitsunobu reaction to afford the unsaturated azide (±)-78. Simply heating this last compound in refluxing toluene promoted the anticipated addition reaction, thus affording, after nitrogen extrusion from the primary reaction product, the cyclic imine (±)-79. Diastereoselective reduction of this last compound gave the by now familiar C3a-arylperhydroindole (±)-12, which was readily converted, by the usual means, into (±)-crinane [(±)-1]. An intramolecular [3+2] azide-olefin cycloaddition reaction has been employed by Pearson [34] as the key step in yet another synthesis of (±)-crinane [(±)-1]. In this work, the carboxylic acid (±)-55 associated with the Keck synthesis (Scheme 8) was reduced (Scheme 11) to the corresponding alcohol (±)-77 using LiAlH4. This alcohol was engaged in a Mitsunobu reaction to afford the unsaturated azide (±)-78. Simply heating this last compound in refluxing toluene promoted the anticipated addition reaction, thus affording, after nitrogen extrusion from the primary reaction product, the cyclic imine (±)-79. Diastereoselective reduction of this last compound gave the by now familiar C3a-arylperhydroindole (±)-12, which was readily converted, by the usual means, into (±)-crinane [(±)-1]. Scheme 11. The Pearson synthesis of (±)-crinane [(±)-1]. Scheme 11. The Pearson synthesis of (±)-crinane [(±)-1].
A related strategy was employed for assembling the ACD-ring system of the dihydroxylated crinine alkaloid (−)-amabiline [35][36][37]. This total synthesis started with the conversion (Scheme 12) of arylbromide 80 into the lithio-species 81 and its addition to the homochiral lactone 82. The resulting lactol 83 was subjected to a Wittig olefin reaction, and the product styrene-alcohol 84 converted into the corresponding triflate, which was itself reacted with the anion derived from deprotonation of N-(cyclohexyl)acetaldimine. Hydrolysis of the product so-formed under mildly acidic conditions then gave aldehyde 85. A Schiff base condensation between this last compound and (aminomethyl)tri-n-butylstannane then gave the crucial (2-azaallyl)stannane 86. Upon treatment of compound 86 with n-BuLi, this (presumably) formed the corresponding 2-azaallyl anion 87 that engaged in an intramolecular and diastereofacially selective [π4s + π2s] cycloadditon with the pendant styrene double-bond to afford adduct 88. This was readily converted, by sequential treatment with Eschenmoser's salt and then methanolic HCl, into (-)-amabiline (89). A related strategy was employed for assembling the ACD-ring system of the dihydroxylated crinine alkaloid (−)-amabiline [35][36][37]. This total synthesis started with the conversion (Scheme 12) of arylbromide 80 into the lithio-species 81 and its addition to the homochiral lactone 82. The resulting lactol 83 was subjected to a Wittig olefin reaction, and the product styrene-alcohol 84 converted into the corresponding triflate, which was itself reacted with the anion derived from deprotonation of N-(cyclohexyl)acetaldimine. Hydrolysis of the product so-formed under mildly acidic conditions then gave aldehyde 85. A Schiff base condensation between this last compound and (aminomethyl)tri-n-butylstannane then gave the crucial (2-azaallyl)stannane 86. Upon treatment of compound 86 with n-BuLi, this (presumably) formed the corresponding 2-azaallyl anion 87 that engaged in an intramolecular and diastereofacially selective [π4s + π2s] cycloadditon with the pendant styrene double-bond to afford adduct 88. This was readily converted, by sequential treatment with Eschenmoser's salt and then methanolic HCl, into (-)-amabiline (89). In an adaptation of the chemistry used by Pearson for the synthesis of (±)-crinane (Scheme 11) and the early stages of the Keck synthesis of the same (Scheme 8), Akai has used a combination of an oxovanadium complex and a lipase to effect the dynamic kinetic resolution of allylic acetate (±)-54 [38] and thereby establish a total synthesis of (−)-crinane [(−)-1].
A cationic aza-Cope rearrangement/Mannich cyclization sequence served as the pivotal process employed by Overman [39,40] in establishing a synthesis of (−)-crinine (Scheme 13). Thus, cyclopentene oxide (90) was reacted with the α-chiral 1°-amine 91 in the presence of trimethylaluminium to give a 1:1 mixture of amino-alcohol 92 (45%) and its diastereoisomer. These isomers were readily separated by conventional chromatographic methods, and the hydrochloride salt of compound 92 was treated with potassium In an adaptation of the chemistry used by Pearson for the synthesis of (±)-crinane (Scheme 11) and the early stages of the Keck synthesis of the same (Scheme 8), Akai has used a combination of an oxovanadium complex and a lipase to effect the dynamic kinetic resolution of allylic acetate (±)-54 [38] and thereby establish a total synthesis of (−)-crinane [(−)-1].
A cationic aza-Cope rearrangement/Mannich cyclization sequence served as the pivotal process employed by Overman [39,40] in establishing a synthesis of (−)-crinine (Scheme 13). Thus, cyclopentene oxide (90) was reacted with the α-chiral 1 • -amine 91 in the presence of trimethylaluminium to give a 1:1 mixture of amino-alcohol 92 (45%) and its diastereoisomer. These isomers were readily separated by conventional chromatographic methods, and the hydrochloride salt of compound 92 was treated with potassium cyanide then paraformaldehyde to give the α-aminonitrile 93. Swern oxidation of this last compound then gave the ketone 94, which was itself reacted in a diastereoselective manner with the styryl lithium 95 to give the key substrate 96. Treatment of compound 96 with silver nitrate then gave, presumably via the initially formed iminium ion 97 that engages in an aza-Cope rearrangement/Mannich cyclization, compound 98. The chiral auxiliary associated with the last compound was cleaved using transfer hydrogenolysis techniques to give ketone (−)-31, the racemic form of which served as a late-stage intermediate in the Whitlock synthesis of (±)-crinine. Accordingly, the homochiral material was carried forward in the same manner to give, via enone (−)- 33  A distinctly different means of forming the CD-ring system of the crinines was employed by Overman in establishing a synthesis of (±)-3-epi-elwesine [41,42]. As shown in Scheme 14, the arylated acetonitrile 99 was alkylated using the bromide 100 in the presence of lithium diethylamide (LDA) to give product (±)-101, which was itself subjected to alkylation using bromide 102 as the electrophile. The nitrile group associated with the product of this process, (±)-103, was then reduced with i-Bu2AlH (DIBAl-H), and the resulting N-metallated imine reacted, in situ, with the tethered alkyl chloride to give the cyclic imine (±)-104. On treatment of the last compound with TFA, the derived iminium ion reacted, in a cationic cyclization process, with the pendant, Z-configured alkenylsilane to give the tricyclic product (±)-105 (this conversion is reminiscent of the conversion (±)-50 → (±)-48 employed in the Speckamp synthesis of (±)-dihydromaritidine [(±)-52]-see Scheme 7}). Oxymercuration of the cyclohexenyl double bond within compound (±)-105 proceeded both regio-and diastereo-selectively to give, after demercuration, alcohol (±)- A distinctly different means of forming the CD-ring system of the crinines was employed by Overman in establishing a synthesis of (±)-3-epi-elwesine [41,42]. As shown in Scheme 14, the arylated acetonitrile 99 was alkylated using the bromide 100 in the presence of lithium diethylamide (LDA) to give product (±)-101, which was itself subjected to alkylation using bromide 102 as the electrophile. The nitrile group associated with the product of this process, (±)-103, was then reduced with i-Bu 2 AlH (DIBAl-H), and the resulting N-metallated imine reacted, in situ, with the tethered alkyl chloride to give the cyclic imine (±)-104. On treatment of the last compound with TFA, the derived iminium ion reacted, in a cationic cyclization process, with the pendant, Z-configured alkenylsilane to give the tricyclic product (±)-105 (this conversion is reminiscent of the conversion (±)-50 → (±)-48 employed in the Speckamp synthesis of (±)-dihydromaritidine [(±)-52]-see Scheme 7}). Oxymercuration of the cyclohexenyl double bond within compound (±)-105 proceeded both regio-and diastereo-selectively to give, after demercuration, alcohol (±)-40, an advanced intermediate associated with Steven's synthesis of (±)-3-epi-elwesine [(±)-41] Radical cyclization reactions have also featured as key steps in the assembly of the CD-ring system of the crinane alkaloids. So, for example, in 1991, Ishibashi reported [43] a synthesis of (±)-elwesine [(±)-43] (Scheme 15) that commenced with the addition of the aryl Grignard 106 to the 4-substituted cyclohexanone 107 and dehydration of the resulting 3°-alcohol to give styrene (±)-108. Treatment of this last compound with N-bromosuccinimide (NBS) in wet acetonitrile gave, as the major product of reaction, bromohydrin (±)-109, and this compound was subjected to an acid-catalyzed dehydration reaction, and the ensuing allylic bromide then reacted with benzylamine to afford the 3°-amine (±)-110 as the major product of reaction. Acylation of compound (±)-110 with dichloroacetyl chloride then gave amide (±)-111 that, upon reaction with tri-n-butylstannane in the presence of the radical initiator azobisisobutyronitrile (AIBN), engaged in a 5-exo-trig radical cyclization reaction and then (presumably) a subsequent radical dechlorination reaction to give lactam (±)-112 in modest yield. Reductive cleavage of the carbonyl unit associated with the last compound was achieved using diborane, and the two benzyl groups in product (±)-113 were cleaved under hydrogenolytic conditions to afford the amino-alcohol (±)-42, the immediate precursor to (±)-elwesine [(±)-43] associated with the Steven's synthesis (Scheme 6) of the same target. Radical cyclization reactions have also featured as key steps in the assembly of the CD-ring system of the crinane alkaloids. So, for example, in 1991, Ishibashi reported [43] a synthesis of (±)-elwesine [(±)-43] (Scheme 15) that commenced with the addition of the aryl Grignard 106 to the 4-substituted cyclohexanone 107 and dehydration of the resulting 3 •alcohol to give styrene (±)-108. Treatment of this last compound with N-bromosuccinimide (NBS) in wet acetonitrile gave, as the major product of reaction, bromohydrin (±)-109, and this compound was subjected to an acid-catalyzed dehydration reaction, and the ensuing allylic bromide then reacted with benzylamine to afford the 3 • -amine (±)-110 as the major product of reaction. Acylation of compound (±)-110 with dichloroacetyl chloride then gave amide (±)-111 that, upon reaction with tri-n-butylstannane in the presence of the radical initiator azobisisobutyronitrile (AIBN), engaged in a 5-exo-trig radical cyclization reaction and then (presumably) a subsequent radical dechlorination reaction to give lactam (±)-112 in modest yield. Reductive cleavage of the carbonyl unit associated with the last compound was achieved using diborane, and the two benzyl groups in product (±)-113 were cleaved under hydrogenolytic conditions to afford the amino-alcohol (±)-42, the immediate precursor to (±)-elwesine [(±)-43] associated with the Steven's synthesis (Scheme 6) of the same target. A closely related approach to crinane has been reported [44] by Nagashima et al. who employed, as the key step ( Figure 4), a Cu(I)-catalyzed atom-transfer reaction of trichloroacetamide (±)-114 that afforded the isomeric lactam (±)-115. This process was presumed to proceed via a radical cyclization pathway. In our own research, we have established an alternative 5-exo-trig-based radical cyclization pathway to (±)-crinane [(±)-1]. This starts (Scheme 16) [45] with the thermallyinduced electrocyclic ring-opening of the ring-fused gem-dibromocyclopropane 116 and trapping of the resulting ring-expanded π-allyl cation by benzylamine and so affording the allylic amine (±)-117. Conversion of the latter compound, under standard conditions, into the Boc-protected derivative (±)-118 followed by cross-coupling of this with aryl boronic acid 119 under Suzuki-Miyaura conditions then afforded the anticipated product (±)-120. Treatment of this intermediate with TFA resulted in Boc-group cleavage to deliver the 2°-amine (±)-121. N-Alkylation of compound (±)-121 with ethylene oxide afforded the amino-alcohol (±)-122, which was mesylated in situ and the resulting ester subjected to a Finkelstein reaction to give iodide (±)-123. In the pivotal step of the reaction sequence, this halide was treated with Bu3SnH and AIBN in hot toluene to promote a 5-exo-trig radical cyclization and thereby generate the C3a-arylperhydroindole (±)-124 albeit rather inefficiently. Hydrogenolytic cleavage of the benzyl residue associated with this product afforded compound (±)-12 that was readily converted into (±)-crinane [(±)-1] on treatment with formaldehyde in the presence of formic acid. A closely related approach to crinane has been reported [44] by Nagashima et al. who employed, as the key step ( Figure 4), a Cu(I)-catalyzed atom-transfer reaction of trichloroacetamide (±)-114 that afforded the isomeric lactam (±)-115. This process was presumed to proceed via a radical cyclization pathway. A closely related approach to crinane has been reported [44] by Nagashim employed, as the key step ( Figure 4), a Cu(I)-catalyzed atom-transfer reactio roacetamide (±)-114 that afforded the isomeric lactam (±)-115. This process wa to proceed via a radical cyclization pathway. The key step associated with Nagashima's formal synthesis of (±)-crinane [(± In our own research, we have established an alternative 5-exo-trig-based clization pathway to (±)-crinane [(±)-1]. This starts (Scheme 16) [45] with the induced electrocyclic ring-opening of the ring-fused gem-dibromocyclopropa trapping of the resulting ring-expanded π-allyl cation by benzylamine and s the allylic amine (±)-117. Conversion of the latter compound, under