Next Article in Journal
Telodendrimer-Based Macromolecular Drug Design using 1,3-Dipolar Cycloaddition for Applications in Biology
Next Article in Special Issue
1,2,5-Thiadiazole 1,1-dioxides and Their Radical Anions: Structure, Properties, Reactivity, and Potential Use in the Construction of Functional Molecular Materials
Previous Article in Journal
Microbial Degradation of Hydrocarbons—Basic Principles for Bioremediation: A Review
Previous Article in Special Issue
Iron(II) Spin Crossover Complexes with 4,4′-Dipyridylethyne—Crystal Structures and Spin Crossover with Hysteresis
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

First Cobalt(II) Spin Crossover Compound with N4S2-Donorset

Department of Chemistry, Johannes Gutenberg University Mainz, 55128 Mainz, Germany
*
Author to whom correspondence should be addressed.
Molecules 2020, 25(4), 855; https://doi.org/10.3390/molecules25040855
Submission received: 30 January 2020 / Revised: 10 February 2020 / Accepted: 11 February 2020 / Published: 14 February 2020
(This article belongs to the Special Issue Functional Magnetic Molecular Materials)

Abstract

:
Herein we report the synthesis and characterization of a novel bis-tridentate 1,3,4-thiadiazole ligand (L = 2,5-bis[(2-pyridylmethyl)thio]methyl-1,3,4-thiadiazole). Two new mononuclear complexes of the type [MII(L)2](ClO4)2 (with M = FeII (C1) and CoII (C2)) have been synthesized, containing the new ligand (L). In both complexes the metal centers are coordinated by an N4S2-donorset and each of the two ligands is donating to the metal ion with just one of the tridentate pockets. The iron(II) complex (C1) is in the low spin [LS] state below room temperature and shows an increase in the magnetic moment only above 300 K. In contrast, the cobalt(II) complex (C2) shows a gradual spin crossover (SCO) with T1/2 = 175 K. To our knowledge, this is the first cobalt(II) SCO complex with an N4S2-coordination.

Graphical Abstract

1. Introduction

Switching metal complexes between two different electronic states, high spin [HS] and low spin [LS], by external stimuli such as temperature, light irradiation or pressure is known as spin crossover (SCO). Due to the molecular bistability and the associated change in the optical and magnetic properties upon switching, these compounds can possibly be used in memory storages, displays and sensors [1,2,3,4,5,6,7,8]. However, abruptness of the property changes and the occurrence of a thermal hysteresis is necessary for future applications. Both depend on the cooperative interactions between the metal centers in the solid state. ‘Intermolecularly’, the cooperativity can be enhanced by hydrogen bonding or π-π-stacking interactions between the complexes. ‘Intramolecularly’, in polynuclear complexes, the spin-bearing metal centers can be bridged via organic ligands, leading to close proximity and a stronger communication of these metal centers [5,9,10,11,12,13]. Although SCO coordination polymers often show large thermal hysteresis [14,15], research on discrete polynuclear, and in particular in dinuclear SCO systems recently increased because the latter have better reproducibility and easier characterization. The dimeric structural motif as the simplest and smallest model for investigating intramolecular cooperative interactions also offers potential access to three states ([HS-HS], [HS-LS] and [LS-LS]) [4,16,17]. However, the design of ligands that simultaneously act as a bridge and induce a suitable ligand field is a difficult task.
Our group recently reported on the synthesis and characterization of symmetrical dinuclear iron(II) compounds with bridging ligands based on the 1,3,4-oxadiazole as well as on the 1,3,4-thiadiazole backbone [18,19,20]. For the thiadiazole-based ligand 2,5-bis[(2-pyridylmethyl)amino]methyl-1,3,4-thiadiazole with pyridyl donor sidearms, the complexes are in the [LS-LS] state at low temperatures and show a gradual but incomplete spin crossover only above room temperature [19]. Inspired by the fruitful work of S. Brooker et al. [21], we herein report the modification of the previous reported ligand [19] by replacing the amino for thioether linkages. The longer C-S bonds compared to the C-N bonds give greater flexibility of the ligand, and thus, should enable the population of the [HS-LS] and/or the [HS-HS] state at elevated temperatures. However, rather than obtaining the dimeric [Fe2(µ-L)2]4+ complex cation, we exclusively isolated two new mononuclear complexes [MII(L)2](ClO)4 (with M = FeII (C1) and CoII (C2) and L = 2,5-bis[(2-pyridylmethyl)thio]methyl-1,3,4-thiadiazole). While the iron(II) complex (C1) remains in the [LS] state as well, the cobalt(II) complex shows a gradual SCO.

