Next Article in Journal
Daphnoretin Induces Cell Cycle Arrest and Apoptosis in Human Osteosarcoma (HOS) Cells
Next Article in Special Issue
Comparison of Polysaccharides from Two Species of Ganoderma
Previous Article in Journal
A Facile Solvent Free Claisen-Schmidt Reaction: Synthesis of α,α′-bis-(Substituted-benzylidene)cycloalkanones and α,α′-bis-(Substituted-alkylidene)cycloalkanones
Previous Article in Special Issue
Enhancement of Diosgenin Production in Dioscorea zingiberensis Cell Cultures by Oligosaccharides from Its Endophytic Fungus Fusarium oxysporum Dzf17
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Molecules
Volume 17
Issue 1
10.3390/molecules17010584
molecules-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Mixed Biopolymer Systems Based on Starch

by
M. Abd Elgadir
1,
Md. Jahurul Haque Akanda
2,
Sahena Ferdosh
2,
Amid Mehrnoush
3,
Alias A. Karim
2,
Takahiro Noda
4,* and
Md. Zaidul Islam Sarker
5,*
1
Department of Life Sciences, Faculty of Pharmacy, Universiti Teknologi Mara, Shah Alam, Selangor, 42300 Malaysia
2
School of Industrial Technology, Universiti Sains Malaysia, Minden, 11800 Penang, Malaysia
3
Department of Food Technology, Faculty of Food Science and Technology, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia
4
Hokkaido Agricultural Research Center, National Agriculture and Food Research Organization, Shinsei, Memuro, Kasai, Hokkaido 082-0081, Japan
5
Department of Pharmaceutical Technology, Kulliyyah of Pharmacy, International Islamic University, Kuantan Campus, 25200 Kuantan, Pahang, Malaysia
*
Authors to whom correspondence should be addressed.
Molecules 2012, 17(1), 584-597; https://doi.org/10.3390/molecules17010584
Submission received: 14 November 2011 / Revised: 23 December 2011 / Accepted: 26 December 2011 / Published: 9 January 2012
(This article belongs to the Special Issue Natural Polysaccharides: Chemistry, Bioactivity and Analysis)
Browse Figures
Versions Notes

Abstract

:
A binary mixture of starch–starch or starch with other biopolymers such as protein and non-starch polysaccharides could provide a new approach in producing starch-based food products. In the context of food processing, a specific adjustment in the rheological properties plays an important role in regulating production processing and optimizing the applicability, stability, and sensory of the final food products. This review examines various biopolymer mixtures based on starch and the influence of their interaction on physicochemical and rheological properties of the starch-based foods. It is evident that the physicochemical and rheological characteristics of the biopolymers mixture are highly dependent on the type of starch and other biopolymers that make them up mixing ratios, mixing procedure and presence of other food ingredients in the mixture. Understanding these properties will lead to improve the formulation of starch–based foods and minimize the need to resort to chemically modified starch.

1. Introduction

It has long been recognized that starches derived from various botanical sources differ in the composition, structure and molecular order of their polysaccharide constituents (amylose and amylopectin), which could account for differences in their functionality. Starch owes much of its functionality to the fine structure and relative proportion of these polysaccharides, as well as to the physical organization of starch polymers into larger structural domains in the solid state [1].
Biopolymer mixtures are very important because of their great influences on food properties and formulation [2]. The various biopolymers that exist in aqueous mixtures of most food systems and their interaction in several ways produce different attributes which impact on quality, texture, and stability of the food systems. These structures play important roles in different quality attributes of food systems such as texture, flavour release and stability of many products, including dressings, desserts, jellies, and soups [3].
The blending of different types of flours and/or starches is an age-old technique used in the manufacture of various traditional food products. Simple binary mixtures of starch–starch or starch with other biopolymers (such as protein and hydrocolloids) are continuously being studied because such mixtures provide a new approach in producing tailor-made starch-based products. The possibility of formulating starch blends that behave like chemically modified starches; particularly with regard to pasting behavior was reported by Obani et al. [4]. Another objective is the partial substitution of more expensive or not so easily available materials by cheaper or more freely available indigenous flours or starches while maintaining or even improving product quality. In the context of food processing, the specific control and adjustment of the rheological properties is of significance in order to be able to regulate production processes and to optimize applicability, stability, and sensory properties of end products. Understanding such properties will lead to improvements in the formulation of starch-based foods.
Many researchers have reported that when two or more biopolymers are mixed together, the mixtures behaved differently from when they are present individually in a single phase [5,6,7,8]. This phenomenon is known as phase separation, which can be divided into two categories 1-associative phase separation whereby the first phase being enriched in both polymers, 2-segregative phase separation whereby each phase being enriched with one of the two biopolymers. In such mixed gel systems, interaction between polymers occurs. When the concentration of each polymer within the mixture of two or more polymers is higher than the critical gelation concentration, synergistic or antagonist effects can exist between the biopolymers. This phenomenon is generally due to excluded volume effects and water distribution between the phases [9].
The comprehensive review paper on mixed biopolymer system entitled “Starch–Biopolymer Interactions—A Review” was published in 1997 [10]. There have been many developments and papers published since then, not only on mixed starch system but also on starch–other biopolymers systems. Table 1 summarizes some studies conducted in the view of rheological characteristics of mixed biopolymer systems of starch base foods. The interest in studying properties of different biopolymer mixtures based on starch is reported within the past decade. This review, therefore, is intended to piece together the accumulated knowledge and review the trends and some pertinent findings on this subject. It will discuss the effect of mixing different polymers with starches and the effect of such process on the characteristics of the mixtures. The information would provide useful insight for food technologists/formulators to develop innovative starch-based products without the need to use chemically modified starch. Some suggestions for future research directions are also discussed.