standard into the Boc-protected derivative (±)-118 followed by cross-coupling of this w ronic acid 119 under Suzuki-Miyaura conditions then afforded the anticipa (±)-120. Treatment of this intermediate with TFA resulted in Boc-group cleavag the 2°-amine (±)-121. N-Alkylation of compound (±)-121 with ethylene oxide a amino-alcohol (±)-122, which was mesylated in situ and the resulting ester su Finkelstein reaction to give iodide (±)-123. In the pivotal step of the reaction se halide was treated with Bu3SnH and AIBN in hot toluene to promote a 5-exo cyclization and thereby generate the C3a-arylperhydroindole (±)-124 albeit r ciently. Hydrogenolytic cleavage of the benzyl residue associated with this forded compound (±)-12 that was readily converted into (±)-crinane [(±)-1] o with formaldehyde in the presence of formic acid. In our own research, we have established an alternative 5-exo-trig-based radical cyclization pathway to (±)-crinane [(±)-1]. This starts (Scheme 16) [45] with the thermally-induced electrocyclic ring-opening of the ring-fused gem-dibromocyclopropane 116 and trapping of the resulting ring-expanded π-allyl cation by benzylamine and so affording the allylic amine (±)-117. Conversion of the latter compound, under standard conditions, into the Boc-protected derivative (±)-118 followed by cross-coupling of this with aryl boronic acid 119 under Suzuki-Miyaura conditions then afforded the anticipated product (±)-120. Treatment of this intermediate with TFA resulted in Boc-group cleavage to deliver the 2 • -amine (±)-121. N-Alkylation of compound (±)-121 with ethylene oxide afforded the amino-alcohol (±)-122, which was mesylated in situ and the resulting ester subjected to a Finkelstein reaction to give iodide (±)-123. In the pivotal step of the reaction sequence, this halide was treated with Bu 3 SnH and AIBN in hot toluene to promote a 5-exo-trig radical cyclization and thereby generate the C3a-arylperhydroindole (±)-124 albeit rather inefficiently. Hydrogenolytic cleavage of the benzyl residue associated with this product afforded compound (±)-12 that was readily converted into (±)-crinane [(±)-1] on treatment with formaldehyde in the presence of formic acid. α-Arylated cyclohexanones have proven to be useful precursors to the corresponding perhydroindoles required for the total synthesis of a range of crinine-type alkaloids and/or the parent framework (±)-1. An early illustration of the value of such precursors was provided by Tu [46], as shown in Scheme 17. Reaction of aryl lithium 125 with cyclohexene oxide (126) in the presence of BF3•Et2O afforded the anticipated product alcohol that could be oxidized to the ketone 127 using pyridinium chlorochromate (PCC). Conversion of this last compound into the corresponding silyl enol ether 128 under relatively standard conditions followed by treatment with methyl lithium and then nitroethylene afforded the Michael-type adduct 129. Exposure of this compound to Raney-Nickel gave, via a reductive cyclization pathway, the cyclic imine (±)-79, a key intermediate associated with the Pearson synthesis of (±)-crinane (see Scheme 11). Reduction of the last compound afforded the corresponding 2°-amine (±)-12, which was treated with Eschenmoser's salt to yield the target compound (±)-1. α-Arylated cyclohexanones have proven to be useful precursors to the corresponding perhydroindoles required for the total synthesis of a range of crinine-type alkaloids and/or the parent framework (±)-1. An early illustration of the value of such precursors was provided by Tu [46], as shown in Scheme 17. Reaction of aryl lithium 125 with cyclohexene oxide (126) in the presence of BF 3 •Et 2 O afforded the anticipated product alcohol that could be oxidized to the ketone 127 using pyridinium chlorochromate (PCC). Conversion of this last compound into the corresponding silyl enol ether 128 under relatively standard conditions followed by treatment with methyl lithium and then nitroethylene afforded the Michael-type adduct 129. Exposure of this compound to Raney-Nickel gave, via a reductive cyclization pathway, the cyclic imine (±)-79, a key intermediate associated with the Pearson synthesis of (±)-crinane (see Scheme 11). Reduction of the last compound afforded the corresponding 2 • -amine (±)-12, which was treated with Eschenmoser's salt to yield the target compound (±)-1.
The keto-aldehyde (−)-133 has also featured in the synthesis of (−)-crinane reported by Wang [53], who has used the same methodology to establish a total synthesis of the naturally-occurring alkaloid (-)-4a-dehydroxycrinamabine. Details of the latter work are presented in Scheme 21. The pivotal and opening step involved an asymmetric Tsuji-Trost reaction employing the readily accessible styrene 146 (mixture of isomers) as the substrate and allylB(pin) as the nucleophile. When the reaction was carried out with a suitable chiral ligand and in the presence of caesium fluoride, then diene (−)-147 was obtained in 94% ee. Allylic oxidation of compound (−)-147 then provided enone (−)-148 and conjugate addition of vinylmagnesium bromide to the latter afforded diene (−)-149. Subjection of this last compound to a ring-closing metathesis (RCM) using the Grubbs' II catalyst afforded cyclohexenone (−)-150, which upon exposure to hydrogen in the presence of Pd on C was converted into the saturated alcohol (−)-151. Oxidation of the latter compound using the The Basai group has also reported [51,52] a synthesis of (±)-crinane that involves 1,2-reduction of enone 53 (Scheme 8) to the corresponding allylic alcohol, engagement of this intermediate in an Eschenmoser-Claisen rearrangement, and conversion, using conventional manipulations, of the resulting unsaturated amide into keto-aldehyde (±)-133 (Scheme 18). This last compound was finally converted into target (±)-1 using the same protocols employed by Maruoka and List (Schemes 18 and 19, respectively).
The keto-aldehyde (−)-133 has also featured in the synthesis of (−)-crinane reported by Wang [53], who has used the same methodology to establish a total synthesis of the naturally-occurring alkaloid (-)-4a-dehydroxycrinamabine. Details of the latter work are presented in Scheme 21. The pivotal and opening step involved an asymmetric Tsuji-Trost reaction employing the readily accessible styrene 146 (mixture of isomers) as the substrate and allylB(pin) as the nucleophile. When the reaction was carried out with a suitable chiral ligand and in the presence of caesium fluoride, then diene (−)-147 was obtained in 94% ee. Allylic oxidation of compound (−)-147 then provided enone (−)-148 and conjugate addition of vinylmagnesium bromide to the latter afforded diene (−)-149. Subjection of this last compound to a ring-closing metathesis (RCM) using the Grubbs' II catalyst afforded cyclohexenone (−)-150, which upon exposure to hydrogen in the presence of Pd on C was converted into the saturated alcohol (−)-151. Oxidation of the latter compound using the Ring-closing metathesis served as a pivotal step in the Raghavan synthesis of (±)crinane [(±)-1] [54], which started, as shown in Scheme 22, with the two-fold, base-promoted alkylation of nitrile 99, using (5-iodopent-1-en-3-yl)(phenyl)sulfane and N-tosylaziridine as the electrophiles. Product (±)-153 was thereby obtained as a mixture of diastereoisomers, and the associated nitrile residue was reduced with DIBAl-H to give, after hydrolysis, the corresponding aldehyde that was itself subject to a Wittig olefination reaction, thus forming the diene (±)-154. Subjection of this last compound to an RCM reaction using the Grubbs' II catalyst then gave the cyclohexene (±)-155, which was engaged in an intramolecular SN′ reaction, with the sulfide residue being activated toward displacement by the sulfonamide nitrogen through initial m-chloroperbenzoic acid (m-CPBA)-mediated oxidation at sulfur. The product sulfoxides were then treated with triflic anhydride (Tf2O) in 2,6-lutidine to give hexahydroindole (±)-156. The tosyl group associated with this last compound was cleaved using sodium naphthalenide and the cyclohexene C=C bond then reduced under conventional conditions to deliver the C3a-aryl perhydroindole (±)-12. Pictet-Spengler cyclization of compound (±)-12 was achieved using formaldehyde in the presence of HCl, thus affording (±)-crinane [(±)-1] in 68% yield. Ring-closing metathesis served as a pivotal step in the Raghavan synthesis of (±)crinane [(±)-1] [54], which started, as shown in Scheme 22, with the two-fold, basepromoted alkylation of nitrile 99, using (5-iodopent-1-en-3-yl)(phenyl)sulfane and Ntosylaziridine as the electrophiles. Product (±)-153 was thereby obtained as a mixture of diastereoisomers, and the associated nitrile residue was reduced with DIBAl-H to give, after hydrolysis, the corresponding aldehyde that was itself subject to a Wittig olefination reaction, thus forming the diene (±)-154. Subjection of this last compound to an RCM reaction using the Grubbs' II catalyst then gave the cyclohexene (±)-155, which was engaged in an intramolecular S N reaction, with the sulfide residue being activated toward displacement by the sulfonamide nitrogen through initial m-chloroperbenzoic acid (m-CPBA)-mediated oxidation at sulfur. The product sulfoxides were then treated with triflic anhydride (Tf 2 O) in 2,6-lutidine to give hexahydroindole (±)-156. The tosyl group associated with this last compound was cleaved using sodium naphthalenide and the cyclohexene C=C bond then reduced under conventional conditions to deliver the C3a-aryl perhydroindole (±)-12. Pictet-Spengler cyclization of compound (±)-12 was achieved using formaldehyde in the presence of HCl, thus affording (±)-crinane [(±)-1] in 68% yield. Umezawa and co-workers have also described [56] syntheses of elwesine [(±)-43] and 3-epi-elwesine [(±)-41]. Their route (Scheme 24) involved, as a key step, the alkylation of the α-arylated cyclohexane-1,4-dione monoethylene acetal (±)-163 with allyl bromide using 50% aq. NaOH in the presence of 18-C-6. The product ketone (±)-164 was stereoselectively reduced, using NaBH4, to the corresponding unsaturated alcohol that was itself acetylated under standard conditions. The double bond in the resulting ester was then subjected to oxidative cleavage, thus delivering the ester-aldehyde (±)-165. Reductive amination of this last compound using benzylamine in the presence of NaBH4 then gave, after treatment of the crude reaction product with aqueous HCl, the ketone (±)-166. Reduction, with LiAlH4, then delivered the corresponding and chromatographically separable epimeric alcohols, (±)-167 and (±)-168, the acetate derivatives of which were subjected to hydrogenolytic cleavage using hydrogen in the presence of PdCl2 with methanol as solvent. Umezawa and co-workers have also described [56] syntheses of elwesine [(±)-43] and 3-epi-elwesine [(±)-41]. Their route (Scheme 24) involved, as a key step, the alkylation of the α-arylated cyclohexane-1,4-dione monoethylene acetal (±)-163 with allyl bromide using 50% aq. NaOH in the presence of 18-C-6. The product ketone (±)-164 was stereoselectively reduced, using NaBH 4 , to the corresponding unsaturated alcohol that was itself acetylated under standard conditions. The double bond in the resulting ester was then subjected to oxidative cleavage, thus delivering the ester-aldehyde (±)-165. Reductive amination of this last compound using benzylamine in the presence of NaBH 4 then gave, after treatment of the crude reaction product with aqueous HCl, the ketone (±)-166. Reduction, with LiAlH 4 , then delivered the corresponding and chromatographically separable epimeric alcohols, (±)-167 and (±)-168, the acetate derivatives of which were subjected to hydrogenolytic cleavage using hydrogen in the presence of PdCl 2 with methanol as solvent. Subjection of the products of this process to separate Pictet-Spengler reactions then gave elwesine A synthesis of (±)-crinane using a Lewis-acid promoted rearrangement of a 2,3aziridino alcohol has been reported by Tu [57] (Scheme 25). Thus, successive treatment of chlorocyclohexene 170 with lithium and piperonal followed by reaction of the ensuing allylic alcohol with chloramine-T (TsNClNa) and phenyltrimethylammonium tribromide (PTAB) afforded the 2,3-aziridino alcohol (±)-171. Upon exposure of this intermediate to zinc bromide, a smooth rearrangement took place to afford the isomeric aldehyde (±)-172. Wittig reaction of this last compound afforded the enol ether (±)-173 and upon treatment of this product with aqueous perchloric acid in diethyl ether, hydrolysis then cyclization took place to give the 2-pyrrolidinol (±)-174. Reaction of this last compound with NaAlH2(OCH2CH2OCH3)2 (Red-Al) at elevated temperatures resulted in reductive cleavage of both the hydroxyl and tosyl residues to afford the C3a-arylated perhydroindole (±)-12, a well-established precursor to (±)-crinane [(±)-1)]. A synthesis of (±)-crinane using a Lewis-acid promoted rearrangement of a 2,3aziridino alcohol has been reported by Tu [57] (Scheme 25). Thus, successive treatment of chlorocyclohexene 170 with lithium and piperonal followed by reaction of the ensuing allylic alcohol with chloramine-T (TsNClNa) and phenyltrimethylammonium tribromide (PTAB) afforded the 2,3-aziridino alcohol (±)-171. Upon exposure of this intermediate to zinc bromide, a smooth rearrangement took place to afford the isomeric aldehyde (±)-172. Wittig reaction of this last compound afforded the enol ether (±)-173 and upon treatment of this product with aqueous perchloric acid in diethyl ether, hydrolysis then cyclization took place to give the 2-pyrrolidinol (±)-174. Reaction of this last compound with NaAlH 2 (OCH 2 CH 2 OCH 3 ) 2 (Red-Al) at elevated temperatures resulted in reductive cleavage of both the hydroxyl and tosyl residues to afford the C3a-arylated perhydroindole (±)-12, a well-established precursor to (±)-crinane [(±)-1)]. Scheme 25. Tu's synthesis of (±)-crinane via the Lewis acid-promoted rearrangement of a 2,3aziridino alcohol.
