Copper bis-Dipyridoquinoxaline Is a Potent DNA Intercalator that Induces Superoxide-Mediated Cleavage via the Minor Groove

Herein, we report the synthesis, characterisation, X-ray crystallography, and oxidative DNA binding interactions of the copper artificial metallo-nuclease [Cu(DPQ)2(NO3)](NO3), where DPQ = dipyrido[3,2-f:2′,3′-h]quinoxaline. The cation [Cu(DPQ)2]2+ (Cu-DPQ), is a high-affinity binder of duplex DNA and presents an intercalative profile in topoisomerase unwinding and viscosity experiments. Artificial metallo-nuclease activity occurs in the absence of exogenous reductant but is greatly enhanced by the presence of the reductant Na-L-ascorbate. Mechanistically, oxidative DNA damage occurs in the minor groove, is mediated aerobically by the Cu(I) complex and is dependent on both superoxide and hydroxyl radical generation. To corroborate cleavage at the minor groove, DNA oxidation of a cytosine–guanine (5′-CCGG-3′)-rich oligomer was examined in tandem with a 5-methylcytosine (5′-C5mCGG-3′) derivative where 5mC served to sterically block the major groove and direct damage to the minor groove. Overall, both the DNA binding affinity and cleavage mechanism of Cu-DPQ depart from Sigman’s reagent [Cu(1,10-phenanthroline)2]2+; however, both complexes are potent oxidants of the minor groove.


Introduction
Since the structural elucidation of duplex DNA, the construction of small molecules that recognise and react at specific sites to modify DNA structure, reactivity and biological repair processes has been an area of considerable research interest. The discovery of the synthetic chemical nuclease [Cu(1,10-phenanthroline) 2 ] 2+ (Cu-Phen) in 1979, sparked efforts toward the development of new artificial metallonucleases with DNA cleavage mediated through the generation of reactive oxygen species (ROS) at the DNA interface [1]. A kinetic study revealed that the nuclease activity of the Cu(II) complex firstly involves reduction to the activated Cu(I) species, which binds reversibly to double-stranded DNA, while the second step involves oxidation of the non-covalently bound Cu(I) species by H 2 O 2 (or O 2 ) to generate reactive oxygen species (ROS) responsible for strand scission [2]. Cu-Phen degrades DNA in a mechanism involving hydrogen atom abstraction from the C1 deoxyribose position, resulting in the production of the C1 radical as a major oxidative product. The C1 site is only accessible by minor groove binding agents oriented toward H-1 , such as Cu-Phen and its derivatives [3,4]. Other targets of oxidative attack via the minor groove include C-H bonds located at C4 and C5 promising antitumoral [11,12], antifungal [13], antimicrobial [14,15] and protein engineering properties. [16] However, limitations associated with the Cu-Phen scaffold include (i) weak DNA binding constant; (ii) binds both DNA and protein biomolecules without specificity; (iii) a high dissociation constant of the second coordinated 1,10 phenanthroline ligand; and (iv) a reliance on an exogenous reductant (ascorbate or thiols) and oxidant to initiate ROS production to mediate C-H bond activation and strand scission [7]. Accordingly, modulation of the Cu-Phen scaffold represents an interesting developmental challenge. To circumvent dissociation of the second Phen group, the Clip-Phen ligand was developed to link both Phen ligands via their C2-or C3-carbons by a short flexible arm ( Figure 1) [17,18]. Another significant property of this ligand is that its primary amine can be functionalised with sequence-directing groups including minor groove binders netropsin and distamycin [19][20][21][22][23], intercalating acridine conjugates [24], or oligonucleotides [25] to localise nuclease activity.
Our interest in developing new chemical nucleases with high efficacy and enhanced targeting properties prompted this study, where we report the synthesis and X-ray structural characterisation of [Cu(dipyrido[3,2-f:2′,3′-h]quinoxaline)2(NO3)](NO3). The aim of this study was to investigate what influence two DPQ ligands have within the core Cu-(N,N′)2 complex when applied as an artificial chemical nuclease. Additionally, the DNA binding and oxidative DNA damage profile of Cu-DPQ was compared to the well-studied Cu-Phen and Cu-DPQ-Phen complexes previously developed in our laboratory [32,33].  [32]. The current study focuses on the preparation and chemical nuclease activity of Cu-DPQ (assuming dissociation of nitrato ligand in solution).  [32]. The current study focuses on the preparation and chemical nuclease activity of Cu-DPQ (assuming dissociation of nitrato ligand in solution).

