Next Article in Journal
A Note on States and Traces from Biorthogonal Sets
Previous Article in Journal
Selective Maintenance Optimization for a Multi-State System Considering Human Reliability
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Some Single-Valued Neutrosophic Power Heronian Aggregation Operators and Their Application to Multiple-Attribute Group Decision-Making

1
School of Management, Hefei University of Technology, Hefei 230009, China
2
Ministry of Education Engineering Research Center for Intelligent Decision-making and Information Systems Technologies, Hefei 230009, China
3
School of economics and management, Shanghai University of Electric Power, Shanghai 200090, China
*
Author to whom correspondence should be addressed.
Symmetry 2019, 11(5), 653; https://doi.org/10.3390/sym11050653
Submission received: 18 March 2019 / Revised: 30 April 2019 / Accepted: 5 May 2019 / Published: 10 May 2019

Abstract

:
The power Heronian aggregation (PHA) operator can use the advantages of power average and the Heronian mean operator, which together could take into account the interrelationship of the aggregated arguments, and therefore alleviate the effects caused by unreasonable data through considering the support degree between input arguments. However, PHA operators cannot be used to process single-valued neutrosophic numbers (SVNNs), which is significant for extending it to SVNNs. We propose some new PHA operators for SVNNs and introduce a novel MAGDM method on the basis of the proposed operators. Firstly, the definition, properties, comparison method, and operational rules of SVNNs are introduced briefly. Then, some PHA operators are proposed, such as the single-valued neutrosophic power Heronian aggregation (SVNPHA) operator, the single-valued neutrosophic weighted power Heronian aggregation (SVNWPHA) operator, single-valued neutrosophic geometric power Heronian aggregation (SVNGPHA) operator, single-valued neutrosophic weighted geometric power Heronian aggregation (SVNWGPHA) operator. Furthermore, we discuss some properties of these new aggregation operators and several special cases. Moreover, the method to solve the MAGDM problems with SVNNs is proposed, based on the SVNWPHA and SVNWGPHA operators. Lastly, we verified the application and effectiveness of the proposed method by using an example for the MAGDM problem.

1. Introduction

In real decision-making, multiple-attribute group decision-making (MAGDM) methods are extensively used to rank alternatives for relevant attributes. The decision information involved in MAGDM problems is often fuzzy and easily expressed by fuzzy information owing to the limitations of human thinking and the complexity of decision-making problems. Accordingly, Zadeh [1] first proposed fuzzy sets (FSs) to handle fuzzy information. Then, Atanassov [2,3] proposed the intuitionistic fuzzy sets (IFSs) based on FS owing to fuzziness. IFSs can embody the degrees of satisfaction and dissatisfaction to express the judgment of alternative. IFS has immediately gained widespread attention and been extensively studied in the field of MAGDM [4,5,6,7,8].
Although the IFS theory has been generalized, it still cannot solve all uncertain problems in real decision-making, such as those that involve indeterminate and inconsistent information. Therefore, to overcome these shortcomings, neutrosophic sets (NSs) was introduced by Smarandache [9], which can substantially express indeterminate or inconsistent information. The NSs is finer and smoother in describing fuzzy information than FS and IFS. However, the application of NSs is very difficult in practice due to the lack of specific description. Therefore, Wang et al. [10] defined single-valued neutrosophic sets (SVNSs), which is an instance of NSs. Meanwhile, SVNSs have attracted increasing attention from researchers, obtained numerous research achievements [11,12,13,14,15] and been extensively applied in many areas. The concept of distance of the two SVNSs and several similarity measures between SVNSs are defined and proposed by Majumdar and Samanta [16]. Ye [15] introduced the correlation coefficients and decision-making method of SVNSs. Şahin and Küçük [17] introduced a method to deal with SVNSs based on the neutrosophic subsethood measure. Based on the use of Hamming distance, Stanujkić [18] proposed a extend WASPAS method with single-valued intuitionistic fuzzy numbers, and application it in website evaluation. Liu, et al. [19] presented a single valued neutrosophic number Decision-making Trial and Evaluation Laboratory Method (SVNN-DEMATEL) model for evaluating and selecting a transport service provider. Pamučar et al. [20] proposed a Linguistic Neutrosophic Numbers Pairwise-CODAS model, which can eliminate subjective qualitative assessments and assumptions by decision makers in complex decision-making conditions. Pamučar et al. [21] presented a new Linguistic Neutrosophic Numbers Weighted Aggregated Sum Product Assessment (LNN WASPAS) model and further developed LNN CODAS (Combinative Distance-Based Assessment), LNN VIKOR (Multi-criteria Optimization and Compromise Solution) and LNN MABAC (Multi-Attributive Border Approximation Area Comparison) models.
Information aggregation generally became an important topic of MAGDM and received increasing attention from researchers [22,23,24]. A few new extended aggregation operators for NS and SVNS have been proposed previously [25,26,27,28]. Ji, et al. [29] proposed several Frank prioritized Bonferroni mean operators for SVNSs. Ren and Sugumaran [30] proposed some prioritized weighted geometric operators for SVNSs. Ye [31] extended several weighted arithmetic average operators for SNSs. Liu and Wang [32] extended a weighted Bonferroni mean operator for SVNSs. Li, et al. [33] extended Heronian mean (HM) operator for SVNSs. Yang and Li [34] extended the PA operator to SVNSs and developed some single-valued neutrosophic power weighted average (SVNPWA) operators. Wei and Zhang [35] proposed some Bonferroni power aggregation operators for SVNSs.
It is obvious that there are different functions for the different aggregation operators. Yager [36] firstly proposed power average (PA) operator, which can alleviate the effects caused by the unreasonable data through considering the support degree between input data. Xu [37] further defined a power geometric (PG) operator. Beliakov [38] first proposed Heronian mean operator, which can capture the interrelation of the input arguments. As an important generalization of Bonferroni mean, Yu [39] proposed the geometric Heronian mean. To consider the advantages of PA and HM operators together, P. Liu proposed some power Heronian aggregation (PHA) operators through combining the PA operator and HM operator to IVIFNs [40] and Linguistic Neutrosophic Sets (LNSs) [41].
The decision-making problems have increased in complexity, and in order to derive the best alternative for MAGDM problems, we need to consider both the influence of some unreasonable attribute values caused by the preference of decision maker, and the interrelationship and interaction among the attributes. Taking the advantages of the HM and PA operator, the PHA operator can achieve the following two functions: the interrelationship of the aggregated arguments could be taken into account, and the influence of unreasonable data could be eliminated by considering the support degree between input arguments. Besides, up to now, there has been no research on how to use PHA operator to aggregate the SVNNs. So, the goal and motivation of this study is to:
(1)
Establish the single-valued neutrosophic PHA (SVNPHA) operator, single-valued neutrosophic geometric PHA (SVNGPHA) operators and the weighted form of these operators (the form of shorthand is SVNWPHA and SVNWGPHA).
(2)
Discuss their properties and analyze special cases.
(3)
Propose a novel MAGDM method based on the SVNWPHA and SVNWGPHA operators for SVNNs.
(4)
Demonstrate the application and effectiveness of the developed methods.
The remainder of this paper is organized as follows. In Section 2, some definitions of SVNSs and some operational rules of SVNNs are introduced. In Section 3, we propose some new PHA operators, such as SVNPHA, SVNWPHA, SVNGPHA and SVNWGPHA operators. In Section 4, a MAGDM method is proposed based on the above operators in SVNNs environment. In Section 5, we demonstrate the application and effectiveness of the proposed method by using an example for the MAGDM problem. Section 6 presents the conclusion.

2. Preliminaries

2.1. The SVNNs

Definition 1.
[42]. Let X be a space of points with a generic element in X denoted by x. SVNS A in X is as follows:
A = { x ( T A ( x ) , I A ( x ) , F A ( x ) ) | x X }
where T A ( x ) is the truth-membership function, I A ( x ) is the indeterminacy-membership function, and F A ( x ) is the falsity-membership function. For each point x in X , we have T A ( x ) , I A ( x ) , F A ( x ) [ 0 , 1 ] , and 0 T A ( x ) , I A ( x ) , F A ( x ) 3 .
For convenience, we can use x = ( T A , I A , F A ) to represent an element in SVNS and call it an SVNN.

2.2. Operational Rules and Properties of SVNNs

Definition 2.
[32]. Let x i = ( T i , I i , F i ) and x j = ( T j , I j , F j ) be any two SVNNs and λ > 0 , the operations are defined as follows:
x i x j = ( T i + T j T i T j , I i I j , F i F j )
x i x j = ( T i T j , I i + I j I i I j , F i + F j F i F j )
λ x i = ( 1 ( 1 T i ) λ , I i λ , F i λ )
x i λ = ( T i λ , 1 ( 1 I i ) λ 1 ( 1 F i ) λ )
Theorem 1.
For any two SVNNs x i = ( T i , I i , F i ) and x j = ( T j , I j , F j ) , and η , η 1 , η 2 > 0, their operational rules have the following properties:
x i x j = x j x i
x i x j = x j x i
η ( x i x j ) = η x j η x i
η 1 x i η 2 x i = ( η 1 η 2 ) x i
x i η x j η = ( x i x j ) η
x i η 1 x i η 2 = x i ( η 1 η 2 )

2.3. Comparison of SVNNs

Definition 3.
[43]. Let x = ( T i , I i , F i ) be an SVNN. The score s ( x ) , accuracy a ( x ) , and certainty c ( x ) functions of x can be defined as follows:
s ( x ) = ( T i + 2 I i F i ) / 3
a ( x ) = T i F i
c ( x ) = T i
Definition 4.
[43]. Suppose x i = ( T i , I i , F i ) and x j = ( T j , I j , F j ) be two SVNNs. The comparison method between x i and x j can be defined as follows:
(1) If s ( x i ) > s ( x j ) , then x i x j ;
(2) If s ( x i ) = s ( x j ) and a ( x i ) > a ( x j ) , then x i x j ;
(3) If s ( x i ) = s ( x j ) , a ( x i ) = a ( x j ) , and c ( x i ) > c ( x j ) , then x i x j ;
(4) If s ( x i ) = s ( x j ) , a ( x i ) = a ( x j ) and c ( x i ) = c ( x j ) , then x i x j .
Definition 5.
[44,45]. Let x i = ( T i , I i , F i ) and x j = ( T j , I j , F j ) be any two SVNNs, the normalized Euclidian distance between x i and x j are defined as follows:
d ( x i , x j ) = [ ( T i T j ) 2 + ( I i I j ) 2 + ( F i F j ) 2 ] / 3

