Next Article in Journal
Developments in Synthetic Application of Selenium(IV) Oxide and Organoselenium Compounds as Oxygen Donors and Oxygen-Transfer Agents
Previous Article in Journal
A New and Efficient Synthesis of 6-O-Methylscutellarein, the Major Metabolite of the Natural Medicine Scutellarin
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Communication

Synthesis of a Novel Cysteine-Incorporated Anthraquinone Derivative and Its Structural Properties

1
Department of Applied Chemistry, Graduate School of Engineering, Osaka Prefecture University, 1-1 Gakuen-cho, Nakaku, Sakai, Osaka 599-8531, Japan
2
Graduate School of Materials Science, Nara Institute of Science and Technology (NAIST), 8916-5, Takayama, Ikoma, Nara 630-0192, Japan
3
Seika Corporation, 1-1-82 Kozaika, Wakayama 641-0007, Japan
*
Authors to whom correspondence should be addressed.
Molecules 2015, 20(6), 10192-10204; https://doi.org/10.3390/molecules200610192
Submission received: 6 March 2015 / Accepted: 22 May 2015 / Published: 3 June 2015
(This article belongs to the Section Organic Chemistry)

Abstract

:
A novel cysteine-incorporated anthraquinone derivative was synthesized, and its molecular structure was determined by X-ray crystal analysis. Each mercapto group was located separately and did not form a disulfide bond, and hydrogen bondings and π-π interaction were observed from the packing structure.

1. Introduction

In the field of artificial molecular modeling, cysteine is an attractive compound because of its unique properties. In living organisms, cysteine plays important roles such as protein folding or antioxidant activity depending on the sulfur moiety it contains [1,2,3]. The protein morphology related to cysteine can change drastically because of the formation of a disulfide bond by oxidation. Therefore, the construction of artificial molecules containing mercapto moieties is difficult, because a multi-step synthes is required owing to the reactivities of the mercapto group. For example, in the case of two adjacent cysteine residues, a disulfide bond is easily formed by oxidation, and occasionally, enzymes work well by exploiting such reactivities of cysteine.
In recent times, anthraquinone has been focused on as a functional molecule in photo- or electrochemical moieties, and also has a rigid planar structure at the molecular level [4,5,6,7,8,9,10,11]. Such properties of anthraquinone have been exploited to synthesize functional ligands as metal receptors [12,13,14,15]. Although bioconjugated molecules containing cysteine and some molecular structures have been reported [16,17,18,19], synthetic examples of anthraquinone derivatives bearing amino acids are still rare [20]. Therefore, in order to realize the incorporation of cysteine residues into anthraquinone, amino acid-containing functional molecules have been investigated.
From these viewpoints, the construction of cysteine-containing artificial molecules is important for opening up new possibilities for elucidating the functionalities of cysteine. Herein, we report the synthesis and structural properties of a novel cysteine-incorporated anthraquinone derivative.