Experimental
Our interest in developing new chemical nucleases with high efficacy and enhanced targeting properties prompted this study, where we report the synthesis and X-ray structural characterisation of [Cu(dipyrido[3,2-f :2 ,3 -h]quinoxaline) 2 (NO 3 )](NO 3 ). The aim of this study was to investigate what influence two DPQ ligands have within the core Cu-(N,N ) 2 complex when applied as an artificial chemical nuclease. Additionally, the DNA binding and oxidative DNA damage profile of Cu-DPQ was compared to the well-studied Cu-Phen and Cu-DPQ-Phen complexes previously developed in our laboratory [32,33].

Materials and Methods
Chemicals and reagents were sourced from Sigma-Aldrich (St. Louis, MO, USA) or Tokyo Chemical Industry (TCI, Oxford, UK Ltd.) and were used without further purification. High-performance liquid chromatography (HPLC)-grade chloroform (CHCl 3 ), methanol (MeOH) and acetonitrile (CH 3 CN) were used as received. 1 H and 13 C-NMR spectra were obtained using a Bruker AC 400 and 600 MHz NMR spectrometer. pH was monitored by a Mettler Toledo InLab Expert Pro-ISM pH probe (Columbus, OH, USA). Electrospray ionization mass spectra (ESI-MS) were recorded using a Thermo Fisher Exactive Orbitrap (Waltham, MA, USA) mass spectrometer coupled to an Advion TriVersa Nanomate (Ithaca, NY, USA) injection system with samples prepared in 100% HPLC-grade CH 3 CN prior to analysis. UV-visible spectrometry studies were carried out on a Shimadzu UV-2600. FT-IR spectra were conducted using a Perkin Elmer Spectrum Two Spectrometer (Waltham, MA, USA). For biological studies, complexes were prepared in molecular-biology-grade DMF and further diluted in 80 mM HEPES buffer (Waltham, MA, USA). DNA plasmids and enzymes were purchased from New England BioLabs (NEB, Ipswich, MA, USA). Solutions of the title complex (Cu-DPQ) for biological studies were carried out in DMF with further dilutions made in 80 mM HEPES.

X-Ray Crystallography
The data were collected at 150(2) K on a Bruker-Nonius Apex II CCD diffractometer using MoK α radiation (λ = 0.71073Å) and were corrected for Lorentz and polarisation effects. Data were processed as a 2-component twin and corrected for absorption. The structure was solved by dual-space methods (SHELXT) [37] and refined on F 2 using all the reflections (SHELXL) [38]. All the non-hydrogen atoms were refined using anisotropic atomic displacement parameters and hydrogen atoms bonded to carbon were inserted at calculated positions using a riding model, hydrogen atoms of solvate water were not located or included in the refinement since partial-occupancy and disorder meant no single H-bonding network could be identified. Details for data collection and refinement are summarised in Supplementary S2. CCDC 1959974 contains the supplementary crystallographic data for this paper.

DNA Binding Studies
EtBr displacement, viscosity, and topoisomerase-I-mediated DNA relaxation assay were conducted according to methods previously reported by Kellett et al. [39,40]

DNA Damage Studies
Oxidative DNA damage studies including covalent recognition elements and free radical scavengers on pUC19 were carried out according to published methods [33].

PCR Primer Design
Forward and reverse primers for the pBR322 vector (4361 bp) were designed in order to generate a 798 bp sequence (54% GC) by PCR. The transcript, which contains four individual CCGG sequences (CpG islands), was produced using PCR (35 cycles) with 1 ng pBR322 plasmid (NEB, N3033L) using 2× MyTaq Red Mix (Bioline) at suitable annealing temperatures for the primer pair. The sequence length was verified using a 1 Kb DNA ladder. Further details can be found in Supplementary S5.

Restriction Enzyme Studies
The 798 bp amplicon was exposed to a range of enzymes including HpaII (NEB, R0171S), MspI (NEB, R0106S) and HpaII-MT (NEB, M0214S). A quantity of 400 ng of the amplified sequence was treated with each enzyme for 1 h at 37 • C as per the manufactures' guidelines. Endonuclease recognition at each 5 -C Oxidative DNA damage studies including covalent recognition elements and free radical scavengers on pUC19 were carried out according to published methods [33].

PCR Primer Design
Forward and reverse primers for the pBR322 vector (4361 bp) were designed in order to generate a 798 bp sequence (54% GC) by PCR. The transcript, which contains four individual CCGG sequences (CpG islands), was produced using PCR (35 cycles) with 1 ng pBR322 plasmid (NEB, N3033L) using 2× MyTaq Red Mix (Bioline) at suitable annealing temperatures for the primer pair. The sequence length was verified using a 1 Kb DNA ladder. Further details can be found in Supplementary S5.