3. Some Power Heronian Aggregation Operators with SVNNs

3.1. Single Valued Neutrosophic Power Heronian Aggregation Operators

As an important aggregation operator, the PA operator is first proposed byYager [36], which can overcome the influence of unreasonable arguments by considering the support degree between input arguments. The traditional PA operator is defined as below.
Definition 6.
[36]. Let p , q 0 , and ϕ i ( i = 1 , 2 , , n ) be a group of nonnegative numbers. If
P A ( ϕ 1 , ϕ 2 , , ϕ n ) = i = 1 n ( ( 1 + T ( ϕ i ) ) ϕ i i = 1 n ( ( 1 + T ( ϕ i ) )
where T ( ϕ i ) = j = 1 , j i n S u p ( ϕ i , ϕ j ) . We denote S u p ( ϕ i , ϕ j ) as the support degree for ϕ i from ϕ j . S u p ( ϕ i , ϕ j ) satisfies the following axioms:
(1) S u p ( ϕ i , ϕ j ) = S u p ( ϕ j , ϕ i ) ;
(2) S u p ( ϕ i , ϕ j ) [ 0 , 1 ] ;
(3) S u p ( ϕ i , ϕ j ) > S u p ( ϕ l , ϕ k ) , if | ϕ i ϕ j | < | ϕ l ϕ k | .
Then PA is called the power average (PA) operator.
For example, suppose ϕ 1 = 0.6 , ϕ 2 = 0.7 , ϕ 3 = 0.8 are nonnegative numbers, the P A ( ϕ 1 , ϕ 2 , ϕ 3 ) are calculated as follows:
Step 1. Calculate the S u p ( x i , x j ) ( i , j = 1 , 2 , 3 ) Thereafter, we have
S u p ( ϕ 1 , ϕ 2 ) = 0.1 , S u p ( ϕ 1 , ϕ 3 ) = 0.2 , S u p ( ϕ 2 , ϕ 3 ) = 0.1 .
Step 2. Calculate the power weighting vector through Expression (19). Thereafter, we have
T ( ϕ 1 ) = S u p ( ϕ 1 , ϕ 2 ) + S u p ( ϕ 1 , ϕ 3 ) = 0.3 ,
T ( ϕ 2 ) = S u p ( ϕ 2 , ϕ 1 ) + S u p ( ϕ 2 , ϕ 3 ) = 0.2 ,
T ( ϕ 3 ) = S u p ( ϕ 3 , ϕ 1 ) + S u p ( ϕ 3 , ϕ 2 ) = S u p ( ϕ 1 , ϕ 3 ) + S u p ( ϕ 2 , ϕ 3 ) = 0.3 .
Step 3. Calculate the P A ( ϕ 1 , ϕ 2 , ϕ 3 ) using the equation 15 (suppose p = q = 1). Thereafter, we can have
P A ( ϕ 1 , ϕ 2 , ϕ 3 ) = i = 1 3 ( ( 1 + T ( ϕ i ) ) ϕ i i = 1 3 ( ( 1 + T ( ϕ i ) ) = ( ( 1 + T ( ϕ 1 ) ) ϕ 1 + ( ( 1 + T ( ϕ 2 ) ) ϕ 2 + ( ( 1 + T ( ϕ 3 ) ) ϕ 3 ( 1 + T ( ϕ 1 ) ) + ( 1 + T ( ϕ 2 ) ) + ( 1 + T ( ϕ 3 ) ) = ( 1 + 0.3 ) 0.6 + ( 1 + 0.2 ) 0.7 + ( 1 + 0.3 ) 0.8 ( 1 + 0.3 ) ( 1 + 0.2 ) ( 1 + 0.3 ) = 0.7
Beliakov [38] first proposed the Heronian mean operator, which can determine the interrelation of the input arguments [46,47,48]. HM is defined as follows.
Definition 7.
[48]. Let p , q 0 , and ϕ i ( i = 1 , 2 , , n ) be a group of nonnegative numbers. If
H M p , q ( ϕ 1 , ϕ 2 , , ϕ n ) = ( 2 n ( n + 1 ) i = 1 n j = i n ϕ i p ϕ j q ) 1 p + q
Then H M p , q is called the Heronian mean (HM) operator.
For example, suppose ϕ 1 = 0.6 , ϕ 2 = 0.7 , ϕ 3 = 0.8 are nonnegative numbers, the H M p , q ( ϕ 1 , ϕ 2 , ϕ 3 ) are calculated as follow (suppose p = q = 1):
H M 1 , 1 ( ϕ 1 , ϕ 2 , , ϕ n ) = ( 2 3 ( 3 + 1 ) i = 1 n j = i n ϕ i 1 ϕ j 1 ) 1 2 = ( 2 3 ( 3 + 1 ) ϕ 1 ϕ 1 + ϕ 1 ϕ 2 + ϕ 1 ϕ 3 + ϕ 2 ϕ 2 + ϕ 2 ϕ 3 + ϕ 3 ϕ 3 ) 1 2 = ( 1 6 ( 0.6 0.6 + 0.6 0.7 + 0.6 0.8 + 0.7 0.7 + 0.7 0.8 + 0.8 0.8 ) ) 1 2 = ( 1 6 × 2 . 95 ) 1 2 0 . 7012
Next, we shall develop the SVNPHA and SVNWPHA operators based on the operation laws of SVNNs.
Definition 8.
Let p , q 0 , and x i = ( T i , I i , F i ) ( i = 1 , 2 , , n ) be a collection of SVNNs. If
S V N P H A p , q ( x 1 , x 2 , , x n ) = ( 2 n ( n + 1 ) i = 1 , j = i n ( ( n ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) x i ) p ( n ( 1 + T ( x j ) ) t = 1 n ( 1 + T ( x t ) ) x j ) q ) ) 1 p + q
where T ( x i ) = j = 1 , j i n S u p ( x i , x j ) . We shall denote S u p ( x i , x j ) as the support degree for x i from x j . S u p ( x i , x j ) satisfies the following three properties:
(1) S u p ( x i , x j ) [ 0 , 1 ] ;
(2) S u p ( x i , x j ) = S u p ( x j , x i ) ;
(3) S u p ( x i , x j ) > S u p ( x l , x k ) , if d ( x i , x j ) < d ( x l , x k ) in which d ( x i , x j ) is the distance between SVNNs x i and x j .
Then, S V N G P H A p , q is called the single-valued neutrosophic power Heronian aggregation (SVNPHA) operator.
In order to simply this expression (18). We can define:
w ˜ i = ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) .
and call ( w ˜ 1 , w ˜ 2 , , w ˜ n ) as the power weighting vector with w ˜ i 0 , i = 1 n w ˜ i = 1
Thereafter, Expression (18) can be expressed as follows:
S V N P H A p , q ( x 1 , x 2 , , x n ) = ( 2 n ( n + 1 ) i = 1 , j = i n ( ( n w ˜ i x i ) p ( n w ˜ j x j ) q ) ) 1 p + q
Theorem 2.
Let x i = ( T i , I i , F i ) ( i = 1 , 2 , , n ) be a group of SVNNs and p , q 0 . Then, the result aggregated from SVNPHA operator is still a SVNN, and even
S V N P H A p , q ( x 1 , x 2 , , x n ) = ( ( 1 ( i = 1 , j = i n ( 1 ( 1 ( 1 T i ) n w ˜ i ) p ( 1 ( 1 T j ) n w ˜ j ) q ) ) 2 n ( n + 1 ) ) 1 p + q ,
( 1 ( i = 1 . j = i n ( 1 ( 1 I i n w ˜ i ) p ( 1 I i n w ˜ j ) q ) ) 2 n ( n + 1 ) ) 1 p + q , ( 1 ( 1 ( i = 1 . j = i n ( 1 ( 1 F i n w ˜ i ) p ( 1 F i n w ˜ j ) q ) ) 2 n ( n + 1 ) ) 1 p + q )
Proof. 
To prove Equation (21), we first prove that the following equation is right.
i = 1 , j = i n ( ( n w ˜ i x i ) p ( n w ˜ j x j ) q ) = ( 1 i = 1 , j = i n ( 1 ( 1 ( 1 T i ) n w ˜ i ) p ( 1 ( 1 T j ) n w ˜ j ) q ) , i = 1 , j = i n ( 1 ( 1 I i n w ˜ i ) p ( 1 I j n w ˜ j ) q ) , i = 1 , j = i n ( 1 ( 1 F i n w ˜ i ) p ( 1 F j n w ˜ j ) q ) )
By the operational rules of SVNNs defined in (2–5), we have
( n w ˜ i x i ) p = ( ( 1 ( 1 T i ) n w ˜ i ) p , 1 ( 1 I i n w ˜ i ) p , 1 ( 1 F i n w ˜ i ) p ) ( n w ˜ j x j ) q = ( ( 1 ( 1 T j ) n w ˜ j ) q , 1 ( 1 I j n w ˜ j ) q , 1 ( 1 F j n w ˜ j ) q ) ( n w ˜ i x i ) p ( n w ˜ j x j ) q = ( ( 1 ( 1 T i ) n w ˜ i ) p ( 1 ( 1 T j ) n w ˜ j ) q , 1 ( 1 I i n w ˜ i ) p ( 1 I j n w ˜ j ) q , 1 ( 1 F i n w ˜ i ) p ( 1 F j n w ˜ j ) q )
When n = 2, we have
i = 1 , j = i 2 ( ( 2 w ˜ i x i ) p ( 2 w ˜ j x j ) q ) = ( ( 2 w ˜ 1 x 1 ) p ( 2 w ˜ 1 x 1 ) q ) ( ( 2 w ˜ 1 x 1 ) p ( 2 w ˜ 2 x 2 ) q ) ( ( 2 w ˜ 2 x 2 ) p ( 2 w ˜ 2 x 2 ) q ) = ( ( 1 ( 1 T 1 ) 2 w ˜ 1 ) p ( 1 ( 1 T 1 ) 2 w ˜ 1 ) q , 1 ( 1 I 1 2 w ˜ 1 ) p ( 1 I 1 2 w ˜ 1 ) q , 1 ( 1 F 1 2 w ˜ 1 ) p ( 1 F 1 2 w ˜ 1 ) q ) ( ( 1 ( 1 T 1 ) 2 w ˜ 1 ) p ( 1 ( 1 T 2 ) 2 w ˜ 2 ) q , 1 ( 1 I 1 2 w ˜ 1 ) p ( 1 I 2 2 w ˜ 2 ) q , 1 ( 1 F 1 2 w ˜ 1 ) p ( 1 F 2 2 w ˜ 2 ) q ) ( ( 1 ( 1 T 2 ) 2 w ˜ 2 ) p ( 1 ( 1 T 2 ) 2 w ˜ 2 ) q , 1 ( 1 I 2 2 w ˜ 2 ) p ( 1 I 2 2 w ˜ 2 ) q , 1 ( 1 F 2 2 w ˜ 2 ) p ( 1 F 2 2 w ˜ 2 ) q )
By using Equation (2), we get
= ( 1 i = 1 , j = i 2 ( 1 ( 1 ( 1 T i ) 2 w ˜ i ) p ( 1 ( 1 T j ) 2 w ˜ j ) q ) , i = 1 , j = i 2 ( 1 ( 1 I i 2 w ˜ i ) p ( 1 I j 2 w ˜ j ) q ) , i = 1 , j = i 2 ( 1 ( 1 F i 2 w ˜ i ) p ( 1 F j 2 w ˜ j ) q ) )
That is, when n = 2, the Equation (22) is right.
Assume n = m, Equation (22) is right:
= ( 1 i = 1 , j = i k ( 1 ( 1 ( 1 T i ) k w ˜ i ) p ( 1 ( 1 T j ) k w ˜ j ) q ) , i = 1 , j = i k ( 1 ( 1 I i k w ˜ i ) p ( 1 I j k w ˜ j ) q ) , i = 1 , j = i k ( 1 ( 1 F i k w ˜ i ) p ( 1 F j k w ˜ j ) q ) )
Furthermore, when n = k + 1, we have
i = 1 , j = i k + 1 ( ( ( k + 1 ) w ˜ i x i ) p ( ( k + 1 ) w ˜ j x j ) q ) = i = 1 , j = i k ( ( ( k + 1 ) w ˜ i x i ) p ( ( k + 1 ) w ˜ j x j ) q ) i = 1 k ( ( ( k + 1 ) w ˜ i x i ) p ( ( k + 1 ) w ˜ k + 1 x k + 1 ) q ) ( ( ( k + 1 ) w ˜ k + 1 x k + 1 ) p ( ( k + 1 ) w ˜ k + 1 x k + 1 ) q )
Firstly, we prove that
i = 1 k ( ( ( k + 1 ) w ˜ i x i ) p ( ( k + 1 ) w ˜ k + 1 x k + 1 ) q ) = ( 1 i = 1 k ( 1 ( 1 ( 1 T i ) ( k + 1 ) w ˜ i ) p ( 1 ( 1 T ( k + 1 ) ) ( k + 1 ) w ˜ ( k + 1 ) ) q ) , i = 1 k ( 1 ( 1 I i ( k + 1 ) w ˜ i ) p ( 1 I ( k + 1 ) ( k + 1 ) w ˜ ( k + 1 ) ) q ) , i = 1 k ( 1 ( 1 F i ( k + 1 ) w ˜ i ) p ( 1 F ( k + 1 ) ( k + 1 ) w ˜ ( k + 1 ) ) q ) )