2. Results and Discussion

According to the reported method [21], cysteine was converted to S-trityl-L-cysteine methyl ester (2) as shown in Scheme 1. At first, the mercapto group of cysteine was protected by a trityl group. S-Trityl-L-cysteine methyl ester (2) was prepared by esterification by using SOCl2.
Scheme 1. Preparation of S-trityl-l-cysteine methyl ester 2.
Scheme 1. Preparation of S-trityl-l-cysteine methyl ester 2.
Molecules 20 10192 g005
Anthraquinone-1,8-dicarbonyl dichloride (5) was prepared from 1,8-dichloroanthraquinone in three steps (Scheme 2). Anthraquinone-1,8-dicarboxylic acid (4) was prepared [22], followed by chlorination with SOCl2 [20].
Scheme 2. Preparation of anthraquinone-1,8-dicarbonyl dichloride 5.
Scheme 2. Preparation of anthraquinone-1,8-dicarbonyl dichloride 5.
Molecules 20 10192 g006
After the coupling reaction of 2 and 5, the reaction mixture was subjected to silica-gel column chromatography to afford anthraquinone bearing S-trityl-L-cysteine methyl esters 6. Deprotection was conducted using triethylsilane and trifluoroacetic acid, and product anthraquinone bearing L-cysteine methyl esters 7 was also purified by silica-gel column chromatography (Scheme 3). From the 1H- and 13C-NMR, IR, and mass spectral measurements, 7 was synthesized successfully.
Scheme 3. Synthetic route for preparing cysteine-incorporated anthraquinone 7.
Scheme 3. Synthetic route for preparing cysteine-incorporated anthraquinone 7.
Molecules 20 10192 g007
To apply this synthetic protocol to other chalcogen-containing amino acids, L-methionine methyl ester and L-selenomethionine methyl ester were also introduced into the anthraquinone system, successfully affording methionine-anthraquinone (8) and selenomethionine-anthraquinone (9), respectively (Scheme 4). L-Methionine methyl ester hydrochloride and L-selenomethionine methyl ester hydrochloride were prepared in the same manner as that of S-trityl-L-cysteine (shown in Scheme 1) and treated with 5. After purification of the respective reaction mixtures by column chromatography, the corresponding anthraquinone bearing L-methionine methyl esters 10 and anthraquinone bearing L-selenomethionine methyl esters 11 were obtained. We also attempted to apply this protocol to selenocysteine-incorporated anthraquinone, however, the corresponding trityl-group-protected selenocysteine could not be obtained from commercially available L-selenocystine (Se(Cys)2).
Scheme 4. Synthesis of methionine- and selenomethionine-incorporated anthraquinones.
Scheme 4. Synthesis of methionine- and selenomethionine-incorporated anthraquinones.
Molecules 20 10192 g008
To clarify the molecular structure, recrystallization of each anthraquinone derivatives was carried out and a single crystal was successfully obtained by recrystallization of compound 7 from acetonitrile. The molecular structure as determined by X-ray crystal analysis is shown in Figure 1.
Figure 1. ORTEP drawing of 7 with ellipsoids at 50% probability. Hydrogen atoms are omitted for clarity. Blue, red, yellow, and black atoms indicate N, O, S, and C, respectively.
Figure 1. ORTEP drawing of 7 with ellipsoids at 50% probability. Hydrogen atoms are omitted for clarity. Blue, red, yellow, and black atoms indicate N, O, S, and C, respectively.
Molecules 20 10192 g001
The two cysteine chains of 7 were oriented in a similar manner, and the two carbonyl groups at the 1,8-positions were incorporated perpendicularly to the anthraquinone rings with torsion angles of 61.09° and 83.04°, respectively [23,24,25,26,27,28,29]. About the anthraquinone moiety, in contrast to the reported structure, both benzene rings were twisted with a torsion angle of 8.25°. Each mercapto group was located individually, and the distance between them was 7.205 Å in the molecule. Table 1 summarizes the selected bond lengths and angles.
Table 1. Selected bond lengths (Å) and bond angles (°).
Table 1. Selected bond lengths (Å) and bond angles (°).
Bond Lengths (Å)Bond Angles (°)
S1–C171.8098(19)S1–C17–C16114.01(13)
S2–C221.810(2)S2–C22–C21114.27(13)
O1–C11.217(2)C20–N2–C21120.32(15)
O2–C81.221(2)C15–N1–C16121.67(15)
O3–C151.229(2)N1–C15–C6116.48(15)
O6–C201.228(2)N2–C20–C10116.00(15)
N1–C151.339(2)C9–C10–C20122.98(16)
N2–C201.346(2)C7–C6–C15125.68(15)
C6–C151.504(3)N2–C21–C22113.14(15)
C10–C201.511(2)N1–C16–C17108.90(14)
C16–C171.524(3)
C21–C221.527(2)
By contrast, intermolecular interactions were also clearly observed. Figure 2 and Figure 3 show the packing diagrams along the a and c axies, respectively. Anthraquinone moieties were stacked over each other by π-π interactions, and the distance between the planes formed by the middle ring of the anthraquinone moiety calculated using C(1)–C(2)–C(7)–C(8)–C(9)–C(14) atoms is 3.593 Å (Table 2). According to reported crystal structure of anthraquinone derivatives bearing dicarbonyl groups, anthraquinone-2,3-dicarboxylic acid (abbreviated as H2AQDC) coordinates with the metal ion species to afford metal complexes [25]. As compared to the π-π interactions of CaAQDC and ZnAQDC with that of compound 7, distances of π-π interaction distances are 3.04 Å (Ca complex) and 3.56 Å (Zn complex) calculated by PLATON (Table 3) [11]. In the crystal of 7, hydrogen bonding was observed between the carbonyl group incorporated at C6 and the peptide amine, and the selected distances and angles were 0.88 Å (N-H), 2.08 Å (N-H ∙∙∙ O=C), and 2.89 Å and 153° (N-H ∙∙∙ O) (Table 4) [30].
Figure 2. Packing diagram of the unit cell along the a axis. Hydrogen atoms are omitted for clarity.
Figure 2. Packing diagram of the unit cell along the a axis. Hydrogen atoms are omitted for clarity.
Molecules 20 10192 g002
Figure 3. Packing diagram of the unit cell along the c axis. Hydrogen atoms are omitted for clarity. Intermolecular hydrogen bondings are indicated by dotted blue lines.
Figure 3. Packing diagram of the unit cell along the c axis. Hydrogen atoms are omitted for clarity. Intermolecular hydrogen bondings are indicated by dotted blue lines.
Molecules 20 10192 g003
Table 2. π-π interactions (Å, °).
Table 2. π-π interactions (Å, °).
Cg(I) Cg(J)CgCgAlphaCgI_PerpCgJ_Perp
Cg(1)Cg(2) (i)3.9249(12)4.45(9)3.7289(8) 3.6403(8)
Cg(3)Cg(1) (i)3.7590(11)0.89003.4720(8) 3.3207(8)
Cg(3)Cg(2) (i)4.0899(11)0.03553.5948(8) 3.5693(8)
Cg(1), Cg(2) and Cg(3) are the centroids of the C(1)–C(2)–C(7)–C(8)–C(9)–C(14), C(2)–C(3)–C(4)–C(5)–C(6)–C(7) and C(9)–C(10)–C(11)–C(12)–C(13)–C(14) rings, respectively. CgCg = distance between ring centroids; Alpha = dihedral angle between planes I and J; CgI_Perp = perpendicular distance of Cg(I) on ring J; CgJ_Perp = perpendicular distance of Cg(J) on ring I; Slippage = distance between Cg(I) and perpendicular projection of Cg(J) on ring I.: 3.498 Å (Cg(1)–Cg(1)), 3.393 Å (Cg(2)–Cg(2)), and 3.829 Å (Cg(3)–Cg(3)). Symmetry codes: (i) −1 + X, Y, Z.
Table 3. Comparison of π-π interactions (Å).
Table 3. Comparison of π-π interactions (Å).
CompoundsCgCgCgI_PerpSlippage
7a3.5932(8)b
Ca complexa3.0382(13)b
Zn complex4.063(4)3.557(3)1.964
CgCg = distance between the central rings of anthraquinone: a 5.0147(12) Å (7): 5.960(3) Å (Ca complex). Slippage = distance between the central rings of anthraquinone: b 3.498 Å (7): 5.127 Å (Ca complex).
Table 4. Hydrogen-bond geometry (Å, °).
Table 4. Hydrogen-bond geometry (Å, °).
D–H ••• AD–HH ••• AD ••• AD–H ••• A
N1–H3 ••• O3 (i)0.882.082.890(2)153
Symmetry codes: (i) −1 + X, Y, Z.
The molecules are linked into an infinite chain along the a-axis by hydrogen bonds, and mercapto groups were free from forming hydrogen bondings. Intra- or intermolecular disulfide bonds (-S-S-) were not formed in the crystal, and this was also supported by a 1H-NMR measurement in solution. From these results, this molecule may act as metal receptor for recognizing metal ions coordinated by mercapto groups between two cysteine strands.
The photochemical properties were elucidated from the UV-vis and fluorescence spectra. Compound 7 was dissolved in acetonitrile (2.0 × 10−3 M) and measurements were carried out (Figure 4a). In the UV-vis spectrum, an absorbance peak was observed at 335 nm (ε = 110) [31]. The solid-state spectrum was also measured by depositing onto Pyrex glass (Figure 4b). Although a broadened peak was observed around 400–500 nm, there was no shift in the absorbance peak, thus each amide group is oriented in a perpendicular manner. The fluorescence excited at 350 nm appeared at 400–600 nm in Supplementary Materials (Fluorescence spectra of 7), which corresponds to the anthraquinone moiety as reported [23,24,25,26].
Figure 4. UV-vis. spectra of 7 (a) in acetonitrile (2.0 × 103 M); (b) casted onto Pyrex slide glass.
Figure 4. UV-vis. spectra of 7 (a) in acetonitrile (2.0 × 103 M); (b) casted onto Pyrex slide glass.
Molecules 20 10192 g004