Restriction Enzyme Studies
The 798 bp amplicon was exposed to a range of enzymes including HpaII (NEB, R0171S), MspI (NEB, R0106S) and HpaII-MT (NEB, M0214S). A quantity of 400 ng of the amplified sequence was treated with each enzyme for 1 h at 37 °C as per the manufactures' guidelines. Endonuclease recognition at each 5 ⤋ site was confirmed by agarose gel electrophoresis with HpaII and MspI (isoschizomers). Successful methylation of internal cytosine residues (5mC) of each CCGG island by HpaII methyltransferase was confirmed when HpaII was observed to have no restriction effect due to its sensitivity to CpG methylation. Electrophoresis experiments were performed at 60 V for 60 min on a 2% agarose gel.

DNA Damage
A quantity of 400 ng of the 798 bp amplicon was treated with increasing concentrations of Cu-DPQ in the absence and presence of 1 mM of exogenous reductant (Na-L-ascorbate). A further experiment was carried out involving pre-treatment with HpaII methyltransferase and subsequent exposure of the complex in the absence and presence of 1 mM reductant.

Preparation and Characterisation of Cu-DPQ
The dipyrido[3,2-f:2′,3′-h]quinoxaline ligand (DPQ) was prepared using a previously reported method involving Schiff-base condensation of 1,10-phenanthroline-5,6-dione with ethylenediamine [32]. [Cu(DPQ)2(NO3)](NO3) was generated by treating 2 equivalents of DPQ with 1 equivalent of Cu(NO3)2.3H2O under ethanolic reflux and was isolated by vacuum filtration as a green solid. The complex was characterised by elemental analysis, ESI-MS and attenuated total reflectance (ATR) Fourier transform infrared (FTIR) spectroscopies. [Cu(DPQ)2(NO3)](NO3) was isolated in good yield with elemental analysis results for carbon, hydrogen, nitrogen, and copper, in agreement with theoretical values. ESI-MS analysis contained the expected parent ion peak for the cationic complex [Cu(DPQ)2] 2+ (lane1). Characteristic bands for C=C, C=N and C-N stretching of the DPQ ligand were monitored and shifts in both C=N and C-N were noted when the complex was formed ( Figure S2). The electronic spectrum of the complex was measured in the UV-visible range, monitored over time and compared to Cu-Phen and Cu-DPQ-Phen. No notable differences were observed in the d-d transition region (600-900 cm −1 ) upon prolonged incubation; however, the appearance of a new band ~445 cm −1 in the spectrum of all three complexes indicates potentially significant rearrangement in DMF solution ( Figure S3).
Single crystal X-ray structure analysis of the dihydrated complex [Cu(DPQ)2(NO3)](NO3)·2H2O revealed that the asymmetric unit contains two independent, but similar, [Cu(DPQ)2(NO3)] + cations. The copper ions are 5-coordinate and their geometry is close to trigonal bipyrimidal with the nitrate anions in the trigonal plane ( Figure 2); the τ values [41] are 0.75 and 0.77 for Cu1 and Cu2, respectively. The mean planes of the DPQ ligands are inclined at 46.35(9)° about Cu1 and 43.37(9)° at CGG-3 site was confirmed by agarose gel electrophoresis with HpaII and MspI (isoschizomers). Successful methylation of internal cytosine residues (5mC) of each CCGG island by HpaII methyltransferase was confirmed when HpaII was observed to have no restriction effect due to its sensitivity to CpG methylation. Electrophoresis experiments were performed at 60 V for 60 min on a 2% agarose gel.