2. Starch–Starch/Starch–Flour Systems

The utilization of starch mixtures in food products is not new, but can been traced to the dawn of history. Since ancient times, many types of traditional foods have been made from mixtures of different starches. For example, in the production of rice vermicelli, two different types of starches, usually corn and sago, are used together with rice flour to reduce the raw materials costs. Likewise, fish crackers are usually made from a mixture of tapioca and sago starches. The rationale underlying the use of starch mixtures most likely is due to desirable textural and sensory attributes conferred by the specific mixtures that cannot be obtained from any of the individual starches alone.
Several studies have been conducted based on different properties of starch-starch mixtures (Table 1). Different starch blends proposed as a simple substitute for chemically modified starches were reported by Ortega-Ojeda et al. [18], due to the increasing demand for natural food [4], for example, observed that blends of starches from multiple sources can possess some of the characteristics of chemically modified starches. Common corn, waxy corn, 50% high-amylose corn, wheat, potato, tapioca and rice are examples of such natural starches. It was reported that the characteristics of chemically modified starches could be due to interactions between solubilized portions of one starch with granules of other starches [4]. The study revealed that, with the exception of a wheat/tapioca combination, most of biopolymers blends exhibited very little retrogradation.
The functional properties of mixed starch system are governed by both the extent of gelatinization and retrogradation. It has been shown that the rate of retrogradation of starch gels on aging generally increases with increasing amylose content of the starch [19,20]. For starch mixture, the situation is potentially more complicated than for a single type of starch, since the morphology of starch granules themselves are not homogeneous, and the amylose/amylopectin molecules from each starch possess a definite ultra structure.
Using pulsed low-resolution NMR to monitor retrogradation of mixed rice starch with other starches (corn, potato, sago, and mungbean) in 1: 2 dry starch/water systems, it was found that in any particular mixture, the rate of retrogradation fell between those of the individual component starches [21]. In the absence of any significant interaction between starches, the rate of retrogradation would be expected to be linearly related to the level of substitution of one starch with another starch. This appears to be true for a mixture of mungbean + rice starches [21], potato + rice starches [22] (Figure 1a), and rice + waxy corn maize [22]. Similar additive effect of starch mixtures such as mixtures of potato and waxy maize as well as potato and barley was reported [23].
Table
Table 1. Selected studies on mixed starch-biopolymer systems.
Table 1. Selected studies on mixed starch-biopolymer systems.
Type of starch mixtureExperimentObservationRef.
β-glucans–starch mixturesFour β-glucan preparations, i.e., curdlan (CL), oat (OG), barley (BG) and yeast (YG) β-glucans, were compared for their effects on the gelatinization and retrogradation of rice starch (RS).● The addition of any of these β-glucans significantly increased the peak, breakdown, final, and setback viscosities of RS, whereas the pasting temperatures were significantly decreased by OG or CL addition, but were unaffected by BG or YG addition. ● β-glucans had a negligible effect on the onset (To), peak (Tp), and conclusion (Tc) temperatures but slightly decreased the gelatinization enthalpy ( Molecules 17 00584 i001H1) of RS. Storage of all the gels at 4 °C resulted in a marked decrease in the To, Tp, Tc, and melting enthalpy ( Molecules 17 00584 i002H2) values.[11]
Milk protein–polysaccharide mixturesConcentration of whey protein concentrate (WPC) at 1.0% and the pH 7.0 were mixed with commercial polysaccharides (PS) in concentration of 0.0–1.0%. Interactions between WPC and PS in the aqueous phase were evaluated.● The results revealed differences in the molecular dynamics of mixed systems. ● The nature of the interactions between WPC and PS depended on the PS type, its relative concentration in the aqueous phase and also on the two WPC fractions. ● Whey protein concentrate/sodium alginate (WPC/SA) mixed systems were distinguished by a tendency to protein aggregation in the aqueous phase and their segregation into separated microdomains. ● WPC/λ–carrageenan (WPC/λ–C) mixed systems showed high degree of attractive interactions over the whole range of concentrations.[12]
Hydrocolloid–flour mixtures in batter systemsThe functionalities of hydrocolloid–flour mixtures in terms of the thermal properties of their resulting batter systems were investigated. Gelatinization temperature (TG), total enthalpies of gelatinization (ΔHG), glass transition temperature (Tg), melting peak temperature (Tm), and total melting enthalpies (ΔHm) and the effects of different thermal processes such as cooking-freezing-thawing (CFT) and freezing-cooking (FC) on thermal properties of the various batter systems were determined.● The different thermal processes did not significantly affect either TG or ΔHG of batter systems, but they influenced the glass transition behavior and the ΔHm of batter systems. ● The thermal processes also showed different effects on the batter systems containing different hydrocolloids such as methylcellulose (MC), carboxymethyl–cellulose (CMC), and xanthan gum (XG). ● The hydrocolloids shifted TG upwards, depressed Tg, and increased Tm of batters. ● The effect of these hydrocolloids on glass transition temperature was more pronounced in raw samples (FC process) than in cooked samples and increased with increasing levels of CMC and MC used in the formulations. ● Batters with MC showed increased ΔHm for all the thermal processes.[13]
Non-waxy rice starch–hydrocolloid mixturesThe swelling and pasting properties of non-waxy rice starch–hydrocolloid mixtures were investigated using commercial and laboratory-generated hydrocolloids at low concentration of (0–0.1%).●Hydrocolloids enhanced the trough and final viscosity of rice starch dispersions. ● They also lowered peak viscosity of rice starch dispersions. ● Total setback viscosity appeared to be not affected by hydrocolloids at low concentration (0.05%). ● The hot and cold paste of the starch–gellan gum mixture exhibited the highest viscosity values.[14]