2. Results and Discussions

2.1. Synthesis

The synthesis of the ligand is presented in Scheme 1. We have previously reported the preparation of 2,5-bis(chloromethyl)-1,3,4-thiadiazole (1) [19]. Thioacetic acid S-pyridine-2-ylmethyl ester (2) was synthesized as described in literature [21]. Finally, the ligand (L = 2,5-bis[(2-pyridylmethyl)thio]methyl-1,3,4-thiadiazole) was obtained according to [21] by treating 2 with sodium ethanolate and thereafter reacting with 1 in a nucleophilic substitution.
The iron(II) and cobalt(II) complexes, [MII(L)2](ClO4)2, have been synthesized in a stochiometric reaction of the ligand (L) with the corresponding perchlorate salt (Fe(ClO4)4 × xH2O and Co(ClO4)2 × 6H2O) in methanol. The compounds were obtained as single crystals (C1 and C2) suitable for X-ray diffraction experiments via slow evaporation of the complex solutions. The iron(II) complex reaction was performed under nitrogen atmosphere and by using absolute methanol. The dried complexes are stable to air, no oxidation was observed.

2.2. Variable Temperature Magnetic Susceptibility Measurements

Variable temperature magnetic susceptibility measurements were carried on dried samples in the temperature range of 300–400 K for C1 and of 10–400 K for C2 in an applied magnetic field of 1000 Oe (0.1 T) and with a scan rate of 1.5 K/min. The temperature-dependent magnetic susceptibility date of the samples C1 and C2 are shown in Figure 1. C1 shows a χΜT value of 0.15 cm3Kmol−1 at 300 K accounting for a diamagnetic iron(II) ion in the [LS] state. Also, the structural data obtained by X-ray crystallography at 173 K (described below) confirms an LS state of the iron(II) indicating that no spin crossover occurs until 300 K. Raising the temperature to 400 K, the χΜT value slightly increases to 0.36 cm3Kmol−1. Although this rise is no evidence of a spin crossover, it is at least a strong indication. The diamagnetic nature of C1 at room temperature is further confirmed by the 1H-NMR spectra of the complex, shown along with that of the ligand in Figure S3 in the supporting information.
At low temperature, compound C2 shows a χΜT value of 0.47 cm3Kmol−1, which accounts for a cobalt(II) ion in the [LS] state in accordance with the single X-ray structure analysis at 120 K. With increasing temperature, the χΜT product remains almost constant until 100 K, then raises up to 2.20 cm3Kmol−1 at 250 K. This is explained by a gradual spin transition of the complex from [LS] to [HS] with a transition temperature T1/2 of 175 K. No magnetic hysteresis is observed. In fact, when using a cooling/heating rate of 1.5 K/min, the χΜT vs. T curves for the heating or cooling mode cannot be distinguished. The χΜT values for [LS] and [HS] cobalt(II) are slightly higher than the calculated ones ([LS] = 0.38 cm3Kmol−1 and [HS] = 1.88 cm3Kmol−1) using the spin-only formalism. This is expected because the spin-only formalism does not take into account orbit angular momentum contribution.
It is known from literature that cobalt(II) complexes with N-donor ligands, which form with iron(II) only [LS] complexes, might show SCO and is well studied for terpyridine complexes [2,4,22]. However, to the best of our knowledge, the cobalt(II) complex reported here is the only one showing this phenomena with Co(II) in a N4S2 coordination.