3. Experimental Section

3.1. General

All chemicals were purchased from Aldrich (St. Louis, MO, USA), Wako (Osaka, Japan), TCI (Tokyo, Japan), and Nacalai (Kyoto, Japan). The starting materials 2 and 5 were prepared by modifying the reported procedures as described below. All reagents and solvents were used without further purification. 1H-NMR spectra were recorded on a JNM-AL 400 (400 MHz) spectrometer (JEOL, Tokyo, Japan) using CDCl3 as the solvent with Me4Si as the internal standard. 13C-NMR spectra were taken on a JEOL JNM-GSX-400 (100 MHz) spectrometer using CDCl3 as the solvent. The purification of the products were carried out by MPLC (silica gel, 25–40 µm, length 310 mm, i.d. 25 mm), preparative TLC (PTLC) on Wakogel B-5F silica gel, or using a recycling preparative HPLC (Model LC-908, Japan Analytical Industry Co. Ltd., Tokyo, Japan) equipped with JAIGEL-1H and -2H columns (GPC) using CHCl3 as an eluent. IR, HR-mass spectra, UV-vis. and fluorescence spectra were determined on a JEOL JMS-700, FT/IR-8900 Fourier Transform Infrared Microsampling System (JASCO, Tokyo, Japan), JASCO V-560 and JASCO FP-6300, respectively. X-ray crystallographic measurements were carried out on a RAXIS-RAPID diffractometer (Rigaku, Tokyo, Japan) with Mo-Kα radiation. The resulting report and PRATON files are in Supplementary Materials.