DNA Damage
A quantity of 400 ng of the 798 bp amplicon was treated with increasing concentrations of Cu-DPQ in the absence and presence of 1 mM of exogenous reductant (Na-L-ascorbate). A further experiment was carried out involving pre-treatment with HpaII methyltransferase and subsequent exposure of the complex in the absence and presence of 1 mM reductant.
[Cu(DPQ) 2 (NO 3 )](NO 3 ) was generated by treating 2 equivalents of DPQ with 1 equivalent of Cu(NO 3 ) 2 .3H 2 O under ethanolic reflux and was isolated by vacuum filtration as a green solid. The complex was characterised by elemental analysis, ESI-MS and attenuated total reflectance (ATR) Fourier transform infrared (FTIR) spectroscopies. [Cu(DPQ) 2 (NO 3 )](NO 3 ) was isolated in good yield with elemental analysis results for carbon, hydrogen, nitrogen, and copper, in agreement with theoretical values. ESI-MS analysis contained the expected parent ion peak for the cationic complex [Cu(DPQ) 2 ] 2+ (lane1). Characteristic bands for C=C, C=N and C-N stretching of the DPQ ligand were monitored and shifts in both C=N and C-N were noted when the complex was formed ( Figure S2). The electronic spectrum of the complex was measured in the UV-visible range, monitored over time and compared to Cu-Phen and Cu-DPQ-Phen. No notable differences were observed in the d-d transition region (600-900 cm −1 ) upon prolonged incubation; however, the appearance of a new band~445 cm −1 in the spectrum of all three complexes indicates potentially significant rearrangement in DMF solution ( Figure S3).
Single crystal X-ray structure analysis of the dihydrated complex [Cu(DPQ) 2 (NO 3 )](NO 3 )·2H 2 O revealed that the asymmetric unit contains two independent, but similar, [Cu(DPQ) 2 (NO 3 )] + cations. The copper ions are 5-coordinate and their geometry is close to trigonal bipyrimidal with the nitrate anions in the trigonal plane ( Figure 2); the τ values [41] are 0.75 and 0.77 for Cu1 and Cu2, respectively. The mean planes of the DPQ ligands are inclined at 46.35 (9) • about Cu1 and 43.37(9) • at Cu2. The cations are π-stacked into zig-zag sheets perpendicular to the c axis ( Figure S4), the spaces between sheets are occupied by the uncoordinated nitrate counter anions and solvate water molecules, which make up a hydrogen-bonded network (incorporating some disorder of both anion and water). The Cambridge Structural Database [42] includes several other examples of structures containing the [Cu(DPQ) 2 X] n+ or [Cu(Phen) 2 X] n+ cations (X = water or anionic ligand, n = 1 or 2). The structures of these cations are broadly similar to that reported here provided the ligand X is a weak donor [43,44] or if there is no fifth donor [45]. However, if X is thiocyanate, azide or, chloride square planar or tetragonal geometries were observed [46]. Cu2. The cations are π-stacked into zig-zag sheets perpendicular to the c axis ( Figure S4), the spaces between sheets are occupied by the uncoordinated nitrate counter anions and solvate water molecules, which make up a hydrogen-bonded network (incorporating some disorder of both anion and water). The Cambridge Structural Database [42] includes several other examples of structures containing the [Cu(DPQ)2X] n+ or [Cu(Phen)2X] n+ cations (X = water or anionic ligand, n = 1 or 2). The structures of these cations are broadly similar to that reported here provided the ligand X is a weak donor [43,44] or if there is no fifth donor [45]. However, if X is thiocyanate, azide or, chloride square planar or tetragonal geometries were observed [46].

DNA Binding Experiments
To establish how Cu-DPQ interacts with duplex DNA a range of binding studies were conducted. Firstly, the apparent binding constant (Kapp) of the complex to calf thymus DNA was determined using a high-throughput 96-well plate ethidium bromide (EtBr) displacement assay [39]. DNA was treated with an excess of EtBr, which becomes highly fluorescent when bound to DNA. Solutions were then treated with increasing concentrations of Cu-DPQ in order to reduce the fluorescence intensity, which is indicative of the ejection of bound EtBr from DNA. Cu-DPQ displayed high binding affinity in the range of ~10 7 M(bp) −1 . This binding value is superior to that of Cu-Phen (~10 5 M(bp) −1 ) and broadly in line with high-affinity complexes Cu-DPQ-Phen, Cu-DPPZ-Phen and actinomycin D ( Figure 3A) [32]. To probe the DNA binding mode of Cu-DPQ further, viscosity analysis with salmon testes dsDNA fibres was investigated. Here, hydrodynamic changes revealed an increasing trend in viscosity (relative to complex loading) indicative of extension and unwinding effects associated with intercalation. The extent of unwinding elicited by Cu-DPQ surpassed that of Cu-Phen and EtBr ( Figure 3B).
The topoisomerase-I-mediated DNA relaxation assay was next applied to study the intercalative effects of Cu-DPQ on supercoiled (SC) plasmid DNA ( Figure 3C). This experiment was monitored by gel electrophoresis as DNA isoforms migrate at different rates through agarose due to their size and charge. Generally, intercalation results in the gradual relaxation of negatively (-) supercoiled plasmid to relaxed open circular (0) plasmid and upon further drug loading, the plasmid becomes unwound in the opposite direction resulting in positively (+) coiled SC DNA [47]. Cu-DPQ was observed to relax (-) SC plasmid to its OC form at ~2.5 µM, beyond which (+) SC topoisomers were identified. At high complex concentrations of 20 and 50 µM (lanes 14 and 15), DNA nicking was identified whereby a fixed band remains in line with the OC isoform. These results are broadly equivalent to those observed for the ternary Cu-DPQ-Phen complex ( Figure S6A) and represent an ∼8-fold enhancement in the unwinding effects of the semi-intercalator Cu-Phen ( Figure S6B).