We shall prove Equation (27) on mathematical induction on k
For k = 2, we have
i = 1 2 ( ( ( k + 1 ) w ˜ i x i ) p ( ( k + 1 ) w ˜ k + 1 x k + 1 ) q ) = ( ( 3 w ˜ 1 x 1 ) p ( 3 w ˜ 3 x 3 ) q ) ( ( 3 w ˜ 2 x 2 ) p ( 3 w ˜ 3 x 3 ) q ) = ( ( 1 ( 1 T 1 ) 3 w ˜ 1 ) p ( 1 ( 1 T 3 ) 3 w ˜ 3 ) q , 1 ( 1 I 1 3 w ˜ 1 ) p ( 1 I 3 3 w ˜ 3 ) q , 1 ( 1 F 1 3 w ˜ 1 ) p ( 1 F 3 3 w ˜ 3 ) q ) ( ( 1 ( 1 T 2 ) 3 w ˜ 2 ) p ( 1 ( 1 T 3 ) 3 w ˜ 3 ) q , 1 ( 1 I 2 3 w ˜ 2 ) p ( 1 I 3 3 w ˜ 3 ) q , 1 ( 1 F 2 3 w ˜ 2 ) p ( 1 F 3 3 w ˜ 3 ) q ) = ( 1 i = 1 2 ( 1 ( 1 ( 1 T i ) 3 w ˜ i ) p ( 1 ( 1 T 3 ) 3 w ˜ 3 ) q ) , i = 1 2 ( 1 ( 1 I i 3 w ˜ i ) p ( 1 I 3 3 w ˜ 3 ) q ) , i = 1 2 ( 1 ( 1 F i 3 w ˜ i ) p ( 1 F 3 3 w ˜ 3 ) q ) )
Suppose k = a, the Equation (27) is right, that is
i = 1 a ( ( ( a + 1 ) w ˜ i x i ) p ( ( a + 1 ) w ˜ a + 1 x a + 1 ) q ) = ( 1 i = 1 a ( 1 ( 1 ( 1 T i ) ( a + 1 ) w ˜ i ) p ( 1 ( 1 T ( a + 1 ) ) ( a + 1 ) w ˜ ( a + 1 ) ) q ) , i = 1 a ( 1 ( 1 I i ( a + 1 ) w ˜ i ) p ( 1 I ( a + 1 ) ( a + 1 ) w ˜ ( a + 1 ) ) q ) , i = 1 a ( 1 ( 1 F i ( a + 1 ) w ˜ i ) p ( 1 F ( a + 1 ) ( a + 1 ) w ˜ ( a + 1 ) ) q ) )
Then, when k = a + 1, we have
i = 1 a + 1 ( ( ( a + 2 ) w ˜ i x i ) p ( ( a + 2 ) w ˜ a + 2 x a + 2 ) q ) = i = 1 a ( ( ( a + 2 ) w ˜ i x i ) p ( ( a + 2 ) w ˜ a + 2 x a + 2 ) q ) ( ( ( a + 2 ) w ˜ a + 1 x a + 1 ) p ( ( a + 2 ) w ˜ a + 2 x a + 2 ) q ) = ( 1 i = 1 a ( 1 ( 1 ( 1 T i ) ( a + 2 ) w ˜ i ) p ( 1 ( 1 T ( a + 2 ) ) ( a + 2 ) w ˜ ( a + 2 ) ) q ) , i = 1 a ( 1 ( 1 I i ( a + 2 ) w ˜ i ) p ( 1 I ( a + 2 ) ( a + 2 ) w ˜ ( a + 2 ) ) q ) , i = 1 a ( 1 ( 1 F i ( a + 2 ) w ˜ i ) p ( 1 F ( a + 2 ) ( a + 2 ) w ˜ ( a + 2 ) ) q ) ) ( 1 ( 1 ( 1 ( 1 T ( a + 1 ) ) ( a + 2 ) w ˜ i ) p ( 1 ( 1 T ( a + 2 ) ) ( a + 2 ) w ˜ ( a + 2 ) ) q ) , ( 1 ( 1 I ( a + 1 ) ( a + 2 ) w ˜ ( a + 1 ) ) p ( 1 I ( a + 2 ) ( a + 2 ) w ˜ ( a + 2 ) ) q ) , ( 1 ( 1 F ( a + 1 ) ( a + 2 ) w ˜ ( a + 1 ) ) p ( 1 F ( a + 2 ) ( a + 2 ) w ˜ ( a + 2 ) ) q ) ) = ( 1 i = 1 a + 1 ( 1 ( 1 ( 1 T i ) ( a + 2 ) w ˜ i ) p ( 1 ( 1 T ( a + 2 ) ) ( a + 2 ) w ˜ ( a + 2 ) ) q ) , i = 1 a + 1 ( 1 ( 1 I i ( a + 2 ) w ˜ i ) p ( 1 I ( a + 2 ) ( a + 2 ) w ˜ ( a + 2 ) ) q ) , i = 1 a + 1 ( 1 ( 1 F i ( a + 2 ) w ˜ i ) p ( 1 F ( a + 2 ) ( a + 2 ) w ˜ ( a + 2 ) ) q ) )
Therefore, when k = a + 1, the Equation (27) is true. Hence, Equation (27) is established for any k.
Similarly, we can prove the other parts of Equation (26).
So, Equation (26) becomes
i = 1 , j = i k + 1 ( ( ( k + 1 ) w ˜ i x i ) p ( ( k + 1 ) w ˜ j x j ) q ) = ( 1 i = 1 , j = i ( k + 1 ) ( 1 ( 1 ( 1 T i ) ( k + 1 ) w ˜ i ) p ( 1 ( 1 T j ) ( k + 1 ) w ˜ j ) q ) , i = 1 , j = i ( k + 1 ) ( 1 ( 1 I i ( k + 1 ) w ˜ i ) p ( 1 I j ( k + 1 ) w ˜ j ) q ) , i = 1 , j = i ( k + 1 ) ( 1 ( 1 F i ( k + 1 ) w ˜ i ) p ( 1 F j ( k + 1 ) w ˜ j ) q ) )
Therefore, when n = k + 1, the Equation (22) is true. Hence, Equation (22) is established for any n. □
From Equation (22) and the operational rules of SVNNs defined in (2–5), we have
2 n ( n + 1 ) i = 1 , j = i n ( ( n w ˜ i x i ) p ( n w ˜ j x j ) q ) = ( ( 1 ( i = 1 , j = i n ( 1 ( 1 ( 1 T i ) n w ˜ i ) p ( 1 ( 1 T j ) n w ˜ j ) q ) ) 2 n ( n + 1 ) ( i = 1 , j = i n ( 1 ( 1 I i n w ˜ i ) p ( 1 I j n w ˜ j ) q ) ) 2 n ( n + 1 ) , ( i = 1 , j = i n ( 1 ( 1 F i n w ˜ i ) p ( 1 F j n w ˜ j ) q ) ) 2 n ( n + 1 ) ) ) ,
So
( 2 n ( n + 1 ) i = 1 , j = i n ( ( n w ˜ i x i ) p ( n w ˜ j x j ) q ) ) 1 p + q = ( ( 1 ( i = 1 , j = i n ( 1 ( 1 ( 1 T i ) n w ˜ i ) p ( 1 ( 1 T j ) n w ˜ j ) q ) ) 2 n ( n + 1 ) ) 1 p + q , 1 ( 1 ( i = 1 . j = i n ( 1 ( 1 I i n w ˜ i ) p ( 1 I i n w ˜ j ) q ) ) 2 n ( n + 1 ) ) 1 p + q , 1 ( 1 ( i = 1 . j = i n ( 1 ( 1 F i n w ˜ i ) p ( 1 F i n w ˜ j ) q ) ) 2 n ( n + 1 ) ) 1 p + q )
Therefore, Equation (21) is right and we complete the proof of the Theorem 2.
To compute the power weight vector w ˜ i , the support degree between SVNNs should be calculate firstly. Under normal circumstances, we can use the similarity degree between SVNNs to replace the support degree and that is,
S u p ( x i , x j ) = 1 d ( x i , x j )
Example 1.
Suppose three SVNNs exist: x 1 = ( 0.260 , 0.425 , 0.315 ) , x 2 = ( 0.220 , 0.450 , 0.330 ) , and x 3 = ( 0.255 , 0.500 , 0.245 ) . Accordingly, we can use SVNPHA to generate a comprehensive value. In the following, the steps are given.
Step 1. Calculate the S u p ( x i , x j ) ( i , j = 1 , 2 , 3 ) by using Expressions (15) and (22). Thereafter, we have
S u p ( x 1 , x 2 ) = 0.97142 S u p ( x 1 , x 3 ) = 0.94070
S u p ( x 2 , x 1 ) = 0.97142 S u p ( x 3 , x 1 ) = 0.93958
S u p ( x 3 , x 1 ) = 0.94070 S u p ( x 3 , x 2 ) = 0.93958
Step 2. Calculate the power weighting vector through Expression (19). Thereafter, we have
T ( x 1 ) = S u p ( x 1 , x 2 ) + S u p ( x 1 , x 3 ) = 1.91212
T ( x 2 ) = S u p ( x 2 , x 1 ) + S u p ( x 2 , x 3 ) = 1.91100
T ( x 3 ) = S u p ( x 3 , x 1 ) + S u p ( x 3 , x 2 ) = 1.88028
w ˜ 1 = 1 + T ( x 1 ) 3 + T ( x 1 ) + T ( x 2 ) + T ( x 3 ) = 1 + 1.91212 3 + 1.91212 + 1.91100 + 1.88028 = 0.33460
w ˜ 2 = 1 + T ( x 2 ) 3 + T ( x 1 ) + T ( x 2 ) + T ( x 3 ) = 1 + 1.91100 3 + 1.91212 + 1.91100 + 1.88028 = 0.33447
w ˜ 3 = 1 + T ( x 3 ) 3 + T ( x 1 ) + T ( x 2 ) + T ( x 3 ) = 1 + 1.88028 3 + 1.91212 + 1.91100 + 1.88028 = 0.33093
Step 3. Calculate the comprehensive value x = ( T , I , F ) using the SVNPHA operator (suppose p = q = 1). Thereafter, we can have
T = ( 1 ( i = 1 , j = i 3 ( 1 ( 1 ( 1 T i ) 3 w ˜ i ) ( 1 ( 1 T j ) 3 w ˜ j ) ) ) 2 3 ( 3 + 1 ) ) 1 2 = ( 1 ( ( 1 ( 1 ( 1 T 1 ) 3 w ˜ 1 ) ( 1 ( 1 T 1 ) 3 w ˜ 1 ) ) ( 1 ( 1 ( 1 T 1 ) 3 w ˜ 1 ) ( 1 ( 1 T 2 ) 3 w ˜ 2 ) ) ( 1 ( 1 ( 1 T 1 ) 3 w ˜ 1 ) ( 1 ( 1 T 3 ) 3 w ˜ 3 ) ) ( 1 ( 1 ( 1 T 2 ) 3 w ˜ 2 ) ( 1 ( 1 T 2 ) 3 w ˜ 2 ) ) ( 1 ( 1 ( 1 T 2 ) 3 w ˜ 2 ) ( 1 ( 1 T 3 ) 3 w ˜ 3 ) ) ( 1 ( 1 ( 1 T 3 ) 3 w ˜ 3 ) ( 1 ( 1 T 3 ) 3 w ˜ 3 ) ) ) 2 3 ( 3 + 1 ) ) 1 2 = 0.24518
and
I = 1 ( 1 ( i = 1 . j = i 3 ( 1 ( 1 I i 3 w ˜ i ) p ( 1 I i 3 w ˜ j ) q ) ) 2 3 ( 3 + 1 ) ) 1 2 = 1 ( 1 ( ( 1 ( 1 I 1 3 w ˜ 1 ) p ( 1 I 1 3 w ˜ 1 ) q ) ( 1 ( 1 I 1 3 w ˜ 1 ) p ( 1 I 2 3 w ˜ 2 ) q ) ( 1 ( 1 I 1 3 w ˜ 1 ) p ( 1 I 3 3 w ˜ 3 ) q ) ( 1 ( 1 I 2 3 w ˜ 2 ) p ( 1 I 2 3 w ˜ 2 ) q ) ( 1 ( 1 I 2 3 w ˜ 2 ) p ( 1 I 3 3 w ˜ 3 ) q ) ( 1 ( 1 I 3 3 w ˜ 3 ) p ( 1 I 3 3 w ˜ 3 ) q ) ) 2 3 ( 3 + 1 ) ) 1 2 = 0.45754
and
F = 1 - ( 1 ( i = 1 . j = i 3 ( 1 ( 1 F i 3 w ˜ i ) p ( 1 F i 3 w ˜ j ) q ) ) 2 3 ( 3 + 1 ) ) 1 2
I = 1 ( 1 ( ( 1 ( 1 F 1 3 w ˜ 1 ) p ( 1 F 1 3 w ˜ 1 ) q ) ( 1 ( 1 F 1 3 w ˜ 1 ) p ( 1 F 2 3 w ˜ 2 ) q ) ( 1 ( 1 F 1 3 w ˜ 1 ) p ( 1 F 3 3 w ˜ 3 ) q ) ( 1 ( 1 F 2 3 w ˜ 2 ) p ( 1 F 2 3 w ˜ 2 ) q ) ( 1 ( 1 F 2 3 w ˜ 2 ) p ( 1 F 3 3 w ˜ 3 ) q ) ( 1 ( 1 F 3 3 w ˜ 3 ) p ( 1 F 3 3 w ˜ 3 ) q ) ) 2 3 ( 3 + 1 ) ) 1 2 = 0.29532
Thus, we can obtain the comprehensive value x = ( 0.24519 , 0.45746 , 0.29532 ) .
Theorem 3.
(Idempotency). Let x i ( i = 1 , 2 , , n ) be a collection of SVNNs and x 1 = x 2 = = x n = x . Hence,
S V N P H A p , q ( x 1 , x 2 , , x n ) = x .
Proof. 