3.2. Synthesis of S-Trityl-l-cysteine (1)

L-Cysteine hydrochloride (10.0 g, 63.4 mmol) and trityl chloride (27.0 g, 96.9 mmol) were stirred in DMF (40 mL) for 2 days at room temperature. A 10% sodium acetate solution (350 mL) was then added, and the precipitate was filtered and washed with distilled water. Afterward, the residue was stirred in acetone at 50 °C for 30 min and filtered after cooling. The residue was washed with little acetone and diethyl ether. After drying in vacuo, 20.5 g (89%) of 1 was obtained as a white powder: mp 195 °C (dec); 1H-NMR (DMSO-d6) δ 2.34–2.39 (m, 1H), 2.52–2.56 (m, 1H), 2.86–2.89 (m, 1H), 7.27–7.37 (m, 15H).

3.3. Synthesis of S-Trityl-l-cysteine Methyl Ester (2)

S-Trityl-l-cysteine (3.2 g, 8.0 mmol) was added to methanol (70 mL) to form a suspension. After cooling to 0–5 °C, thionyl chloride (23 mL, 320 mmol) was added, and the reaction mixture was allowed to warm for 20 h at room temperature. The mixture was then refluxed for 5 h, cooled, and evaporated in vacuo. After drying in vacuo, compound 2 (3.2 g, 98%) was obtained as crystalline solid. 1H-NMR (DMSO-d6) δ 2.46–2.64 (m, 2H), 3.67 (s, 3H), 3.72–3.78 (m, 1H), 7.24–7.33 (m, 15H).

3.4. Synthesis of 1,8-Dicyanoanthraquinone (3)

1,8-Dichloroanthraquinone (1.39 g, 5.0 mmol) and CuCN (1.34 g, 15 mmol) were slurried in DMA (50 mL) and refluxed under N2 for 3 h. The hot brown solution was poured onto ice (700 g), and the brown-green precipitate was filtered and washed with water. The copper complex was decomposed with 3 N HNO3 (150 mL) at 60 °C for 5 h. The brown solid was filtered, washed with water and air-dried. This procedure afforded crude 3 (1.2 g, 88%).

3.5. Synthesis of Anthraquinone-1,8-dicarboxylic Acid (4)

1,8-Dicyanoanthraquinone (3, 2.4 g, 9.3 mmol) was refluxed in 70% H2SO4 (500 mL) for 1 h. The hot solution was poured onto ice (500 g) to precipitate crude 4 as a brown solid (2.6 g, 94%).

3.6. Synthesis of Anthraquinone-1,8-dicarbonyl Dichloride (5)

Anthraquinone-1,8-dicarboxylic acid (4, 2.4 g, 9.3 mmol) was refluxed in thionyl chloride (11 mL, 150 mmol) for 20 h. After drying in vacuo, compound 5 was obtained as a black solid and used without further purification.

3.7. Synthesis of 6

Anthraquinone-1,8-dicarboxylic acid (1.60 g, 6 mmol) was refluxed in SOCl2 (10 mL) in two-necked flask (100 mL) for 6 h. After refluxing, the solution was removed in vacuo to give dark-brown solid, anthraquinone-1,8-dicarbonyl chloride. After adding dry CH2Cl2 (30 mL) and S-trt-Cys(OMe) hydrochloride (5.38 g, 13 mmol) into the flask, the solution was stirred at 0 °C in the ice bath under inert atomosphere with dropwise addition of diisopropylethylamine (4.31 mL, 25 mmol). The resulting mixture was allowed to warm to ambient temperature and was stirred overnight. After evaporation of solvents, CHCl3 (20 mL) was added and the mixture was extracted with 1 N HCl (20 mL), sat. NaHCO3 (20 mL), H2O (20 mL) and sat. brine (20 mL). The organic layer was dried by MgSO4 and evaporated the CHCl3. The resulting brown oil was purified by silica gel column chromatography (Rf = 0.37, eluant hexane/EtOAc = 1:1) to yield 42% of anthraquinone-S-trt-Cys(OMe) (yellow solid). 1H-NMR (400 MHz, CDCl3) δ 2.73–2.84 (m, 4H), 3.73 (s, 6H), 4.67–4.71 (m, 2H), 6.13 (d, 6.88 Hz, 2H), 7.11–7.42 (m, 15H), 7.72–7.81 (m, 4H), 8.36 (dd, 1.36 Hz, 4.56 Hz, 2H); 13C-NMR (100 MHz, CDCl3) δ 33.7, 52.2, 52.8, 67.0, 126.9, 128.1, 128.7, 129.6, 131.2, 133.4, 133.8, 134.2, 137.7, 144.5, 168.5, 170.6, 181.4, 182.0.