DNA Binding Experiments
To establish how Cu-DPQ interacts with duplex DNA a range of binding studies were conducted. Firstly, the apparent binding constant (K app ) of the complex to calf thymus DNA was determined using a high-throughput 96-well plate ethidium bromide (EtBr) displacement assay [39]. DNA was treated with an excess of EtBr, which becomes highly fluorescent when bound to DNA. Solutions were then treated with increasing concentrations of Cu-DPQ in order to reduce the fluorescence intensity, which is indicative of the ejection of bound EtBr from DNA. Cu-DPQ displayed high binding affinity in the range of~10 7 M(bp) −1 . This binding value is superior to that of Cu-Phen (~10 5 M(bp) −1 ) and broadly in line with high-affinity complexes Cu-DPQ-Phen, Cu-DPPZ-Phen and actinomycin D ( Figure 3A) [32]. To probe the DNA binding mode of Cu-DPQ further, viscosity analysis with salmon testes dsDNA fibres was investigated. Here, hydrodynamic changes revealed an increasing trend in viscosity (relative to complex loading) indicative of extension and unwinding effects associated with intercalation. The extent of unwinding elicited by Cu-DPQ surpassed that of Cu-Phen and EtBr ( Figure 3B).
The topoisomerase-I-mediated DNA relaxation assay was next applied to study the intercalative effects of Cu-DPQ on supercoiled (SC) plasmid DNA ( Figure 3C). This experiment was monitored by gel electrophoresis as DNA isoforms migrate at different rates through agarose due to their size and charge. Generally, intercalation results in the gradual relaxation of negatively (-) supercoiled plasmid to relaxed open circular (0) plasmid and upon further drug loading, the plasmid becomes unwound in the opposite direction resulting in positively (+) coiled SC DNA [47]. Cu-DPQ was observed to relax (-) SC plasmid to its OC form at~2.5 µM, beyond which (+) SC topoisomers were identified. At high complex concentrations of 20 and 50 µM (lanes 14 and 15), DNA nicking was identified whereby a fixed band remains in line with the OC isoform. These results are broadly equivalent to those observed for the ternary Cu-DPQ-Phen complex ( Figure S6A) and represent an ∼8-fold enhancement in the unwinding effects of the semi-intercalator Cu-Phen ( Figure S6B).

DNA Damage Studies on SC pUC19
The cleavage efficiency of Cu-DPQ was monitored by agarose gel electrophoresis over a narrow concentration range of 0.25 µM, 0.50 µM, 1.0 µM, and 2.5 µM ( Figure 4A, lanes 2-5). Cu-DPQ was initially reduced to the active Cu(I) state with 1 mM exogenous reductant (Na-L-ascorbate) prior to the introduction of plasmid DNA. Cu-DPQ showed concentration-dependent relaxation of SC to OC with almost complete degradation upon treatment with 2.5 µM of the complex. The cleavage efficiency of Cu-DPQ on pUC19 is greater than Cu-DPQ-Phen and Cu-Phen complexes, illustrating the influence of the bis-ligated DPQ ligand on oxidative DNA damage [33]. Interestingly, in the absence of reductant, Cu-DPQ is capable of 'self-activation' since the emergence of OC DNA is visible in the presence of 2.5 µM of this complex with higher concentrations emerging at 10 µM ( Figure 4B, lane 5).
To determine how the complex cleaves plasmid DNA, pUC19 was pre-treated with an excess of non-covalent recognition agents including methyl green (major groove binder), netropsin (minor groove binder) and cobalt(III) hexamine chloride (electrostatic binder). Pre-incubation with methyl green ( Figure 4A lanes 6-9) resulted in enhanced nuclease activity compared to methyl green free experiments (lanes 2-5). However, priming the plasmid with netropsin (lanes 10-13) afforded notable protection to the minor groove resulting in a reduction in oxidative DNA damage. Finally, pretreatment with the electrostatic binding agent had negligible effects (lanes [14][15][16][17]. These results are in agreement with those previously reported with Cu-Phen, Cu-Phen-DPQ and Cu-TPMA-N,N′ complexes where the presence of methyl green results in enhanced chemical nuclease activity due to its minor groove priming effects [1,33,34].