2.3. Crystal Structures

The complex [FeII(L)2](ClO4)2 (C1) crystallizes in the monoclinic space group P21/c at 173 K. The crystal structure of complex [CoII(L)2](ClO4)2 (C2) was measured at two different temperatures (120 K and 250 K) to confirm the spin crossover phenomenon. For both temperatures, the monoclinic space group is P21/c. In all three structures, C1 (@173 K) and C2 (@120 K) and C2 (@250 K) the complex cation consists of one metal ion and two ligand molecules, showing pseudo centrosymmetry as sketched in Figure 2. Each ligand contributes with one of the tridentate N2S binding pockets to the N4S2 octahedral coordination sphere. The second potentially donating binding pocket is not coordinating.
For all complex cations (C1 and C2 at both temperatures), the cis-angles within the donor atoms of one ligand (NTDA(L,L’)-M-NPy(L,L’), NTDA(L,L’)-M-S(L,L’) and NPy(L,L’)-M-S(L,L’), Figure 3) are ranging from 83° to 85°, while the cis-angles between the donor atoms of the different ligands (NTDA(L)-M-NPy(L’), NTDA(L)-M-S(L’) and NPy(L)-M-S(L’) and vice versa) are ranging from 95° to 97°. This results in trans-angles (NTDA(L)-M-NTDA(L’), NPy(L)-M-NPy(L’) and S(L)-M-S(L’)) of almost 180° and in a slightly distorted octahedral coordination for the metal centers, in which the axis NPy(L)-M-NPy(L’) is inclined around 5–6° from the ideal geometry (black lines) towards the ligands due to the strain within the ligand backbone.
The crystal structures further compromise two perchlorate anions to counterbalance the charge. All the complexes crystallize without any solvent molecules, which allows to investigate dried crystalline samples.
The average Fe-N bond length of 1.990 Å and Fe-S bond length of 2.264 Å in C1 (@173 K) are in accordance with those reported in literature and account for an iron(II) ion in the [LS] state [23,24,25,26,27,28,29]. Figure S7 shows the crystal structure/asymmetric unit of C1 (@173 K). Detailed information on bond lengths and angles for C1 and C2 are summarized in Table 1.
For C2 (@250 K), the average Co-N bond length of 2.066 Å, as well as the average Co-S bond length of 2.479 Å indicate a [HS] cobalt(II) ion [30,31,32,33,34,35,36]. Cooling to 120 K results in a spin crossover from the [HS] to the [LS] state for the cobalt(II) center as shown by magnetic data. The average Co-N distance decreases to from 2.066 Å to 2.002 Å, which is in accordance with literature [37,38,39]. The shortening of the Co-N bond is explained by the decrease of electron density in the antibonding d-orbitals from t2g5eg*2 in the [HS] state to t2g6eg*1 in the [LS] state. Notably, the average Co-S distance remains about the same (2.479 Å @250 K and 2.472 Å @120 K) upon changing the electronic state of the cobalt(II) ion. This is explained by the Jahn-Teller distortion expected for a d7-Co(II) ion in [LS] state, with four short Co-N bonds in equatorial plane and two long ‘axial’ Co-S bonds. Uponcooling down the transition from [HS] to [LS] also affects the counter ion. Ordering of one of the perchlorate anions in the crystal structure results in a phase change. While at 250 K only half of the complex is in the asymmetric unit, the entire complex cation is found at 120 K. This is accompanied by a doubling of the cell volume from 1990 Å3 (@250 K) to 3874 Å3 (@120 K) (see Figure 4 and Figures S8 and S9 in ESI).
When comparing our findings with the dinuclear structures obtained by S. Brooker et al. [21], the question arises, why the use of our new ligand (L) results in mononuclear complexes? In the dimeric complexes of S. Brooker et al. two iron(II) ions are coordinated by two ligand molecules, thus each iron(II) center has a N4S2 coordination sphere, and the two sulphur donor atoms are coordinating cis to each other as depicted in Figure 5a. Changing the 1,3,4-triazole to the 1,3,4-thiadiazole as the backbone in the thioether-linked ligand leads to a different strain and to closer proximity of the sulphur donor atoms in the cis coordination, which is highly unfavorable. Hence, we exclusively obtained mononuclear complexes in which the sulphur donor atoms are coordinating trans to each other (Figure 5b). Similar findings were previously reported for iron(II) complexes with 1,3,4-triazole or 1,3,4-thiadiazole bridging ligands with an amino- rather than a thioether-linker group. Here, changing from the 1,3,4-triazole to the 1,3,4-thiadiazole backbone results in a larger angle between the intraligand donor atoms and the amine donor atoms of the two facing ligands, which are in closer proximity compared to the ones in the 1,3,4-triazole [19].

3. Materials and Methods

3.1. General Methods and Materials

All chemicals were purchased from Alfa Aesar, Deutero, Fisher Chemicals, TCI, Sigma-Aldrich and Acros Organics and used without further purification. Absolute solvents were dried according to known procedures and used freshly distilled [40]. The NMR spectra were recorded at room temperature with a Bruker Avance DSX 400 and analyzed with the program MestReNova [41]. Magnetic susceptibility measurements were performed on a Quantum Design SQUID magnetometer MPMSXL in a temperature range between 10–400 K with an applied field of 1 kOe. ESI and FD mass spectra as well as elemental analysis (C,H and N) were measured at the microanalytical laboratories of the Johannes Gutenberg University Mainz. X-ray diffraction data were collected at 173 K with STOE STADIVARI and at 120 K with a STOE IPDS 2T at the Johannes Gutenberg University Mainz. The structures were solved with ShelXT [42] and refined with ShelXL [43] implemented in the program Olex2 [44]. Caution! The prepared perchlorate complexes are potentially explosive. Even though no explosions occurred, only small amounts should be prepared and handled with care.

3.2. Ligand Synthesis

2,5-Bis(chloromethyl)-1,3,4-thiadiazole (1) and thioacetic acid S-pyridine-2-ylmethyl ester (2) were prepared as described in literature [19,21]. The ligand (L = 2,5-bis[(2-pyridylmethyl)thio]methyl-1,3,4-thiadiazole) was synthesized based on similar nucleophilic substitution to that found in literature [21].

2,5-Bis[(2-pyridylmethyl)thio]methyl-1,3,4-thiadiazole (L)