S V N P H A p , q ( x 1 , x 2 , , x n ) = ( 2 n ( n + 1 ) i = 1 , j = i n ( ( n w ˜ i x i ) p ( n w ˜ j x j ) q ) ) 1 p + q = ( 2 n ( n + 1 ) i = 1 , j = i n ( ( n w ˜ i x ) p ( n w ˜ j x ) q ) ) 1 p + q = ( 2 n ( n + 1 ) i = 1 , j = i n ( ( n 1 n x ) p ( n 1 n x ) q ) ) 1 p + q = ( 2 n ( n + 1 ) i = 1 , j = i n ( x p + q ) ) 1 p + q = x
thereby completing the proof of Theorem 3. □
Theorem 4.
(Commutativity). Let ( x 1 , x 2 , x n ) be any permutation of ( x 1 , x 2 , , x n ) , then S V N P H A p , q ( x 1 , x 2 , x n ) = S V N P H A p , q ( x 1 , x 2 , , x n )
Proof. 
Since ( x 1 , x 2 , x n ) be any permutation of ( x 1 , x 2 , , x n ) , then
S V N P H A p , q ( x 1 , x 2 , , x n ) = ( 2 n ( n + 1 ) i = 1 , j = i n ( ( n w ˜ i x i ) p ( n w ˜ j x j ) q ) ) 1 p + q = ( 2 n ( n + 1 ) i = 1 , j = i n ( ( n w ˜ i x i ) p ( n w ˜ j x j ) q ) ) 1 p + q = S V N P H A p , q ( x 1 , x 2 , , x n )
thereby completing the proof of Theorem 4.□
Theorem 5.
(Boundedness). Let x i = ( T i , I i , F i ) ( i = 1 , 2 , , n ) be a collection of SVNNs, x = ( min i { T i } , max i { I i } , max i { F i } ) , and x + = ( max i { T i } , min i { I i } , min i { F i } ) . Hence,
x S V N P H A p , q ( x 1 , x 2 , , x n ) x +
Proof. 
By the comparison method in Definition 3, we have x i x , then based on the theorem 2 and 3, we have
S V N P H A p , q ( x 1 , x 2 , , x n ) S V N P H A p , q ( x , x , , x ) = x
Similarly, we can obtain
S V N P H A p , q ( x 1 , x 2 , , x n ) S V N P H A p , q ( x + , x + , , x + ) = x + , then
S V N P H A p , q ( x 1 , x 2 , , x n ) S V N P H A p , q ( x + , x + , , x + ) = x + , then ( 30 ) x S V N P H A p , q ( x 1 , x 2 , , x n ) x +
thereby completing the proof of Theorem 5.□
In the follow, we can discuss some special cases about S V N N P H A p , q operator.
(1) If q = 0 , then the Expression (21) operator is reduced to the single-valued neutrosophic power generalized linear descending weight operator as follows:
S V N P H A p , 0 ( x 1 , x 2 , , x n ) = ( ( 1 ( i = 1 , n ( 1 ( 1 ( 1 T i ) n w ˜ i ) p ) n + 1 i ) 2 n ( n + 1 ) ) 1 p , ( 1 ( i = 1 n ( 1 ( 1 I i n w ˜ i ) p ) n + 1 i ) 2 n ( n + 1 ) ) 1 p , 1 ( 1 ( i = 1 n ( 1 ( 1 F i n w ˜ i ) p ) n + 1 i ) 2 n ( n + 1 ) ) 1 p )
(2) If p = 0 then the Expression (21) operator is reduced to the single-valued neutrosophic power generalized linear ascending weight operator as follows:
S V N P H A q ( x 1 , x 2 , , x n ) = ( ( 1 ( i = 1 , j = i n ( 1 ( 1 ( 1 T j ) n w ˜ j ) q ) i ) 2 n ( n + 1 ) ) 1 q , ( 1 ( i = 1 , j = i n ( 1 ( 1 I j n w ˜ j ) q ) i ) 2 n ( n + 1 ) ) 1 q , 1 ( 1 ( i = 1 , j = i n ( 1 ( 1 F j n w ˜ j ) q ) i ) 2 n ( n + 1 ) ) 1 q )
(3) If p = q = 1 2 , then the Expression (21) operator is reduced to the single-valued neutrosophic power basic Heronian operator as follows:
S V N P H A 1 2 , 1 2 ( x 1 , x 2 , , x n ) = ( ( 1 ( i = 1 , j = i n ( 1 ( 1 ( 1 T i ) n ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) ) 1 2 ( 1 ( 1 T j ) n ( 1 + T ( x j ) ) t = 1 n ( 1 + T ( x t ) ) ) 1 2 ) ) 2 n ( n + 1 ) ) , ( 1 ( i = 1 . j = i n ( 1 ( 1 I i n ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) ) 1 2 ( 1 I i n ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) ) 1 2 ) ) 2 n ( n + 1 ) ) , 1 ( 1 ( i = 1 . j = i n ( 1 ( 1 F i n ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) ) 1 2 ( 1 F i n ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) ) 1 2 ) ) 2 n ( n + 1 ) ) )
(4) If p = q = 1 , then the operator of Equation (21) is reduced to the single-valued neutrosophic number power line Heronian operator as follows:
S V N P H A 1 , 1 ( x 1 , x 2 , , x n ) = ( ( 1 ( i = 1 , j = i n ( 1 ( 1 ( 1 T i ) n ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) ) ( 1 ( 1 T j ) n ( 1 + T ( x j ) ) t = 1 n ( 1 + T ( x t ) ) ) ) ) 2 n ( n + 1 ) ) 1 2 , 1 ( 1 ( i = 1 . j = i n ( 1 ( 1 I i n ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) ) ( 1 I i n ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) ) ) ) 2 n ( n + 1 ) ) 1 2 , 1 ( 1 ( i = 1 . j = i n ( 1 ( 1 F i n ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) ) ( 1 F i n ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) ) ) ) 2 n ( n + 1 ) ) 1 2 )
In the SVNPHA operators, we only take into account the power weight vector and interrelationship among SVNNs but not the weight of every SVNN. However, in many realistic decision-making, the weights of attributes are also an important parameter. Thus, we propose the single-valued neutrosophic weight PHA (SVNWPHA) operator as follows.
Definition 9.
Let x i = ( T i , I i , F i ) ( i = 1 , 2 , , n ) be a group of SVNNs and p , q 0 , W = ( w 1 , w 2 , , w n ) T is the weight vector of x i ( i = 1 , 2 , , n ) , satisfying w i [ 0 , 1 ] and i n w i = 1 . If:
S V N W P H A p , q ( x 1 , x 2 , , x n ) = ( 1 n ( n + 1 ) i = 1 , j = i n ( ( n w ˜ i w i t = 1 n w ˜ t w t x i ) p ( n w ˜ j w j t = 1 n w ˜ t w t x j ) q ) ) 1 p + q
where w ˜ i = ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) and i n w ˜ i = 1 . T ( x i ) = j = 1 , j i n S u p ( x i , x j ) we shall denote S u p ( x i , x j ) as the support degree for x i from x j . S u p ( x i , x j ) satisfies the following three properties:
(1) S u p ( x i , x j ) [ 0 , 1 ] ;
(2) S u p ( x i , x j ) = S u p ( x j , x i ) ;
(3) S u p ( x i , x j ) > S u p ( x l , x k ) , if d ( x i , x j ) < d ( x l , x k ) in which d ( x i , x j ) is the distance between SVNNs x i and x j .
Then, S V N W P H A p , q is called the single-valued neutrosophic weight power Heronian aggregation (SVNPHA) operator.
Theorem 6.
Let p , q 0 and x i = ( T i , I i , F i ) ( i = 1 , 2 , , n ) be a collection of SVNNs, W = ( w 1 , w 2 , , w n ) T , satisfying w i [ 0 , 1 ] and i n w i = 1 . Then, the result aggregated from SVNWPHA is still a SVNNs, and even
S V N W P H A p , q ( x 1 , x 2 , , x n ) = ( ( 1 ( i = 1 , j = i n ( 1 ( 1 ( 1 T i ) n w ˜ i w i t = 1 n w ˜ t w t ) p ( 1 ( 1 T j ) n w ˜ j w j t = 1 n w ˜ t w t ) q ) ) 2 n ( n + 1 ) ) 1 p + q , ( 1 ( i = 1 . j = i n ( 1 ( 1 I i n w ˜ i w i t = 1 n w ˜ t w t ) p ( 1 I i n w ˜ j w j t = 1 n w ˜ t w t ) q ) ) 2 n ( n + 1 ) ) 1 p + q , 1 ( 1 ( i = 1 . j = i n ( 1 ( 1 F i n w ˜ i w i t = 1 n w ˜ t w t ) p ( 1 F i n w ˜ j w j t = 1 n w ˜ t w t ) q ) ) 2 n ( n + 1 ) ) 1 p + q )
As with the proof of Theorem 2, it is omitted from this paper.
Obviously, when W = ( 1 / n , 1 / n , , 1 / n ) T , the SVNWPHA operator is reduced to the SVNPHA operator.
Similar to the above SVNPHA operator, the SVNWPHA operator also has the same properties.
Theorem 7.
(Idempotency). Let x i ( i = 1 , 2 , , n ) be a collection of SVNNs, W = ( w 1 , w 2 , , w n ) T , satisfying w i [ 0 , 1 ] and i n w i = 1 , and x 1 = x 2 = = x n = x . Hence,
S V N W P H A p , q ( x 1 , x 2 , , x n ) = x .
Theorem 8.
(Commutativity). Let ( x 1 , x 2 , x n ) be any permutation of ( x 1 , x 2 , , x n ) , W = ( w 1 , w 2 , , w n ) T , satisfying w i [ 0 , 1 ] and i n w i = 1 . Hence,
S V N W P H A p , q ( x 1 , x 2 , x n ) = S V N W P H A p , q ( x 1 , x 2 , , x n )
.
Theorem 9.
(Boundedness). Let x i = ( T i , I i , F i ) ( i = 1 , 2 , , n ) be a collection of SVNNs W = ( w 1 , w 2 , , w n ) T , satisfying w i [ 0 , 1 ] and i n w i = 1 , x = ( min i { T i } , max i { I i } , max i { F i } ) , and x + = ( max i { T i } , min i { I i } , min i { F i } ) . Hence,
x S V N W P H A p , q ( x 1 , x 2 , , x n ) x +