Arylated 2-pyrrolidinols feature in the syntheses of (±)-powelline and (±)-buphanidrine reported by Dixon and co-workers [58,59]. The pivotal and opening feature of the reaction sequence (Scheme 26) was the oxidative coupling of catechol 175 with the acylated and N-Boc protected lactam (±)-176 using polymer supported (PS) periodate in the presence of the similarly supported base 2-t-butylimino-2-diethylami -no-1,3-dimethylperhydro-1,3,2-diaza-phosphorine (BEMP). By this means and after alkylation of the product catechol with bromochloromethane (to install the methylenedioxy unit), the arylated lactam (±)-177 was obtained. Reduction of the lactam carbonyl moiety within compound (±)-177 then gave the arylated 2-pyrrolidinol (±)-178, which could be alkylated with the TMS-enol ether of acetone in the presence of a Lewis acid to afford the methyl ketone (±)-179. This keto-ester was engaged in a Dieckmann-type cyclization using potassium t-butoxide, and the product cyclohexane-1,3-dione reacted with methanol in the presence of TiCl 4 to give the β-methoxy-substituted cyclohexenone (±)-180 that was itself reduced with DIBAl-H and, after acidic work-up, yielded the new enone (±)-181. Stereoselective 1,2-reduction of this last compound was achieved using L-selectride, and the Boc group associated with the product allylic alcohol (±)-181 was cleaved using TFA to give the 2 • -amine (±)-182. Subjection of this last compound to a Pictet-Spengler reaction using aqueous formaldehyde in methanol followed by treatment with 6 M aqueous HCl then gave a mixture of (±)-powelline [(±)-183] and its regio-isomeric cyclization product (±)-184. The synthesis of (±)-buphanidrine involved (Scheme 26)  Cho's synthesis of (±)-crinamine [60] is distinctive because of the less "obvious" nature of the starting materials and the capacity it provides to introduce oxygenation at the enthano-bridge of the crinane framework, a structural feature encountered in a range of such natural products including (±)-crinamine [compound (±)-68, see Scheme 9]. The reaction sequence used is shown in Scheme 27 and starts with the Stille cross-coupling of stannane 188 with the dibromo-α-pyrone 189, followed by engagement of the product 190 in an inverse electron-demand Diels-Alder reaction with the enol ether 191 to afford the endo-adduct (±)-192 as the major product of reaction. Cleavage of the lactone bridge within the last compound was effected using sodium methoxide and the product hydroxyl-ester (±)-193 was O-methylated to give ether (±)-194. Lithium aluminium hydride-mediated reduction of the associated ester group gave the corresponding alcohol, which was converted into aldehyde (±)-195 on reaction with DMP. Reaction of this last compound with the anion derived from di-iodomethane and methyl lithium then gave epoxide (±)-196. This was opened with sodium azide and the product azido-alcohol protected as the corresponding MOM-ether (±)-197. A Staudinger reaction followed by protection of the product amine as its Boc-derivative then gave compound (±)-198 that was itself treated with TBAF and the resulting alcohol oxidized to ketone (±)-199 using DMP. A transannular reductive amination, to install what would become the ethano-bridge in the final product, Cho's synthesis of (±)-crinamine [60] is distinctive because of the less "obvious" nature of the starting materials and the capacity it provides to introduce oxygenation at the enthano-bridge of the crinane framework, a structural feature encountered in a range of such natural products including (±)-crinamine [compound (±)-68, see Scheme 9]. The reaction sequence used is shown in Scheme 27 and starts with the Stille cross-coupling of stannane 188 with the dibromo-α-pyrone 189, followed by engagement of the product 190 in an inverse electron-demand Diels-Alder reaction with the enol ether 191 to afford the endo-adduct (±)-192 as the major product of reaction. Cleavage of the lactone bridge within the last compound was effected using sodium methoxide and the product hydroxyl-ester (±)-193 was O-methylated to give ether (±)-194. Lithium aluminium hydride-mediated reduction of the associated ester group gave the corresponding alcohol, which was converted into aldehyde (±)-195 on reaction with DMP. Reaction of this last compound with the anion derived from di-iodomethane and methyl lithium then gave epoxide (±)-196. This was opened with sodium azide and the product azido-alcohol protected as the corresponding MOM-ether (±)-197. A Staudinger reaction followed by protection of the product amine as its Boc-derivative then gave compound (±)-198 that was itself treated with TBAF and the resulting alcohol oxidized to ketone (±)-199 using DMP. A transannular reductive amination, to install what would become the ethano-bridge in the final product, was then achieved by sequential treatment of the last compound with zinc bromide and then lithium aluminium hydride to produce the C3a-arylated perhydroindole (±)-200. A Pictet-Spengler reaction followed, thus producing the bromo-derivative, (±)-201, of the final target. A radical-based reductive debromination reaction using tri-n-butyltin hydride in the presence of AIBN then gave (±)-crinamine [(±)-68]. Using closely related chemistry, Cho and his co-workers could exploit compound (±)-193 in syntheses of (±)-crinine [(±)-26] and (±)-11-epi-crinamine (structure not shown).
Pandey and co-workers have also employed Diels-Alder-derived and bridged bicyclic compounds as starting materials in the synthesis of certain crinine alkaloids [61]. The starting point for their work was the homochiral 7-azabicyclo[2. Findlay established a chemoenzymatic total synthesis of (+)-amabiline [(+)-89] by the pathway shown in Scheme 29 [62]. This started with the homochiral acetonide 206 itself being generated from the corresponding diol (cis-1,2-dihydrocatechol) that is available in kilogram quantities through a whole-cell biotransformation of bromobenzene involving the toluene dioxygenase (TDO) enzyme [63]. Regio-and stereo-selective dihydroxylation Findlay established a chemoenzymatic total synthesis of (+)-amabiline [(+)-89] by the pathway shown in Scheme 29 [62]. This started with the homochiral acetonide 206 itself being generated from the corresponding diol (cis-1,2-dihydrocatechol) that is available in kilogram quantities through a whole-cell biotransformation of bromobenzene involving the toluene dioxygenase (TDO) enzyme [63]. Regio-and stereo-selective dihydroxylation of compound 206 gave the conduritol 207, the hydroxyl groups of which could be selectively protected to form compound 208. This last compound served as a substrate for a Suzuki-Miyaura cross coupling reaction with the commercially available benzo[d] [1,3]dioxol-5-ylboronic acid (119), thus providing compound 209. Reaction of the TBS ether-containing compound 209 with TBAF afforded the corresponding allylic alcohol 210, which readily participated in an Eschenmoser-Claisen rearrangement reaction to afford amide 211. Upon reduction of this amide and treatment of the product alcohol with iodine in the presence of triphenylphosphine, then halide 212 was obtained, and this was converted into the corresponding azide 213 under standard conditions. Reaction of this last compound with 2,3-dichloro-5,6-dicyano -1,4-benzoquinone (DDQ) resulted in cleavage of the p-methoxybenzyl (PMB) group, and the ensuing alcohol was then converted into the corresponding mesylate under standard conditions. The azide group associated with this ester was subjected to a Staudinger reaction using triphenylphosphine in aqueous THF and the 1 • -amine so-formed engaged in spontaneous S N reaction to generate compound 214 that served as a substrate for a Pictet-Spengler reaction. Under the conditions used, the acetonide moiety associated with this substrate was also cleaved, and the hydroxyl groups so revealed were formylated to generate the diester 215. Exposure of a methanolic solution of this last compound to hydrogen in the presence of both palladium on carbon and potassium carbonate resulted in concurrent reduction of the cyclohexene double-bond and cleavage of the ester moieties and thereby delivering (+)-amabiline [(+)-89].  (119), thus providing compound 209. Reaction of the TBS ether-co taining compound 209 with TBAF afforded the corresponding allylic alcohol 210, whic readily participated in an Eschenmoser-Claisen rearrangement reaction to afford amid 211. Upon reduction of this amide and treatment of the product alcohol with iodine in th presence of triphenylphosphine, then halide 212 was obtained, and this was converte into the corresponding azide 213 under standard conditions. Reaction of this last com pound with 2,3-dichloro-5,6-dicyano -1,4-benzoquinone (DDQ) resulted in cleavage of th p-methoxybenzyl (PMB) group, and the ensuing alcohol was then converted into the co responding mesylate under standard conditions. The azide group associated with this e ter was subjected to a Staudinger reaction using triphenylphosphine in aqueous THF an the 1°-amine so-formed engaged in spontaneous SN′ reaction to generate compound 2 that served as a substrate for a Pictet-Spengler reaction. Under the conditions used, th acetonide moiety associated with this substrate was also cleaved, and the hydroxyl group so revealed were formylated to generate the diester 215. In a related chiron-based approach, Chida has reported [64] syntheses of (+)-vittatin and (+)-haemanthamine from D-glucose. The first phase of this approach involved th In a related chiron-based approach, Chida has reported [64] syntheses of (+)-vittatine and (+)-haemanthamine from D-glucose. The first phase of this approach involved the conversion of methyl 4,6-O-benzylidene-α-D-glucopyranoside (216) (Scheme 30), a material available from multiple commercial suppliers, over eight steps including a Ferrier carbocy-clization, into the homo-chiral enone 217. Addition of the Grignard reagent derived from 5-bromobenzo[d] [1,3]dioxole to the carbonyl group of compound 217 and treatment of the resulting 3 • -alcohol with pyridinium chlorochromate (PCC), resulting in a Dauben-Michno oxidative rearrangement, gave the β-arylated enone 218. This intermediate was subjected to stereoselective Luche reduction, thus affording allylic alcohol 219, which could then be engaged in a Johnson-Claisen rearrangement, thus delivering ester 220. Reduction of the last compound using DIBAl-H gave the alcohol 221, which was engaged in a Mitsunobu reaction using t-butyl tosylcarbamate as the nucleophile. The product 222 so-formed was then reduced with sodium naphthalenide to give the Boc-protected amine 223. An intramolecular amino-mercuration/de-mercuration protocol was then employed to assemble the C3a-arylatedperhydroindole 224. The xanthate ester derived from the alcohol associated with the last compound was subjected to a pyrolytic syn-elimination reaction, and the carbamate residue embodied within the product olefin 225 cleaved with BF 3   (+)-Vittatine [(+)-137] was also synthesized by Fan [65] us ganocatalytic Michael addition reaction as the opening and k quence (Scheme 31). Thus, Michael addition of compound 227 ence of a quinidine-derived organo-catalyst afforded adduct 2 be raised to 99% through recrystallization. Subjection of this pr Dieckmann-type condensation and treatment of the res TsOH•H2O in the presence of methanol afforded the enone 230 followed by acid treatment gave compound 231. The associate compound was then protected as the corresponding ethylene ated reduction of the nitrile unit within compound 232 gave, af 233, and reaction of this product with nitromethane in the pres a nitro-alcohol that was dehydrated through treatment with m the presence of triethylamine. The nitro-olefin 234 so formed sponding 1°-amine 235, and upon treatment of this with aque took place, and the resulting enone reacted with the pendant pected C3a-arylated perhydroindole that was itself treated wit 236. Dehydrogenation of the cyclohexanone unit within compo der Saegusa-Ito conditions, and the enone so formed reduce selectride to give allylic alcohol 238 as the major product (58% rated from its chromatographically less polar epimer (obtained the Boc-group within compound 238 was achieved using TFA suing 2°-amine to a Pictet-Spengler reaction then gave (+)-3-ep an analogous two-step process applied to the epimer afforded Additionally, when the mesylates derived from the mixture of imer were subjected to methanolysis and the resulting allylic e lowed by formaldehyde and aqueous HCl, then (+)-buphanisin reoselectively and in good overall yield. (+)-Vittatine [(+)-137] was also synthesized by Fan [65] using an enantioselective organocatalytic Michael addition reaction as the opening and key step of the reaction sequence (Scheme 31). Thus, Michael addition of compound 227 to acrylate 228 in the presence of a quinidine-derived organo-catalyst afforded adduct 229 in 85% ee, which could be raised to 99% through recrystallization. Subjection of this product to a basepromoted Dieckmann-type condensation and treatment of the resulting 1,3-diketone with TsOH•H 2 O in the presence of methanol afforded the enone 230, Luche reduction of which followed by acid treatment gave compound 231. The associated ketone group of the last compound was then protected as the corresponding ethylene ketal 232. DIBAl-H-mediated reduction of the nitrile unit within compound 232 gave, after