Rice starch–β-glucan mixturesRice starch (RS)-β-glucan (BG) mixture were investigated as functions of mixing ratio and of storage time at concentrations of RS/BG = 6.0/0.0, 5.7/0.3, 5.4/0.6, and 5.0/1.0.●An increase in onset (To), peak (Tp), and conclusion (Tc) temperatures and a decrease in gelatinization enthalpy (ΔH1) with increasing BG concentration. ● Storage of the mixed gels at 4 °C resulted in a decrease in To, Tp, Tc, and melting enthalpy (ΔH2). ● The retrogradation ratio (ΔH2/ΔH1) and the phase transition temperature range (Tc−To) of the mixed gels increased with storage time. ● BG addition also slowed the syneresis of the mixed gels. ● The added BG also retarded the development of gel hardness during refrigerated storage of the RS/BG mixed gels.[15]
Rice starch–hydrocolloid mixturesDynamic viscoelastic and steady flow properties of the freshly prepared pastes of starch alone and starch–hydrocolloid mixtures; cellulose derivatives and carrageenans were determined after holding at room temperature (~25 °C) for 1 h.● Increases in apparent pasting temperatures and peak and final viscosities in the following decreasing order were observed: Methylcellulose > carboxymethyl–cellulose for cellulose derivatives and λ– > í– > κ–carregeenan for carrageenans. ● Slight decreases in peak and final viscosities were observed when hydroxypropyl–methylcellulose was the hydrocolloid.[16]
Corm starch–guar gum mixturesGelatinization behavior of corn starch was studied in the presence or absence of various guar gum samples with different molecular weights in order to clarify the difference in functions of each guar to starch.● Guars with Mw values higher than 12.2 × 105 g/mol shifted the onset of viscosity increase for the system to lower temperatures and increased its peak viscosity upon heating at a relatively low starch concentration. ● The earlier onset of viscosity increase was independent of Mw of guar, while the increase in peak viscosity was dependent on its Mw. ● These guars shifted the onset of viscosity increase for the system upward, on the contrary, at a relatively high starch concentration (e.g., 15%).[17]
A synergistic interaction was noticed when rice and sago starches are mixed [21] (Figure 1b). Similar synergistic effects for a mixture of rice and tapioca starches (1:2 and 2:1) and rice–hydroxypropylated potato starches were also reported by Yao et al. [22]. In both mentioned cases, higher retrogradation tendencies than the respective starch components in the starch mixtures were displayed. It was also observed that low temperature storage (5 °C) not only accelerates starch retrogradation, but also accentuates whatever interactions between the different starch polymers that lead to higher than expected retrogradation rates [21].
Molecules 17 00584 g001 550
Figure 1. Rates of retrogradation (K) of (a) rice/potato starch and (b) rice/sago starch (1:2 dry starch/water ratio) gels at 5, 15, and 25 °C [21].
Figure 1. Rates of retrogradation (K) of (a) rice/potato starch and (b) rice/sago starch (1:2 dry starch/water ratio) gels at 5, 15, and 25 °C [21].
Molecules 17 00584 g001
To explain the sysnergistic interactive effect of starch mixtures, an ideal gelatinized starch mixture system was defined as a fresh mixture of two separately gelatinized starch systems with the same moisture content [22]. This definition is called distribution of regional moisture content (RMC). It is assumed that no moisture redistribution occurs among swollen granules during gelatinization and retrogradation. The distribution of RMC for ideal mixture gel could be described as the sum of the proportional contributions of the two starch components in the mixture [22]. In actual mixture gels, which take place when two different types of starches are mixed at the granular level [22] during gelatinization process, the swollen granules from one starch may contain higher moisture content than the granules from another starch. However, the researchers found that the distribution of RMC in the mixture and the pulsed NMR signal (denoted by S’ in their study) of each individual granules in the system may also be different from those of the ideal gel mixture. Under this circumstance, it was concluded that the S’mix value will not be calculated as the average value of S’1 and S’2 due to the proportion of two starch components, which might result in the non–additive nature of S’. This idea merits consideration and further investigation. Some researchers reported that at low starch concentration (20%), each individual component in the mixture independently gelatinized, whereas at higher starch concentration (50%) they did not [23].
The pasting properties of mixtures of wheat flour mixed with tuber starches namely sweet potato starch (SPS), potato starch (PS), yam starch (YS), and cassava starch (CS), at 10 to 50% starch in the mixtures was reported by Zaidul et al. [24] (Figure 2). RVA was used in the measurement. A significantly (P < 0.05) increase in the peak viscosities was notice with increasing starch content in the mixtures. On the other hand, the control wheat showed too low peak of viscosity which also was out of ranges. Thus, it was found that combining starches with wheat flour for optimizing the viscosity was important processing practice. Similar finding of peak viscosity characteristics was reported in the blend of sago starch and wheat flour from 10 to 50% sago in the mixtures [25]. These trends were supported by similar study results for the mixtures of wheat flour and potato starches with varying contents of amylose and phosphorus [26]. The authors also observed at 40 and 50% PS, dramatic increase in the peak viscosity was noticed which attributed to the lower setback viscosities with 40 and 50% PS in the mixtures. The same phenomenon in the mixtures of sago–wheat and wheat–potato mixtures was observed by Zaidul et al. [25,26].
Molecules 17 00584 g002 550
Figure 2. Typical RVA pasting curves for the mixtures of wheat–PS, wheat–SPS, wheat–YS, and wheat–CS at 30% starch in the mixture [24].
Figure 2. Typical RVA pasting curves for the mixtures of wheat–PS, wheat–SPS, wheat–YS, and wheat–CS at 30% starch in the mixture [24].
Molecules 17 00584 g002

