Mineralogical Features of Ore Diagenites in the Urals Massive Sulfide Deposits, Russia

In weakly metamorphosed massive sulfide deposits of the Urals (Dergamysh, Yubileynoe, Yaman-Kasy, Molodezhnoe, Valentorskoe, Aleksandrinskoe, Saf’yanovskoe), banded sulfides (ore diagenites) are recognized as the products of seafloor supergene alteration (halmyrolysis) of fine-clastic sulfide sediments and further diagenesis leading to the formation of authigenic mineralization. The ore diagenites are subdivided into pyrrhotite-, chalcopyrite-, bornite-, sphalerite-, bariteand hematite-rich types. The relative contents of sphalerite-, borniteand barite-rich facies increases in the progression from ultramafic (=Atlantic) to bimodal mafic (=Uralian) and bimodal felsic (=Baymak and Rudny Altay) types of massive sulfide deposits. The ore diagenites have lost primary features within the ore clasts and dominantly exhibit replacement and neo-formed nodular microtextures. The evolution of the mineralogy is dependent on the original primary composition, sizes and proportions of the hydrothermal ore clasts mixed with lithic serpentinite and hyaloclastic volcanic fragments together with carbonaceous and calcareous fragments. Each type of ore diagenite is characterized by specific rare mineral assemblages: Cu–Co–Ni sulfides are common in pyrrhotite-rich diagenites; tellurides and selenides in chalcopyrite-rich diagenites; minerals of the germanite group and Cu–Ag and Cu–Sn sulfides in bornite-rich diagenites; abundant galena and sulfosalts in bariteand sphalerite-rich diagenites and diverse tellurides characterize hematite-rich diagenites. Native gold in variable amounts is typical of all types of diagenites.


Introduction
The origin of banded sulfides in ancient massive sulfide deposits is a key point of discussion between authors favoring "hydrothermal replacement" or brine-pool hydrothermal-sedimentary models versus those preferring a "reworked black smoker" model for the formation of volcanic-hosted massive sulfide (VHMS) deposits [1][2][3]. The fine-grained laminated structure of alternating monomineral layers of pyrite, pyrrhotite, carbonate, quartz, chlorite, magnetite, framboidal and colloform pyrite is consistent with their hydrothermal sedimentary origin. Primary textures are better preserved in some deposits than in others due to their lower degree of deformation [1]. Numerous publications support a hydrothermal-sedimentary model but only a few discuss the possible influence of diagenesis on the textural and mineral evolution of chemically precipitated hydrothermal sulfide sediments [4][5][6][7][8]. In the Urals, Yarosh (1973) first recognized the differences between diagenetic and metamorphic alteration of massive sulfide deposits [9].
Seafloor weathering (halmyrolysis s.s.) and the related dissolution, breakdown and reworking of consolidated ores of ancient sulfide mounds have been suggested for the origin of sulfide breccias and fine-grained sulfide sandstones leading through to full oxidation, leaching and development of enrichment zones [10][11][12]. This model has been confirmed as a viable mechanism through the detailed study of eroded modern smoker mounds, in which supergene enrichment results in complete or partial replacement of primary sulfides by secondary sulfides and the formation of gossans [13][14][15].
The term "halmyrolysis" was suggested by K. Hümmel for seafloor weathering of sediments in basins with low sedimentation rates or in submarine volcanic areas [30]. The Dictionary of Earth Sciences describes halmyrolysis as 'Early diagenesis, modification or decomposition of sediments on the seafloor'. Submarine hydrothermal fields with reactive sulfide sediments are additional environments favorable for halmyrolysis which should include all chemical, biochemical and physicochemical processes of seafloor decay (disintegration, decomposition) of sediments (including clastic sulfides) and/or rocks (including consolidated sulfide ores) due to active interaction with oxygenated seawater during preburial and later stages of diagenesis. Halmyrolysis includes oxidation, dissolution, hydration, ion exchange and other processes of disintegration.
Halmyrolysis, in a similar fashion to continental weathering, includes the decomposition of minerals with the loss of elements, compensated by the gain of seawater and oxygen, but contrasts with the removal of seawater and oxygen from minerals during the process of sediment diagenesis. Halmyrolysis can also continue after diagenesis of sulfide sediments inside the consolidated ores if they are still exposed on the seafloor after primary lithification. Halmyrolysis of sulfide deposits can trigger supergene processes of full oxidation of Fe 2+ accompanied by both the leaching of metals and their enrichment in clastic sulfide sediments [12,17,18,31,32]. The complete seafloor weathering of sediments and rock/ores leads to the formation of silica-rich or ferruginous "halmyrolytes", which have almost completely lost their primary sedimentary features [20].
In this paper, we use the term "diagenesis" to include all types of alteration occurring in sediments prior to their lithification and metamorphism. Diagenesis is a process of compaction, cementation, replacement, crystallization, hydration, dewatering, bacterial activity, and formation of nodules and other forms of authigenic minerals. From the physicochemical viewpoint, diagenesis is an equilibration of minerals with both each other and aquatic environments under conditions of increasing temperature and pressure. Halmyrolysis can be part of the diagenetic process since diagenetic alterations are mostly constructive rather than destructive, occurring largely at the burial stage of lithification. Halmyrolysis can be a recurrent process acting on lithified sulfide mounds and soft sulfide turbidites also. The products of halmyrolytic breakdown can thus be redeposited, whereas diagenesis leads to the formation of lithified rocks/ores. Diagenesis is subdivided into two main stages: early and late. Early diagenesis is the alteration of sediments whilst oxygen is still present in the pore spaces during the preburial stage. In reactive sulfide sediments, the initial process of early diagenesis could be considered a recurrent scenario of halmyrolysis with the dissolution of small ore fragments occurring with the trapped oxygen. Local consumption of oxygen and supersaturation in metals would then be favorable for the crystallization of authigenic sulfides. The replacement of sulfides by new sulfides and iron hydroxides or barite typically occurs during early diagenesis due to the different electrochemical potential of minerals in the presence of an electrolyte like seawater [18]. Late diagenesis is the process of the shallow burial transformation of sediments to lithified sedimentary rocks which would include the formation of pyrite nodules and euhedral pyrite and crystallization, cementation and consolidation of sediment under reducing conditions. After the lithification of sediments, late diagenesis evolves to "catagenesis" [33] or "anadiagenesis" [27], which is a long process of deep-burial epigenetic alteration of rocks/ores prior to metamorphism.