3.2. Single Valued Neutrosophic Geometric Power Heronian Aggregation Operators

Based on the PA operator [36] and geometric mean [49], Xu [37] further defined a power geometric (PG) operator:
Definition 10.
[37]. Let p , q 0 , and ϕ i ( i = 1 , 2 , , n ) be a collection of nonnegative numbers. if:
P G ( ϕ 1 , ϕ 2 , , ϕ n ) = i = 1 n ϕ i 1 + T ( ϕ i ) i = 1 n ( ( 1 + T ( ϕ i ( (
where T ( ϕ i ) = j = 1 , j i n S u p ( ϕ i , ϕ j ) . We denote S u p ( ϕ i , ϕ j ) as the support degree for ϕ i from ϕ j . S u p ( ϕ i , ϕ j ) > S u p ( ϕ l , ϕ k ) satisfies the following axioms:
(1) S u p ( ϕ i , ϕ j ) [ 0 , 1 ] ;
(2) S u p ( ϕ i , ϕ j ) S u p ( ϕ j , ϕ i )
(3) S u p ( ϕ i , ϕ j ) > S u p ( ϕ l , ϕ k ) , if | ϕ i ϕ j | < | ϕ l ϕ k |
Definition 11.
[39]. Let p , q 0 , and ϕ i ( i = 1 , 2 , , n ) be a collection of nonnegative numbers. If:
G H M p , q ( ϕ 1 , ϕ 2 , , ϕ n ) = 1 p + q ( i = 1 , j = i n ( p ϕ i + q ϕ j ) 2 n ( n + 1 ) )
Then G H M p , q is called the geometric Heronian mean (GHM) operator.
Next, we shall develop the SVNGPHA and SVNWGPHA operators based on the operation laws of SVNNs.
Definition 12.
Let p , q 0 , and x i = ( T i , I i , F i ) ( i = 1 , 2 , , n ) be a collection of single-valued neutrosophic numbers. if:
S V N G P H A p , q ( x 1 , x 2 , , x n ) = 1 p + q i = 1 , j = i n ( p x i a i n 1 + T ( x i ) i = 1 n ( ( 1 + T ( x i ( ( q x j n 1 + T ( x j ) i = 1 n ( ( 1 + T ( x j ( ( ) 2 n ( n + 1 )
where T ( x i ) = j = 1 , j i n S u p ( x i , x j ) . we shall denote S u p ( x i , x j ) as the support degree for x i from x j . S u p ( x i , x j ) satisfies the following three properties:
(1) S u p ( x i , x j ) [ 0 , 1 ] ;
(2) S u p ( x i , x j ) = S u p ( x j , x i )
(3) S u p ( x i , x j ) > S u p ( x j , x i ) , if d ( x i , x j ) < d ( x l , x k ) in which d ( x i , x j ) is the distance between SVNNs x i and x j
Then, S V N G P H A p , q is called the single-valued neutrosophic geometric power Heronian aggregation (SVNGPHA) operator.
In order to simply this expression X. We can define
w ˜ i = ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) )
and call ( w ˜ 1 , w ˜ 2 , , w ˜ n ) as the power weighting vector with w i 0 , i = 1 n w i = 1 .
Then, Expression (18) can be shown as follows:
S V N G P H A p , q ( x 1 , x 2 , , x n ) = 1 p + q i = 1 , j = i n ( p x i n w ˜ i q x j n w ˜ j ) 2 n ( n + 1 )
Theorem 10.
Let p , q 0 , and x i = ( T i , I i , F i ) ( i = 1 , 2 , , n ) be a collection of SVNNs. Then, the result aggregated from SVNGPHA is still a SVNN, and even
S V N N P G H A p , q ( x 1 , x 2 , , x n ) = ( 1 ( 1 i = 1 , j = i n ( 1 ( 1 T i n w ˜ i ) p ( 1 T j n w ˜ j ) q ) 2 n ( n + 1 ) ) 1 p + q , ( 1 i = 1 . j = i n ( 1 ( 1 ( 1 I i ) n w ˜ i ) p ( 1 ( 1 I j ) n w ˜ j ) q ) 2 n ( n + 1 ) ) 1 p + q , ( 1 i = 1 . j = i n ( 1 ( 1 ( 1 F i ) n w ˜ i ) p ( 1 ( 1 F j ) n w ˜ j ) q ) 2 n ( n + 1 ) ) 1 p + q )
Similar to the above SVNPHA operator, the SVNGPHA operator also has the same properties.
Theorem 11.
(Idempotency). Let x i ( i = 1 , 2 , , n ) be a collection of SVNNs, and x 1 = x 2 = = x n = x , then
S V N G P H A p , q ( x 1 , x 2 , , x n ) = x .
Theorem 12.
(Commutativity). Let ( x 1 , x 2 , x n ) be any permutation of ( x 1 , x 2 , , x n ) , then
S V N G P H A p , q ( x 1 , x 2 , x n ) = S V N G P H A p , q ( x 1 , x 2 , , x n )
Theorem 13.
(Boundedness). Let x i = ( T i , I i , F i ) ( i = 1 , 2 , , n ) be a collection of SVNNs, and x = ( min i { T i } , max i { I i } , max i { F i } ) , x + = ( max i { T i } , min i { I i } , min i { F i } ) then
x S V N G P H A p , q ( x 1 , x 2 , , x n ) x +
In the SVNGPHA operators, we only take into account the power weight vector and interrelationship among SVNNs but not the weight of every SVNN. However, in many realistic decision-making, the weights of attributes are also an important parameter. Thus, we propose the single-valued neutrosophic numbers weight geometric power Heronian aggregation (SVNWGPHA) operator as follows.
Definition 13.
Let p , q 0 , and x i = ( T i , I i , F i ) ( i = 1 , 2 , , n ) be a collection of single-valued neutrosophic numbers, W = ( w 1 , w 2 , , w n ) T is the weight vector of x i ( i = 1 , 2 , , n ) , satisfying w i [ 0 , 1 ] and i n w i = 1 . If:
S V N W G P H A p , q ( x 1 , x 2 , , x n ) = 1 p + q i = 1 , j = i n ( p x i n w ˜ i w i t = 1 n w ˜ t w t q x j n w ˜ j w j t = 1 n w ˜ t w t ) 2 n ( n + 1 )
where w ˜ i = ( 1 + T ( x i ) ) t = 1 n ( 1 + T ( x t ) ) and i n w ˜ i = 1 . T ( x i ) = j = 1 , j i n S u p ( x i , x j ) . We shall denote S u p ( x i , x j ) as the support degree for x i from x j . S u p ( x i , x j ) satisfies the following three properties:
(1) S u p ( x i , x j ) [ 0 , 1 ] ;
(2) S u p ( x i , x j ) = S u p ( x j , x i ) ;
(3) S u p ( x i , x j ) > S u p ( x l , x k ) , if d ( x i , x j ) < d ( x l , x k ) in which d ( x i , x j ) is the distance between SVNNs x i and x j .
Then, S V N W G P H A p , q is called the single-valued neutrosophic weight geometric power Heronian aggregation (SVNWGPHA) operator.
Theorem 14.
Let p , q 0 , and x i = ( T i , I i , F i ) ( i = 1 , 2 , , n ) be a collection of SVNNs, W = ( w 1 , w 2 , , w n ) T , satisfying w i [ 0 , 1 ] and i n w i = 1 . Then, the result aggregated from SVNWGPHA is still a SVNNs, and even
S V N W G P H A p , q ( x 1 , x 2 , , x n ) = ( 1 ( 1 i = 1 , j = i n ( 1 ( 1 T i w i w ˜ i ) p ( 1 T j w j w ˜ j ) q ) 2 n ( n + 1 ) ) 1 p + q , ( 1 i = 1 . j = i n ( 1 ( 1 ( 1 I i ) w i w ˜ i ) p ( 1 ( 1 I j ) w j w ˜ j ) q ) 2 n ( n + 1 ) ) 1 p + q , ( 1 i = 1 . j = i n ( 1 ( 1 ( 1 F i ) w i w ˜ i ) p ( 1 ( 1 F j ) w j w ˜ j ) q ) 2 n ( n + 1 ) ) 1 p + q )
Similar to the proof of Theorem 2 it is omitted in this study.
Obviously, when W = ( 1 / n , 1 / n , , 1 / n ) T , the SVNWGPHA operator is reduced to the SVNGPHA operator.
Similar to the SVNWPHA operator, the SVNWGPHA operator has the same properties.
Theorem 15.
(Idempotency). Let x i ( i = 1 , 2 , , n ) be a collection of SVNNs, W = ( w 1 , w 2 , , w n ) T , satisfying w i [ 0 , 1 ] and i n w i = 1 , and x 1 = x 2 = = x n = x , then S V N W G P H A p , q ( x 1 , x 2 , , x n ) = x .
Theorem 16.
(Commutativity). Let ( x 1 , x 2 , x n ) be any permutation of ( x 1 , x 2 , , x n ) W = ( w 1 , w 2 , , w n ) T , satisfying w i [ 0 , 1 ] and i n w i = 1 then
S V N W G P H A p , q ( x 1 , x 2 , x n ) = S V N W G P H A p , q ( x 1 , x 2 , , x n )
Theorem 17.
(Boundedness). Let x i = ( T i , I i , F i ) ( i = 1 , 2 , , n ) be a collection of SVNNs, W = ( w 1 , w 2 , , w n ) T , satisfying w i [ 0 , 1 ] And i n w i = 1 and x = ( min i { T i } , max i { I i } , max i { F i } ) , x + = ( max i { T i } , min i { I i } , min i { F i } ) then
x S V N W G P H A p , q ( x 1 , x 2 , , x n ) x +