work-up, the aldehyde 233, and reaction of this product with nitromethane in the presence of triethylamine gave a nitro-alcohol that was dehydrated through treatment with methanesulfonyl chloride in the presence of triethylamine. The nitro-olefin 234 so formed was reduced to the corresponding 1 • -amine 235, and upon treatment of this with aqueous acid, ketal hydrolysis took place, and the resulting enone reacted with the pendant amine unit to give the expected C3a-arylated perhydroindole that was itself treated with Boc 2 O to give carbamate 236. Dehydrogenation of the cyclohexanone unit within compound 236 was achieved under Saegusa-Ito conditions, and the enone so formed reduced in a 1,2-manner with L-selectride to give allylic alcohol 238 as the major product (58%), which was readily separated from its chromatographically less polar epimer (obtained in 40% yield). Cleavage of the Boc-group within compound 238 was achieved using TFA, and subjection of the ensuing 2 • -amine to a Pictet-Spengler reaction then gave (+)-3-epi-vittatine [(+)-239], while an analogous two-step process applied to the epimer afforded (+)-vittatine [(+)-137] itself. Additionally, when the mesylates derived from the mixture of compound 238 and its epimer were subjected to methanolysis and the resulting allylic ether treated with TFA followed by formaldehyde and aqueous HCl, then (+)-buphanisine [(+)-2] was obtained stereoselectively and in good overall yield. The based-catalysed intramolecular hydroamination of 1-ethylaminocyclohexa -2,5dienes developed by Landais [66] has provided a useful method for the assembly of the crinine alkaloid framework as exemplified by the synthesis of (+)-3-epi-elwesine [(+)-41] (Scheme 32). Thus, the arylated cyclohexa-1,4-diene 240, which can be prepared in a highyielding five-step sequence from cyclohexane-1,3-dione, was subjected to selective oxidative cleavage and the product aldehyde reductively aminated using (S)-2-methoxy-1phenyethan-1-amine, thus affording compound 241, the substrate required for the pivotal intramolecular hydroamination reaction. On treating this 2°-amine with 20 mol % n-BuLi, conversion into the C3a-arylated hexahydroindole 242 was achieved. In order to remove the chiral auxiliary from this compound without concomitant reduction of the associated cyclohexene C=C bond, the olefin was protected as the corresponding epoxide, the auxiliary was then removed hydrogenolytically, and the resulting free amine protected as the corresponding O-t-butyl carbamate. Re-establishing the C=C bond required ring cleavage of the epoxide using Ph3P and molecular iodine and treatment of the resulting iodohydrin with zinc dust, thereby affording compound (+)-105. Following the protocols established in the closing stages of Overman's synthesis of (±)-3-epi-elwesine (Scheme 14), the Bocgroup within the last compound was removed using TFA, and the cyclohexene double bond was subjected to an oxymercuration/demercuration sequence that stereoeselectively Scheme 31. Fan's synthesis of (+)-vittatine [(+)-137] and its epimer 239 together with the structure of (+)-buphanisine [(+)-2] prepared by related means.
The based-catalysed intramolecular hydroamination of 1-ethylaminocyclohexa -2,5dienes developed by Landais [66] has provided a useful method for the assembly of the crinine alkaloid framework as exemplified by the synthesis of (+)-3-epi-elwesine [(+)-41] (Scheme 32). Thus, the arylated cyclohexa-1,4-diene 240, which can be prepared in a high-yielding five-step sequence from cyclohexane-1,3-dione, was subjected to selective oxidative cleavage and the product aldehyde reductively aminated using (S)-2-methoxy-1phenyethan-1-amine, thus affording compound 241, the substrate required for the pivotal intramolecular hydroamination reaction. On treating this 2 • -amine with 20 mol % n-BuLi, conversion into the C3a-arylated hexahydroindole 242 was achieved. In order to remove the chiral auxiliary from this compound without concomitant reduction of the associated cyclohexene C=C bond, the olefin was protected as the corresponding epoxide, the auxiliary was then removed hydrogenolytically, and the resulting free amine protected as the corresponding O-t-butyl carbamate. Re-establishing the C=C bond required ring cleavage of the epoxide using Ph 3 P and molecular iodine and treatment of the resulting iodohydrin with zinc dust, thereby affording compound (+)-105. Following the protocols established in the closing stages of Overman's synthesis of (±)-3-epi-elwesine (Scheme 14), the Boc-group within the last compound was removed using TFA, and the cyclohexene double bond was subjected to an oxymercuration/demercuration sequence that stereoeselectively produced More recently, Zhu has described [67] a desymmetrizing aza-Wacker-based variant of the Landais protocol that allowed for the synthesis of (+)-crinane [(+)-1]. The starting material used in this synthesis (Scheme 33) was the diene 243 obtained through selective Birch reductive alkylation of the corresponding biaryl. Exposure of compound 243 to a palladium catalyst and certain chiral ligands in the presence of sodium carbonate and oxygen gave the C3a-arylated tetrahydroindole 244 in 90% ee. Reduction of the cyclohexadiene C=C bonds was achieved using hydrogen in the presence of Pearlman's catalyst, and the two methoxy groups associated with product 245 were manipulated by standard methods to install the corresponding methylenedioxy unit as seen in congener 246. Cleavage of the tosyl group within the last compound then gave the perhydroindole (±)-12, which was converted into (+)-crinane [(±)-1] under standard Pictet-Spengler conditions. As highlighted in Scheme 16, while cyclopropane ring-expansion reactions provide a means for assembling the crinane framework, the radical cyclization reaction required to install the D-ring in that approach does not allow for functionalization of the C-ring. A related approach that circumvents such deficiencies is highlighted in Harvey's synthesis of maritinamine and its C3-epimer [68]. The reaction sequence started, as shown in More recently, Zhu has described [67] a desymmetrizing aza-Wacker-based variant of the Landais protocol that allowed for the synthesis of (+)-crinane [(+)-1]. The starting material used in this synthesis (Scheme 33) was the diene 243 obtained through selective Birch reductive alkylation of the corresponding biaryl. Exposure of compound 243 to a palladium catalyst and certain chiral ligands in the presence of sodium carbonate and oxygen gave the C3a-arylated tetrahydroindole 244 in 90% ee. Reduction of the cyclohexadiene C=C bonds was achieved using hydrogen in the presence of Pearlman's catalyst, and the two methoxy groups associated with product 245 were manipulated by standard methods to install the corresponding methylenedioxy unit as seen in congener 246. Cleavage of the tosyl group within the last compound then gave the perhydroindole (±)-12, which was converted into (+)-crinane [(±)-1] under standard Pictet-Spengler conditions. More recently, Zhu has described [67] a desymmetrizing aza-Wacker-based variant of the Landais protocol that allowed for the synthesis of (+)-crinane [(+)-1]. The starting material used in this synthesis (Scheme 33) was the diene 243 obtained through selective Birch reductive alkylation of the corresponding biaryl. Exposure of compound 243 to a palladium catalyst and certain chiral ligands in the presence of sodium carbonate and oxygen gave the C3a-arylated tetrahydroindole 244 in 90% ee. Reduction of the cyclohexadiene C=C bonds was achieved using hydrogen in the presence of Pearlman's catalyst, and the two methoxy groups associated with product 245 were manipulated by standard methods to install the corresponding methylenedioxy unit as seen in congener 246. Cleavage of the tosyl group within the last compound then gave the perhydroindole (±)-12, which was converted into (+)-crinane [(±)-1] under standard Pictet-Spengler conditions. As highlighted in Scheme 16, while cyclopropane ring-expansion reactions provide a means for assembling the crinane framework, the radical cyclization reaction required to install the D-ring in that approach does not allow for functionalization of the C-ring. A related approach that circumvents such deficiencies is highlighted in Harvey's synthesis of maritinamine and its C3-epimer [68]. The reaction sequence started, as shown in As highlighted in Scheme 16, while cyclopropane ring-expansion reactions provide a means for assembling the crinane framework, the radical cyclization reaction required to install the D-ring in that approach does not allow for functionalization of the C-ring. A related approach that circumvents such deficiencies is highlighted in Harvey's synthesis of maritinamine and its C3-epimer [68]. The reaction sequence started, as shown in Scheme 34, with the conversion of the aryl bromide 247 into the corresponding lithio-species that then added, in a 1,2-manner, to the enone 248, thus affording, after acidic work-up, compound 249. Luche reduction of the last species and acetylation of the ensuing allylic alcohol then provided the unsaturated acetate (±)-250, which readily engaged in an Ireland-Claisen rearrangement reaction to afford carboxylic acid (±)-251. This acid was readily converted into the nitrile (±)-252 and this, in turn, subjected to reaction with dichlorocarbene generated under phase transfer conditions. As a result, a 2:1 mixture of diastereoisomeric carbene adducts was obtained, and each of these could be converted into the corresponding carbamate [e.g., (±)-253] under standard conditions. Each of these was, in turn, independently engaged in a silver ion induced electrocyclic ring-opening reaction with the ensuing π-allyl cation then being trapped nucleophilically by the pendant carbamate residue, thus delivering the same C3a-arylated hexahydroindole, namely (±)-254, in 65-75% yield. Reductive dechlorination of the last compound was achieved using sodium in t-butanol and the resulting alkene subjected to an oxy-mercuration/demercuration reaction sequence, thus delivering a ca. A related approach (Scheme 35) has been employed by Petit [69] in the synthesis of the alkaloid hamayne that incorporates a hydroxyl group at C11 of the ethano-bridge. The synthesis began with the RCM reaction of the readily available diene 262 and dibromocarbene addition to the product cyclopentene to afford a diastereoisomeric mixture of adducts 263, the major one being readily obtained in pure form and 75% yield. Heating this major adduct resulted in electrocyclic ring-opening of the cyclopropane ring and formation of the isomeric dibromocyclohexene, the allylically-positioned halogen of which was displaced with sodium azide to give compound (±)-264. Staudinger reduction of this azide and reaction of the product amine with nosyl chloride (Ns-Cl) gave the sulfonamide (±)-265, which was engaged in a Suzuki-Miyaura cross coupling reaction with commercially available benzo[d] [1,3]dioxol-5-ylboronic acid (119) to afford styrene (±)-266. N-Alkylation of this last compound with 1-bromo-2-butyne in the presence of sodium hydride then gave compound (±)-267 that could be enaged in a palladium-catalyzed intramolecular Alder-ene (IMAE) reaction, using bis-benzylidene ethylenediamine (BBEDA) as ligand, to generate the C3a-arylated hexahydroindole (±)-268. Some levels of selectivity could be achieved in preferentially dihydroxylating the tri-substituted (and exocyclic) double bond within this diene, and the product diol was then oxidatively cleaved to give ketone (±)-269. Reaction of this last compound with potassium carbonate resulted in an E1 cb reaction, and the product imine (±)-270 was reduced in a stereoselective manner to give the alcohol (±)-271, which was itself subjected to a Pictet-Spengler reaction. As a result, the di-formate (±)-272 was obtained, and upon exposure of this compound to ammonia in methanol, the associated ester residues were cleaved and hamayne [(±)-273] thereby obtained. A related approach (Scheme 35) has been employed by Petit [69] in the synthesis of the alkaloid hamayne that incorporates a hydroxyl group at C11 of the ethano-bridge. The synthesis began with the RCM reaction of the readily available diene 262 and dibromocarbene addition to the product cyclopentene to afford a diastereoisomeric mixture of adducts 263, the major one being readily obtained in pure form and 75% yield. Heating this major adduct resulted in electrocyclic ring-opening of the cyclopropane ring and formation of the isomeric dibromocyclohexene, the allylically-positioned halogen of which was displaced with sodium azide to give compound (±)-264. Staudinger reduction of this azide and reaction of the product amine with nosyl chloride (Ns-Cl) gave the sulfonamide achieved in preferentially dihydroxylating the tri-substituted (and exocyclic) double bond within this diene, and the product diol was then oxidatively cleaved to give ketone (±)-269. Reaction of this last compound with potassium carbonate resulted in an E1cb reaction, and the product imine (±)-270 was reduced in a stereoselective manner to give the alcohol (±)-271, which was itself subjected to a Pictet-Spengler reaction. As a result, the di-formate (±)-272 was obtained, and upon exposure of this compound to ammonia in methanol, the associated ester residues were cleaved and hamayne [(±)-273] thereby obtained.