The term diagenite refers to a rock formed by diagenesis. In this paper, the term "ore diagenite" is a product of the diagenetic transformation of sulfide-or barite-rich sediments which have almost completely lost their primary clastic microtextural and mineralogical features by processes including halmyrolysis [19]. In diagenites, "authigenic" minerals are of diagenetic origin, formed in situ.
In weakly metamorphosed massive sulfide deposits of the Urals, the banded sulfides are recognized as seafloor altered clastic sulfide layers intercalated with pyrite cherts, chlorite shales and ferruginous halmyrolites, which are the products of halmyrolysis of lithic sedimentary fragments mixed with sulfides and barite [12,[17][18][19][20]34]. The clastic sulfides range from breccias to turbidites accompanied by an increasing degree of seafloor alteration to the finer, upper part of the layers [22]. The aim of this paper is to highlight the microtextural and mineralogical diversity of ore diagenites formed after sulfide and barite turbidites. Based on these observations, the importance of halmyrolysis and diagenesis in the evolution of clastic sulfides is considered in the range of primary VHMS deposit types.
In the Urals, the deposits are subdivided into five types: Atlantic, Cyprus, Uralian, Baymak, and Rudny Altay, see Figure 2 [35,36,39,41,42,[45][46][47][48][49][50]. This classification can broadly be compared to the classification of Franklin et al. (2005), where Cyprus type is mafic, Uralian type is bimodal-mafic and Baymak and Rudny Altay types are bimodal-felsic types of deposits [51]. In this paper, we consider examples of weakly metamorphosed deposits of Atlantic, Uralian, Baymak, and Rudny Altay types only, avoiding the complexities of metamorphic overprint. The Atlantic-type Dergamysh deposit, see Figures 2 and 3, [52] is similar to the ultramafic-hosted hydrothermal sulfide fields of the Atlantic Ocean [53] and is characterized by high Cu and low Zn and Pb contents, higher Co contents, and generally low reserves, see Table 1. Three subtypes (U1, U2, U3) are identified as Uralian type based on the Cu/Zn ratio of ores, host rock composition and position in the bimodal mafic sequence, see Figure 3. The ore bodies located within or on the basalt basement of the bimodal mafic units represent subtype U1 (Yubileynoe deposit) and the deposits of subtype U2 (Yaman-Kasy) and U3 (Molodezhnoe) are underlain by both basalt and felsic lava flows [41,47,54]. The geochemical features of the Yubileynoe deposits are typical both of Cyprus (Cu/Zn>1) and Uralian (higher Te contents) types. The highest Te contents and low Cu/Zn ratio (<1) are characteristic of the deposits of subtypes U2 (Yaman-Kasy) and U3 (Molodezhnoe). In comparison with subtype U2, the U3 subtype ores have higher Pb contents, as shown in Table 1.  [19,45,51]).
Deposits of Baymak type formed in the upper sequences of oceanic rifted arcs [39]. These deposits (Valentorskoe, Aleksandrinskoe) are similar to subtype U3 and occur in the upper ore-bearing levels of the bimodal sequences within the andesitic dacite upper units. Relatively to the Uralian type, the Baymak-type deposits show lower S (<30 wt.%) and Te (<30 ppm) with higher Cu + Zn and Pb contents. The chimney sulfides of the Baymak-type deposits are characterized by low Co contents in comparison with those from the Uralian type deposits [49]. Baymak-type deposits include two subtypes: B1 (Cu > Zn, Valentorskoe) and B2 (Zn > Cu, Aleksandrinskoe), see Table 1. The deposits of Rudny Altay type (Saf'yanovskoe) are similar to the Baymak-type deposits in a geological setting; however, they are associated with black shales in contrast to jaspers in the case of Baymak-type deposits and may conform to the felsic-siliciclastic type described by Franklin et al. (2005) [50].
The Urals deposits described here have been interpreted as variably eroded sulfide mounds [12,[17][18][19]45,55,56], see Figure 4. Their cores are composed of pyrite-rich porous to massive sulfide [57] and lenses of colloform pyrite and marcasite are located in the upper parts of these cores. The cores are surrounded by variable amounts of breccia, successively passing out into sulfide turbidites, sulfide and barite diagenites, and ferruginous sediments [20,58] or, in the case of Saf'yanovskoe, black shales [22].
In general, the studied deposits can be ordered in terms of the increasing amount of felsic volcanic rocks with associated gradual changes in associated ore types: Dergamysh (A) → Yubileynoe (U1) → Yaman-Kasy (U2) → Molodezhnoe (U3) → Valentorskoe (B1) → Aleksandrinskoe (B2). In this progression, the footwall alteration gradually changes from talc-chlorite-carbonate to chlorite, quartz-chlorite-sericite and quartz-sericite rocks. In a similar order, sulfide textures change with a decrease in the occurrences of lattice isocubanite structure, colloform pyrite, pyrrhotite or pseudomorphic pyrite and marcasite after pyrrhotite in the same order. In contrast, the contents of sphalerite-, bornite-, galena-and barite-rich diagenites increases relative to pyrite-and chalcopyrite-rich diagenites (with the exception of Valentorskoe). The Saf'yanovskoe deposit [48,49] is an exception as it exhibits features of both the Urals and Baymak deposit types, lacking chalcopyrite-rich diagenites. This range of sulfide types is consistent with similar VHMS deposits found elsewhere [48,49,59]. In general, the most diverse mineral assemblages occur in seafloor smoker chimneys (hereafter, chimneys) and clasts of chimneys found in ore diagenites (see below). The chimneys are the most important attributes of the deposit types because they directly reflect the composition of host rocks and the distance from the basalt basement from where the metals venting through the chimneys are sourced [48,49]. In chimneys of the Atlantic-type Dergamysh deposits, mineral assemblages are of low diversity in comparison with other types of deposits. The chimneys of the Uralian-type deposits host abundant tellurides and rare galena, tennantite, tetrahedrite and native gold. The chimneys of the Baymak-type deposits contain lower amounts of telluride minerals and, conversely, more abundant galena and tennantite. The mineral assemblages of chimneys of the Saf'yanovskoe deposit are similar to those of Uralian and Baymak types of the deposits.