3.8. Synthesis of 7

Anthraquinone-S-trt-Cys(OMe) (2.49 g, 2.53 mmol) was dissolved in CH2Cl2 (20 mL) in a 100 mL round-bottomed flask, and triethylsilane (1.2 mL, 7.53 mmol) and TFA (19.4 mL, 0.26 mol) were added. The reaction mixture was subsequently stirred at ambient temperature under an inert atmosphere for 30 min. Solvents were removed, and the residue was purified by silica-gel column chromatography (Rf = 0.2, eluant MeOH). Mp 218–220 °C (decomp.); 1H-NMR (400 MHz, CDCl3) δ 1.90 (t, J = 8.7 Hz, 2H), 3.07–3.14 (m, 2H), 3.47–3.55 (m, 2H), 3.82 (s, 6H), 5.12–5.15 (m, 2H), 6.78 (d, J = 7.3 Hz, 2H), 7.71 (dd, J = 1.4, 7.7 Hz, 2H), 7.82 (t, J = 7.3 Hz, 2H), 8.37 (dd, J = 1.4, 7.7 Hz, 2H); 13C-NMR (100 MHz, CDCl3) δ 26.2, 52.9, 54.4, 128.7, 130.3, 133.3, 133.8, 134.2, 137.6, 168.7, 170.4, 181.4, 182.0; IR (KBr, cm1) 1541.0, 1637.5, 1683.7, 1739.7 (C=O); HRMass (FAB) Calcd. for C24H23O8N2S2 (M + H+) 531.0896 Found: 531.0897 MR Mass. Calcd for C24H23O8N2S2; Found (M + H+) 531.0896.

3.9. Crystal Structures of 7

Of the 23,904 reflections were collected, 5463 were unique (Rint = 0.0368); equivalent reflections were merged. The linear absorption coefficient, µ, for Mo-Kα radiation is 2.771 cm−1. An empirical absorption correction was applied which resulted in transmission factors ranging from 0.823 to 0.992. The data were corrected for Lorentz and polarization effects.
The structure was solved by direct methods1 and expanded using Fourier techniques. The non-hydrogen atoms were refined anisotropically. Hydrogen atoms were refined using the riding model.
Crystallographic data: formula weight = 530.57; orthorhombic; space group P212121; a = 5.01471(10) Å, b = 18.6873(3) Å, c = 25.4365(6) Å; V = 2383.70(8) Å3, Z = 4; ρcalcd = 1.478 g cm−3; total reflections collected = 23,904; GOF = 1.081; R1 = 0.0362; wR2 = 0.0925. Crystallographic data have been deposited with Cambridge Crystallographic Data Centre (CCDC-867403). These data can be obtained free of charge via http://www.ccdc.cam.ac.uk/conts/retrieving.html (or from the CCDC, 12 Union Road, Cambridge CB2 1EZ, UK; Fax: +44 1223 336033; E-mail: [email protected]).

3.10. Synthesis of 10

Anthraquinone-1,8-dicarbonyl chloride (0.24 g, 0.72 mmol) was prepared as described in the synthesis of 7 and dissolved in dry CH2Cl2 (20 mL) and methionine methylester hydrochloride (0.24 g, 1.44 mmol) was added into the flask, the solution was stirred at 0 °C in the ice bath under an inert atomosphere with dropwise addition of diisopropylethylamine (0.5 mL, 2.88 mmol). The resulting mixture was allowed to warm to ambient temperature and was stirred overnight. After evaporation of solvents, the resulting brown oil was purified by silica gel column chromatography without extraction (Rf = 0.11, eluant hexane/EtOAc = 1:1) to yield 49% of anthraquinone-Met(OMe) (yellow solid). Mp 78–80 °C; 1H-NMR (400 MHz, CDCl3) δ 2.07 (s, 6H), 2.05–2.25 (m, 4H), 2.58–2.66 (m, 4H), 3.72 (s, 6H), 4.85 (td, J = 8.0 Hz, 12.0 Hz, 2H), 7.01 (d, J = 8.0 Hz, 2H), 7.54–7.60 (m, 4H), 8.06 (dd, J = 4.0 Hz, 8.0 Hz, 2H); 13C-NMR (100 MHz, CDCl3) δ 15.2, 29.8, 31.1, 52.0, 52.3, 128.1, 130.5, 132.7, 133.6, 133.8, 137.4, 168.6, 172.2, 181.2, 181.5; IR (KBr, cm1) 1438.8, 1523.7, 1678.0, 1743.5 (C=O), 3340.5 (NH); Mass (FAB) Calcd. for C28H30O8N2S2 (M + H+) 587. Found: 587.