Scheme 35. Petit's synthesis of (±)-hamayne [(±)-273].
A closely related protocol was employed [70] to prepare compound (±)-274 (Figure 7), the C3-deoxy analogue of hamayne and the structure assigned, in a 1958 report, to the alkaloid haemultine. This alkaloid was isolated from the colorful bush lily Haemanthus multiflorus, extracts of which are used in certain traditional African medicines. The racemate (±)-274 could be resolved into its constituent enantiomers through formation of the corresponding Mosher esters, and after separation of the resulting diastereoisomers, these could be con- A closely related protocol was employed [70] to prepare compound (±)-274 (Figure 7), the C3-deoxy analogue of hamayne and the structure assigned, in a 1958 report, to the alkaloid haemultine. This alkaloid was isolated from the colorful bush lily Haemanthus multiflorus, extracts of which are used in certain traditional African medicines. The racemate (±)-274 could be resolved into its constituent enantiomers through formation of the corresponding Mosher esters, and after separation of the resulting diastereoisomers, these could be converted, under reducing conditions, into enantiomers (+)-274 and (−)-274. The physical and spectroscopic data derived from the former enantiomer were consistent with the proposition that the naturally-derived material was, in fact, a mixture of the crinine (+)-274 and its ∆ 2,3 -double bond isomer.
Molecules 2021, 26, x FOR PEER REVIEW spectroscopic data derived from the former enantiomer were tion that the naturally-derived material was, in fact, a mixtu its Δ 2,3 -double bond isomer. The strategy shown in Schemes 34 and 35 could also be [71], to the synthesis of certain enantiomerically pure crinin cyclopropane 116 was subjected to microwave-induced electr ensuing π-allyl cation captured with the homochiral and com 275, then the anticipated pair of diastereoisomeric adducts (Scheme 36). These could be readily separated by conventi niques at multi-gram scale, and each reacted with trifluoracet The strategy shown in Schemes 34 and 35 could also be adapted, as shown by Lan [71], to the synthesis of certain enantiomerically pure crinine alkaloids. If, for example, cyclopropane 116 was subjected to microwave-induced electrocyclic ring-opening and the ensuing π-allyl cation captured with the homochiral and commercially available 1 • -amine 275, then the anticipated pair of diastereoisomeric adducts 276 and 277 was obtained (Scheme 36). These could be readily separated by conventional chromatographic techniques at multi-gram scale, and each reacted with trifluoracetic anhydride (TFAA) to give the corresponding trifluoroacetamide 278 and 280, respectively. The PMB groups associated with each of these could, in turn, be cleaved with triflic acid (TfOH) when using anisole as a scavenging agent to intercept the benzyl cations so-formed. The resulting and enantiomerically related amides 279 and ent-279 were thus obtained. The former compound was subject to hydrolysis and the homochiral product amine then converted, under standard conditions, into the corresponding toluenesufonamide 281. Suzuki-Miyaura cross-coupling of this cyclohexenyl bromide with boronic acid 119 then gave styrene 282 and this was N-propagylated, via reaction with 1-bromo-2-butyne in the presence of NaH, to afford sulfonamide 283. The last compound proved to be a competent substrate for an IMAE reaction that was effected using Pd(OAc) 2 and delivered the C3a-arylated hexahydroindole 284. A two-step oxidative-cleavage of the exocyclic double-bond within this diene then gave ketone 285, which upon reduction with sodium borohydride and acetylation of the product alcohol gave the unsaturated ester 286. Subjection of this ester to allylic oxidation using SeO 2 afforded alcohol 287, which was converted into the corresponding methyl ether 288 under Irvine-Purdie conditions. Reductive cleavage of the sulfonamide residue within this last compound was accomplished using sodium naphthalenide and the product amine treated with ethyl formate, thus generating the formamide 289. In the final stage of the synthesis, compound 289 was treated with POCl 3 to effect a Bischler-Napieralski rather than a Pictet-Spengler cyclization and thereby provided, after work-up steps, the target (−)-haemanthidine [(−)-69] as an interconverting mixture of diastereoisomers.
The end-game associated with the total synthesis described immediately above was inspired by Tsuda's synthesis of racemic haemanthidine [(±)-69] as shown in Scheme 37 [72,73]. This started with the reaction of the nitrile 99 and ethyl oxalate in the presence of sodium ethoxide to give the cinnamate 290. Reductive cyclization of this intermediate using hydrogen in the presence of Raney nickel afforded lactam (±)-291. On heating this last compound at elevated temperatures, ethanol was expelled and the product enamine 292 trapped in situ, in a Diels-Alder reaction, with 1,3-butadiene, thus affording adduct (±)-293. Epoxidation of olefin (±)-293, via bromohydrin formation and base-induced ring closure, followed by methanolysis and lithium aluminium hydride reduction, gave compound (±)-294 that was itself subjected to formylation, hydrolysis, and acetylation steps to generate the formamide (±)-295. Treatment of this last compound with POCl 3 gave, after methanolysis of the initially formed product, amino-ketal (±)-296, the acetate groups of which were cleaved and the more accessible hydroxyl group within the product diol was then converted into the corresponding tosylate. The sulfonamide (±)-297 so-formed was treated with DBU and the product olefin (±)-298 heated in aqueous acetic acid to deliver the target alkaloid The end-game associated with the total synthesis described immediately above wa inspired by Tsuda's synthesis of racemic haemanthidine [(±)-69] as shown in Scheme 3 [72,73] pound (±)-294 that was itself subjected to formylation, hydrolysis, and acetylation steps to generate the formamide (±)-295. Treatment of this last compound with POCl3 gave, after methanolysis of the initially formed product, amino-ketal (±)-296, the acetate groups of which were cleaved and the more accessible hydroxyl group within the product diol was then converted into the corresponding tosylate. The sulfonamide (±)-297 so-formed was treated with DBU and the product olefin (±)-298 heated in aqueous acetic acid to deliver the target alkaloid (±)-haemanthidine [(±)-69]. Scheme 37. Tsuda's synthesis of (±)-haemanthidine [(±)-69].
Tsuda used a related strategy, and now involving a late-stage Pictet-Spengler cyclization reaction, to prepare (±)-haemanthamine [(±)-227] [72]. While less extensively deployed than the C6-C6a bond-forming approach to the crinane framework detailed in the preceeding section, the biomimetic approach (see Scheme 1), involving creation of the C4-N5 bond, has provided another effective means of obtaining the title alkaloids. Tsuda used a related strategy, and now involving a late-stage Pictet-Spengler cyclization reaction, to prepare (±)-haemanthamine [(±)-227] [72]. While less extensively deployed than the C6-C6a bond-forming approach to the crinane framework detailed in the preceeding section, the biomimetic approach (see Scheme 1), involving creation of the C4-N5 bond, has provided another effective means of obtaining the title alkaloids.
Uyeo was the first to explore this approach, and his efforts culminated in total syntheses of (+)-dihydrovittatine {(+)-elwesine [(+)-43]} and related compounds [74][75][76]. Thus, the 4,4-disubstituted cyclohexanone 299 (Scheme 38) was converted over ca. twelve steps into the γ-arylated butanoic acid 300, the acid chloride derivative of which was subjected to an intramolecular Friedel-Crafts acylation reaction to afford the spiro-annulated α-tetralone 301. Subjection of this last compound to a Schmidt reaction afforded a mixture of lactam (±)-302 [77,78] and its regio-isomer with the former being elaborated over three straightforward steps into the enone (±)-303. This last compound is "primed" for a biomimetic C4-N5 bond forming event, and the best way to achieve this was under acidic conditions and with ethylene ketal formation following the key cyclization event to afford product (±)-304.
jected to an intramolecular Friedel-Crafts acylation reaction to afford the spiro-annulated α-tetralone 301. Subjection of this last compound to a Schmidt reaction afforded a mixture of lactam (±)-302 [77,78] and its regio-isomer with the former being elaborated over three straightforward steps into the enone (±)-303. This last compound is "primed" for a biomimetic C4-N5 bond forming event, and the best way to achieve this was under acidic conditions and with ethylene ketal formation following the key cyclization event to afford product (±)-304. The synthesis of (±)-maritidine [(±)-11] reported by Schwartz [79] in 1970 had two biosynthetically relevant features associated with it. The first of these, as shown in Scheme 39, was the intermolecular para-para-oxidative coupling, using vanadium oxytrifluoride, of the readily available trifluoroacetamide derivative, 307, of O-methylnorbelladiene (8) and its conversion, thereby, into the tricyclic product 308. On treatment of the last compound with potassium carbonate in methanol, the associated amide residue was cleaved, and the resulting free amine engaged in a biomimetic and intramolecular hetero-Michael addition reaction to the pendant cyclohexadienone to form the tetracyclic isomer (±)-309. Reduction of this enone with sodium borohydride followed by O-methylation of the phenolic group in the product allylic alcohol then gave compound (±)-310, the epimer of target The synthesis of (±)-maritidine [(±)-11] reported by Schwartz [79] in 1970 had two biosynthetically relevant features associated with it. The first of these, as shown in Scheme 39, was the intermolecular para-para-oxidative coupling, using vanadium oxytrifluoride, of the readily available trifluoroacetamide derivative, 307, of O-methylnorbelladiene (8) and its conversion, thereby, into the tricyclic product 308. On treatment of the last compound with potassium carbonate in methanol, the associated amide residue was cleaved, and the resulting free amine engaged in a biomimetic and intramolecular hetero-Michael addition reaction to the pendant cyclohexadienone to form the tetracyclic isomer (±)-309. Reduction of this enone with sodium borohydride followed by O-methylation of the phenolic group in the product allylic alcohol then gave compound (±)-310, the epimer of target [(±)-11]. Upon treating compound (±)-310 with 10% aqueous HCl under reflux, (±)-maritidine [(±)-11] was then obtained in 29% yield (with 33% of its precursor also being recovered from the reaction mixture). [(±)-11]. Upon treating compound (±)-310 with 10% aqueous HCl under reflux, (±)-maritidine [(±)-11] was then obtained in 29% yield (with 33% of its precursor also being recovered from the reaction mixture).

Scheme 39. Schwartz's synthesis of (±)-maritidine [(±)-11].