Sodium (1.17 g, 51.0 mmol, 8.5 equiv.) was dissolved in ethanol (100 mL) at 0 °C and under nitrogen atmosphere. Thioacetic acid S-pyridine-2-ylmethyl ester (2) (2.11 g, 12.6 mmol, 2.1 equiv.) in ethanol (25 mL) was added, and the resulting brown solution was stirred at 0 °C for 30 min. Afterwards, 2,5-bis(chloromethyl)-1,3,4-thiadiazole (1) (1.10 g, 6.0 mmol, 1.0 equiv.) in ethanol (25 mL) was added at room temperature and the orange suspension was stirred for 17 h. The reaction mixture was poured into water (150 mL) and ethanol was removed under reduced pressure. The resulting suspension was extracted three times with dichloromethane (50 mL). The combined organic extracts were washed with brine (30 mL) and dried over magnesium sulfate. The solvent was removed under reduced pressure and the resulting crude product was purified by column chromatography (SiO2, dichloromethane/methanol 49:1) to give the pure product as brown oil. Yield: 1.54 g (4.28 mmol, 71.4%). 1H-NMR (400 MHz, CDCl3, 25 °C): δ = 8.57–8.51 (m, 2H, H-6, py), 7.67–7.54 (m, 2H, H-4, py), 7.32–7.29 (m, 2H, H-3, py), 7.19–7.05 (m, 2H, H-5, py), 4.01 (s, 4H, CH2, tda), 3.84 (s, 4H, CH2, py) ppm. 13C-NMR (100 MHz, CDCl3, 25 °C): δ = 170.7 (C, tda), 157.3 (C-1, py), 149.9 (C-6, py), 136.8 (C-4, py), 123.5 (C-3, py), 122.3 (C-5, py), 37.8 (CH2, py), 29.5 (CH2, tda) ppm. ESI-MS (MeOH): m/z (%) = 361.06 (96) [(M+H)+], 383.04 (32) [(M+Na)+], 743.10 (100) [(2M+Na)+]. Elemental analysis (C16H16N4S3): calcd. C 53.30, H 4.47, N 15.54; found C 52.83, H 4.58, N 15.78.

3.3. Complex Synthesis

To a yellow solution of the ligand (L) (0.1 mmol) in methanol (3 mL), an almost colorless solution of the corresponding metal(II) salt [0.1 mmol, Fe(ClO4)2 × xH2O or Co(ClO4)2 × 6H2O] in methanol (3 mL) was added. Slow evaporation at room temperature of the obtained orange solutions resulted in the formation of crystals suitable for X-ray diffraction after several hours. The iron(II) complex was prepared under nitrogen atmosphere and by using dried solvents.

3.3.1. [FeII(L)2](ClO4)2 (C1)

Fe(ClO4)2 × xH2O (27 mg) and 2,5-bis[(2-pyridylmethyl)thio]methyl-1,3,4-thiadiazole (L, 36 mg) were used to obtain C1 (38 mg, 77.9%) as dark brown crystals suitable for X-ray diffraction. C32H32Cl2FeN8O8S6 [FeII(L)2](ClO4)2 (975.76): calc. C 39.39, H 3.31, N 11.48; found (after drying in vacuo) C 38.96, H 3.03, N 11.28.

3.3.2. [CoII(L)2](ClO4)2 (C2)

Co(ClO4)2 × 6H2O (36 mg) and 2,5-bis[(2-pyridylmethyl)thio]methyl-1,3,4-thiadiazole (L, 37 mg) were used to obtain C2 (48 mg, 98.1%) as orange crystals suitable for X-ray diffraction. C32H32Cl2CoN8O8S6 [CoII(L)2](ClO4)2 (978.85): calc. C 39.27, H 3.30, N 11.45; found (after drying in vacuo) C 39.00, H 3.21, N 11.34.

4. Conclusions

In conclusion, using the novel bis-tridentate 1,3,4-thiadiazole ligand (L = 2,5-bis[(2-pyridylmethyl)thio]methyl-1,3,4-thiadiazole), we were able to synthesize and characterize two new complexes [MII(L)2](ClO4)2 (with M = FeII (C1) and CoII (C2)). Due to the fact that mononuclear complexes were obtained, rather than the expected dinuclear ones, we assume this is due to the fact that the sulphur donor atoms of the thioether linkages are large compared to the nitrogen donor atoms of the amino linkages reported by Herold [19]. Thus, the cis-coordination of two sulphur donor atoms is unfavorable. The magnetic data of the mononuclear compound together with the single crystal X-ray structure analysis reveal a [LS] state for the iron(II) complex (C1) until 400 K. The cobalt(II) compound (C2) shows a gradual SCO between 100 K and 250 K from [LS] to [HS] state with a transition temperature T1/2 of 175 K. To our knowledge, this is the first cobalt(II) complex with a N4S2 coordination environment, showing SCO behavior, that has been reported.