3. Starch–Protein Systems

Starch from cereals, roots and tubers and protein from meat, fish and other sources play major roles in food systems. When mixed in the system, they provide the desirable rheological and textural attributes of food. Starch contributes in physical properties of many food products such as confectionery, sauce, pudding, comminuted meat and fish products and several low–fat products [27]. The stability of food dispersions depend on protein–starch interactions in bulk solutions and at interfaces.
Mixing ratios of 0.15:1, 0.2:1, and 0.3:1 whey protein isolate (WPI)–wheat starch (dry weight basis) and combination of WPI and egg white protein were used by Yang et al. to study the rheological properties of starch and dairy ingredient-based food systems [28]. They found that the changes of storage modulus (G′) of starch–WPI mixtures during the cooling were different from that of starch gel alone. At a low WPI content (1:0.15), G′ decreased during cooling. When they increased the content of WPI to 1:0.2, G′ still decreased, but the reduction was not as much as that at the 1:0.15 levels. When more WPI (1:0.3) was added, G′ was more than that of pure starch gel at 85 °C. When temperature decreased, G′ initially decreased and at 65 °C, G′ started to increase. It was found that unlike hydrogen bonds, hydrophobic interactions are enhanced in warm temperature (40–60 °C) [29]. Therefore, when more WPI was added to the mixture, the effect of hydrophobic bonds on the gel during cooling from 65 to 30 °C, increased. The authors found that when egg white protein was used to replace 50% of the WPI, a decrease in G′ and increase in tan δ could be observed. However, there was a continued increase of gel strength due to hydrophobic interactions at warm temperature and hydrogen bond interactions at cold temperature, during the cooling. They concluded that WPI replacement for egg white protein might be beneficial in increasing elastic modulus and the rigid structure of bakery products during the later stage of baking and during cooling.
Bertolini et al. [30] reported that the addition of sodium caseinate (NaCN) to starch led to an increase in the peak viscosity for all starches with the exception of potato starch, which showed a reduction in peak viscosity (Table 2). The study also showed that NaCN increased final viscosity for all starches. In addition, NaCN did not alter peak temperature for wheat, corn and rice starches, while the presence of NaCN enhanced the peak temperature by 23 °C for potato starch. From differential scanning calorimetry data, the addition of NaCN resulted in definite increases in onset and peak temperatures for gelatinization.
A recent study was carried out to investigate the effects of starch/protein mass ratio (0.2–1.0) and different cooling rate (2, 4 and 6 °C/min) on rheological behavior of the composites [31]. The addition of starch significantly increased the G′ of flaxseed protein concentrate, which is similar to that of the addition of potato starch to acid milk [32] and addition of corn starch to soy protein concentrate [33]. Starch granule–soy protein and wheat protein interactions were investigated by Ryan et al. [34]. The study showed that the adsorption of proteins on starch at 0.2, 3.5 and 5.0 mg/mL protein solution in varying pH. Similar findings were reported in another study [35].
Various starches have been included in meat products such as surimi and low fat sausage for reducing cost and improving texture. Starch added in meat emulsions favors the formation of a more compact and stronger heat induced protein network [36]. Moreover, the addition of pre–gelatinized starch decreased the firmness and water holding capacity of surimi product as compared to the addition of native potato starch [37]. Starch is also used to improve the texture of low fat bologna [38], low fat frankfurters [39], and comminuted scalded sausages [40].
The effect of adding different starches (corn starch, high amylose and waxy corn starch, tapioca starch, potato starch, pea starch, mungbean starch, rice starch and sweet potato starch) to starch–meat complexes was investigated by Li et al. [41]. The authors found that as temperature was raised from 40 to 50 °C, G′ decreased slightly due to the temperature effect. At temperatures lower than 55 °C, the starch–meat complex exhibited a similar G′ to pork ham batter. The initial protein denaturation resulted in an increase in G′. Associated with the gelatinization of starch, there existed a dramatic increase in G′ above 60 °C.
Table
Table 2. Average of RVA parameters for starches with and without sodium caseinate and their significance levels for the starch, caseinate and their interactions [30].
Table 2. Average of RVA parameters for starches with and without sodium caseinate and their significance levels for the starch, caseinate and their interactions [30].
Starch/treatmentpeak viscosity (RVU) afinal viscosity (RVU) aPeak temp. (°C)
ΔPV b ΔFV b ΔPT b
waxy corn244 115 80
waxy corn caseinate393149 20893 833
potato760 261 72
potato caseinate389−371 362101 9523
cassava281 168 88
cassava caseinate403122 287119 913
wheat122 131 95
wheat caseinate14826 269138 950
corn141 140 95
corn caseinate20665 328188 950
rice96 159 95
rice caseinate12327 25192 950
P levels c
starch<0.001 <0.001 <0.001
caseinate0.0308 <0.001 <0.001
starch × caseinate<0.001 <0.001 <0.001
a Rapid Visco Analyzer units; b ΔPV, ΔFV, and ΔPT indicate differences between sodium caseinate-starch and starch systems for peak viscosity, final viscosity, and peak temperature, respectively; c Significance levels (P > F values) in RVA means for different starches, samples with and without sodium caseinate and their interactions.
The thermal processing of fish protein–starch systems was studied by Wu et al. [42]. The researchers observed significant rheological changes during heating. These changes could be due to sol–gel transformation of fish proteins and gelatinization of starches. It was observed that the addition of starch did not affect thermal transitions of fish proteins, as monitored by differential scanning calorimetry [43].