DNA Damage Studies on SC pUC19
The cleavage efficiency of Cu-DPQ was monitored by agarose gel electrophoresis over a narrow concentration range of 0.25 µM, 0.50 µM, 1.0 µM, and 2.5 µM ( Figure 4A, lanes 2-5). Cu-DPQ was initially reduced to the active Cu(I) state with 1 mM exogenous reductant (Na-L-ascorbate) prior to the introduction of plasmid DNA. Cu-DPQ showed concentration-dependent relaxation of SC to OC with almost complete degradation upon treatment with 2.5 µM of the complex. The cleavage efficiency of Cu-DPQ on pUC19 is greater than Cu-DPQ-Phen and Cu-Phen complexes, illustrating the influence of the bis-ligated DPQ ligand on oxidative DNA damage [33]. Interestingly, in the absence of reductant, Cu-DPQ is capable of 'self-activation' since the emergence of OC DNA is visible in the presence of 2.5 µM of this complex with higher concentrations emerging at 10 µM ( Figure 4B, lane 7).
To determine how the complex cleaves plasmid DNA, pUC19 was pre-treated with an excess of non-covalent recognition agents including methyl green (major groove binder), netropsin (minor groove binder) and cobalt(III) hexamine chloride (electrostatic binder). Pre-incubation with methyl green ( Figure 4A lanes 6-9) resulted in enhanced nuclease activity compared to methyl green free experiments (lanes 2-5). However, priming the plasmid with netropsin (lanes 10-13) afforded notable protection to the minor groove resulting in a reduction in oxidative DNA damage. Finally, pre-treatment with the electrostatic binding agent had negligible effects (lanes [14][15][16][17]. These results are in agreement with those previously reported with Cu-Phen, Cu-Phen-DPQ and Cu-TPMA-N,N complexes where the presence of methyl green results in enhanced chemical nuclease activity due to its minor groove priming effects [1,33,34]. To probe the DNA damage profile of Cu-DPQ, a range of radical scavengers were introduced to the nuclease experiment to investigate the nature of ROS species involved in DNA oxidation ( Figure 4C). This study identified the superoxide radical (O 2 •− ) as a key radical involved in the scission process as pre-treatment with tiron (4,5-dihydroxy-1,3-benzenedisulfonic acid disodium salt) significantly impeded oxidative damage to the plasmid ( Figure 4D, lane 12). Moderate protection was afforded by potassium iodide (KI, Figure 4D, lanes 1-4) and dimethyl sulfoxide (DMSO, Figure 4D, lanes 13-16), which scavenge H 2 O 2 and • OH species, respectively. Singlet oxygen ( 1 O 2 ), however, does not appear to play a significant role in the oxidative cleavage mechanism of Cu-DPQ. The overall trend in damage inhibition follows O 2 •− > H 2 O 2 • OH > 1 O 2 and departs substantially from Cu-Phen and Cu-DPQ-Phen where hydroxyl radical generation predominates [33]. Interestingly, we previously identified that O 2 •− plays a major role in oxidative profile of [Cu(o-phthalate)(1,10-phenanthroline)] and the Cu-TPMA-N,N series [31,34]. Finally, copper chelating agents ethylenediaminetetraacetic acid (EDTA) and neocuprione were shown to afford full protection to the SC substrate ( Figure S7). To probe the DNA damage profile of Cu-DPQ, a range of radical scavengers were introduced to the nuclease experiment to investigate the nature of ROS species involved in DNA oxidation ( Figure  4C). This study identified the superoxide radical (O2 •− ) as a key radical involved in the scission process as pre-treatment with tiron (4,5-dihydroxy-1,3-benzenedisulfonic acid disodium salt) significantly impeded oxidative damage to the plasmid ( Figure 4D, lane 12). Moderate protection was afforded by potassium iodide (KI, Figure 4D, lanes 1-4) and dimethyl sulfoxide (DMSO, Figure 4D, lanes 13-16), which scavenge H2O2 and • OH species, respectively. Singlet oxygen ( 1 O2), however, does not appear to play a significant role in the oxidative cleavage mechanism of Cu-DPQ. The overall trend in damage inhibition follows O2 •− > H2O2 ≃ • OH > 1 O2 and departs substantially from Cu-Phen and Cu-DPQ-Phen where hydroxyl radical generation predominates [33]. Interestingly, we previously identified that O2 •− plays a major role in oxidative profile of [Cu(o-phthalate)(1,10phenanthroline)] and the Cu-TPMA-N,N′ series [31,34]. Finally, copper chelating agents ethylenediaminetetraacetic acid (EDTA) and neocuprione were shown to afford full protection to the SC substrate ( Figure S7).