Supplementary Materials

The following are available online at https://www.mdpi.com/1420-3049/25/4/855/s1, Figure S1: 1H-NMR of 2,5-bis[(2-pyridylmethyl)thio]methyl-1,3,4-thiadiazole (L). Figure S2: 13C-NMR of 2,5-bis[(2-pyridineylmethyl)thio]methyl-1,3,4-thiadiazole (L). Figure S3: Comparison of the 1H-spectra of a) [FeII(L)2](ClO4)2 (C1) and b) 2,5-Bis{[(pyridine-2-ylmethyl)-thio]-methyl}-1,3,4-thiadiazole (L). Figure S4: Mass spectrum of 2,5-bis[(2-pyridylmethyl)thio]methyl-1,3,4-thiadiazole (L). Figure S5: IR spectrum of dried [FeII(L)2](ClO4)2 (C1). Figure S6: IR spectrum of dried [CoII(L)2](ClO4)2 (C2). Figure S7: Molecular structure of [FeII(L)2](ClO4)2 (C1) with thermal ellipsoids at 173 K. b) Asymmetric unit without hydrogens, solvent molecules and counter ions. Color code: Fe dark red, N blue, S yellow, C grey, H light grey, Cl green and O red. Figure S8: Molecular structure of [CoII(L)2](ClO4)2 (C2) with thermal ellipsoids at 120 K. Color code: Co dark blue, N blue, S yellow, C grey, H white, Cl green and O red. Figure S9: Molecular structure of [CoII(L)2](ClO4)2 (C2) with thermal ellipsoids at 250 K. Color code: Co dark blue, N blue, S yellow, C grey, H white, Cl green and O red. Table S1: Crystallographic parameters for the discussed crystal structures of C1 and C2. CCDC 1980403 for C1 (@173 K), 1980401 for C2 (@120 K), 1980402 for C2 (@250 K) contain the supplementary crystallographic data for this paper. These data can be obtained free of charge from The Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif.

Author Contributions

F.F. conceived the synthesis. With the help of D.M. he synthesized and characterized the ligand and the complexes. F.F. gathered and analyzed the magnetic data. L.M.C. performed the X-ray acquisition data and analysis. E.R. supervised the project. F.F., L.M.C. and E.R. contributed to the manuscript. All authors have read and agreed to the published version of the manuscript.

Funding

This research received no external funding.

Acknowledgments

Dieter Schollmeyer is kindly acknowledged for collecting the crystal structure data of C2 (@120 K).