3.11. Synthesis of 11

Anthraquinone-1,8-dicarbonyl chloride (0.409 g, 1.22 mmol) was prepared as described in the synthesis of 7 and dissolved in dry CH2Cl2 (30 mL) and selenomethionine methylester hydrochloride (0.606 g, 2.45 mmol) was added into the flask, the solution was stirred at 0 °C in the ice bath under inert atomosphere with dropwise addition of diisopropylethylamine (0.855 mL, 4.88 mmol). The resulting mixture was allowed to warm to ambient temperature and was stirred overnight. After evaporation of solvents, the resulting brown oil was purified by silica gel column chromatography without extraction (Rf = 0.11, eluant hexane/EtOAc = 1:1) to yield 75% of anthraquinone-SeMet(OMe) (yellow solid). Mp 88–90 °C; 1H-NMR (400 MHz, CDCl3) δ 2.01 (s, 6H), 2.17–2.23 (m, 2H), 2.28–2.37 (m, 2H), 2.62–2.74 (m, 4H), 3.75 (s, 6H), 4.91 (td, J = 5.5 Hz, 7.8 Hz, 2H), 6.74 (d, J = 7.8 Hz, 2H), 7.60–7.67 (m, 4H), 8.14 (dd, J = 6.0 Hz, 9.2 Hz, 2H); 13C-NMR (100 MHz, CDCl3) δ 4.3, 20.6, 32.7, 52.5, 53.2, 128.5, 130.8, 133.0, 133.9, 134.1, 137.7, 168.7, 172.3, 181.5, 181.8; IR (KBr, cm1) 1577.7, 1647.1, 1678.0, 1743.5 (C=O), 3267.2 (NH); HRMass (FAB) Calcd. for C24H22N2O8Se2 (M + H+) 683.0411. Found: 683.0417.

4. Conclusions

In summary, we synthesized novel cysteine-, methionine-, and selenomethionine-incorporated anthraquinone derivatives. A single crystal of cysteine-incorporated anthraquinone was obtained, and its crystal structure was successfully confirmed. Intermolecular hydrogen bonds were observed in the crystal structure of 7, and the molecules are linked into an infinite chain by hydrogen bonding. Although the results of UV-vis. spectra in solution and in the solid state indicated that the intermolecular interaction does not seem to be so strong, this molecule may act as a metal receptor based on the cysteine moieties, as the mercapto groups are individually detected, without the formation of disulfide and hydrogen bonds. The investigation of the electrochemical and coordination properties of this derivative is currently underway.

Supplementary Materials

Supplementary materials can be accessed at: https://www.mdpi.com/1420-3049/20/06/10192/s1.

Acknowledgments

This work is supported by Scientific Research (B, 25288028 and C, 26410056) from the Ministry of Education, Culture, Sports, Science and Technology, Japan. The authors thank the Nara Institute of Science and Technology of the Kyoto-Advanced Nanotechnology Network for their assistance with the mass spectrometry measurements.