Even though deposits are part of the Uralian orogen, the host rocks of the deposits are mostly undeformed and have undergone low metamorphism restricted to zeolite or prehnite-pumpellyite facies [60,61]. Primary colloform and framboidal textures, sooty pyrite, sulfidized vent fauna and primary delicate microtextures of chimneys with a well-preserved lattice isocubanite structure and preserved chalcopyrite emulsion ("chalcopyrite decease") in sphalerite and pseudomorphs of sphalerite after würtzite indicate a very low degree of metamorphic overprint [19,45,48,49,55,[62][63][64][65], accounting for the exceptional degree of preservation of some deposits [36]. In some deposits, ferruginous sediments also record well-preserved primary features consistent with diagenetic and low metamorphic mineral evolution only, showing relict features of neotokite and nambulite [66]. Our interpretation is that the mineral assemblages were formed during primary hydrothermal and diagenetic stages including seafloor supergene alteration.

Sampling and Analytical Techniques
The ore diagenites were mapped in the open pits of the deposits. The hand specimens of ore diagenites were macroscopically studied at the Institute of Mineralogy, Urals Branch, Russian Academy of Sciences (IMin UB RAS, Miass). The mineralogy of ore diagenites was first studied using an Olympus BX-51 optical microscope at the IMin UB RAS. The chemical composition of minerals was analyzed on a REMMA-202M and Tescan Vega 3sbu SEMs equipped with an Oxford Link EDS and a JXA JEOL 733 (IMin UB RAS) and CAMECA SX-50 and JEOL-JXL-8600 (Natural History Museum, London) and JEOL JXA 8900RL (University of Tasmania, Australia, and Freiberg Mining Academy, Germany) microprobes. For microprobe analyses, the standard deviation of results was less than 0.1%. Major and minor elements were determined at an accelerating potential of 15-25 kV, beam current of 20-35 nA and acquisition time between 10 and 20 s for X-ray peak and background. The effective probe size was 1 to 2 μm. The following standards were used: SKα

Pyrrhotite-Rich Diagenites
An almost completely altered clastic sulfide layer (pyrrhotite-rich diagenite) mixed with serpentinite fragments was found in the northwest of the Dergamysh deposit, see Figure 5a [52]. This layer is composed of angular pseudomorphic pyrrhotite and chalcopyrite aggregates, which probably replaced pyrite clasts, see Figure 5b, and pyrite, see Figure 5c, and pyrrhotite-pyrite nodules, see Figure 5d. Chalcopyrite occurs mostly as anhedral aggregates in the matrix replacing pyrite and pyrrhotite and as veins in pyrrhotite-pyrite nodules.
Numerous lenticular and smoothed angular aggregates of crystalline pyrite from a few hundreds of microns to 3 mm are similar to nodules characterized by a central porous zone which is surrounded by intergrowths of crystalline pyrite. Some elongated pyrite crystals exhibit typical "pinnate" sector zoning after etching. In many cases, the nuclei of pyrite nodules are replaced by lamellar pyrrhotite crystals and non-opaque minerals with the outer part composed of radial intergrowths of pyrite crystals. Fine pyrite grains and chalcopyrite inclusions are observed in the central parts of the nodules. Fragmented pyrite crystals of the outer zone of the nodules are crossed by pyrrhotite veinlets only a few microns thick. Pyrrhotite also replaces pyrite crystals along the growth zones. The pyrrhotite aggregates contain numerous relict pyrite inclusions and newly formed vein-like, rounded, angular, and flame pentlandite inclusions, which are often associated with non-opaque minerals [53]. Mackinawitе (Fe7.28Co0.46Ni0.29)8.03S8 occurs as lamellae ~10 μm wide and up to 100 μm long in pseudomorphic chalcopyrite probably forming a ghost detrital structure, see Figure 5e. Nickeline (Ni1.02Co0.06)1.08As1 forms oval, rounded, and triangular grains 10-15 μm in size at the contacts of chalcopyrite and pyrrhotite, chalcopyrite and non-opaque minerals. Nickeline grains are often rimmed by gersdorffite (Ni0.55Co0.40Fe0.09)1.04As1.02S0.98, which is intimately intergrown with cobaltite (Co0.69Ni0.22Fe0.12)1.03As1.03S0.97. The latter rims nickeline and also forms anhedral aggregates and veins in chalcopyrite aggregates, see Figure 5f. Small inclusions of pilsenite (Bi4Te3) and native gold were found at the contact of cobaltite and chalcopyrite [53]. Numerous aggregates of sulfides are replaced by the latest newest quartz and magnetite is also a late phase. The primary clastic character of these diagenites is emphasized by the occurrence of numerous chromite clasts as compared with the pyrite-rich core of the main sulfide mound of the deposit [52].

Chalcopyrite-Rich Diagenites
Banded chalcopyrite-rich diagenites occur in all types of the deposits studied except for the Saf'yanovskoe deposit. Chalcopyrite-rich diagenites are more abundant in the Atlantic-type deposits as a result of the transformation of sulfide turbidites enriched in chalcopyrite-1-pyrite-sphalerite chimney clasts. The sulfide turbidites of the Dergamysh deposit contain striking chalcopyrite nodules developed around serpentinite cores, see Figure 6a.