A number of variations on this theme have emerged in the interim, with one of the first being reported by Tomioka (Scheme 40) [80] and allowing for the synthesis of (+)maritidine [(+) -11]. The reaction sequence started with a reductive amination reaction involving veratraldehyde (311) and L-tyrosine methyl ester (312), thus delivering amine 313. Conversion of this, under standard conditions, into the corresponding trifluoroacetamide 314 provided the substrate for exploring the pivotal oxidative para-para coupling reaction. After screening a range of reagents for carrying out this conversion, it was established that a solution of thallium trifluoroacetate (TTFA) in TFA was most effective for this purpose and allowed for the formation of the cyclohexadienone 315 in good yield. When this coupling product was treated with ammonia in methanol, the amide 316 was obtained, and on exposing this, in turn, to aqueous sodium hydroxide, then the trifluoroacetamide residue was cleaved, and the liberated amine underwent a completely diastereoselective hetero-Michael addition reaction to generate the tetracyclic compound 317. The now superfluous carboxamide moiety needed to be excised at this point, and this was achieved by its conversion into the corresponding nitrile 318 and, prior to removal of this, the associated enone unit was subject to 1,2-reduction, thus providing the allylic alcohol 319. Subjection of this last compound to Birch reduction conditions resulted in removal of the nitrile group and formation of (+)-3-epi-martidine [(+)-320], while heating this product in aqueous HCl resulted in epimerization, thus providing (+)-maritidine [(+)-11] itself, albeit in modest yield. A number of variations on this theme have emerged in the interim, with one of the first being reported by Tomioka (Scheme 40) [80] and allowing for the synthesis of (+)maritidine [(+) -11]. The reaction sequence started with a reductive amination reaction involving veratraldehyde (311) and L-tyrosine methyl ester (312), thus delivering amine 313. Conversion of this, under standard conditions, into the corresponding trifluoroacetamide 314 provided the substrate for exploring the pivotal oxidative para-para coupling reaction. After screening a range of reagents for carrying out this conversion, it was established that a solution of thallium trifluoroacetate (TTFA) in TFA was most effective for this purpose and allowed for the formation of the cyclohexadienone 315 in good yield. When this coupling product was treated with ammonia in methanol, the amide 316 was obtained, and on exposing this, in turn, to aqueous sodium hydroxide, then the trifluoroacetamide residue was cleaved, and the liberated amine underwent a completely diastereoselective hetero-Michael addition reaction to generate the tetracyclic compound 317. The now superfluous carboxamide moiety needed to be excised at this point, and this was achieved by its conversion into the corresponding nitrile 318 and, prior to removal of this, the associated enone unit was subject to 1,2-reduction, thus providing the allylic alcohol 319. Subjection of this last compound to Birch reduction conditions resulted in removal of the nitrile group and formation of (+)-3-epi-martidine [(+)-320], while heating this product in aqueous HCl resulted in epimerization, thus providing (+)-maritidine [(+)-11] itself, albeit in modest yield.
Node has described [84] related syntheses of (±)-siculine [(±)-323] and (±)-oxocrinine [(±)-136], the key features of which are shown in Figure 8. Thus, PIFA-mediated oxidative coupling of compound 321 afforded the cyclohexadienone 322, and the latter compound was readily elaborated to the natural product [(±)-323] through debenzylation, base-promoted cyclisation, and 1,2-reduction steps. The methylenedioxyaryl-substituted formamide 324 could be similarly cyclized with PIFA to give product 325, and on treating this with aqueous potassium hydroxide, both hydrolysis and hetero-Michael addition reactions took place to deliver (±)-oxocrinine [(±)-136]. Guillou used a distinct approach to generate the N-Boc protected equivalent of compound 325 and, thereby, (±)-oxocrinine [(±)-136] [85]. Thus, as shown in Scheme 41, Schiff base condensation of piperonal 326 with amine 327 followed by reduction of the resulting imine, ethylene ketal formation, and Boc protection of the 2°-amine residue gave the carbamate 328, which was subjected to an intramolecular Heck reaction. As a result, the spirocyclic product (±)-329 was obtained and oxidized to the cyclohexadienone 330 using selenium dioxide in acetic acid. Treatment of the latter compound with TFA and the amine salt so-formed with sodium hydroxide resulted in the anticipated hetero-Michael addition reaction and formation of (±)-oxocrinine [(±)-136]. Guillou used a distinct approach to generate the N-Boc protected equivalent of compound 325 and, thereby, (±)-oxocrinine [(±)-136] [85]. Thus, as shown in Scheme 41, Schiff base condensation of piperonal 326 with amine 327 followed by reduction of the resulting imine, ethylene ketal formation, and Boc protection of the 2 • -amine residue gave the carbamate 328, which was subjected to an intramolecular Heck reaction. As a result, the spirocyclic product (±)-329 was obtained and oxidized to the cyclohexadienone 330 using selenium dioxide in acetic acid. Treatment of the latter compound with TFA and the amine salt so-formed with sodium hydroxide resulted in the anticipated hetero-Michael addition reaction and formation of (±)-oxocrinine [(±)-136]. Guillou used a distinct approach to generate the N-Boc protected equivalent of compound 325 and, thereby, (±)-oxocrinine [(±)-136] [85]. Thus, as shown in Scheme 41, Schiff base condensation of piperonal 326 with amine 327 followed by reduction of the resulting imine, ethylene ketal formation, and Boc protection of the 2°-amine residue gave the carbamate 328, which was subjected to an intramolecular Heck reaction. As a result, the spirocyclic product (±)-329 was obtained and oxidized to the cyclohexadienone 330 using selenium dioxide in acetic acid. Treatment of the latter compound with TFA and the amine salt so-formed with sodium hydroxide resulted in the anticipated hetero-Michael addition reaction and formation of (±)-oxocrinine [(±)-136]. In yet another refinement of Uyeo's pioneering work (Scheme 38), Sánchez established a synthesis of (±)-dihydrooxocrinine [86] and, thereby, its reduction products (±)elwesine [(±)-43] and (±)3-epi-elwesine [(±) -41]. In this instance, the approach involved the In yet another refinement of Uyeo's pioneering work (Scheme 38), Sánchez established a synthesis of (±)-dihydrooxocrinine [86] and, thereby, its reduction products (±)elwesine [(±)-43] and (±)3-epi-elwesine [(±) -41]. In this instance, the approach involved the formation of a hydrobenzoazepine, Robinson-type annulation of which provided a spiro-annulated cyclohexenone residue that could be engaged in a biomimetic and intramolecular hetero-Michael addition reaction to establish the crinane framework. Thus, as shown in Scheme 42, cinnamonitrile 333 was treated with nitromethane in the presence of base to give adduct (±)-334, and this was converted, via the corresponding dimethyl acetal, into the dithioacetal (±)-335. Reduction of the nitrile residue within the last compound, protection of the resulting amine as a carbamate, and treatment of this with formaldehyde in the presence of base furnished the hydroxymethylated compound (±)-336. On treating compound (±)-336 with TsOH in refluxing benzene, a Tscherniac-Einhorn reaction took place to give the hydrobenzoazepine (±)-337. Cleavage of the associated dithioacetal then gave the corresponding aldehyde, which was engaged in a Robinson annulation using methyl vinyl ketone (MVK) and 1,5-diazabicyclo[4.3.0] -non-5-ene (DBN). This gave the spiro-annulated cyclohexenone (±)-338. The carbamate moiety associated with this last compound was then cleaved by treatment with dimethyl sulfide in the presence of BF 3 •Et 2 O, and the amine so liberated engaged in an in situ hetero-Michael addition reaction to give (±)-dihydrooxocrinine [(±)-339]. Reduction of this ketone with sodium borohydride gave (±)-3-epi-elwesine [(±)-41] exclusively, and upon subjecting this to a Mitsunobu reaction, using formic acid as the nucleophile, and saponifying the product formate (±)elwesine [(±)-43] was obtained. The application of a bromination/dehydrobromination reaction sequence to ketone [(±)-339] also allowed for the preparation of (±)-oxocrinine [(±)-136].
to give adduct (±)-334, and this was converted, via the corresponding dimethyl acetal, into the dithioacetal (±)-335. Reduction of the nitrile residue within the last compound, protection of the resulting amine as a carbamate, and treatment of this with formaldehyde in the presence of base furnished the hydroxymethylated compound (±)-336. On treating compound (±)-336 with TsOH in refluxing benzene, a Tscherniac-Einhorn reaction took place to give the hydrobenzoazepine (±)-337. Cleavage of the associated dithioacetal then gave the corresponding aldehyde, which was engaged in a Robinson annulation using methyl vinyl ketone (MVK) and 1,5-diazabicyclo [4.3.0] -non-5-ene (DBN). This gave the spiroannulated cyclohexenone (±)-338. The carbamate moiety associated with this last compound was then cleaved by treatment with dimethyl sulfide in the presence of BF3•Et2O, and the amine so liberated engaged in an in situ hetero-Michael addition reaction to give (±)-dihydrooxocrinine [(±)-339]. Reduction of this ketone with sodium borohydride gave (±)-3-epi-elwesine [(±)-41] exclusively, and upon subjecting this to a Mitsunobu reaction, using formic acid as the nucleophile, and saponifying the product formate (±)-elwesine [(±)-43] was obtained. The application of a bromination/dehydrobromination reaction sequence to ketone [(±)-339] also allowed for the preparation of (±)-oxocrinine [(±)-136]. Yang has reported [87] a variation of the Sánchez synthesis that has led to (±)-dihydrooxocrinine [(±)-339] (Scheme 43). So, reductive amination of bromopiperonal 340 using the hydrochloride salt, 341, of homoallyl amine gave the 2°-amine 342, the nitrogen of which was protected with a Boc group. The resulting carbamate was engaged in an intramolecular Heck reaction to afford the hydrobenzoazepine 343. The associated exocyclic olefin was then converted, via cyclization of the initially formed bromohydrin, into the Yang has reported [87] a variation of the Sánchez synthesis that has led to (±)dihydrooxocrinine [(±)-339] (Scheme 43). So, reductive amination of bromopiperonal 340 using the hydrochloride salt, 341, of homoallyl amine gave the 2 • -amine 342, the nitrogen of which was protected with a Boc group. The resulting carbamate was engaged in an intramolecular Heck reaction to afford the hydrobenzoazepine 343. The associated exocyclic olefin was then converted, via cyclization of the initially formed bromohydrin, into the corresponding spiro-epoxide, which rearranged under Lewis acid conditions to give aldehyde (±)-344. This last compound was subjected to a Robinson-type annulation using MVK in the presence of potassium hydroxide, and the cyclohexenone so formed treated, sequentially, with TFA and sodium hydroxide to deliver (±)-dihydrooxocrinine [(±)-339]. corresponding spiro-epoxide, which rearranged under Lewis acid conditions to give aldehyde (±)-344. This last compound was subjected to a Robinson-type annulation using MVK in the presence of potassium hydroxide, and the cyclohexenone so formed treated, sequentially, with TFA and sodium hydroxide to deliver (±)-dihydrooxocrinine [(±)-339]. Stephenson has employed [88,89], as a crucial intermediate, an arylcyclohexadienyliron complex in a biomimetic synthesis of (±)-dihydrooxomaritidine. This starts (Scheme 44) with the reaction of aryl halide 346 with n-BuLi and the addition of the ensuing lithio-species to cation 347 to form adduct (±)-348. Hydride ion abstraction from the last compound using trityl tetrafluoroborate and reaction of the resulting cation with anion 349 followed by treatment of the adduct so-formed with TBAF then afforded nitrile (±)-350, which was itself reduced with Raney nickel in the presence of ammonium hydroxide. The aminoalcohol thereby obtained was treated with Ph3P and molecular iodine in the presence of imidazole to afford, via an internal N-alkylation process, the spiro-annulated hydrobenzoazepine (±)-351. Treatment of this last compound with trimethylamine N-oxide resulted in metal decomplexation and mild acid hydrolysis of the liberated enol ether then afforded the corresponding enone that underwent the anticipated biomimetic hetero-Michael addition reaction on treatment with base to give, albeit in modest overall yield, the target (±)-dihydrooxomaritidine [(±)-352]. Stephenson has employed [88,89], as a crucial intermediate, an arylcyclohexadienyliron complex in a biomimetic synthesis of (±)-dihydrooxomaritidine. This starts (Scheme 44) with the reaction of aryl halide 346 with n-BuLi and the addition of the ensuing lithio-species to cation 347 to form adduct (±)-348. Hydride ion abstraction from the last compound using trityl tetrafluoroborate and reaction of the resulting cation with anion 349 followed by treatment of the adduct so-formed with TBAF then afforded nitrile (±)-350, which was itself reduced with Raney nickel in the presence of ammonium hydroxide. The amino-alcohol thereby obtained was treated with Ph 3 P and molecular iodine in the presence of imidazole to afford, via an internal N-alkylation process, the spiro-annulated hydrobenzoazepine (±)-351. Treatment of this last compound with trimethylamine Noxide resulted in metal decomplexation and mild acid hydrolysis of the liberated enol ether then afforded the corresponding enone that underwent the anticipated biomimetic hetero-Michael addition reaction on treatment with base to give, albeit in modest overall yield, the target (±)-dihydrooxomaritidine [(±)-352]. Zhou has described [90] an asymmetric hydrogenation process, using a homochiral iridium catalyst, that allows for the direct conversion of enones such as, for example, (±)-136 into ( Zhou has described [90] an asymmetric hydrogenation process, using a homochiral iridium catalyst, that allows for the direct conversion of enones such as, for example, (±)-136 into (-)-crinine [(-)-26] and (+)-epi-crinine [(+)-135] (Scheme 45), each of which was obtained in good enantiomeric excess. These products were most readily obtained in pure form by conversion into their respective benzoyl esters, chromatographic separation of these, and subsequent independant saponification of each. By employing this approach, an impressive range of crinine alkaloids could be obtained in highly enantiomerically enriched form.