Studies with CpG and Methylated CpG Islands
To probe the DNA oxidation profile of Cu-DPQ further, cleavage experiments involving a 798 bp dsDNA sequence (amplified from pBR322) containing four distinct cytosine-phosphate-guanine (CpG) islands (5 -CCGG-3 ) were undertaken. The internal cytosine residues of this transcript were methylated using HpaII methyltransferase (HpaII-MT) to generate an equivalent amplicon with four 5 -C5mCGG-3 sites ( Figure 5AII and Figure 5B lane 3). To verify the presence of four CpG islands, the non-methylated sequence was treated with HpaII and isoschizomer MspI. Both enzymes recognise and cleave the 5 -C

PCR Primer Design
Forward and reverse primers for the pBR322 vector (4361 bp) were designed in order to generate a 798 bp sequence (54% GC) by PCR. The transcript, which contains four individual CCGG sequences (CpG islands), was produced using PCR (35 cycles) with 1 ng pBR322 plasmid (NEB, N3033L) using 2× MyTaq Red Mix (Bioline) at suitable annealing temperatures for the primer pair. The sequence length was verified using a 1 Kb DNA ladder. Further details can be found in Supplementary S5.

Restriction Enzyme Studies
The 798 bp amplicon was exposed to a range of enzymes including HpaII (NEB, R0171S), MspI (NEB, R0106S) and HpaII-MT (NEB, M0214S). A quantity of 400 ng of the amplified sequence was treated with each enzyme for 1 h at 37 °C as per the manufactures' guidelines. Endonuclease recognition at each 5 ⤋ site was confirmed by agarose gel electrophoresis with HpaII and MspI (isoschizomers). Successful methylation of internal cytosine residues (5mC) of each CCGG island by HpaII methyltransferase was confirmed when HpaII was observed to have no restriction effect due to its sensitivity to CpG methylation. Electrophoresis experiments were performed at 60 V for 60 min on a 2% agarose gel.

DNA Damage
A quantity of 400 ng of the 798 bp amplicon was treated with increasing concentrations of Cu-DPQ in the absence and presence of 1 mM of exogenous reductant (Na-L-ascorbate). A further experiment was carried out involving pre-treatment with HpaII methyltransferase and subsequent exposure of the complex in the absence and presence of 1 mM reductant.

Preparation and Characterisation of Cu-DPQ
The dipyrido[3,2-f:2′,3′-h]quinoxaline ligand (DPQ) was prepared using a previously reported method involving Schiff-base condensation of 1,10-phenanthroline-5,6-dione with ethylenediamine [32]. [Cu(DPQ)2(NO3)](NO3) was generated by treating 2 equivalents of DPQ with 1 equivalent of Cu(NO3)2.3H2O under ethanolic reflux and was isolated by vacuum filtration as a green solid. The complex was characterised by elemental analysis, ESI-MS and attenuated total reflectance (ATR) Fourier transform infrared (FTIR) spectroscopies. [Cu(DPQ)2(NO3)](NO3) was isolated in good yield with elemental analysis results for carbon, hydrogen, nitrogen, and copper, in agreement with theoretical values. ESI-MS analysis contained the expected parent ion peak for the cationic complex [Cu(DPQ)2] 2+ (lane1). Characteristic bands for C=C, C=N and C-N stretching of the DPQ ligand were monitored and shifts in both C=N and C-N were noted when the complex was formed ( Figure S2). The electronic spectrum of the complex was measured in the UV-visible range, monitored over time and compared to Cu-Phen and Cu-DPQ-Phen. No notable differences were observed in the d-d transition region (600-900 cm −1 ) upon prolonged incubation; however, the appearance of a new band ~445 cm −1 in the spectrum of all three complexes indicates potentially significant rearrangement in DMF solution ( Figure S3).
Single crystal X-ray structure analysis of the dihydrated complex [Cu(DPQ)2(NO3)](NO3)·2H2O revealed that the asymmetric unit contains two independent, but similar, [Cu(DPQ)2(NO3)] + cations. The copper ions are 5-coordinate and their geometry is close to trigonal bipyrimidal with the nitrate anions in the trigonal plane ( Figure 2); the τ values [41] are 0.75 and 0.77 for Cu1 and Cu2, respectively. The mean planes of the DPQ ligands are inclined at 46.35(9)° about Cu1 and 43.37(9)° at CGG-3 tract to produce the desired fragmentation pattern ( Figure 5AI and Figure 5B lanes 4 and 5; supplementary S5). HpaII is sensitive to CpG methylation and was inactive against the 5mC sequence ( Figures 5AIII and 5B lane 7), while isoschizomer MspI is insensitive to DNA methylation and cleaved all four methylation sites ( Figure 5AIV and Figure 5B lane 6).
Molecules 2019, 24, x; doi: FOR PEER REVIEW www.mdpi.com/journal/molecules non-methylated sequence was treated with HpaII and isoschizomer MspI. Both enzymes recognise and cleave the 5′-C⤋CGG-3′ tract to produce the desired fragmentation pattern ( Figure 5AI and 5B lanes 4 and 5; supplementary S5). HpaII is sensitive to CpG methylation and was inactive against the 5mC sequence ( Figure 5BIII and 5D lane 7), while isoschizomer MspI is insensitive to DNA methylation and cleaved all four methylation sites ( Figure 5AIV and 5D lane 6). Cleavage experiments with Cu-DPQ in the absence of reductant were then examined using nonmethylated and methylated sequences ( Figure 5CI and II). At the highest tested concentration (30 µM), the non-methylated sequence was extensively sheared while the 5mC amplicon remained intact. Similar experiments were then conducted in the presence of reductant ( Figure 5DI and II). Here, the activated Cu-DPQ complex degraded the non-methylated sequence at 1.0 µM, while shearing of the methylated transcript started at 0.25 µM with almost complete ablation at 0.5 µM. These results indicate that under 'self-activation' conditions (i.e., without reductant), DNA cleavage may occur in the major groove of CpG islands. When these islands contain 5mC residues, the methyl group serves to sterically block the major groove, thereby preventing Cu-DPQ-mediated oxidation. In its reduced Cu(I) form, Cu-DPQ appears to be a potent oxidant of the minor groove since limiting access to the major groove of CpG islands enhances oxidation. Therefore, 5mC serves to direct the complex to the minor groove-in much the same way as methyl green-and this residency serves to increase the oxidative cleavage effects of Cu-DPQ in its reduced form.