The degree of the replacement increases to the upper part of the turbidite rhythms indicating progressive seafloor alteration (early diagenesis), see Figure 6b. The diagenites typically preserve relict clastic microtextures of pyrite. Authigenic chalcopyrite (chalcopyrite-2) replaces clasts of pyrite, see Figure 6c, and reniform sphalerite-1 forms after suspected würtzite, see Figure 6d. Strongly altered sulfide turbidites are mostly composed of chalcopyrite-2 and -3. Authigenic inclusions of native gold Ag0.54Au0.46 occur in the replacement fronts and in pyrite nodules. The cores of radial columnar marcasite nodules are replaced by chalcopyrite-2 as well, see Figure 6e. Chalcopyrite-3 hosts mackinawite inclusions. Carrolite is found in the zoned pyrite crystals replaced by chalcopyrite-2, see Figure 6f, and shows variable substitution of 2Co 2+ for (Cu + +Fe 3+ ), leading to a gradual isomorphic range of non-stochiometric minerals: Cu0. 76 Figure 6g. Interstitial latest-stage magnetite crystals occur in chalcopyrite-2,3 aggregates. In the Yubileynoe deposit, chalcopyrite-rich layers are intercalated with pyrite-rich diagenites containing partly preserved pyrite clasts [67]. The adjacent layers are characterized by different degrees of replacement, see Figure 7a. Chalcopyrite takes the form of a number of generations. Chalcopyrite-1 occurs in hydrothermal chimney clasts. Fine-grained chalcopyrite-2 replaces pyrite clasts, see Figure 7b. Some veinlets and pores are then filled by coarser-grained chalcopyrite-3, seemingly free of relict pyrite. Rare growth twins of chalcopyrite-3 are observed after etching. Pyrite nodules occur in some of the chalcopyrite-rich layers and their cores are replaced by chalcopyrite-3 and sphalerite-2,3, as shown in Figure 7c. Chalcopyrite-3 and sphalerite-3 locally contain inclusions of native gold, Au0.70Ag0.30, see Figure 7d. In some pyrite clasts, interstitial chalcopyrite-3 veinlets are hosts to abundant authigenic coloradoite, see Figure 7e, rare tellurobismuthite, altaite, rucklidgeite, stützite, and volynskite. It is suggested that the formation of authigenic tellurides and native gold occurred during seafloor dissolution (halmyrolysis) of colloform pyrite and fragments of crystalline chalcopyrite-1 and sphalerite-1, which are found to be enriched in Te only in fragments formed in black or gray smoker chimneys. No tellurides and native gold are observed in the latest coarse-grained chalcopyrite-4, which shows elongated deformed glide twins recognized after etching [67]. Chalcopyrite-4 most likely formed in quartz veinlets linked to weak deformation or metamorphism. In volcano-sedimentary units contemporaneous with sulfide venting at the Yubileynoe deposit, rounded and lens-shaped coarser crystalline chalcopyrite-3 nodules are disseminated through hyaloclastic shales intercalated with sulfide turbidites, see Figure 7f. The core of these nodules host inclusions of Se-bearing galena, hessite and sphalerite-3, see Figure 7g, and a phase of intermediate composition between tellurobismuthite and kawazulite Bi1.96Ag0.26Te2.75Se0.25 that is intergrown with hessite, galena and sphalerite-3, see Figure 7h. Native gold Au0.77Ag0.21Hg0.02 is associated with pyrite-3 and sphalerite-3 inside the chalcopyrite-3 nodule, see Figure 7i.

Bornite-Rich Diagenites
Bornite-rich diagenites are typical of massive sulfide bodies of the Uralian-and Baymak-type deposits. In the Atlantic-type Dergamysh, Uralian-type Yaman-Kasy and Rudny Altay-type Saf'yanovskoe deposits, bornite is found as isolated inclusions while in the Uralian-type Yubileynoe deposit, some bornite-rich bands and spots are observed in chalcopyrite chimney breccias.
In the Аleksandrinskoe deposit, some clastic sulfide layers are partly replaced by bornite. Stratified bornite layers occupy several (two to three) lithological-stratigraphical levels marking each halmyrolysis cycle [73]. In sulfide turbidites, bornite-rich layers occur in the upper part of every rhythm [19]. In these bornite-rich diagenites, pyrite clasts are replaced by bornite and later diagenite with the formation of galena and large grains of native gold Au0.90Ag0.10, see Figure 11g. Stromeyerite Ag0.99Cu0.99S1.02 is also a typical mineral of the bornite-rich submarine supergene zone [73]. Inclusions

Pyrite-Rich Diagenites
Pyrite-rich diagenites often occur far from the core of the deposit that represents the hydrothermal refining zone, and it is concluded that they are a product of seafloor supergene Cu-Zn leaching from sulfide turbidites. The corrosive microtextures of colloform pyrite, marcasite, chalcopyrite and sphalerite in some clastic sulfide layers accompanied by recrystallization of pyrite are evidence of these processes. Different degrees of recrystallization of colloform pyrite, marcasite and zonal subhedral pyrite to anzonal euhedral pyrite in the adjacent layers of sulfide turbidites are a signature of the diagenetic versus metamorphic or hydrothermal origin of these processes [19].
In the Dergamysh deposit, the pyrite-rich diagenites are intercalated with pyrite-sphalerite turbidites, see Figure 14a. The turbidites are composed of pyrite-2 clasts in assemblage with clasts of colloform crystalline pyrite. Rare zoned sphalerite-1 clasts are characterized by chalcopyrite emulsion and hexagonal forms typical of former würtzite. Relict sphalerite-1 can be found in authigenic pyrite-3. In many places, pyrite framboids and their nodular aggregates are enclosed in euhedral azoned pyrite-3, see Figure 14b. Numerous fine-grained nodules are abundant in pyrite-rich diagenites, see Figure 14c. Relict zoned pyrite-2 composes the cores of pyrite-3 aggregates, see Figure 14d.
In the Yubileynoe deposit, pyrite-rich diagenites are intercalated with hyaloclastic shales, see Figure 14e. Less altered pyrite turbidites contain relict zoned pyrite-2 in euhedral pyrite-3, see Figure 14f, and framboidal pyrite nodules, see Figure 14g. Ore clasts mixed with fine-grained hyaloclastic material are completely transformed to fine-grained pyrite nodules and later euhedral pyrite-3, see Figure 14h. Their core consists of abundant relict chlorite and illite, see Figure 14h, and rare pyrrhotite, chalcopyrite-3 and sphalerite-3 [67]. The coarse-grained pyrite-3 rim hosts inclusions of petzite, hessite and native gold, see Figure 14i. No pyrite-rich diagenites were found in sulfide turbidites of the Yaman-Kasy deposit. Signatures of pyrite-3, however, can be recognized in some sulfide turbidite layers containing clasts of colloform pyrite or pseudomorphic sooty pyrite. Colloform pyrite is overgrown by subhedral pyrite-3, see Figure 15a. Pseudomorphic pyrite after euhedral hydrothermal pyrrhotite is replaced by anhedral pyrite-3 or marcasite, see Figure 15b. These immature sequences at Yaman-Kasy, probably represent the initial stage of the formation of pyrite-rich diagenites. In the Molodezhnoe deposit, pyrite-rich diagenites are typically intercalated with barite-rich diagenites in the upper part of an apron of ore-clast material together with rare relict sphalerite-rich diagenites, see Figure 15c. The pyrite-rich diagenites are composed of fine-and coarse-grained pyrite and contain rare sphalerite inclusions. Fine-grained pyrite displays nodular microtextures and locally, the fine-grained cores are well-preserved in crystalline nodules, as shown in Figure  15d.
In the Saf'yanovskoe deposit, the pyrite-rich diagenites are completely altered to thin layers mixed with organic matter presumably derived from adjacent carbonaceous shales, see Figure 15f. Framboidal, nodular and euhedral pyrite is abundant in diagenites formed after fine-clastic sulfide turbidite, while coarse clasts are well-preserved in sulfide breccias and turbidites. Framboidal pyrite nodules are surrounded by crystalline pyrite, see Figure 15g, and the cores of the nodules are partly replaced by galena and tennantite, see Figure 15h. Native gold, enargite, luzonite, famatinite, and diagenetic bournonite [77] inclusions are typical of authigenic pyrite, see Figure 15i.