4. Starch–Hydrocolloid Systems

Polysaccharides or hydrocolloids have been studied by many researchers (Table 1). It was found that starch granule swelling or melting during gelatinization was highly influenced by the presence of hydrocolloids and synergistic interactions between hydrocolloids and starch [44]. In general, the viscosity of the mixed system was much greater than that of the starch alone, since most biopolymers are strongly hydrophilic and compete with the starch for water [17].
Starch–gum mixtures (6% w/w starch and 0.35% w/w gum) were studied using RVA in order to investigate the effects of guar and xanthan gums on pasting and rheological properties of native and anionic tapioca starches [45]. The result revealed that compared to the native tapioca starch (as control), additions of guar and xanthan gums resulted in significant (P ≤ 0.05) increases in peak, breakdown, setback and final viscosities, pasting temperatures and peak times (time to reach the peak viscosity), except for guar addition, in which the peak time was unaffected and xanthan addition, in which case setback viscosity decreased significantly (P ≤ 0.05). A similar tendency was also found for the anionic tapioca starch–guar gum mixture as compared with its control (anionic starch alone) [45].
The rheological description of galactoxyloglucan hydrocolloid (HXG) which contained galactose, xylose, and glucose in a 1:3:4 molar ratio was studied by Freitas et al. [46]. HXG was mixed with a high amylose (66%) and waxy corn starch. They found that the value of apparent viscosity at 1.5 s−1 was greater for both mixtures, the increase being the greatest after 20 h storage at 5 °C of high amylose and waxy corn starch solutions at a concentration of 25 g·L−1.
Rheological properties of rice starch–xanthan gum mixtures (5% w/w) at different xanthan gum concentrations (0, 0.2, 0.4, 0.6, and 0.8% w/w) were evaluated in steady and dynamic shear [47]. All the tested samples had highly shear-thinning behavior with values of flow behavior indexes (n) as low as 0.14–0.24. The n values decreased with increase in xanthan gum concentration. From these results, the authors found that the rheological behaviors of rice starch–xanthan gum mixtures were apparently dependent on the concentration of xanthan gum [47].
Increasing xanthan gum concentration from 0.2% to 0.8% caused an increase in the magnitudes of consistency index. This may be attributed to an increase in the viscoelasticity of the continuous phase in starch–gum composite systems due to the thickening properties of xanthan gum [48]. From these observations, it was found that the dynamic rheological properties of rice starch–xanthan gum mixtures were affected by the addition of gum and depended on the gum concentration [47].