4. MAGDM Method Based on the SVNWPHA or SVNWGPHA Operator

In this part, we introduce the application of the SVNWPHA or SVNWGPHA operator in MAGDM. Given the MAGDM problems based on SVNNs, let E = { E 1 , E 2 , , E m } be the set of alternatives and G = { G 1 , G 2 , , G n } be the set of attributes respectively. The is the weight of the attributes G j ( j = 1 , 2 , , n ) , where 0 w j 1 ( j = 1 , 2 , , n ) and k = 1 t γ k = 1 . Suppose that the set of decision makers is D = { D 1 , D 2 , , D t } and γ k ( k = 1 , 2 , , t ) represents a weight of decision maker D k with 0 γ k 1 ( k = 1 , 2 , , t ) , k = 1 t γ k = 1 . Suppose that H k = [ φ i j k ] m × n is the decision matrix, where φ i j k = ( T i j k , I i j k , F i j k ) takes the form of SVNN, T i j k , I i j k , F i j k [ 0 , 1 ] , and 0 T i j k + I i j k + F i j k 3 , which describes the decision-making information of the attributes G j in terms of the alternative E i provided by the decision maker D k . Accordingly, the rank of the alternatives based on the decision information given by decision makers could be attained.
The method includes the following steps:
Step 1: Calculate the supports S u p ( φ i j k , φ i j h ) ( k , h = 1 , 2 , 3 , , t ) by
S u p ( φ i j k , φ i j h ) = 1 d ( φ i j k , φ i j h )
where d ( φ i j k , φ i j h ) is the normalized Euclidian distance between two SVNNs is φ i j k and φ i j h , which is given in Definition 5.
Step 2: Calculate
T ( φ i j k ) = j = 1 , j i n S u p ( φ i j k , φ i j h ) ( k , h = 1 , 2 , 3 , , t )
Step 3: Calculate the weight vector w ˜ i k of power operator associated with the SVNNs φ i j k
w ˜ i j k = ( 1 + T ( φ i j k ) ) k = 1 t ( 1 + T ( φ i j k ) ) ( k = 1 , 2 , , t )
Step 4: Aggregate and fuse the decision information given by each decision maker D k ( k = 1 , 2 , , t ) by
φ ¯ i j = ( T i j , I i j , F i j ) = S V N W P H A p , q ( φ i j 1 , φ i j 2 , , φ i j t )
Or φ ¯ i j = ( T i j , I i j , F i j ) = S V N W G P H A p , q ( φ i j 1 , φ i j 2 , , φ i j t )
in order to get the collective decision matrix H = [ φ ¯ i j ] m × n ( i = 1 , 2 , , m ; j = 1 , 2 , , n ) .
Step 5: Calculate the supports S u p ( φ i k , φ i j ) ( i = 1 , 2 , , m ; h , j = 1 , 2 , , n ) by
S u p ( φ i k , φ i j ) = 1 d ( φ i k , φ i j )
where d ( φ i k , φ i j ) is the normalized Euclidian distance between two SVNNs is φ i k and φ i j , which is given in Definition 5.
Step 6: Calculate
T ( φ ˜ i j ) = k = 1 , k j n S u p ( φ i j , φ i k ) ( k , j = 1 , 2 , 3 , , n ) .
Step 7: Calculate the weight vector w ˜ i of power operator associated with the SVNNs φ i j k
w ˜ i j = ( 1 + T ( φ i j ) ) j = 1 n ( 1 + T ( φ i j ) ) ( j = 1 , 2 , , n )
Step 8: Compute the comprehensive value of each alternative by
φ i = S V N W P H A p , q ( φ ¯ i 1 , φ ¯ i 2 , , φ ¯ i n )
or φ i = S V N W G P H A p , q ( φ ¯ i 1 , φ ¯ i 2 , , φ ¯ i n )
where ( i = 1 , 2 , 3 , , m )
Step 9: Obtain the score S ( φ i ) , accuracy H ( φ i ) , and certainty c ( φ i ) functions based on Definition 4.
Step 10: Ranking φ i ( i = 1 , 2 , , n ) by the comparison method in Definition 5.
Step 11: End.

5. Illustrative Example

This section verified the application and effectiveness of the proposed method by using an example for the MAGDM problem.
Example 2.
Assuming that the air quality in Guangzhou needs to be assessed, and the air quality data in Guangzhou for 2006–2009 was collected as a series of alternatives that is { E 1 , E 2 , E 3 , E 4 } = { 2006 , 2007 , 2008 , 2009 } [32]. Accordingly, three attributes are considered: (1) S O 2 ( G 1 ) (2) N O 2 ( G 2 ) (3) P H 10 ( G 3 ) . Importance degree of the measured attributes is W = ( 0.40 , 0.20 , 0.40 ) T . Three air quality monitoring stations assessed as experts are expressed by { D 1 , D 2 , D 3 } and the importance of these experts is γ = ( 0.314 , 0.355 , 0.331 ) T , respectively. Suppose that H k = [ φ i j k ] m × n is the decision matrix, where φ i j k = ( T i j k , I i j k , F i j k ) takes the form of SVNN, T i j k , I i j k , F i j k [ 0 , 1 ] , and 0 T i j k + I i j k + F i j k 3 , which describes the decision-making information of the attributes G j in terms of the alternative E i provided by the decision maker D k . Table 1, Table 2, and Table 3 show the three normalized standardized decision matrices from three experts by the SVNNs, respectively.

5.1. Decision-Making Steps

Use SVNWPHA operator to solve the problem involves the following steps:
Step 1: Calculate the supports S u p ( φ i j k , φ i j h ) ( k , h = 1 , 2 , 3 , , t ) by formulas (40) (for simplicity, we denote S u p ( φ i j k , φ i j h ) with S i j k h ), and we get
S 11 12 = S 11 21 = 0.89292 S 11 13 = S 11 31 = 0.94070 S 11 23 = S 11 32 = 0.90279
S 12 12 = S 12 21 = 0.91958 S 12 13 = S 12 31 = 0.92211 S 12 23 = S 12 32 = 0.97551
S 13 12 = S 13 21 = 0.80315 S 13 13 = S 13 31 = 0.93462 S 13 23 = S 13 32 = 0.75818
S 21 12 = S 21 21 = 0.94021 S 21 13 = S 21 31 = 0.91102 S 21 23 = S 21 32 = 0.94607
S 22 12 = S 22 21 = 0.90726 S 22 13 = S 22 31 = 0.86841 S 22 23 = S 22 32 = 0.88077
S 23 12 = S 23 21 = 0.80605 S 23 13 = S 23 31 = 0.85834 S 23 23 = S 23 32 = 0.91140
S 31 12 = S 31 21 = 0.94285 S 31 13 = S 31 31 = 0.87938 S 31 23 = S 31 32 = 0.93584
S 32 12 = S 32 21 = 0.82205 S 32 13 = S 32 31 = 0.80121 S 32 23 = S 32 32 = 0.93662
S 33 12 = S 33 21 = 0.89323 S 33 13 = S 33 31 = 0.92897 S 33 23 = S 33 32 = 0.89696
S 41 12 = S 41 21 = 0.94693 S 41 13 = S 41 31 = 0.96734 S 41 23 = S 41 32 = 0.97959
S 42 12 = S 42 21 = 0.92351 S 42 13 = S 42 31 = 0.93946 S 42 23 = S 42 32 = 0.88812
S 43 12 = S 43 21 = 0.91663 S 43 13 = S 43 31 = 0.88504 S 43 23 = S 43 32 = 0.96734
Step 2: Calculate the T ( φ i j k ) by formulas (41), and we get
T ( φ 11 1 ) = 1.83362 T ( φ 11 2 ) = 1.79571 T ( φ 11 3 ) = 1.84349
T ( φ 12 1 ) = 1.84170 T ( φ 12 2 ) = 1.89509 T ( φ 12 3 ) = 1.89762
T ( φ 13 1 ) = 1.73777 T ( φ 13 2 ) = 1.55367 T ( φ 13 3 ) = 1.68543
T ( φ 21 1 ) = 1.85123 T ( φ 21 2 ) = 1.88628 T ( φ 21 3 ) = 1.85710
T ( φ 22 1 ) = 1.77567 T ( φ 22 2 ) = 1.78803 T ( φ 22 3 ) = 1.74917
T ( φ 23 1 ) = 1.66439 T ( φ 23 2 ) = 1.71745 T ( φ 23 3 ) = 1.76974
T ( φ 31 1 ) = 1.82222 T ( φ 31 2 ) = 1.87868 T ( φ 31 3 ) = 1.81522
T ( φ 32 1 ) = 1.62326 T ( φ 32 2 ) = 1.75867 T ( φ 32 3 ) = 1.73783
T ( φ 33 1 ) = 1.68752 T ( φ 33 2 ) = 1.79019 T ( φ 33 3 ) = 1.69125
T ( φ 41 1 ) = 1.91427 T ( φ 41 2 ) = 1.92652 T ( φ 41 3 ) = 1.94693
T ( φ 42 1 ) = 1.75763 T ( φ 42 2 ) = 1.81164 T ( φ 42 3 ) = 1.72224
T ( φ 43 1 ) = 1.80167 T ( φ 43 2 ) = 1.88397 T ( φ 43 3 ) = 1.85238
Step 3: Calculate the weight vector w ˜ i j k by formulas (42), and we can have
w ˜ 11 1 = 0.33444 w ˜ 11 2 = 0.32996 w ˜ 11 3 = 0.33560
w ˜ 12 1 = 0.32911 w ˜ 12 2 = 0.33530 w ˜ 12 3 = 0.33559
w ˜ 13 1 = 0.32187 w ˜ 13 2 = 0.33659 w ˜ 13 3 = 0.34154
w ˜ 21 1 = 0.33222 w ˜ 21 2 = 0.33548 w ˜ 21 3 = 0.33230
w ˜ 22 1 = 0.33390 w ˜ 22 2 = 0.33539 w ˜ 22 3 = 0.33071
w ˜ 23 1 = 0.32686 w ˜ 23 2 = 0.33336 w ˜ 23 3 = 0.33978
w ˜ 31 1 = 0.33140 w ˜ 31 2 = 0.33803 w ˜ 31 3 = 0.33057
w ˜ 32 1 = 0.32307 w ˜ 32 2 = 0.33975 w ˜ 32 3 = 0.33718
w ˜ 33 1 = 0.32899 w ˜ 33 2 = 0.34156 w ˜ 33 3 = 0.32945
w ˜ 41 1 = 0.33163 w ˜ 41 2 = 0.33302 w ˜ 41 3 = 0.33535
w ˜ 42 1 = 0.33259 w ˜ 42 2 = 0.33910 w ˜ 42 3 = 0.32832
w ˜ 43 1 = 0.32814 w ˜ 43 2 = 0.33778 w ˜ 43 3 = 0.33408
Step 4: Aggregate and fuse the decision information given by each decision maker D k ( k = 1 , 2 , , t ) by φ ¯ i j = ( T i j , I i j , F i j ) = S V N W P H A p , q ( φ i j 1 , φ i j 2 , , φ i j t ) and get the collective decision matrix H = [ φ ¯ i j ] m × n ( i = 1 , 2 , , m ; j = 1 , 2 , , n ) .
H = [ ( 0.21711 , 0.41468 , 0 , 36736 ) ( 0.25588 , 0.42022 , 0.32522 ) ( 0.28543 , 0.41789 , 0.27328 ) ( 0.32463 , 0.30823 , 0.36485 ) ( 0.34967 , 0.28874 , 0.35349 ) ( 0.19520 , 0.52345 , 0.26649 ) ( 0.30911 , 0.37891 , 0.30961 ) ( 0.35477 , 0.47827 , 0.15918 ) ( 0.26718 , 0.50949 , 0.21400 ) ( 0.39419 , 0.33533 , 0.27024 ) ( 0.37427 , 0.33893 , 0.27872 ) ( 0.40485 , 0.49598 , 0.09536 ) ]
Step 5: Calculate the supports S u p ( φ i k , φ i j ) ( i = 1 , 2 , , m ; h , j = 1 , 2 , , n ) by formulas (45) (for simplicity, we denote S u p ( φ i k , φ i j ) with S i k , i j ), and we get
S 11 , 12 = S 12 , 11 = 0.96679 S 11 , 13 = S 13 , 11 = 0.93285 S 12 , 13 = S 13 , 12 = 0.96547
S 21 , 22 = S 22 , 21 = 0.98054 S 21 , 23 = S 23 , 21 = 0.84428 S 22 , 23 = S 23 , 22 = 0.83018
S 31 , 32 = S 32 , 31 = 0.89263 S 31 , 33 = S 33 , 31 = 0.90348 S 32 , 33 = S 33 , 32 = 0.93768
S 41 , 42 = S 42 , 41 = 0.98733 S 41 , 43 = S 43 , 41 = 0.86276 S 42 , 43 = S 43 , 42 = 0.85950
Step 6: Calculate the T ( φ ˜ i j ) by formulas (46), and we can have
T ( φ ˜ 11 ) = 1.89963 T ( φ ˜ 12 ) = 1.93226 T ( φ ˜ 13 ) = 1.89832
T ( φ ˜ 21 ) = 1.82482 T ( φ ˜ 22 ) = 1.81072 T ( φ ˜ 23 ) = 1.67446
T ( φ ˜ 31 ) = 1.79610 T ( φ ˜ 32 ) = 1.83031 T ( φ ˜ 33 ) = 1.84115
T ( φ ˜ 41 ) = 1.85009 T ( φ ˜ 42 ) = 1.84683 T ( φ ˜ 43 ) = 1.72226
Step 7: Calculate the weight vector w ˜ i j by formulas (47), and we can get
w ˜ 11 = 0.33200 w ˜ 12 = 0.33575 w ˜ 13 = 0.33225
w ˜ 21 = 0.33991 w ˜ 22 = 0.33807 w ˜ 23 = 0.32202
w ˜ 31 = 0.33036 w ˜ 32 = 0.33413 w ˜ 33 = 0.33551
w ˜ 41 = 0.33851 w ˜ 42 = 0.33816 w ˜ 43 = 0.32333
Step 8: Compute the comprehensive value of each alternative by formulas (48), and we can have
φ 1 = ( 0.25283 , 0.42147 , 0.32590 ) ,
φ 2 = ( 0.28233 , 0.38086 , 0.32904 ) ,
φ 3 = ( 0.30193 , 0.45360 , 0.23771 ) ,
φ 4 = ( 0.39140 , 0.39712 , 0.20151 )
φ 4 = ( 0.39140 , 0.39712 , 0.20151 ) .
Step 9: We calculate the value s ( x i ) of A i ( i = 1 , 2 , 3 , 4 )
s ( φ 1 ) = 0.50182
s ( φ 2 ) = 0.52414
s ( φ 3 ) = 0.53687
s ( φ 4 ) = 0.59759
Step 10: Rank the alternatives.
We use the score function s ( φ i ) as basis to can rank the alternatives { E 1 , E 2 , E 3 , E 4 } as follows: E 4 E 3 E 2 E 1 . Thus, the best alternative is E 4 .