Conclusions
The Cu-DPQ complex was generated in high purity and its structure determined by singlecrystal X-ray crystallography. In the solid state, the crystal of [Cu(DPQ)2(NO3)](NO3)·2H2O revealed the asymmetric unit contains two independent, but similar, [Cu(DPQ)2(NO3)] + cations. The fivecoordinated copper(II) ions [CuN4O] adopt a geometry close to trigonal bipyrimidal with the nitrate Cleavage experiments with Cu-DPQ in the absence of reductant were then examined using non-methylated and methylated sequences ( Figure 5CI and II). At the highest tested concentration (30 µM), the non-methylated sequence was extensively sheared while the 5mC amplicon remained intact. Similar experiments were then conducted in the presence of reductant ( Figure 5DI and II). Here, the activated Cu-DPQ complex degraded the non-methylated sequence at 1.0 µM, while shearing of the methylated transcript started at 0.25 µM with almost complete ablation at 0.5 µM. These results indicate that under 'self-activation' conditions (i.e., without reductant), DNA cleavage may occur in the major groove of CpG islands. When these islands contain 5mC residues, the methyl group serves to sterically block the major groove, thereby preventing Cu-DPQ-mediated oxidation. In its reduced Cu(I) form, Cu-DPQ appears to be a potent oxidant of the minor groove since limiting access to the major groove of CpG islands enhances oxidation. Therefore, 5mC serves to direct the complex to the minor groove-in much the same way as methyl green-and this residency serves to increase the oxidative cleavage effects of Cu-DPQ in its reduced form.

Conclusions
The Cu-DPQ complex was generated in high purity and its structure determined by single-crystal X-ray crystallography. In the solid state, the crystal of [Cu(DPQ) 2 (NO 3 )](NO 3 )·2H 2 O revealed the asymmetric unit contains two independent, but similar, [Cu(DPQ) 2 (NO 3 )] + cations. The five-coordinated copper(II) ions [CuN 4 O] adopt a geometry close to trigonal bipyrimidal with the nitrate anions in the trigonal plane. Cu-DPQ is a high-affinity DNA binder with potent intercalative properties compared to Cu-Phen, as evidenced by the DNA fluorescence displacement assay, viscosity and topoisomerase-I DNA unwinding studies. The complex is capable of 'self-activation' by inducing DNA damage in the absence of exogenous reductant but is greatly enhanced in its presence. The oxidative DNA damage profile of Cu-DPQ was studied in the presence of free radical scavenging species, with results demonstrating the complex to be an efficient oxidiser of pUC19 plasmid DNA mediating oxidative DNA damage predominately through the generation of the superoxide radical species (O 2 •− ) with involvement from the hydroxyl radical ( • OH). By pre-exposing plasmid DNA with non-covalent steric blocking agents of methyl green (major groove) or netropsin (minor groove), the minor groove was identified as the preferred DNA oxidation site. To help confirm this effect, we introduced 5-methylcytosine (5mC) into a 798 bp construct at four individual CpG islands. Here, 5mC served to sterically block the major groove and enhance chemical nuclease activity, thereby supporting preferential oxidative cleavage at the minor groove. This mono-nuclear copper(II) DNA damaging agent represents an interesting therapeutic lead for the treatment of human cancer and warrants future in vitro evaluation.