5. Directions for Future Study

The increasing number of published papers on this subject signifies the potential of fabricating starch-based products by exploiting the complex interactions of starch–starch and starch–other biopolymers that give rise to diverse textural attributes. The rationale underlying the use of mixed biopolymer systems based on starch most likely is due to desirable textural and sensory attributes conferred by the specific mixtures that cannot be obtained from any of the individual starches alone. In addition, the future may see an emphasis on new methods of using starch rather than the proliferation of chemical derivatives. This means that research should be focused on physical processes or investigating possible synergistic/antagonistic relationships that alter starch characteristics, rather than using chemical modification.
Many of the studies involving mixed starch–based systems are empirical in nature and did not attempt to elucidate the underlying mechanism involved to explain the manifested changes in some functional properties of the system. Present knowledge appears inadequate to formulate a scientific basis for predicting the effects on retrogradation resulting from the blending of different types of native or modified starch. Systematic study using intensive numerical simulations (such as neural network) could be useful in order to build up various models of mixed polymer–starch system and assist the technologists to predict the behavior of such systems.
The synergistic interaction displayed by some starches in mixed systems merits further scrutiny as to the nature of interaction at the molecular level. In cases where the mixture exhibits an additive effect, it is presumed that the starch molecules (amylopectin) from both starches behave independently in the mixture. The rate of retrogradation of the mixtures can, therefore, be predicted by a linear relationship. For synergistic interaction, however, there could be some kind of physical (or possibly chemical) factors that play a role in accentuating retrogradation rate of the mixture, over and above the predicted additive value. The questions arising under this situation is: Just how exactly the granules from two different populations, containing amylose and amylopectin (from both starches) mix and interact within the composite system? There are apparently many factors (such as amylose/amylopectin ratio, chain length, degree of branching of the starch mixtures, degree of gelatinization, extent of starch granule swelling or disruption, phase separation) that can influence the course of such interactions.
Due to the diverse and complex nature of starch and other biopolymers, a broad range and variation in functional properties of the mixed biopolymers would be expected. From the data obtained so far, it is obvious that interactions (if any) between different starches and between starch and other biopolymers when blended are still not well understood. This is particularly so where the phenomenon of starch retrogradation is concerned. While the retrogradation tendencies of individual starches have been studied extensively, those of mixtures of starches have received little attention. Manipulation of the rate or extent of starch retrogradation by the simple expedience of blending different flours or starches is of technological importance to the food industry.

6. Conclusions and Future Outlook

The proper combination of starch–based mixed biopolymer systems provides a convenient approach in achieving desirable functional properties such as pasting, viscosity, viscoelasticity, thermal and textural functionality in the preparation of innovative food products. However, the actual mechanisms of interaction between the polymer constituents are unknown yet and warrant further investigation. An understanding of interactions of various components, especially amylopectin, may be critical to understand the retrogradation behavior of starch mixtures, hence manipulation of the property in formulating starch–based food products. Nevertheless, appropriate blending of different native starches may provide a simple practical avenue for manipulating, at least to some extent, the functional properties and final quality of a starch-based end-product. It is not impossible that starch–based mixture would find wider usage in view of increasing consumer demand for more natural product.