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Gütlich, P.; Goodwin, H.A. (Eds.) Spin Crossover in Transition Metal Compounds I; Topics in Current Chemistry; Springer: Berlin/Heidelberg, Germany, 2004; Volume 233, ISBN 978-3-540-40394-4. [Google Scholar]
  2. Gütlich, P.; Goodwin, H.A. Spin Crossover in Transition Metal Compounds II; Topics in Current Chemistry; Springer: Berlin/Heidelberg, Germany, 2004; Volume 234, ISBN 978-3-540-40396-8. [Google Scholar]
  3. Gütlich, P.; Goodwin, H.A. Spin Crossover in Transition Metal Compounds III; Topics in Current Chemistry; Springer: Berlin/Heidelberg, Germany, 2004; Volume 235, ISBN 978-3-540-40395-1. [Google Scholar]
  4. Halcrow, M.A. (Ed.) Spin-Crossover Materials; John Wiley & Sons Ltd.: Oxford, UK, 2013; ISBN 9781118519301. [Google Scholar]
  5. Kahn, O. Spin-Transition Polymers: From Molecular Materials toward Memory Devices. Science 1998, 279, 44–48. [Google Scholar] [CrossRef]
  6. Gütlich, P.; Hauser, A.; Spiering, H. Thermisch und optisch schaltbare Eisen(II)-Komplexe. Angew. Chem. 1994, 106, 2109–2141. [Google Scholar] [CrossRef]
  7. Dhers, S.; Feltham, H.L.C.; Brooker, S. A toolbox of building blocks, linkers and crystallisation methods used to generate single-chain magnets. Coord. Chem. Rev. 2015, 296, 24–44. [Google Scholar] [CrossRef]
  8. Brooker, S. Spin crossover with thermal hysteresis: Practicalities and lessons learnt. Chem. Soc. Rev. 2015, 44, 2880–2892. [Google Scholar] [CrossRef] [Green Version]
  9. Barrios, L.A.; Peyrecave-Lleixà, E.; Craig, G.A.; Roubeau, O.; Teat, S.J.; Aromí, G. Unusual Crystal Packing in a Family of [Fe{2,6-bis(pyrazol-3-yl)pyridine} 2 ] 2+ Compounds and the Effect on the Occurrence of Spin Crossover and Its Cooperative Character. Eur. J. Inorg. Chem. 2014, 2014, 6013–6021. [Google Scholar] [CrossRef]
  10. Halcrow, M.A. Structure:function relationships in molecular spin-crossover complexes. Chem. Soc. Rev. 2011, 40, 4119–4142. [Google Scholar] [CrossRef]
  11. Gütlich, P.; Goodwin, H.A. Spin Crossover—An Overall Perspective. In Spin Crossover in Transition Metal Compounds I; Springer: Berlin/Heidelberg, Germany, 2004; Volume 1, pp. 1–47. [Google Scholar]
  12. Roberts, T.D.; Little, M.A.; Kershaw Cook, L.J.; Halcrow, M.A. Iron(ii) complexes of 2,6-di(1H-pyrazol-3-yl)-pyridine derivatives with hydrogen bonding and sterically bulky substituents. Dalt. Trans. 2014, 43, 7577–7588. [Google Scholar] [CrossRef]
  13. Bauer, W.; Lochenie, C.; Weber, B. Synthesis and characterization of 1D iron( ii ) spin crossover coordination polymers with hysteresis. Dalt. Trans. 2014, 43, 1990–1999. [Google Scholar] [CrossRef]
  14. Kahn, O.; Kröber, J.; Jay, C. Spin Transition Molecular Materials for displays and data recording. Adv. Mater. 1992, 4, 718–728. [Google Scholar] [CrossRef]
  15. Kröber, J.; Codjovi, E.; Kahn, O.; Grolière, F.; Jay, C. A Spin Transition System with a Thermal Hysteresis at Room Temperature. J. Am. Chem. Soc. 1993, 115, 9810–9811. [Google Scholar] [CrossRef]
  16. Real, J.A.; Gaspar, A.B.; Niel, V.; Muñoz, M.C. Communication between iron(II) building blocks in cooperative spin transition phenomena. Coord. Chem. Rev. 2003, 236, 121–141. [Google Scholar] [CrossRef]
  17. Real, J.A.; Gaspar, A.B.; Muñoz, M.C. Thermal, pressure and light switchable spin-crossover materials. Dalt. Trans. 2005, 2062–2079. [Google Scholar] [CrossRef] [PubMed]
  18. Köhler, C.; Rentschler, E. The First 1,3,4-Oxadiazole Based Dinuclear Iron(II) Complexes Showing Spin Crossover Behavior with Hysteresis. Eur. J. Inorg. Chem. 2016, 2016, 1955–1960. [Google Scholar] [CrossRef]
  19. Herold, C.F.; Carrella, L.M.; Rentschler, E. A Family of Dinuclear Iron(II) SCO Compounds Based on a 1,3,4-Thiadiazole Bridging Ligand. Eur. J. Inorg. Chem. 2015, 2015, 3632–3636. [Google Scholar] [CrossRef]
  20. Fürmeyer, F.; Carrella, L.M.; Ksenofontov, V.; Möller, A.; Rentschler, E. Phase trapping in multistep spin crossover compound. Inorg. Chem. 2020, in press. [Google Scholar]
  21. Hogue, R.W.; Feltham, H.L.C.; Miller, R.G.; Brooker, S. Spin Crossover in Dinuclear N 4 S 2 Iron(II) Thioether–Triazole Complexes: Access to [HS-HS], [HS-LS], and [LS-LS] States. Inorg. Chem. 2016, 55, 4152–4165. [Google Scholar] [CrossRef]
  22. Hayami, S.; Komatsu, Y.; Shimizu, T.; Kamihata, H.; Lee, Y.H. Spin-crossover in cobalt(II) compounds containing terpyridine and its derivatives. Coord. Chem. Rev. 2011, 255, 1981–1990. [Google Scholar] [CrossRef]