Author Contributions

T.T., Y.M. and A.O. designed research; S.K., K.K., and S.Y. performed research and analyzed the data; A.N. wrote the paper. All authors read and approved the final manuscript.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Jacob, C.; Glies, G.I.; Giles, N.M.; Sies, H. Sulfur and Selenium: The Role of Oxidation State in Protein Structure and Function. Angew. Chem. Int. Ed. 2003, 42, 4742–4758. [Google Scholar] [CrossRef] [PubMed]
  2. Iwaoka, M.; Ooka, R.; Nakazato, T.; Yoshida, S.; Oishi, S. Synthesis of Selenocysteine and Selenomethionine Derivatives from Sulfur-Containing Amino Acids. Chem. Biodivers. 2008, 5, 359–374. [Google Scholar] [CrossRef] [PubMed]
  3. Chalker, J.M.; Bernardes, G.J.L.; Lin, Y.A.; Davis, B.G. Chemical Modification of Proteins at Cysteine: Opportunities in Chemistry and Biology. Chem. Asian J. 2009, 4, 630–640. [Google Scholar] [CrossRef] [PubMed]
  4. Nakanishi, W.; Hayashi, S.; Itoh, N. First linear alignment of five C–Se···O···Se–C atoms in anthraquinone and 9-(methoxy)anthracene bearing phenylselanyl groups at 1,8-positions. Chem. Commun. 2003, 1, 124–125. [Google Scholar] [CrossRef]
  5. Suzuki, A.; Hasegawa, M.; Ishii, M.; Matsumura, S.; Toshima, K. Anthraquinone derivatives as a new family of protein photocleavers. Bioorg. Med. Chem. Lett. 2005, 15, 4624–4627. [Google Scholar] [CrossRef] [PubMed]
  6. Hayashi, S.; Nakanishi, W. How Are Non-Bonded G···Z (Z = O, S, and Se) Distances at Benzene 1,2-, Naphthalene 1,8-, and Anthracene 1,8,9-Positions Controlled? An Approach to Causality in Weak Interactions. Bull. Chem. Soc. Jpn. 2009, 82, 712–722. [Google Scholar] [CrossRef]
  7. Kobori, Y.; Fuki, M. Protein-Ligand Structure and Electronic Coupling of Photoinduced Charge-Separated State: 9,10-Anthraquinone-1-sulfonate Bound to Human Serum Albumin. J. Am. Chem. Soc. 2011, 133, 16770–16773. [Google Scholar] [CrossRef] [PubMed]
  8. Zagotto, G.; Ricci, A.; Vasquez, E.; Sandoli, A.; Benedetti, S.; Benedetti, M.; Palumbo, M.; Sissi, C. Tuning G-Quadruplex vs. Double-Stranded DNA Recognition in Regioisomeric Lysyl-Peptidyl-Anthraquinone Conjugates. Bioconjug. Chem. 2011, 22, 2126–2135. [Google Scholar] [CrossRef] [PubMed]
  9. Gandara, F.; Snejko, N.; de Andres, A.; Fernandez, J.R.; Gomez-Sal, J.C.; Gutierrez-Puebla, E.; Monge, A. Stable organic radical stacked by in situ coordination to rare earth cations in MOF materials. RSC Adv. 2012, 2, 949–955. [Google Scholar] [CrossRef]
  10. Milanchian, K.; Abdi, E.; Tajalli, H.; Ahmadi, K.S.; Zakerhamidi, M.S. Nonlinear refractive index of some anthraquinone dyes in 1294–1b liquid crystal. Opt. Commun. 2012, 285, 761–765. [Google Scholar] [CrossRef]
  11. D’Vries, R.F.; Snejko, N.; Gutierrez-Puebla, E.; Iglesias, M.; Monge, M.A. Supramolecular structures via hydrogen bonds and π-stacking interactions in novel anthraquinonedisulfonates of zinc, nickel, cobalt, copper and manganese. Inorg. Chim. Acta 2012, 382, 119–126. [Google Scholar] [CrossRef]
  12. Moriuchi, T.; Watanabe, T.; Ikeda, I.; Ogawa, A.; Hirao, T. Quinone Oxygen-Coordinated Palladium(II) Complexes with Anthraquinone Ligands Bearing N-Heterocyclic Coordination Sites. Eur. J. Inorg. Chem. 2001, 1, 277–287. [Google Scholar] [CrossRef]
  13. Kadarkaraisamy, M.; Mukherjee, D.; Soh, C.C.; Sykes, A.G. Complexation, crystallography, and electrochemistry of new chelating nicotinyl and thiazolyl anthraquinone ligands. Polyhedron 2007, 26, 4085–4092. [Google Scholar] [CrossRef]
  14. Engelhart, D.; Kadarkaraisamy, M.; Sykes, A.D. Monomeric complexes of 1,8-bis (isonicotinyloxy)anthracene-9,10-dione. J. Coord. Chem. 2008, 61, 3887–3894. [Google Scholar] [CrossRef]
  15. Peterson, S.S.; Kirby, T.; Kadarkaraisamy, M.; Hartshorn, R.M. Chelating, bridging, and chain structures within Ag(I) and Cu(I) complexes of bis(nicotinyloxy), bis(isonicotinyloxy), and bis(pyrimidine-5-carboxyloxy)-1,8-disubstituted anthraquinone ligands. Polyhedron 2009, 28, 3031–3035. [Google Scholar] [CrossRef]
  16. Iwaoka, M.; Tomoda, S. A Model Study on the Effect of an Amino Group on the Antioxidant Activity of Glutathione Peroxidase. J. Am. Chem. Soc. 1994, 116, 2557–2561. [Google Scholar] [CrossRef]