5.2. Sensitivity Analysis with Different Parameters.

Sensitivity analysis is an effective tool to verify the validity of decision-making methods [50,51]. Considering that different parameters may lead to different decision results. In this section, a sensitivity analysis is performed to see whether the parameters p and q have an effect on the ranking result. We assign the different values of p and q to steps (1) and (2) in Section 5.1 respectively. Table 4 and Table 5 show the ranking results as following.
Table 4 and Table 5 show that the ranking results have a few differences when we assign the different values of and. For example, regarding the ranking results by the proposed method based on the SVNWPHA operator, if p = 0 and q = 1 , the ranking result is E 4 E 3 E 1 E 2 ; if p = 2 and q = 2 , the ranking result is E 4 E 3 E 2 E 1 ; if p = 10 and q = 10 the ranking order is E 4 E 2 E 3 E 1 . Hence, the regularity of the ranking order is difficult to obtain under this situation. However, when the parameters are above 0 and below 10, the ranking result is relatively stable. Accordingly, the best is E 4 .
In fact, the values of parameters p and q are considerably high, the calculation becomes substantially more complex, and the interactions between different attribute values become considerably prominent. In general, we recommend p = q = 1 for computational simplicity. This process is simple and straightforward and considers the interrelationship between input arguments. In addition, Table 4 and Table 5 show that as the increase of p and q, the score functions based on the SVNWGPHA operator became smaller and smaller, while SVNWPHA operator is contrary, becoming greater and greater.

5.3. Comparison with the Existing Methods

To verify the effectiveness and explain the advantage of the proposed method relating to the SVNWPHA and SVNWGPHA operators, we can plan to compare it with the method proposed by Li, Liu and Chen [33], which is based on the NNIGWHM operator; the method proposed by Yang and Li [34], which is based on the SVNPWA operator; and the method proposed by Ye [31], which is based on the SNSWAA operator. Table 6 shows the ranking results for these four methods.
In Table 6, we found that the ranking results by these different methods are the same, and that this can evidently explain and demonstrate the effectiveness of the proposed methods.
In the following, we likewise compare the desirable properties of our proposed SVNWPHA and SVNWGPHA operator with the NNIGWHM operator proposed by Li, Liu and Chen [33], the SVNPWA operator proposed by Yang and Li [34], and the SNSWAA operator proposed by Ye [31] to determine the advantages of the proposed operator, which are listed in Table 7.
Table 7 shows that only the proposed operators satisfy all of the properties. Our proposed operator and the NNIGWHM operator are related to the HM operators, which can consider the relationships between the aggregated arguments. Moreover, our proposed operator can also consider the support degree between aggregated arguments while NNIGWHM operator cannot consider it. To show this advantage of the proposed method, we give the following example.
Example 3.
We only change a little data from Example 2 in this example. After careful observation, we can find that there are lesser differences among the attribute values of alternation A 3 given by the air quality monitoring station D 1 , which are (0.365,0.300,0.335), (0.480,0.315,0.205), (0.340,0.370,0.290), the only difference between the old value and the new value is that we change the attribute value φ 31 1 from (0.365,0.300,0.335) to a small value (0.005,0.300,0.335), then we can observe the changes of ranking results for the method proposed by Li, Liu and Chen [33] and the proposed method with SVNWPHA operator. The ranking results are shown in Table 8.
From Table 8, we can find that the ranking results of the proposed method with SVNWPHA operator are different from the method proposed by Li, Liu and Chen [33] when changing the attribute value to a small value (0.005, 0.300, 0.335). The reason for resulting in this condition is that the proposed method considers the support degree between aggregated arguments and it can reduce the influence of unreasonable data. So, in this example, although the score function of alternation A 3 for two methods are becoming smaller, the ranking result by the proposed method is kept while it is changed by Li, Liu and Chen [33]’s method. This can verify the advantage of the proposed method, which can relieve the influence of the too big or too small data. It also can explain the result of the proposed method in this paper being more reasonable than the method of Li, Liu and Chen [40].
In addition, our proposed operator and the SVNPWA operator are based on the PA operators, which can alleviate the effects caused by unreasonable data through considering the support degree between input arguments. However, our proposed operator also considers the interrelationship of aggregated arguments while the SVNPWA operator cannot consider it. That is, the advantages of our proposed operator are that its combination with the PA and HM operators can acquire the advantages of the NNIGWHM and SVNPWA operators. The proposed method can consider the interrelationship of the aggregated arguments and consider the support degree between input arguments, which alleviates the effects caused by the unreasonable data. Furthermore, the operator has two parameters, thereby rendering it extremely flexible in the process of information aggregation. However, any type of operator has advantages and disadvantages because of the simultaneous consideration of the PA and HM operators. The proposed operator calculation is slightly more complicated than the other three.

6. Conclusions

Owing to the limitations of human thinking and the complexity of decision-making problems, the decision information involved in MAGDM problems is often incomplete, indeterminate, and inconsistent. SVNNs can easily and considerably depict this type of information. The power Heronianaggregation (PHA) operator can take the advantages of power average and HM operator. Based on the PHA and SVNNs, this study proposes the SVNPHA operator, SVNWPHA operator, SVNGPHA operator and SVNWGPHA operator. Then, we likewise investigated their properties in detail. Furthermore, we used the SVNWPHA and SVNWGPHA operators as bases to develop a method for MAGDM under the environment where the information is expressed by SVNNs. Lastly, we verified the application and effectiveness of the proposed method by using an example for the air quality evaluation. The main advantages of this study are as follows. Our method could consider the interrelationship of the aggregated arguments and alleviate the effects caused by the unreasonable data through taking into account the support degree between input arguments. Moreover, decision makers can choose the SVNWPHA or SVNWGPHA operators and changing the values of p and q in accordance with their subject preference and practical need. This condition renders the proposed method substantially flexible and reliable. However, because of the simultaneous consideration of the PA and HM operators, the proposed operator calculation is slightly complicated. In future research, other problems such as medical diagnosis and pattern recognition will be handled with these operators.

Author Contributions

All authors contributed equally to the present investigation.

Funding

This research received no external funding.

Acknowledgments

This work was supported by the National Natural Science Foundation of China (No. 71601061, 71331002, 71601109, 71771075 and 71771077) and the Ministry of Chinese Education, Humanities and Social Science Project (Grant no.17YJA630037).