  23. Grillo, A.V.; Gahan, R.L.; Hanson, R.G.; Stranger, R.; Hambley, W.T.; Murray, S.K.; Moubaraki, B.; Cashion, D.J. Iron(III) and iron(II) complexes of 1-thia-4{,}7-diazacyclononane ([9]aneN2S) and 1{,}4-dithia-7-azacyclononane ([9]aneNS2). X-Ray structural analyses{,} magnetic susceptibility{,} Mössbauer{,} EPR and electronic spectroscopy †. J. Chem. Soc., Dalt. Trans. 1998, 2341–2348. [Google Scholar] [CrossRef]
  24. England, J.; Gondhia, R.; Bigorra-Lopez, L.; Petersen, A.R.; White, A.J.P.; Britovsek, G.J.P. Towards robust alkane oxidation catalysts: Electronic variations in non-heme iron(ii) complexes and their effect in catalytic alkane oxidation. Dalt. Trans. 2009, 27, 5319–5334. [Google Scholar] [CrossRef] [Green Version]
  25. Reus, C.; Ruth, K.; Tüllmann, S.; Bolte, M.; Lerner, H.-W.; Weber, B.; Holthausen, M.C.; Wagner, M. Synthesis, Molecular Structure, and Physical Properties of the Complexes [{PhB(pz)2(CH2SMe)}2M] (M = MnII, FeII; pz = pyrazol-1-yl) Containing a Novel [N,N,S]-Heteroscorpionate Ligand. Eur. J. Inorg. Chem. 2011, 2011, 1709–1718. [Google Scholar] [CrossRef]
  26. Lennartson, A.; Bond, A.D.; Piligkos, S.; McKenzie, C.J. Four-Site Cooperative Spin Crossover in a Mononuclear Fe II Complex. Angew. Chem. 2012, 124, 11211–11214. [Google Scholar] [CrossRef]
  27. Lennartson, A.; Southon, P.; Sciortino, N.F.; Kepert, C.J.; Frandsen, C.; Mørup, S.; Piligkos, S.; McKenzie, C.J. Reversible Guest Binding in a Non-Porous Fe II Coordination Polymer Host Toggles Spin Crossover. Chem.-A Eur. J. 2015, 21, 16066–16072. [Google Scholar] [CrossRef]
  28. Arroyave, A.; Lennartson, A.; Dragulescu-Andrasi, A.; Pedersen, K.S.; Piligkos, S.; Stoian, S.A.; Greer, S.M.; Pak, C.; Hietsoi, O.; Phan, H.; et al. Spin Crossover in Fe(II) Complexes with N 4 S 2 Coordination. Inorg. Chem. 2016, 55, 5904–5913. [Google Scholar] [CrossRef]
  29. Yergeshbayeva, S.; Hrudka, J.J.; Lengyel, J.; Erkasov, R.; Stoian, S.A.; Dragulescu-Andrasi, A.; Shatruk, M. Heteroleptic Fe(II) Complexes with N 4 S 2 Coordination as a Platform for Designing Spin-Crossover Materials. Inorg. Chem. 2017, 56, 11096–11103. [Google Scholar] [CrossRef]
  30. Wei, Z.; Xie, X.; Zhao, J.; Huang, L.; Liu, X. A novel hexadentate ligand and its complexes with divalent metal ions (Zinc, Copper, and Cobalt): Synthesis, characterization, and electrochemical investigation. Inorg. Chim. Acta 2012, 387, 277–282. [Google Scholar] [CrossRef]
  31. Funkemeier, D.; Mattes, R. Synthesis and structural studies of copper(II), nickel(II) and cobalt(II) complexes of a 14-membered trans-N2S2 dibenzo macrocycle with two pendant pyridylmethyl groups. J. Chem. Soc. Dalton Trans. 1993, 1313–1319. [Google Scholar] [CrossRef]
  32. Mohamadou, A.; Jubert, C.; Barbier, J.-P. Novel cobalt(II) complexes with pyridyl/ether or pyridyl/thioether ligands. The conversion of pyridyl/thioether cobalt(II) complex to pyridyl/sulfinato cobalt(III) compound. Inorg. Chim. Acta 2006, 359, 273–282. [Google Scholar] [CrossRef]
  33. Magwa, N.P.; Hosten, E.; Watkins, G.M.; Tshentu, Z.R. The coordination and extractive chemistry of the later 3d transition metals with bis ((1 R -benzimidazol-2-yl)methyl)sulfide. J. Coord. Chem. 2013, 66, 114–125. [Google Scholar] [CrossRef]
  34. Hogue, R.W.; Schott, O.; Hanan, G.S.; Brooker, S. A Smorgasbord of 17 Cobalt Complexes Active for Photocatalytic Hydrogen Evolution. Chem. A Eur. J. 2018, 24, 9820–9832. [Google Scholar] [CrossRef]
  35. Wu, H.; Yang, Z.; Wang, F.; Peng, H.; Zhang, H.; Wang, C.; Wang, K. V-shaped ligand 1,3-bis(1-ethylbenzimidazol-2-yl)-2-thiapropane and manganese(II), cobalt(II) and copper(II) complexes: Synthesis, crystal structure, DNA-binding properties and antioxidant activities. J. Photochem. Photobiol. B Biol. 2015, 148, 252–261. [Google Scholar] [CrossRef]
  36. Pandiyan, T.; Hernández, J.G.; Medina, N.T.; Bernés, S. Geometrical isomers of bis(benzimidazol-2-ylethyl)sulfide)cobalt(II) diperchlorates: Synthesis, structure, spectra and redox behavior of pink-[Co(bbes)2](ClO4)2 and blue-[Co(bbes)2](ClO4)2. Inorg. Chim. Acta 2004, 357, 2570–2578. [Google Scholar] [CrossRef]
  37. Singh, A.K.; Mukherjee, R. Cobalt(ii) and cobalt(iii) complexes of thioether-containing hexadentate pyrazine amide ligands: C–S bond cleavage and cyclometallation reaction. J. Chem. Soc. Dalt. Trans. 2008, 260–270. [Google Scholar] [CrossRef] [PubMed]
  38. Nandi, S.; Bannerjee, D.; Datta, P.; Lu, T.H.; Slawin, A.M.Z.; Sinha, C. Cobalt-thioalkylazoimidazole complexes: Structures, spectra and redox properties. Polyhedron 2009, 28, 3519–3525. [Google Scholar] [CrossRef]