References and Notes

  1. Biliaderis, C.G. Structures and Phase Transitions of Starch Polymers. In Polysaccharide Association Structures in Food; Walter, R.H., Ed.; Marcel Dekker: New York, NY, USA, 1998; pp. 57–168. [Google Scholar]
  2. Tolstoguzov, V.B. Some thermodynamic considerations in food formulation. Food Hydrocolloid. 2003, 17, 1–23. [Google Scholar] [CrossRef]
  3. Okechukwu, P.E.; Anandha Rhao, M. Rheology of structured polysaccharide food systems: Starch and pectin. In Polysaccharide Association Structures in Food; Walter, R.H., Ed.; Marcel Dekker: New York, NY, USA, 1998; pp. 289–328. [Google Scholar]
  4. Obani, M.; BeMiller, J.N. Properties of some starch blends. Cereal Chem. 1997, 74, 431–436. [Google Scholar] [CrossRef]
  5. Piculell, L.; Bergfeldt, K.; Nilsson, S. Factors determining phase behaviour of multi component polymer systems. In Biopolymer Mixtures; Harding, S.E., Hill, S.E., Mitchell, J.R., Eds.; Nottingham NottinghUniversity Press: Nottingham, UK, 1995; pp. 13–35. [Google Scholar]
  6. Doublier, J.-L.; Garnier, C.; Renard, D.; Sanchez, C. Protein–polysaccharide interactions. Curr. Opin. Colloid Interface Sci. 2000, 5, 202–214. [Google Scholar] [CrossRef]
  7. de Kruif, C.G.; Tuinier, R. Polysaccharide protein interactions. Food Hydrocolloid. 2001, 15, 555–563. [Google Scholar] [CrossRef]
  8. Turgeon, S.L.; Beaulieu, M.; Schmitt, C.; Sanchez, C. Protein-polysaccharide interactions: Phase-ordering kinetics, thermodynamic and structural aspects. Curr. Opin. Colloid Interface Sci. 2003, 8, 401–414. [Google Scholar] [CrossRef]
  9. Tolstoguzov, V.B. Some physic-chemical aspects of protein processing in foods. Multicomponent gels. Food Hydrocolloid. 1995, 9, 317–332. [Google Scholar] [CrossRef]
  10. Appleqvist, I.A.M.; Debet, M.R.M. Starch-biopolymer interactions—A review. Food Rev. Int. 1997, 13, 163–224. [Google Scholar] [CrossRef]
  11. Banchathanakij, R.; Suphantharika, M. Effect of different β-glucans on the gelatinisation and retrogradation of rice starch. Food Chem. 2009, 114, 5–14. [Google Scholar] [CrossRef]
  12. Perez, A.A.; Carlos, R.; Carrara, C.C.; Sánchez, C.C.; Rodríguez, P.J.M.; Santiago, L.G. Interactions between milk whey protein and polysaccharide in solution. Food Chem. 2009, 116, 104–113. [Google Scholar] [CrossRef]
  13. Xue, J.; Ngadi, M. Effects of methylcellulose, xanthan gum and carboxymethylcellulose on thermal properties of batter systems formulated with different flour combinations. Food Hydrocolloid. 2009, 23, 286–295. [Google Scholar] [CrossRef]
  14. Song, J.Y.; Kwon, J.Y.; Choi, J.; Kim, Y.C.; Shin, M. Pasting properties of non-waxy rice starch-hydrocolloid mixtures. Starch/Stärke 2006, 58, 223–230. [Google Scholar] [CrossRef]
  15. Satrapai, S.; Suphantharika, M. Influence of spent brewer’s yeast β-glucan on gelatinization and retrogradation of rice starch. Carbohydr. Polym. 2007, 67, 500–510. [Google Scholar] [CrossRef]
  16. Techawipharat, J.; Suphantharika, M.; BeMiller, J.N. Effects of cellulose derivatives and carrageenans on the pasting, paste, and gel properties of rice starches. Carbohydr. Polym. 2008, 73, 417–426. [Google Scholar] [CrossRef]
  17. Funami, T.; Kataoka, Y.; Omoto, T.; Goto, Y.; Asai, I.; Nishinari, K. Effects of non-ionic polysaccharides on the gelatinization and retrogradation behavior of wheat starch. Food Hydrocolloid. 2005, 19, 1–13. [Google Scholar] [CrossRef]
  18. Ortega–Ojeda, F.E.; Larsson, H.; Eliasson, A.C. Gel formation in mixtures of hydrophobically modified potato and high amylopectin potato starch. Carbohydr. Polym. 2005, 59, 313–327. [Google Scholar] [CrossRef]
  19. Teo, C.H.; Seow, C.C. A pulsed NMR method for the study of starch retrogradation. Starch/Stärke 1992, 44, 288–292. [Google Scholar] [CrossRef]
  20. Karim, A.A.; Norziah, M.H.; Seow, C.C. Methods for the study of starch retrogradation. Food Chem. 2000, 71, 9–36. [Google Scholar] [CrossRef]
  21. Karim, A.A.; Teo, C.H.; Norziah, M.H.; Seow, C.C. Retrogradation behaviour of binary starch mixtures of rice starch with other types of starches. In Starch: Advance in Structure and Function; Barsby, T.L., Donald, A.M., Frazier, P.J., Eds.; Royal Society of Chemistry: Cambridge, UK, 2001; pp. 59–66. [Google Scholar]
  22. Yao, Y.; Zhang, J.M.; Ding, X. Retrogradation of starch mixtures containing rice starch. J. Food Sci. 2003, 68, 260–265. [Google Scholar] [CrossRef]
  23. Ortega–Ojeda, F.E.; Eliasson, A.C. Gelatinization and retrogradation behavior of some starch mixtures. Starch/Stärke 2001, 53, 520–529. [Google Scholar] [CrossRef]
  24. Zaidul, I.S.M.; Nik Norulaini, N.A.; Mohd Omar, A.K.; Yamauchi, H.; Noda, T. RVA analysis of mixtures of wheat flour and potato, sweet potato, yam, and cassava starches. Carbohydr. Polym. 2007, 69, 784–791. [Google Scholar] [CrossRef]
  25. Zaidul, I.S.M.; Karim, A.A.; Manan, D.M.A.; Norulaini, N.A.N.; Omar, A.K.M. Gelatinization properties of sago and wheat flour mixtures. ASEAN Food J. 2003, 12, 199–209. [Google Scholar]
  26. Zaidul, I.S.M.; Yamauchi, H.; Kim, S.J.; Hashimoto, N.; Noda, T. RVA study of mixtures of wheat flour and potato starches with different phosphorus content. Food Chem. 2007, 102, 1105–1111. [Google Scholar] [CrossRef]