Zhou has described [90] an asymmetric hydrogenation process, using a homochir iridium catalyst, that allows for the direct conversion of enones such as, for example, (± 136 into (-)-crinine [(-)-26] and (+)-epi-crinine [(+)-135] (Scheme 45), each of which wa obtained in good enantiomeric excess. These products were most readily obtained in pu form by conversion into their respective benzoyl esters, chromatographic separation these, and subsequent independant saponification of each. By employing this approac an impressive range of crinine alkaloids could be obtained in highly enantiomerically en riched form. Martin has described [91] total syntheses of (±)-crinine [(±)-26] and (±)-buphanisin [(±)-2] that deploy, as a crucial element, a biomimetic process (although the final rin forming step involves a Pictet-Spengler reaction). So, as shown in Scheme 46, the readi available 1,4-diketone mono-ketal 353 was treated with phosphonate ester 354 in the pre ence of n-BuLi to afford the three-fold adduct (±)-355. This compound was then C-alky ated, in situ, with bromide 356 to yield, after acid treatment, keto-aldehyde (±)-357. Upo exposure of the latter compound to pyrrolidine acetate then aldol and dehydration rea tions took place to produce cyclohexenone (±)-358, which was itself subjected to a bromi ation/dehydrobromination sequence to afford the cyclohexadienone 359. Cleavage of th carbamate residue associated with the last compound using Pd[0] revealed the corr sponding 2°-amine, which underwent the expected biomimetic hetero-Michael additio reaction to afford the C3a-arylated hydroindole (±)-360. This compound was then reduce in a 1,2-fashion with lithium aluminium hydride to give an epimeric mixture of the corr sponding allylic alcohols. Mesylation of these alcohols and methanolysis of the resultin esters allowed the ether (±)-361 to be obtained regio-and stereo-selectively. Hydrogeno ysis of the benzylamine moiety within compound (±)-361 using α-chloroethyl chlorofo mate (ACE-Cl) in the presence of 1,8-bis(dimethylamino) -naphthalene (proton spong Martin has described [91] total syntheses of (±)-crinine [(±)-26] and (±)-buphanisine [(±)-2] that deploy, as a crucial element, a biomimetic process (although the final ringforming step involves a Pictet-Spengler reaction). So, as shown in Scheme 46, the readily available 1,4-diketone mono-ketal 353 was treated with phosphonate ester 354 in the presence of n-BuLi to afford the three-fold adduct (±)-355. This compound was then C-alkylated, in situ, with bromide 356 to yield, after acid treatment, keto-aldehyde (±)-357. Upon exposure of the latter compound to pyrrolidine acetate then aldol and dehydration reactions took place to produce cyclohexenone (±)-358, which was itself subjected to a bromination/dehydrobromination sequence to afford the cyclohexadienone 359. Cleavage of the carbamate residue associated with the last compound using Pd[0] revealed the corresponding 2 • -amine, which underwent the expected biomimetic hetero-Michael addition reaction to afford the C3a-arylated hydroindole (±)-360. This compound was then reduced in a 1,2-fashion with lithium aluminium hydride to give an epimeric mixture of the corresponding allylic alcohols. Mesylation of these alcohols and methanolysis of the resulting esters allowed the ether (±)-361 to be obtained regio-and stereo-selectively. Hydrogenolysis of the benzylamine moiety within compound (±)-361 using α-chloroethyl chloroformate (ACE-Cl) in the presence of 1,8-bis(dimethylamino) -naphthalene (proton sponge) followed by heating gave the anticipated 2 • -amine that upon subjection to standard Pictet-Spengler conditions delivered (±)-buphanisine [(±)-2]. Simple modifications to the closing stages of this reaction sequence also provided access to (±)-crinine.
(c) C-ring Formation via Creation of the C1-C2-Bond (Intramolecular Aldol Condensation) In yet another important contribution to the synthesis of crinine alkaloids, Pandey has described [92][93][94] syntheses of (±)-crinine [(±)-26] and (±)-maritidine [(±)-11] that employ the intramolecular [3+2]cycloaddition of an azomethine ylide to a pendant styrene, thus simultaneously assembling the B-and D-rings of the target. The construction of the C-ring then follows using, in the final ring-forming step, an intramolecular aldol reaction analogous to the conversion (±)-357 → (±)-358 used in the Martin synthesis shown immediately above (Scheme 46). The reaction sequence is shown in Scheme 47 and involves, in the opening stages, reaction of the benzyl iodide 362 with the 2°-amine (±)-363. Stille-type cross-coupling of the product, (±)-364, of this reaction with the stannylated acrylate 365 then gave compound (±)-366. Treatment of bis-silane (±)-366 with silver fluoride resulted in the generation of the pivotal azomethine ylide 367, which engaged in an intramolecular [3+2] cycloaddition reaction with the pendant acrylate residue, thus affording compound (±)-368, the ester residue of which was reduced to the corresponding alcohol, and this was oxidized to the aldehyde (±)-369. An acid-catalyzed trans-ketalisation reaction with acetone then followed, and the product keto-aldehyde was treated with base, resulting in C1-C2-bond formation and, thereby, assembly of the C-ring as embodied in enone (±)-370. Luche reduction of the last compound, mesylation of the resulting allylic alcohols, and reaction of the esters so formed with caesium acetate gave predominantly a single product that upon reaction with potassium carbonate in methanol afforded (±)-maritidine [(±)-11]. An analogous reaction sequence was used to prepare (±)-crinine [(±)-26]. (c) C-ring Formation via Creation of the C1-C2-Bond (Intramolecular Aldol Condensation) In yet another important contribution to the synthesis of crinine alkaloids, Pandey has described [92][93][94] syntheses of (±)-crinine [(±)-26] and (±)-maritidine [(±)-11] that employ the intramolecular [3+2]cycloaddition of an azomethine ylide to a pendant styrene, thus simultaneously assembling the B-and D-rings of the target. The construction of the C-ring then follows using, in the final ring-forming step, an intramolecular aldol reaction analogous to the conversion (±)-357 → (±)-358 used in the Martin synthesis shown immediately above (Scheme 46). The reaction sequence is shown in Scheme 47 and involves, in the opening stages, reaction of the benzyl iodide 362 with the 2 • -amine (±)-363. Stille-type cross-coupling of the product, (±)-364, of this reaction with the stannylated acrylate 365 then gave compound (±)-366. Treatment of bis-silane (±)-366 with silver fluoride resulted in the generation of the pivotal azomethine ylide 367, which engaged in an intramolecular [3+2] cycloaddition reaction with the pendant acrylate residue, thus affording compound (±)-368, the ester residue of which was reduced to the corresponding alcohol, and this was oxidized to the aldehyde (±)-369. An acid-catalyzed trans-ketalisation reaction with acetone then followed, and the product keto-aldehyde was treated with base, resulting in C1-C2-bond formation and, thereby, assembly of the C-ring as embodied in enone (±)-370. Luche reduction of the last compound, mesylation of the resulting allylic alcohols, and reaction of the esters so formed with caesium acetate gave predominantly a single product that upon reaction with potassium carbonate in methanol afforded (±)maritidine [(±) -11]. An analogous reaction sequence was used to prepare (±)-crinine [(±) -26]. (d) C-ring Formation via Creation of the C2-C3-Bond (Carbonyl Ene Reaction) In another distinctive route to (±)-crinine [(±)-26], Lautens detailed [95] an intramolecular aryne ene reaction as a pivotal step and that, as a consequence, set up a second (carbonyl) ene reaction and thus allowing, in the closing stages and through C2-C3-bond formation, assembly of the C-ring. The reaction sequence is shown in Scheme 48 and started with reductive amination of bromopiperonal 340 by the 2°-amine obtained by deprotection of carbamate (±)-371 with TFA. On treating the ensuing 3°-amine (±)-372 with LDA, dehydrobromination of the arene took place, and the resulting aryne (±)-373 underwent the anticipated ene reaction to afford compound (±)-374 embodying the B-and D-rings of the target. Selective oxidative cleavage of the mono-substitited double bond within diene (±)-374 afforded aldehyde (±)-375 that engaged in a Lewis acid-catalyzed carbonyl ene reaction to afford, in a diastereo-selective process, the homoallylic alcohol (±)-376. Oxidative cleavage of the double bond within this last compound then gave the β-hydroxy ketone (±)-377, which, upon reaction with methanesulfonyl chloride in the presence of triethylamine, afforded enone (±)-33, an advanced intermediate associated with Whitlock's synthesis of (±)-crinine [(±)-26]. In another distinctive route to (±)-crinine [(±)-26], Lautens detailed [95] an intramolecular aryne ene reaction as a pivotal step and that, as a consequence, set up a second (carbonyl) ene reaction and thus allowing, in the closing stages and through C2-C3-bond formation, assembly of the C-ring. The reaction sequence is shown in Scheme 48 and started with reductive amination of bromopiperonal 340 by the 2 • -amine obtained by deprotection of carbamate (±)-371 with TFA. On treating the ensuing 3 • -amine (±)-372 with LDA, dehydrobromination of the arene took place, and the resulting aryne (±)-373 underwent the anticipated ene reaction to afford compound (±)-374 embodying the B-and D-rings of the target. Selective oxidative cleavage of the mono-substitited double bond within diene (±)-374 afforded aldehyde (±)-375 that engaged in a Lewis acid-catalyzed carbonyl ene reaction to afford, in a diastereo-selective process, the homoallylic alcohol (±)-376. Oxidative cleavage of the double bond within this last compound then gave the β-hydroxy ketone (±)-377, which, upon reaction with methanesulfonyl chloride in the presence of triethylamine, afforded enone (±)-33, an advanced intermediate associated (e) D-ring Formation via Creation of the N5-C12 Bond (Intramolecular Alkylation at Nitrogen with Accompanying Ethano-bridge Formation).