  17. Hatten, X.; Weyhermuller, T.; Metzler-Nolte, N. Ferrocenoyl peptides with sulfur-containing side chains: Synthesis, solid state and solution structures. J. Organomet. Chem. 2004, 689, 4856–4867. [Google Scholar] [CrossRef]
  18. Hatten, X.; Bothe, E.; Merz, K.; Huc, I.; Metzler-Nolte, N.A. Ferrocene-Peptide Conjugate as a Hydrogenase Model System. Eur. J. Inorg. Chem. 2008, 29, 4530–4537. [Google Scholar] [CrossRef]
  19. Sase, S.; Aoki, Y.; Abe, N.; Goto, K. Stable Sulfenyl Iodide Bearing a Primary Alkyl Steric Protection Group with a Cavity-shaped Framework. Chem. Lett. 2009, 38, 1188–1189. [Google Scholar] [CrossRef]
  20. Ma, L.; Jiao, P.; Zhang, Q.; Xu, J. Rigid backbone 1,8-anthracene-linked bis-oxazolines (AnBOXes): Design, synthesis, application and characteristics in catalytic asymmetric aziridination. Tetrahedron Asymmetry 2005, 16, 3718–3734. [Google Scholar] [CrossRef]
  21. Rudolph, J.; Theis, H.; Hanke, R.; Endermann, R.; Johannsen, L.; Geschke, F.U. seco-Cyclothialidines: New Concise Synthesis, Inhibitory Activity toward Bacterial and Human DNA Topoisomerases, and Antibacterial Properties. J. Med. Chem. 2001, 44, 619–626. [Google Scholar] [CrossRef] [PubMed]
  22. Rogers, M.E.; Averill, B.A. Symmetrically Trisubstituted Triptycenes. J. Org. Chem. 1986, 51, 3308–3314. [Google Scholar] [CrossRef]
  23. Carlson, S.A.; Hercules, D.M. Delayed Thermal Fluorescence of Anthraquinone in Solutions. J. Am. Chem. Soc. 1971, 93, 5611–5616. [Google Scholar] [CrossRef]
  24. Utsuno, M.; Yutaka, T.; Murata, M.; Kurihara, M.; Tamai, N.; Nishihara, H. Synthesis of Pendant-Type Anthraquinone-Bridged Cofacial Dinuclear Platinum(II) Complexes and Their Emission Properties. Inorg. Chem. 2007, 46, 11291–11296. [Google Scholar] [CrossRef] [PubMed]
  25. Furman, J.D.; Burwood, R.P.; Tang, M.; Mikhailovsky, A.A.; Cheetham, A.K. Understanding ligand-centred photoluminescence through flexibility and bonding of anthraquinone inorganic-organic frameworks. J. Mater. Chem. 2011, 21, 6595–6601. [Google Scholar] [CrossRef]
  26. Yan, W.H.; Bao, S.S.; Ding, L.L.; Lu, C.S.; Meng, Q.J.; Zheng, L.M. Syntheses and characterizations of two-dimensional lanthanide coordination polymers based on anthraquinone-1,4,5,8-tetracarboxylic acid. Inorg. Chem. Commun. 2013, 28, 20–24. [Google Scholar] [CrossRef]
  27. Nomoto, A.; Moriuchi, T.; Yamazaki, S.; Ogawa, A.; Hirao, T. A highly ordered ferrocene system regulated by podand peptide chains. Chem. Commun. 1998, 18, 1963–1964. [Google Scholar] [CrossRef]
  28. Moriuchi, T.; Nomoto, A.; Yoshida, K.; Hirao, T. Characterization of ferrocene derivatives bearing podand dipeptide chains (-L-Ala-L-Pro-OR). J. Organomet. Chem. 1999, 589, 50–58. [Google Scholar] [CrossRef]
  29. Moriuchi, T.; Nomoto, A.; Yoshida, K.; Ogawa, A.; Hirao, T. Chirality Organization of Ferrocenes Bearing Podand Dipeptide Chains: Synthesis and Structural Characterization. J. Am. Chem. Soc. 2001, 123, 68–75. [Google Scholar] [CrossRef] [PubMed]
  30. Spek, A.L. Structure validation in chemical crystallography. Acta Crystallogr. 2009, 148, 148–155. [Google Scholar] [CrossRef] [PubMed]
  31. Langdon, E.E.; Pope, S.J.A. The coordination chemistry of substituted anthraquinones: Developments and applications. Coord. Chem. Rev. 2014, 269, 32–53. [Google Scholar] [CrossRef]
  • Sample Availability: Samples of the compounds 6 and 7 are available from the authors.

Share and Cite

MDPI and ACS Style

Nomoto, A.; Taniguchi, T.; Minatobe, Y.; Katao, S.; Kakiuchi, K.; Yano, S.; Ogawa, A. Synthesis of a Novel Cysteine-Incorporated Anthraquinone Derivative and Its Structural Properties. Molecules 2015, 20, 10192-10204. https://doi.org/10.3390/molecules200610192

AMA Style

Nomoto A, Taniguchi T, Minatobe Y, Katao S, Kakiuchi K, Yano S, Ogawa A. Synthesis of a Novel Cysteine-Incorporated Anthraquinone Derivative and Its Structural Properties. Molecules. 2015; 20(6):10192-10204. https://doi.org/10.3390/molecules200610192

Chicago/Turabian Style

Nomoto, Akihiro, Toshihide Taniguchi, Yuta Minatobe, Syouhei Katao, Kiyomi Kakiuchi, Shigenobu Yano, and Akiya Ogawa. 2015. "Synthesis of a Novel Cysteine-Incorporated Anthraquinone Derivative and Its Structural Properties" Molecules 20, no. 6: 10192-10204. https://doi.org/10.3390/molecules200610192

Article Metrics

Back to TopTop