Barite-Rich Diagenites
Barite-rich diagenites are often associated with gossanites formed from seafloor oxidized sulfide bodies, which are characteristic of some VHMS deposits of the Urals (e.g. Molodezhnoe, Aleksandrinskoe), see Figure 16. In the Molodezhnoe deposit, barite-rich diagenites occur in the northern flank of the clastic ore lenses in association with sulfide turbidites and ferruginous gossanites [20]. In most cases, the barite-rich layers and lenses are intercalated with pyrite-rich diagenites, see Figure 16a. Some sulfide turbidites contain barite fragments indicating a seafloor origin of barite-rich diagenites, see In the Aleksandrinskoe deposit, the barite-rich diagenites occur at the flanks of the ore body and locally between clastic sulfide layers and ferruginous gossanites. Some multilayered ore bodies host hematite-rich barite breccias, see Figure 16e. The barite-rich diagenites are composed of subhedral barite crystals, see Figure 16f. Relict pyrite inclusions are replaced by chalcopyrite-3 with galena and Zn-rich tennantite (Сu10.10Ag0.23)10.33(Zn1.78Fe0.17)1.95(As2.75Sb1.23)3.98S13, see Figure 16g, and sphalerite. Acanthite and native gold have been previously found in barite-rich diagenites [73,78].

Hematite-Rich and Magnetite-Rich Diagenites (Halmyrolytes)
The hematite-rich and magnetite-rich diagenites (halmyrolytes, gossanites or iron oxide facies), which are formed due to the seafloor oxidation of sulfide Fe 2+ , are a striking product of complete halmyrolysis of the Urals sulfide bodies. These rocks are considered the counterparts of the present-day ochre-rich gossans around the black smoker complexes and clastic sulfides [12]. Most gossanites include jasper, chlorite-hematite, chlorite-magnetite and carbonate-rich hematite or magnetite types intercalated with clastic sulfides, hyaloclastites and calcareous layers formed at the flanks of the deposits. Halmyrolysis is typically ended by the formation of stable hydroxide phases, which can be transformed to hematite and magnetite during later diagenesis [20].
The Dergamysh deposit lacks hematite-rich diagenites. Hematite only rims some serpentinite clasts in sulfide turbidites. Magnetite-rich layers were found in the hanging wall of the deposit, where magnetite replaces the serpentinite clasts.
The Molodezhnoe deposit yields the best layers of hematite-rich gossanites up to 0.5-m thick, recognized as a zone of full submarine oxidation to form a seafloor gossan [12,20]. Gossanites are intercalated with sulfide turbidites and chlorite shales, see Figure 18a, and exhibit numerous, well-preserved relict microtextures of primary clastic sulfides including pseudomorphic hematite after colloform pyrite clasts, see Figure 18b, zoned pyrite-2 and nodules of framboidal pyrite, see  Typically, the Baymak-type deposits lack Fe-rich gossanites except for the Aleksandrinskoe deposit, where Fe-rich hematite-chlorite-carbonate gossanites are intercalated with barite, sulfides and calcareous hyaloclastic shales [20]. The gossanites often cover the barite layers, see Figure 19a, and consist of calcite, chlorite, hematite and quartz with rare apatite and monazite. An abundance pseudomorphic hematite after ore clasts, in particular, after colloform pyrite and framboidal pyrite nodules, occurs in the hematite-barite-rich matrix, see Figure 19b,c. The formation of pseudomorphic hematite is a result of the sequential seafloor mineral alteration allowing iron hydroxides to replace the sulfides and then to be gradually altered to hematite in the course of lithification [80]. Native gold is associated with chalcopyrite inclusions, see Figure 19d. Instead of native gold and relict sulfides, the gossanites contain microinclusions of tetradymite, tsumoite, rucklidgeite, hessite and altaite in pseudomorphic hematite after pyrite, chalcopyrite and sphalerite clasts. Tetradymite Bi2Te2S occurs as isometric inclusions up to 10 μm in size, see Figure 19g, and contains 0.53-0.66 wt.% Se and 0.3-1.07 wt.% Ag. Tsumoite (up to 7.79 wt.% Pb), as well as altaite and hessite, forms intergrowths with tetradymite and inclusions of up to 5 μm in pseudomorphic hematite in the chlorite-hematite matrix.

Arguments for Diagenetic Origin of Banded Sulfides and Barite
The ore breccias and sandstones are often intercalated with thin banded sulfide layers at the flanks of clastic ore bodies. Banded sulfides could frequently be recognized as intercalated altered clastic sulfide layers on the basis of the load casts, which are typical of sulfide turbidites but are not characteristic of fallout settled sulfide particles [17,19,81], even in metamorphosed VHMS deposits [82]. The seafloor replacement origin is confirmed by the presence of synchronous clasts of fast-lithified barite and sulfide layers in slumping sulfide and barite breccias [18].
The alteration of clastic sulfide layers may be related either to the hydrothermal replacement or halmyrolysis and diagenesis. In the Kidd-Creek deposit, Cu enrichment is considered to be the main process of hydrothermal replacement of massive banded sulfides [83], and the origin of the Saf'yanovskoe deposit is considered to be similar, see Figure 4. The hydrothermal replacement of clastic sulfides is observed as cross-cutting zones in the cores of some sulfide mounds with the local formation of massive and veined textures. Hydrothermal mineral assemblages are largely controlled by fluid composition and physicochemical conditions and are not influenced by the primary composition or lithology of sulfide layers. In general, the pervasive hydrothermal replacement cannot be a simple explanation for the selective alteration of neighboring sulfide layers, which are altered in varying degrees and are commonly alternating with very well-preserved black shales, jaspers, calcareous claystones or hyaloclastic sandstones, likely formed far from the feeder zone. Sedimentary rocks intercalated with diagenetically altered sulfide turbidites are typically well-preserved. In contrast to the halmyrolysis and diagenesis of the layers, the hydrothermal alteration of sulfide turbidites would be expressed as a replacement by hydrothermal sulfides [84]. In ore diagenites, every layer exhibits a different degree of alteration that contrasts to the appearance of metamorphosed and/or hydrothermally altered sulfide turbidites [22]. Thus, the "diagenetic" hypothesis versus "hydrothermal replacement" is argued by the lack of hydrothermal alteration of adjacent background sediments.