Another effective approach used to assemble the crinane framework 1 involves treating a substrate of the general form 378 (Figure 9) with base and thereby, through alkylation at nitrogen, establishing the N5-C12 bond and the associated D-ring. Hendrickson was the first to employ this strategy and used it to great effect in the synthesis of haemanthidine [(±)-69] as shown in Scheme 49 [96][97][98]. Thus, the arylated maleic anhydride 379 served as the dienophile in a Diels Alder reaction with 1,3-butadiene, and the adduct (±)-380 so-formed was treated with sodium methoxide to give the half-ester (±)-381. The acid residue associated with the last compound was subjected to a Curtius rearrangement, and the resulting isocyanate cyclized in polyphosphoric acid (PPA) to give lactam (±)-382. Saponification of the angular ester residue and engagement of the resulting acid salt in an iodo-lactonisation reaction gave compound (±)-383, and treatment of this with sodium hydroxide resulted in epoxide formation. Opening of the three-membered ring using boron trifluoride in methanol then afforded the lactone methyl ether (±)-384. A series of conventional manipulations of the lactone residue then followed, including conversion of the liberated alcohol into the mesylate and the acid into the corresponding diazoketone to afford compound (±)-385. Treament of this tricyclic intermediate with HCl resulted in N5-C12 bond formation and the creation of the ethanobridge as manifest in compound (±)-386. The ketone carbonyl within this last compound Another effective approach used to assemble the crinane framework 1 involves treating a substrate of the general form 378 (Figure 9) with base and thereby, through alkylation at nitrogen, establishing the N5-C12 bond and the associated D-ring. Another effective approach used to assemble the crinane framework 1 in ing a substrate of the general form 378 (Figure 9) with base and thereby, thr tion at nitrogen, establishing the N5-C12 bond and the associated D-ring. Hendrickson was the first to employ this strategy and used it to great synthesis of haemanthidine [(±)-69] as shown in Scheme 49 [96][97][98]. Thus, maleic anhydride 379 served as the dienophile in a Diels Alder reaction wit ene, and the adduct (±)-380 so-formed was treated with sodium methoxid half-ester (±)-381. The acid residue associated with the last compound was s Curtius rearrangement, and the resulting isocyanate cyclized in polypho (PPA) to give lactam (±)-382. Saponification of the angular ester residue and of the resulting acid salt in an iodo-lactonisation reaction gave compound treatment of this with sodium hydroxide resulted in epoxide formation. Op three-membered ring using boron trifluoride in methanol then afforded th thyl ether (±)-384. A series of conventional manipulations of the lactone resi lowed, including conversion of the liberated alcohol into the mesylate and the corresponding diazoketone to afford compound (±)-385. Treament of th termediate with HCl resulted in N5-C12 bond formation and the creation o bridge as manifest in compound (±)-386. The ketone carbonyl within this la Hendrickson was the first to employ this strategy and used it to great effect in the synthesis of haemanthidine [(±)-69] as shown in Scheme 49 [96][97][98]. Thus, the arylated maleic anhydride 379 served as the dienophile in a Diels Alder reaction with 1,3-butadiene, and the adduct (±)-380 so-formed was treated with sodium methoxide to give the half-ester (±)-381. The acid residue associated with the last compound was subjected to a Curtius rearrangement, and the resulting isocyanate cyclized in polyphosphoric acid (PPA) to give lactam (±)-382. Saponification of the angular ester residue and engagement of the resulting acid salt in an iodo-lactonisation reaction gave compound (±)-383, and treatment of this with sodium hydroxide resulted in epoxide formation. Opening of the three-membered ring using boron trifluoride in methanol then afforded the lactone methyl ether (±)-384. A series of conventional manipulations of the lactone residue then followed, including conversion of the liberated alcohol into the mesylate and the acid into the corresponding diazoketone to afford compound (±)-385. Treament of this tricyclic intermediate with HCl resulted in N5-C12 bond formation and the creation of the ethano-bridge as manifest in compound (±)-386. The ketone carbonyl within this last compound was stereoselectively reduced using diisoamylborane and the resulting alcohol acetylated. Elimination of the elements of methanesulfonic acid from this bis-ester was accomplished using DBU and thereby installing the ∆ 1,2 -double bond of the target. The acetate residue was then cleaved and the lactam carbonyl reduced with lithium aluminium hydride to give haemanthidine [(±)-69]. In the only photochemical approach to the crinane framework that seems to have been explored to date, Ninomiya started (Scheme 50) [99,100] by reacting piperonyl chloride 387 with the imine (±)-388 and then subjecting the product enamide (±)-389 to a photocyclization reaction to afford lactam (±)-390. Ozonolytic cleavage of the allyl group within this product and reduction of the ensuing aldehyde then gave alcohol (±)-391, and the derived tolsylate was reacted with potassium iodide in hot water to effect construction of the ethano-bridge and formation of the quaternary ammonium salt (±)-392. Exposure of this salt to hydrogen in the presence of palladium on carbon and concentrated HCl then gave, after basic work up, (±)-crinine [(±)-1]. Scheme 50. Ninomiya's synthesis of (±)-crinane [(±)-1]. In the only photochemical approach to the crinane framework that seems to have been explored to date, Ninomiya started (Scheme 50) [99,100] by reacting piperonyl chloride 387 with the imine (±)-388 and then subjecting the product enamide (±)-389 to a photocyclization reaction to afford lactam (±)-390. Ozonolytic cleavage of the allyl group within this product and reduction of the ensuing aldehyde then gave alcohol (±)-391, and the derived tolsylate was reacted with potassium iodide in hot water to effect construction of the ethano-bridge and formation of the quaternary ammonium salt (±)-392. Exposure of this salt to hydrogen in the presence of palladium on carbon and concentrated HCl then gave, after basic work up, (±)-crinine [(±)-1]. In the only photochemical approach to the crinane framework that seems to have been explored to date, Ninomiya started (Scheme 50) [99,100] by reacting piperonyl chloride 387 with the imine (±)-388 and then subjecting the product enamide (±)-389 to a photocyclization reaction to afford lactam (±)-390. Ozonolytic cleavage of the allyl group within this product and reduction of the ensuing aldehyde then gave alcohol (±)-391, and the derived tolsylate was reacted with potassium iodide in hot water to effect construction of the ethano-bridge and formation of the quaternary ammonium salt (±)-392. Exposure of this salt to hydrogen in the presence of palladium on carbon and concentrated HCl then gave, after basic work up, (±)-crinine [(±)-1].
In Grigg's synthesis of (-)-crinane [(-)-1] (Scheme 51) [101] acid chloride 393 was reacted with the homochiral allylic amine 394 (itself prepared via Overman rearrangement of an allylic alcohol obtained in homochiral form through kinetic resolution of the racemate using Sharpless asymmetric epoxidation techniques) to give amide 395. Subjection of the last compound to a palladium-catalyzed cyclisation led, in both a regio-and stereo-selective manner, to the lactam 396, which incorporated the necessary trans-junction between the Band C-rings of the developing crinane framework. Hydroboration/oxidation of the angular vinyl group associated with compound 396 gave amino-alcohol (−)-391, the racemic form of which served as a key intermediate in the Ninomiya synthesis described immediately above (Scheme 50). In the present example, compound (−)-391 was debenzylated using hydrogen in the presence of Pearlman's catalyst and the product 2 • -amine simply treated with thionyl chloride to effect ring closure and thereby establish the ethano-bridge and completing the synthesis of (−)-crinane [(−)-1]. In Grigg's synthesis of (-)-crinane [(-)-1] (Scheme 51) [101] acid chloride 393 was reacted with the homochiral allylic amine 394 (itself prepared via Overman rearrangement of an allylic alcohol obtained in homochiral form through kinetic resolution of the racemate using Sharpless asymmetric epoxidation techniques) to give amide 395. Subjection of the last compound to a palladium-catalyzed cyclisation led, in both a regio-and stereoselective manner, to the lactam 396, which incorporated the necessary trans-junction between the B-and C-rings of the developing crinane framework. Hydroboration/oxidation of the angular vinyl group associated with compound 396 gave amino-alcohol (−)-391, the racemic form of which served as a key intermediate in the Ninomiya synthesis described immediately above (Scheme 50). In the present example, compound (−)-391 was debenzylated using hydrogen in the presence of Pearlman's catalyst and the product 2°-amine simply treated with thionyl chloride to effect ring closure and thereby establish the ethano-bridge and completing the synthesis of (−)-crinane [(−)-1]. The synthesis of (−)-crinine [(−)-26] reported in 2017 by Tang [102,103] employs an intriguing variation of the para-para-biaryl coupling that has featured extensively in the biomimetic syntheses of the title alkaloids. The route starts (Scheme 52) with a reductive amination reaction between the bromopiperonal 340 and aniline 398 that produces the 2°amine 399. Protecting the amine nitrogen in this product with a bulky phosphoramide group and selective cleavage of the phenolic TBS ether afforded compound 400, which served as the substrate for a palladium-catalyzed and enantioselective dearomative cyclization, thus delivering the cyclohexadienone 401. Upon successive treatment of this compound with DIBAl-H, the Luche reagent, and TBAF, the diol 402 was obtained. On exposure of this tricyclic product to triphosgene the associated hydroxyl groups were converted into the corresponding chlorides, and the phosphoramide unit was cleaved. The resulting dichlorinated dialkylamide 403 then cyclized, in situ, and thereby established the ethano-bridge and the full crinane framework as embodied in compound 404. Treatment of this allylic chloride with silver acetate in the presence of a palladium catalyst followed by treatment of the product acetate with potassium carbonate then gave (−)-crinine [(−)-26] stereoselectively and in good yield. The synthesis of (−)-crinine [(−)-26] reported in 2017 by Tang [102,103] employs an intriguing variation of the para-para-biaryl coupling that has featured extensively in the biomimetic syntheses of the title alkaloids. The route starts (Scheme 52) with a reductive amination reaction between the bromopiperonal 340 and aniline 398 that produces the 2 • -amine 399. Protecting the amine nitrogen in this product with a bulky phosphoramide group and selective cleavage of the phenolic TBS ether afforded compound 400, which served as the substrate for a palladium-catalyzed and enantioselective dearomative cyclization, thus delivering the cyclohexadienone 401. Upon successive treatment of this compound with DIBAl-H, the Luche reagent, and TBAF, the diol 402 was obtained. On exposure of this tricyclic product to triphosgene the associated hydroxyl groups were converted into the corresponding chlorides, and the phosphoramide unit was cleaved. The resulting dichlorinated dialkylamide 403 then cyclized, in situ, and thereby established the ethano-bridge and the full crinane framework as embodied in compound 404. Treatment of this allylic chloride with silver acetate in the presence of a palladium catalyst followed by treatment of the product acetate with potassium carbonate then gave (−)-crinine [(−) -26] stereoselectively and in good yield. Compound 404 could also be reductively dechlorinated using Superhydride (LiBEt3H) and the product cyclohexene then stereoselectively dihydroxylated to give (−)amabiline [(−)-89. In contrast, reaction of the same allylic chloride with sodium methoxide gave a mixture of (−)-buphanisine [(−)-2] and its epimer (−)-405 with the latter predominating.

As Yet Unexplored Disconnections for Final Ring(s) Formation
Consideration of the approaches detailed above for the construction of the crinine alkaloid framework 1 reveals that there is a multitude of other possible means for assembling this important ring system. By simply confining such possibilities to single and final ring-bond forming events, those shown in Figure 10 illustrate some further options for molecular assembly. Whether such approaches are truly useful remains to be seen and will depend, in large part, on how readily the relevant precursors can be assembled and whether or not such approaches lend themselves to asymmetric synthesis and/or the formation of novel and otherwise less accessible derivatives. Compound 404 could also be reductively dechlorinated using Superhydride (LiBEt 3 H) and the product cyclohexene then stereoselectively dihydroxylated to give (−)-amabiline [(−)-89]. In contrast, reaction of the same allylic chloride with sodium methoxide gave a mixture of (−)-buphanisine [(−)-2] and its epimer (−)-405 with the latter predominating.

As Yet Unexplored Disconnections for Final Ring(s) Formation
Consideration of the approaches detailed above for the construction of the crinine alkaloid framework 1 reveals that there is a multitude of other possible means for assembling this important ring system. By simply confining such possibilities to single and final ring-bond forming events, those shown in Figure 10 illustrate some further options for molecular assembly. Whether such approaches are truly useful remains to be seen and will depend, in large part, on how readily the relevant precursors can be assembled and whether or not such approaches lend themselves to asymmetric synthesis and/or the formation of novel and otherwise less accessible derivatives. Of course, multiple bond forming and domino processes, which remain less expl approaches, are also likely, by virtue of their inherent efficiencies, to provide fe ground for future research.

Conclusions
The more than sixty-year history of the development of synthetic approaches to total syntheses of the title alkaloids parallels the evolution of organic chemistry more erally. Indeed, it might be argued that the story of crinine syntheses over this exten period provides something of a time capsule that allows the viewer to "observe" changing research priorities and techniques that have come into play during this t Ironically, perhaps, while the target structures have remained constant, that is not the with laboratory approaches to them. In the earlier phases of such work, the priority the target. More recently, however, the crinines have become vehicles for showcasing value of new methodologies. Precisely how this topic might evolve over the next few ades is difficult to predict and may well be influenced by the identification, if an crinines with real clinical value [104]. Given the capacity of crinines to serve as precur to other ring systems, including those associated with various natural products [6,7,108], new uses of the title compounds are likely to emerge and provide yet further imp for establishing distinctive routes to them.  Of course, multiple bond forming and domino processes, which remain less explored approaches, are also likely, by virtue of their inherent efficiencies, to provide fertile ground for future research.

Conclusions
The more than sixty-year history of the development of synthetic approaches to and total syntheses of the title alkaloids parallels the evolution of organic chemistry more generally. Indeed, it might be argued that the story of crinine syntheses over this extended period provides something of a time capsule that allows the viewer to "observe" the changing research priorities and techniques that have come into play during this time. Ironically, perhaps, while the target structures have remained constant, that is not the case with laboratory approaches to them. In the earlier phases of such work, the priority was the target. More recently, however, the crinines have become vehicles for showcasing the value of new methodologies. Precisely how this topic might evolve over the next few decades is difficult to predict and may well be influenced by the identification, if any, of crinines with real clinical value [104]. Given the capacity of crinines to serve as precursors to other ring systems, including those associated with various natural products [6,7,[105][106][107][108], new uses of the title compounds are likely to emerge and provide yet further impetus for establishing distinctive routes to them.