  27. Hermansson, A.M.; Svegmark, K.C. Development in the understanding of starch functionality. Trends Food Sci. Technol. 1996, 7, 345–353. [Google Scholar] [CrossRef]
  28. Yang, H.; Irudayaraj, J.; Otgonchimeg, S.; Walsh, M. Rheological study of starch and dairy ingredient-based food systems. Food Chem. 2004, 86, 571–578. [Google Scholar] [CrossRef]
  29. Niwa, E. The chemistry of surimi gelation. In Surimi Technology; Lanier, T.C., Lee, C.M., Eds.; Marcel Dekker: New York, NY, USA, 1992; pp. 389–427. [Google Scholar]
  30. Bertolini, A.C.; Creamer, L.K.; Eppink, M.; Boland, M. Some rheological properties of sodium caseinate-starch gels. J. Agric. Food Chem. 2005, 53, 2248–2254. [Google Scholar] [CrossRef]
  31. Wang, B.; Wang, L.; Li, D.; Bhandari, B.; Wu, W.; Shi, J.; Chen, X.D.; Mao, Z. Effects of potato starch addition and cooling rate on rheological characteristics of flaxseed protein concentrate. J. Food Eng. 2009, 91, 392–401. [Google Scholar] [CrossRef]
  32. Oh, H.E.; Anema, S.; Wong, G.M.; Pinder, D.N.; Hemar, Y. Effect of potato starch addition on the acid gelation of milk. Int. Dairy J. 2007, 17, 808–815. [Google Scholar] [CrossRef]
  33. Li, J.Y.; Yeh, A.I.; Fan, K.L. Gelation characteristics and morphology of corn starch/soy protein concentrate composites during heating. J. Food Eng. 2007, 78, 1240–1247. [Google Scholar] [CrossRef]
  34. Ryan, K.J.; Brewer, M.S. In situ examination of starch granule-soy protein and wheat protein interactions. Food Chem. 2007, 104, 619–629. [Google Scholar] [CrossRef]
  35. Eliasson, A.C. On the surface activity of wheat proteins. In Gluten Proteins; Association of cereal research: Detmold, Germany, 1993; pp. 198–206. [Google Scholar]
  36. Carballo, J.; Femandez, P.; Barreto, G.; Solas, M.T.; Colmenro, F.J. Morphology and texture of bologna sausage as related to content of fat, starch and egg white. J. Food Sci. 1996, 61, 652–655. [Google Scholar] [CrossRef]
  37. Chung, K.H.; Lee, C.M. Water binding and ingredient dispersion pattern effect on surimi gel texture. J. Food Sci. 1991, 56, 1263–1266. [Google Scholar] [CrossRef]
  38. Claus, J.R.; Hunt, M.C. Low-fat, high value-added bologna formulated with texture-modifying ingredients. J. Food Sci. 1991, 56, 643–647. [Google Scholar] [CrossRef]
  39. Yang, A.; Trout, G.R.; Shay, B.J. Evaluation of carrageenan, isolated soy protein and a modified starch in low fat frankfurters. In Proceedings of the 41st Annual International Congress of Meat Science and Technology, San Antonio, TX, USA, 20–25 August 1995; Elsevier: Amsterdam, The Netherlands, 1995; 2, pp. 435–436. [Google Scholar]
  40. Pietrasik, Z. Effect of content of protein, fat and modified starch on binding textural characteristics, and colour of comminuted scalded sausages. Meat Sci. 1999, 51, 17–25. [Google Scholar] [CrossRef]
  41. Li, J.Y.; Yeh, A.I. Effects of starch properties on rheological characteristics of starch/meat complexes. J. Food Eng. 2003, 57, 287–294. [Google Scholar] [CrossRef]
  42. Wu, M.C.; Hamann, D.D.; Lanier, T.C. Rheological and clorimetric investigations of starch-fish protein systems during thermal processing. J. Texture Stud. 2007, 16, 53–74. [Google Scholar]
  43. Wu, M.C.; Akahane, T.A.; Lanier, T.C.; Hamann, D.D. Thermal transitions of actomyosin and surimi prepared from Atlantic croaker as studied by DSC. J. Food Sci. 1985, 50, 10–13. [Google Scholar]
  44. Shi, X.; BeMiller, J.N. Effects of food gums on viscosities of starch suspensions during pasting. Carbohydr. Polym. 2002, 50, 7–18. [Google Scholar] [CrossRef]
  45. Chaisawang, M.; Suphantharika, M. Pasting and rheological properties of native and anionic tapioca starches as modified by guar gum and xanthan gum. Food Hydrocolloid. 2006, 20, 641–649. [Google Scholar] [CrossRef]
  46. Freitas, R.A.; Gorin, P.A.J.; Neves, J.; Sierakowski, M.R. A rheological description of mixtures of a galactoxyloglucan with high amylose and waxy corn starches. Carbohydr. Polym. 2003, 51, 25–32. [Google Scholar]
  47. Kim, C.; Yoo, B. Rheological properties of rice starch-xanthan gum mixtures. J. Food Eng. 2006, 75, 120–128. [Google Scholar] [CrossRef]
  48. Alloncle, M.; Doublier, J.L. Viscoelastic properties of maize starch/hydrocolloid pastes and gels. Food Hydrocolloid. 1991, 5, 455–467. [Google Scholar] [CrossRef]
  • Sample Availability: Not available.

Share and Cite

MDPI and ACS Style

Elgadir, M.A.; Akanda, M.J.H.; Ferdosh, S.; Mehrnoush, A.; Karim, A.A.; Noda, T.; Sarker, M.Z.I. Mixed Biopolymer Systems Based on Starch. Molecules 2012, 17, 584-597. https://doi.org/10.3390/molecules17010584

AMA Style

Elgadir MA, Akanda MJH, Ferdosh S, Mehrnoush A, Karim AA, Noda T, Sarker MZI. Mixed Biopolymer Systems Based on Starch. Molecules. 2012; 17(1):584-597. https://doi.org/10.3390/molecules17010584

Chicago/Turabian Style

Elgadir, M. Abd, Md. Jahurul Haque Akanda, Sahena Ferdosh, Amid Mehrnoush, Alias A. Karim, Takahiro Noda, and Md. Zaidul Islam Sarker. 2012. "Mixed Biopolymer Systems Based on Starch" Molecules 17, no. 1: 584-597. https://doi.org/10.3390/molecules17010584

Article Metrics

Back to TopTop