Seafloor alteration and recrystallization of sulfide turbidites at the present-day black smoker vent sites provide important evidence for the diagenetic model. Replacement of pyrite clasts by authigenic chalcopyrite is typical for textures seen in modern clastic sulfides of the Atlantic Ocean [19,21,22]. In basaltic hyaloclastites, the pyrite clasts are replaced by authigenic chalcopyrite, while the chalcopyrite chimney clasts are replaced by bornite and euhedral pyrite aggregates. Euhedral pyrite crystals with porous cores are common for the lithified turbidites of the Menez Gwen hydrothermal field [24]. Pyrite nodules and authigentic chalcopyrite and bornite are identified in sulfide breccias of the Semenov-3 hydrothermal field [25]. Most clastic sulfides of the present-day and ancient VHMS deposits underwent a variable degree of alteration. Precipitation of pyrite around ore clasts in present-day ore clastic sediments indicates an on-going mineral formation after sedimentation [85]. For example, sphalerite, which is a product of würtzite inversion in chimneys clasts, was dissolved and reprecipitated at a lower temperature. In the Middle Valley area of the Juan-de-Fuca Ridge, the individual clasts are composed of an open network of pyrrhotite, sphalerite, and isocubanite partly filled and replaced by pyrite, barite and Fe oxides [86].
Diagenetic alteration is a preferred explanation for the correlation between the thickness of layers and their mineralogical features. The increase in the alteration intensity with a decreasing size of ore clasts (layer thickness) suggests that the bulk of these processes occurred in soft sulfide sediments. Granulometry is responsible for the perceived different degree of alteration because the fine-clastic sulfide turbidites are always more altered in comparison to sulfide breccias [22].
Seafloor conditions for the diagenetic alteration of sulfide turbidites are also supported by the stratified character both of Cu and Zn enrichment or leaching. The seafloor or early diagenetic nature of alteration is evident from the asymmetric mineral zoning of sulfide rhythms when the tops of the sulfide layers are enriched in authigenic chalcopyrite, bornite, sphalerite, and hematite [22,87,88]. The cyclic recurrence of asymmetric sulfide rhythms is explained by the variable oxidation state of the basin [87]. However, the hydrothermal-sedimentary hypothesis ignores the lateral zoning of sulfide layers and replacement of sulfides. Relict sulfides, barite and rocks are preserved in the foot of some thick layers of sulfide turbidites and sulfide breccias [19,22,89].
The low-temperature conditions for the formation of mineralization provide key genetic evidence for the seafloor alteration model. Stromeyerite, the formation of which is limited by an upper temperature of 67 C [90,91], was found in close assemblage with chalcocite, digenite, galena and covellite in bornite-rich diagenites. Similar high Se/S ratios of the hydrothermal minerals of chimney clasts and authigenic mineral counterparts could be evidence of the high temperature of formation of mineralization in both cases [81]. The higher Se content of sulfides is used as evidence of the high temperature of formation of hydrothermal ore or black smoker chimneys (Se is highly soluble in fluids at temperatures of 350 °C) [92][93][94][95][96]. In contrast, Se-poor chalcopyrite was found to precipitate at medium to low temperatures [97]. In pseudomorphic authigenic sulfides, however, the high Se contents reflect inclusions of selenides [98] or are inherited from primary ore chimney clasts with variable Se contents. Different Se contents of primary sulfides from different types of VHMS deposits also depend on the composition of host rocks [49]. Even a low Se content in solutions is sufficient for the precipitation of selenides and their stability area is expanded with decreasing temperature [99].
The replacement of pyrite by pyrrhotite is typically considered a metamorphic process [100,101]. In the Urals VHMS deposits, abundant pseudomorphic pyrrhotite is often considered the high-temperature mineral in the refining zone of VHMS deposits [102]. At the same time, its high-temperature hexagonal and low-temperature monoclinic types are combined in the feeder zones of the deposits. Pseudomophic pyrrhotite occurs in sulfide turbidites of metamorphosed (Mauk deposit [82]) and non-metamorphosed (Ishkinino, Dergamysh deposits [53]) deposits of the Urals, as well. All these turbidites contain serpentinite clasts. The thermodynamic modeling shows that the low-temperature formation of iron monosulfides requires only excesses of Fe 2+ (e.g., the presence of olivine) in sulfide sediments [64]. In the Dergamysh deposits, the ore diagenites composed by nodular monocline pyrrhotite could be considered to be the low-temperature proxies, similarly to diagenetic pyrrhotite nodules of non-metamorphosed sedimentary iron deposits [103].

Mineralogical Diversity of Ore Diagenites
The mineralogical diversity of ore diagenites can be explained by different primary compositions of hydrothermal ore clasts and following processes of seafloor alteration. Every type of VHMS deposit is characterized by a specific mineralogical group of ore diagenites. In a range from ultramafic-and mafic-to bimodal mafic-and felsic-related VHMS deposits, the amount of sphalerite-, bornite-, galena-and barite-rich diagenites increases compared to pyrite-and chalcopyrite-rich types. This is consistent with general changes in the composition of hydrothermal ore facies and their clasts. The ultramafic-and mafic-related VHMS deposits are dominated by pyrite-chalcopyrite and colloform pyrite-marcasite crusts and pyrite-rich vent material with minor sphalerite. Barite-chalcopyrite and barite-sphalerite chimneys with minor crystalline pyrite are typical of bimodal felsic-and felsic-related VHMS deposits. The bimodal mafic-related VHMS deposits show all the mineral varieties of hydrothermal ore facies and their clasts [20].
Authigenic galena and selenide-bearing assemblages of seafloor altered ore diagenites are also typical of rare mineral assemblages in the superimposed terrestrial supergene weathering zones of Urals VHMS deposits [98,114]. Ore diagenites are dominated by a small group of Cu-rich minerals: Chalcocite, bornite, covellite, digenite and enargite. In the supergene blanket, these sulfides are intergrown with relict hydrothermal sulfides (pyrite, chalcopyrite, sphalerite). Similar secondary sulfide minerals are formed as a result of seafloor oxidation of seafloor hydrothermal sulfides [104].

Microtextures and Mineral Evolution
The general evolution of clastic sulfide sediments leading to the formation of ore diagenites is shown in Figure 20. Some microtextures (colloform, sooty pyrite, lattice "isocubanite", chalcopyrite emulsion in sphalerite-würtzite, coarse oscillatory zonation in pyrite and würtzite-sphalerite, acicular structure of chalcopyrite) are characteristic of primary ore clasts, only. These microtextures are destroyed in ore diagenites during early diagenesis giving way to abundant corrosion and replacement microtextures at the early diagenetic stage. Halmyrolysis results in the dissolution of primary sulfide clasts and the further formation of authigenic sulfides, barite and iron hydroxides. Primary rare mineral assemblages dissolve during halmyrolysis of fine-clastic sulfide turbidites. Early diagenetic sulfides are fine-grained and host well-preserved relicts of primary sulfides as do fine-grained nodules.