  39. Thomas, L.; Hsiung, T.; Breen, J.; Worrell, J.H. Kinetics of substitution and isomerization of nitrite ion on aqua(7-methyl-4, 10-dithia-1, 7, 13- triazatridecane)cobalt(III) and the structure of the product. J. Coord. Chem. 1992, 26, 15–34. [Google Scholar]
  40. Eaborn, C. Purification of Laboratory Chemicals. J. Organomet. Chem. 1981. [Google Scholar] [CrossRef]
  41. Cobas, J.C.; Sardina, F.J. Nuclear magnetic resonance data processing. MestRe-C: A software package for desktop computers. Concepts Magn. Reson. 2003, 19A, 80–96. [Google Scholar] [CrossRef]
  42. Sheldrick, G.M. SHELXT—Integrated space-group and crystal-structure determination. Acta Crystallogr. Sect. A Found. Adv. 2015, 71, 3–8. [Google Scholar] [CrossRef] [Green Version]
  43. Sheldrick, G.M. Crystal structure refinement with SHELXL. Acta Crystallogr. Sect. C Struct. Chem. 2015, 71, 3–8. [Google Scholar] [CrossRef]
  44. Dolomanov, O.V.; Bourhis, L.J.; Gildea, R.J.; Howard, J.A.K.; Puschmann, H. OLEX2: A complete structure solution, refinement and analysis program. J. Appl. Crystallogr. 2009, 42, 339–341. [Google Scholar] [CrossRef]
Sample Availability: Not available.
Scheme 1. Synthesis of the Ligand (L) starting from 2,5-bis(chloromethyl)-1,3,4-thiadiazole (1).
Scheme 1. Synthesis of the Ligand (L) starting from 2,5-bis(chloromethyl)-1,3,4-thiadiazole (1).
Molecules 25 00855 sch001
Figure 1. χΜT vs. T data for the compounds C1 (dots) and C2 (squares). The Data is given per molecule.
Figure 1. χΜT vs. T data for the compounds C1 (dots) and C2 (squares). The Data is given per molecule.
Molecules 25 00855 g001
Figure 2. Sketch of the pseudo centrosymmetry of the complex cation representative for all three structures of C1 and C2.
Figure 2. Sketch of the pseudo centrosymmetry of the complex cation representative for all three structures of C1 and C2.
Molecules 25 00855 g002
Figure 3. Coordination octahedron for the metal(II) ion of C1 and C2.
Figure 3. Coordination octahedron for the metal(II) ion of C1 and C2.
Molecules 25 00855 g003
Figure 4. Crystal structures of the complex cations of C2 (asymmetric unit) with thermal ellipsoids at (a) 120 K and (b) 250 K. Hydrogens, solvent molecules and counter ions have been omitted for clarity. Color code: Co is dark blue, N blue, S yellow, and C grey.
Figure 4. Crystal structures of the complex cations of C2 (asymmetric unit) with thermal ellipsoids at (a) 120 K and (b) 250 K. Hydrogens, solvent molecules and counter ions have been omitted for clarity. Color code: Co is dark blue, N blue, S yellow, and C grey.
Molecules 25 00855 g004
Figure 5. Schematic representation of the two coordination modes for the sulphur donor atoms. (a) The sulphur donor atoms are coordinating cis to each other, which is necessary to obtain dinuclear complexes. (b) The sulphur donor atoms are coordinating trans to each other, as described for the mononuclear complexes herein.
Figure 5. Schematic representation of the two coordination modes for the sulphur donor atoms. (a) The sulphur donor atoms are coordinating cis to each other, which is necessary to obtain dinuclear complexes. (b) The sulphur donor atoms are coordinating trans to each other, as described for the mononuclear complexes herein.
Molecules 25 00855 g005
Table 1. Selected bond lengths [Å] and bond angles [°] for the compounds [FeII(L)2](ClO4)2 (C1) and [CoII(L)2](ClO4)2 (C2).
Table 1. Selected bond lengths [Å] and bond angles [°] for the compounds [FeII(L)2](ClO4)2 (C1) and [CoII(L)2](ClO4)2 (C2).
Selected Parameters [a]C1 (@173 K)C2 (@120 K)C2 (@250 K)
M-NTDA(L)1.967(1)1.979(4)2.057(2)
M-NPy(L)2.014(1)2.019(4)2.075(2)
M-NTDA(L′)1.964(1)1.981(4)
M-NPy(L′)2.016(1)2.027(4)
M-S(L)2.263(1)2.472(2)2.479(1)
M-S(L′)2.264(1)2.470(2)
cis NTDA-M-NPy84.1–95.984.6–95.685.1, 94.1
cis NTDA-M-S85.3–94.882.9–97.483.8, 96.2
cis NPy-M-S84.8–95.283.2–96.782.8, 97.2
av. trans X-M-X179.8179.6180.0
[a] NTDA = N donor atom on thiadiazole; NPy = N donor atom pyridine; X = S, NTDA or NPy donor atom.

Share and Cite

MDPI and ACS Style

Fürmeyer, F.; Münzberg, D.; Carrella, L.M.; Rentschler, E. First Cobalt(II) Spin Crossover Compound with N4S2-Donorset. Molecules 2020, 25, 855. https://doi.org/10.3390/molecules25040855

AMA Style

Fürmeyer F, Münzberg D, Carrella LM, Rentschler E. First Cobalt(II) Spin Crossover Compound with N4S2-Donorset. Molecules. 2020; 25(4):855. https://doi.org/10.3390/molecules25040855

Chicago/Turabian Style

Fürmeyer, Fabian, Danny Münzberg, Luca M. Carrella, and Eva Rentschler. 2020. "First Cobalt(II) Spin Crossover Compound with N4S2-Donorset" Molecules 25, no. 4: 855. https://doi.org/10.3390/molecules25040855

Article Metrics

Back to TopTop