In contrast to destructive early diagenesis, late diagenesis has resulted in the dramatic formation of crystalline authigenic sulfides. Coarsely crystalline authigenic sulfides are devoid of relict primary sulfides. Pyrite is replaced by chalcopyrite or sphalerite and bornite, while pores have become filled with subhedral crystals of sulfides. During late diagenesis, fine-grained nodules are overgrown by subhedral crystals. Euhedral sulfide crystals and most of the rare authigenic minerals are formed at the same time. Interstitial veinlets occur in the fractures both between and within sulfide crystals, resulting from breakdown processes. Some veinlets with sulfides and rare authigenic minerals occur in sulfide nodules, as well as in the diagenite layers, and the veinlets are probably most typical of the end of late diagenesis to post-diagenetic processes. In weakly metamorphosed Urals VHMS deposits, different sulfide layers exhibit different degrees of alteration. In spite of the common features and generalized mineral succession seen in ore diagenites, these are quite distinct in different ore sulfide turbidites, which include (1) Fe-rich and (2) Fe-poor types and (3) turbidites mixed with background ultramafic, hyaloclastic, carbonaceous and calcareous sediments.
The Fe-rich sulfide turbidites are subdivided into (1) pyrite (after pyrrhotite) type with minor sphalerite and (2) chalcopyrite-pyrite type with minor sphalerite. Type 1 has clasts of hydrothermal diffuser structures and hydrothermal crusts while type 2 has clasts of black smoker chimneys and are typical for ultramafic-, mafic-, and bimodal mafic-types of VHMS deposits.
In type 1, pyrrhotite clasts become replaced by authigenic sooty and crystalline pyrite and marcasite. Sooty pyrite is crystallized prior to nodular and euhedral pyrite varieties. Minor sphalerite is absent, presumably, removed from Fe-rich layers with the formation of pyrite-rich diagenites. Oxidation of abundant colloform pyrite leads to low pH conditions of diagenesis [26]. Under acidic conditions, sphalerite dissolves faster than pyrite [26,115,116]. Hamyrolysis of sulfides is quite distinct from the hydrothermal processes in the absence of hydrothermal H2S, whereas leached ZnS could produce reduced S (S 0 , S 2− ) necessary for the formation of authigenic pyrite [19]. This type of pyrite-rich diagenite is poor in tellurides, as well as evidence of primary diffuser clasts [67].
The evolution of type 2 of Fe-rich sulfide turbidites is more complex. Pyrrhotite-1 clasts are replaced by sooty pseudomorphic pyrite and marcasite and then, by crystalline pyrite-3 as well. The fine-clastic sphalerite-1 and chalcopyrite-1, as well as pyrite-1, dissolve during early diagenesis. Colloform and dendritic pyrite are transformed to subhedral and then euhedral crystals and nodules. The dissolution of primary iron disulfides results in a dramatic decrease in the pH [87]. The dissolution rates of sulfides and sulfates were probably very different. The present-day ocean exhibits the following range of dissolution rate of the 2-μm particles (days): Anhydrite (0.5) → pyrrhotite (11) → marcasite (23) → sphalerite (48) → barite (58) → pyrite (106-218) → chalcopyrite (964) [117]. Halmyrolysis of sulfides triggered the replacement of primary pyrite clasts by fine-grained chalcopyrite-2 and, more rarely, by sphalerite-2. At low pH, chalcopyrite-2 is likely to be more stable than sphalerite-2. Chalcopyrite-2 pseudomorphs pyrite clasts typical of the earlier stage of diagenesis [22].
In most cases, sphalerite-2 is recrystallized to twinned sphalerite-3 or is replaced by chalcopyrite-3. During late diagenesis, coarse-grained chalcopyrite-3 forms associated with sphalerite-3, galena and tennantite coupled with authigenic tellurides, selenides, sulfides, galena, sulfosalts and native gold. This assemblage forms veinlets and inclusions in fractured pyrite crystals and pyrite and chalcopyrite nodules [67] leading to the formation of chalcopyrite-rich diagenites. Rare sphalerite-rich diagenites occur in thin layers intercalated with thick layers of chalcopyrite-and pyrite-rich diagenites. It is suggested that the decreasing pH, likely to occur during the late diagenesis of these layers, was buffered by abundant higher pH seawater and/or mixing with background pelitic sedimentary material [19]. Pseudomorphic magnetite and hematite are late diagenetic minerals replaced by pseudomorphic iron hydroxides. The chalcopyrite-rich diagenites are recrystallized to chalcopyrite-4 with a glide twin structure. This chalcopyrite-4 is associated with metagenetic quartz and chlorite and occurs in cleavage fractures and is usually not accompanied by rare authigenic minerals [67].
Accessory minerals evolve in parallel with major sulfides, see Figure 21. Any Co and Fe sulfarsenides and Fe, Co, Bi, Au, Ag, Hg and Pb tellurides occurring in chimney clasts are replaced by appropriate sulfosalts, galena, Co, Cu and Ag sulfides, native tellurium and native gold during the earlier stage of sulfide oxidation. This process is complemented by the formation of secondary tellurides and sulfarsenides during later diagenesis under favorable reducing conditions. Subordinate tellurides and sulfotellurides were found in strongly altered sulfide layers and sulfide nodules. Thus, primary tellurides and arsenides dissolve during halmyrolysis of ore clasts. However, most authigenic counterparts are formed during late diagenesis. Authigenic tellurides and arsenides occur in sulfide veinlets or at the front of diagenetic replacement, while primary hydrothermal varieties are precipitated synchronously with hydrothermal sulfide crystals [66]. Rare mineral assemblages are more diverse in ore diagenites in comparison with material from chimneys and other hydrothermal seafloor mineralization. In addition to tellurides and arsenides, mature chalcopyrite-rich diagenites contain abundant selenides, the Te and Se derived from black and grey smoker chimney clasts [49]. In weakly metamorphosed VHMS deposits, tellurides are the products of primary syngenetic hydrothermal growth of chimneys (Stage 1) and by the replacement of primary hydrothermal sulfide clasts by diagenetic chalcopyrite or iron hydroxides in ore diagenites (Stage 2). Tellurides are also found in many metamorphosed deposits of the Urals and it is suggested that tellurides may also be formed during hydrothermal overprinting or later metamorphic hydrothermal events [82,108,118,119]. The important role of metamorphic-hydrothermal processes is proved for tellurides of Carlin-type and orogenic gold deposits [100], and this process can be proposed for later metamorphic hydrothermal veins of VHMS deposits. However, in VHMS deposits, the main feature of metamorphism versus diagenesis is the formation of aluminosilicate minerals [9]. In ore diagenites of weakly metamorphosed Molodezhnoe, see Figure 9i, and Yaman-Kasy, see Figure 8e, deposits, authigenic chalcopyrite and tellurides are partly replaced by chlorite. It is suggested that tellurides, as well as sulfides, could be replaced by aluminosilicates during early metamorphism of ore diagenites. In strongly metamorphosed deposits, diagenetic tellurides may be redeposited in epigenetic veins during collision processes or the regressive stage of metamorphism (Stage 3). These tellurides-3 are absent in the non-metamorphosed deposits studied herein. In contrast to tellurides-3, no metamorphic selenides could be found because Se 2− then substitutes for S 2− in high-temperature metamorphic chalcopyrite [92].
The Fe-poor sulfide turbidites occur in some Uralian and mostly in Baymak types of the deposits. The mineral succession of these turbidites is distinct from that of Fe-rich varieties. The Fe-poor breccias and turbidites host abundant clasts of barite and sphalerite of white smokers and clear diffusers. Breccias with abundant chalcopyrite gray smoker clasts can locally be found. Colloform pyrite, marcasite and pyrrhotite are rarely found in these deposits [49]. The variable conditions of seafloor alteration depend on the primary proportions between pyrite, chalcopyrite and sphalerite, which is responsible for controlling pH. Dissolution of sphalerite could be favorable for subalkaline conditions, which are unfavorable for pyrite and chalcopyrite preservation. The presence of dominant primary sphalerite consequently results in leaching of pyrite and enrichment in sphalerite, supported by physicochemical modeling [120]. The presence of ubiquitous sphalerite in seafloor gossans suggests that sphalerite or at least its Fe-poor variety may be locally resistant to oxidation under more alkaline conditions [26].
During early diagenesis, the dissolved fine-clastic sulfides could be sources for reduced S leading to the formation of authigenic sulfides during late diagenesis. In this succession, pyrite and chalcopyrite are replaced by tennantite, bornite and sphalerite-2,3. The sphalerite-rich diagenites can be intercalated with chalcopyrite-rich varieties. The chalcopyrite-rich diagenites are the products of the seafloor alteration of ore turbidites composed of fragments of chalcopyrite-rich grey smokers rather than simple replacement of pyrite clasts. The nodular pyrite-rich diagenites are associated with barite-rich varieties and this is related to the alteration of clastic sulfides containing abundant pyrite-barite white smoker clasts. The pyrite-rich diagenites contain nodules and euhedral pyrite crystals as a result of diagenesis of thick layers with the restricted influence of more alkaline seawater.
The bornite-, sphalerite-and barite-rich diagenites are abundant in these types of VHMS deposits. The Cu and Ag sulfides of the chalcocite and acanthite groups and the minerals of the germanite and enargite groups are abundant at the replacement front of chalcopyrite and sphalerite by bornite. They are derived from dissolved clasts of hydrothermal sulfides. Tellurides are rare except for hessite and cervelleite; the Te-and Bi-bearing tennantite, Ag-bearing tetrahedrite and Cu-Pb sulfosalts are associated with galena and barite. In mature diagenites, the higher amount of SO4 2− -, As 3+ -, As 5+ -, Ge 4+ -, Te 4+ -, Sb 3+ -, Sb 5+ -and V 5+ -bearing minerals is a testament to the increasing fluid oxidation state due to the influence of oxygenated seawater. Vanadium itself is considered a main indicator of seawater influence on oxidized sulfides [94]. Hematite and magnetite are the final proxies to these conditions. Native gold grains are larger in comparison to hydrothermal native gold grains (up to 1 cm in bornite-rich diagenites). In general succession, the sizes and grades of galena, barite, native gold and sulfosalts aggregates increased in this succession. Seawater is unfavorable for the dissolution of galena and migration of Pb [26], thus galena is always formed in ore diagenites and galena-rich diagenites are typically intercalated with sphalerite-rich varieties.
Some VHMS deposits (Aleksandrinskoe, Saf'yanovskoe) host huge amounts of barite-rich diagenites. The hematite-barite diagenites are formed as a result of the oxidation of massive sulfide ores during their interaction with seawater. Barite easily dissolves in seawater [117]; however, it can be contemporaneously precipitated due to an excess of SO4 2in seawater. This excess may be provided by seafloor oxidation of sulfides. Coeval dissolution and precipitation of barite in seawater resulted in its recrystallization and formation of banded barite diagenites after barite-sulfide sandstones. It is suggested that these diagenites are formed due to seafloor oxidation of sulfide sulfur with the exchange of SO4 2− with seawater. The S isotopic composition of barite is slightly enriched in S 32 isotope in comparison with Silurian and Devonian seawater [17].
The trends of mineral evolution also depend on the composition of background sedimentary material mixed with sulfide turbidites, which changes acid-base and redox conditions of pore fluids. The presence of ultramafic clasts (Fe-rich olivine or pyroxene) increases the stability of pyrrhotite clasts and the formation of low-temperature iron monosulfides (pyrrhotite) [17,64]. Clastic sulfides mixed with hyaloclastic material during diagenesis become enriched in authigenic sphalerite or chalcopyrite with nodular varieties [18,67]. Organic matter is important for the formation of authigenic framboidal, nodular and euhedral pyrite in black shale-associated VHMS deposits of the Rudny Altay type [23,89]. Calcareous material along with hyaloclastic and sulfide clasts is responsible for the fixation of Fe 3+ hydroxides during gossan formation on the seafloor [20]. Silicates and carbonates consuming hydrogen ions provide acid buffering reactions favorable for Fe 3+ hydroxide precipitation [26].

Conclusions
In weakly metamorphosed massive sulfide deposits of the Urals, banded sulfides are recognized as products of seafloor alteration of fine-clastic sulfide sediments to form ore diagenites. The ore diagenites include pyrrhotite-, chalcopyrite-, bornite-, sphalerite-, barite-and hematite-rich types. The amount of sphalerite-, bornite-and barite-rich diagenites increases in a progressive range from ultramafic-to bimodal mafic-and bimodal felsic-related deposits.