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Zadeh, L.A. Fuzzy sets. Inf. Control 1965, 8, 338–353. [Google Scholar] [CrossRef] [Green Version]
  2. Atanassov, K.T. Intuitionistic fuzzy sets. Fuzzy Sets Syst. 1986, 20, 87–96. [Google Scholar] [CrossRef]
  3. Atanassov, K.T. More on intuitionistic fuzzy sets. Fuzzy Sets Syst. 1989, 33, 37–45. [Google Scholar] [CrossRef]
  4. Li, D.-F. The GOWA operator based approach to multiattribute decision making using intuitionistic fuzzy sets. Math. Comput.Model. 2011, 53, 1182–1196. [Google Scholar] [CrossRef]
  5. Wei, G. Some induced geometric aggregation operators with intuitionistic fuzzy information and their application to group decision making. Appl. Soft Comput. 2010, 10, 423–431. [Google Scholar] [CrossRef]
  6. Wu, J.; Chiclana, F.; Liao, H. Isomorphic Multiplicative Transitivity for Intuitionistic and Interval-Valued Fuzzy Preference Relations and Its Application in Deriving Their Priority Vectors. IEEE Trans. Fuzzy Sys. 2018, 26, 193–202. [Google Scholar] [CrossRef] [Green Version]
  7. Liu, P.; Chen, S.-M. Group decision making based on Heronian aggregation operators of intuitionistic fuzzy numbers. IEEE Trans. Cyber. 2017, 47, 2514–2530. [Google Scholar] [CrossRef]
  8. Büyüközkan, G.; Göçer, F. Application of a new combined intuitionistic fuzzy MCDM approach based on axiomatic design methodology for the supplier selection problem. Appl. Soft Comput. 2017, 52, 1222–1238. [Google Scholar] [CrossRef]
  9. Smarandache, F. Neutrosophic set-a generalization of the intuitionistic fuzzy set. In Proceedings of the 2006 IEEE International Conference on Granular Computing, Atlanta, GA, USA, 10–12 May 2006. [Google Scholar]
  10. Wang, H.; Smarandache, F.; Zhang, Y.Q.; Sunderraman, R. Single valued neutrosophic sets. Available online: http://citeseerx.ist.psu.edu/viewdoc/download;jsessionid=F60523660B815BCEC32D1E1973B6946B?doi=10.1.1.309.9470&rep=rep1&type=pdf (accessed on 18 December 2018).
  11. Liang, R.X.; Wang, J.Q.; Li, L. Multi-criteria group decision-making method based on interdependent inputs of single-valued trapezoidal neutrosophic information. Neural Comput. Appl. 2018, 30, 241–260. [Google Scholar] [CrossRef]
  12. Ji, P.; Zhang, H.Y.; Wang, J.Q. Selecting an outsourcing provider based on the combined MABAC–ELECTRE method using single-valued neutrosophic linguistic sets. Comput. Ind. Eng. 2018, 120, 429–441. [Google Scholar] [CrossRef]
  13. Ye, J. Single-valued neutrosophic similarity measures based on cotangent function and their application in the fault diagnosis of steam turbine. Soft Comput. 2017, 21, 817–825. [Google Scholar] [CrossRef]
  14. Biswas, P.; Pramanik, S.; Giri, B.C. TOPSIS method for multi-attribute group decision-making under single-valued neutrosophic environment. Neural Comput. Appl. 2016, 27, 727–737. [Google Scholar] [CrossRef]
  15. Ye, J. Multicriteria decision-making method using the correlation coefficient under single-valued neutrosophic environment. Int. J. Gen. Sys. 2013, 42, 386–394. [Google Scholar] [CrossRef]
  16. Majumdar, P.; Samanta, S.K. On similarity and entropy of neutrosophic sets. J. Intell. Fuzzy Sys. 2014, 26, 1245–1252. [Google Scholar]
  17. Şahin, R.; Küçük, A. Subsethood measure for single valued neutrosophic sets. J. Intell. Fuzzy Sys. 2015, 29, 525–530. [Google Scholar] [CrossRef]
  18. Stanujkić, D.; Karabašević, D. An extension of the WASPAS method for decision-making problems with intuitionistic fuzzy numbers: a case of website evaluation. Operational Research in Engineering Sciences. Theory Appl. 2018, 1, 29–39. [Google Scholar]
  19. Liu, F.; Aiwu, G.; Lukovac, V.; Vukic, M. A multicriteria model for the selection of the transport service provider: A single valued neutrosophic DEMATEL multicriteria model. Decis. Making Appl. Manag. Eng. 2018, 1, 121–130. [Google Scholar] [CrossRef]
  20. Pamučar, D.; Badi, I.; Sanja, K.; Obradović, R. A novel approach for the selection of power-generation technology using a linguistic neutrosophic CODAS method: A case study in Libya. Energies 2018, 11, 2489. [Google Scholar] [CrossRef]
  21. Pamučar, D.; Sremac, S.; Stević, Ž.; Ćirović, G.; Tomić, D. New multi-criteria LNN WASPAS model for evaluating the work of advisors in the transport of hazardous goods. Neural Comput. Appl. 1–24. [CrossRef]
  22. Deli, I.; Subas, Y. Single Valued Neutrosophic Numbers and Their Applications to Multicriteria Decision Making Problem. Available online: https://www.semanticscholar.org/paper/Single-valued-neutrosophic-numbers-and-their-to-Deli-Subas/3ab791f54ac60522cf336a687b2526230ba83fd9 (accessed on 18 December 2018).
  23. Ye, J. Multiple-attribute Decision-Making Method under a Single-Valued Neutrosophic Hesitant Fuzzy Environment. J. Intell. Fuzzy Sys. 2015, 24, 23–36. [Google Scholar] [CrossRef]
  24. Han, L.; Wei, C. Group decision making method based on single valued neutrosophic Choquet integral operator. Oper. Res. Trans. 2017, 21, 111–118. [Google Scholar]
  25. Peng, H.G.; Zhang, H.Y.; Wang, J.Q. Probability multi-valued neutrosophic sets and its application in multi-criteria group decision-making problems. Neural Comput. Appl. 2018, 30, 563–583. [Google Scholar] [CrossRef]
  26. Liu, C.; Luo, Y. Correlated aggregation operators for simplified neutrosophic set and their application in multi-attribute group decision making. J. Intell. Fuzzy Sys. 2016, 30, 1755–1761. [Google Scholar] [CrossRef]
  27. Yang, H.L.; Zhang, C.L.; Guo, Z.L.; Liu, Y.L.; Liao, X. A hybrid model of single valued neutrosophic sets and rough sets: single valued neutrosophic rough set model. Soft Comput. 2017, 21, 6253–6267. [Google Scholar] [CrossRef]
  28. Şahin, R.; Küçük, G.D. Group decision making with simplified neutrosophic ordered weighted distance operator. Math. Methods Appl. Sci. 2018, 41, 4795–4809. [Google Scholar] [CrossRef]
  29. Ji, P.; Wang, J.Q.; Zhang, H.Y. Frank prioritized Bonferroni mean operator with single-valued neutrosophic sets and its application in selecting third-party logistics providers. Neural Comput. Appl. 2018, 30, 799–823. [Google Scholar] [CrossRef]
  30. Ren, S.; Sugumaran, V. Multicriteria Decision-Making Method Under a Single Valued Neutrosophic Environment. Int. J. Intell. Inf. Technol. 2017, 13, 23–37. [Google Scholar] [CrossRef]
  31. Ye, J. A multicriteria decision-making method using aggregation operators for simplified neutrosophic sets. J. Intell. Fuzzy Sys. 2014, 26, 2459–2466. [Google Scholar]
  32. Liu, P.; Wang, Y. Multiple attribute decision-making method based on single-valued neutrosophic normalized weighted Bonferroni mean. Neural Comput. Appl. 2014, 25, 2001–2010. [Google Scholar] [CrossRef]
  33. Li, Y.; Liu, P.; Chen, Y. Some single valued neutrosophic number heronian mean operators and their application in multiple attribute group decision making. Informatica 2016, 27, 85–110. [Google Scholar] [CrossRef]
  34. Yang, L.; Li, B. A Multi-Criteria Decision-Making Method Using Power Aggregation Operators for Single-valued Neutrosophic Sets. Int. J. Database Theory Appl. 2017, 9, 23–32. [Google Scholar] [CrossRef]
  35. Wei, G.; Zhang, Z. Some single-valued neutrosophic Bonferroni power aggregation operators in multiple attribute decision making. J. Ambien.t Intell. Humaniz. Comput. 2019, 10, 863–882. [Google Scholar] [CrossRef]
  36. Yager, R.R. The power average operator. IEEE Trans. Sys. Man Cybern. Part A: Sys. Hum. 2001, 31, 724–731. [Google Scholar] [CrossRef]
  37. Xu, Z. Choquet integrals of weighted intuitionistic fuzzy information. Inf. Sci. 2010, 180, 726–736. [Google Scholar] [CrossRef]
  38. Beliakov, G.; Pradera, A.; Calvo, T. Aggregation Functions: A Guide for Practitioners. In Studies in Fuzziness and Soft Computing; Springer-Verlag: Berlin/Heidelberg, Germany, 2007. [Google Scholar] [Green Version]
  39. Yu, D. Intuitionistic fuzzy geometric Heronian mean aggregation operators. Appl. Soft Comput. J. 2013, 13, 1235–1246. [Google Scholar] [CrossRef]
  40. Liu, P. Multiple Attribute Group Decision Making Method Based on Interval-Valued Intuitionistic Fuzzy Power Heronian Aggregation Operators. Comput. Ind. Eng. 2017, 108, 199–212. [Google Scholar] [CrossRef]
  41. Liu, P.; Mahmood, T.; Khan, Q. Group Decision Making Based on Power Heronian Aggregation Operators Under Linguistic Neutrosophic Environment. Int. J. Fuzzy Syst. 2018, 20, 1–16. [Google Scholar] [CrossRef]
  42. Wang, H.; Smarandache, F.; Sunderraman, R.; Zhang, Y.-Q. Interval neutrosophic sets and logic: theory and applications in computing: Theory and applications in computing. Available online: https://arxiv.org/pdf/cs/0505014.pdf (accessed on 18 December 2018).
  43. Peng, J.J.; Wang, J.Q.; Wang, J.; Zhang, H.Y.; Chen, X.H. Simplified neutrosophic sets and their applications in multi-criteria group decision-making problems. Int. J. Sys. Sci. 2016, 47, 2342–2358. [Google Scholar] [CrossRef]
  44. Ye, J. Single-valued neutrosophic minimum spanning tree and its clustering method. J. Intell. Fuzzy Sys. 2014, 23, 311–324. [Google Scholar] [CrossRef]
  45. Ye, J. Clustering methods using distance-based similarity measures of single-valued neutrosophic sets. J. Intell. Fuzzy Syst. 2014, 23, 379–389. [Google Scholar] [CrossRef]
  46. Sýkora, S. Mathematical Means and Averages: Generalized Heronian Means; Stan’s Library: Castano Primo, Italy, 2009. [Google Scholar]
  47. Liu, H.; Pei, D. HOWA operator and its application to multi-attribute decision making. J. Zhejiang Sci-Tech Univ. 2012, 25, 138–142. [Google Scholar]
  48. Yu, D.; Wu, Y. Interval-valued intuitionistic fuzzy Heronian mean operators and their application in multi-criteria decision making. Afr. J. Bus. Manag. 2012, 6, 4158–4168. [Google Scholar] [CrossRef]
  49. Chiclana, F.; Herrera, F.; Herrera-Viedma, E. The Ordered Weighted Geometric Operator: Properties and Application in MCDM Problems. In Technologies for Constructing Intelligent Systems 2; Bouchon-Meunier, B., Gutiérrez-Ríos, J., Magdalena, L., Yager, R.R., Eds.; Physica: Hedelberg, Germany, 2002. [Google Scholar]
  50. Mukhametzyanov, I.; Pamucar, D. A sensitivity analysis in MCDM problems: A statistical approach. Decis. Making Appl. Manag. Eng. 2018, 1, 51–80. [Google Scholar] [CrossRef]
  51. Pamučar, D.S.; Božanić, D.; Ranđelović, A. Multi-criteria decision making: An example of sensitivity analysis. Serb. J. Manag. 2017, 12, 1–27. [Google Scholar] [CrossRef] [Green Version]
Table 1. Air quality data from air quality monitoring station D 1 .
Table 1. Air quality data from air quality monitoring station D 1 .
G 1 G 2 G 3
E 1 (0.265,0.350,0.385)(0.330,0.390,0.280)(0.245,0.275,0.480)
E 2 (0.345,0.245,0.410)(0.430,0.290,0.280)(0.245,0.275,0.480)
E 3 (0.365,0.300,0.335)(0.480,0.315,0.205)(0.340,0.370,0.290)
E 4 (0.430,0.300,0.270)(0.460,0.245,0.295)(0.310,0.520,0.170)
Table 2. Air quality data from air quality monitoring station D 2 .
Table 2. Air quality data from air quality monitoring station D 2 .
G 1 G 2 G 3
E 1 ( 0.125 , 0.470 , 0.405 ) ( 0.220 , 0.420 , 0.360 ) ( 0.345 , 0.490 , 0.165 )
E 2 ( 0.335 , 0.310 , 0.330 ) ( 0.300 , 0.370 , 0.330 ) ( 0.205 , 0.630 , 0.165 )
E 3 ( 0.315 , 0.380 , 0.305 ) ( 0.330 , 0.565 , 0.105 ) ( 0.280 , 0.520 , 0.200 )
E 4 ( 0.365 , 0.365 , 0.270 ) ( 0.355 , 0.320 , 0.325 ) ( 0.425 , 0.485 , 0.090 )
Table 3. Air quality data from air quality monitoring station D 3 .
Table 3. Air quality data from air quality monitoring station D 3 .
G 1 G 2 G 3
E 1 ( 0.260 , 0.425 , 0.315 ) (0.220, 0.450, 0.330) ( 0.255 , 0.500 , 0.245 )
E 2 ( 0.270 , 0.370 , 0.360 ) ( 0.320 , 0.215 , 0.465 ) ( 0.135 , 0.575 , 0.290 )
E 3 ( 0.245 , 0.465 , 0.290 ) ( 0.250 , 0.570 , 0.180 ) ( 0.175 , 0.660 , 0.165 )
E 4 ( 0.390 , 0.340 , 0.270 ) (0.305, 0.475, 0.220) ( 0.465 , 0.485 , 0.050 )
Table 4. Ranking results by the single-valued neutrosophic weighted power Heronian aggregation (SVNWPHA) operator under different values of p and q .
Table 4. Ranking results by the single-valued neutrosophic weighted power Heronian aggregation (SVNWPHA) operator under different values of p and q .
p , q s ( x i ) ( i = 1 , 2 , 3 , 4 ) Rank
p = q = 1 2 s ( φ 1 ) = 0.49506, s ( φ 2 ) = 0.52439
s ( φ 3 ) = 0.53074, s ( φ 4 ) = 0.59130
E 4 E 3 E 2 E 1
p = 1 2 , q = 0 s ( φ 1 ) = 0.49015, s ( φ 2 ) = 0.54500
s ( φ 3 ) = 0.55601, s ( φ 4 ) = 0.60136
E 4 E 3 E 2 E 1
p = 0 , q = 1 2 s ( φ 1 ) = 0.51363, s ( φ 2 ) = 0.48627
s ( φ 3 ) = 0.51719, s ( φ 4 ) = 0.61253
E 4 E 3 E 1 E 2
p = 1 , q = 0 s ( φ 1 ) = 0.49524, s ( φ 2 ) = 0.54099
s ( φ 3 ) = 0.55930, s ( φ 4 ) = 0.60495
E 4 E 3 E 2 E 1
p = 0 , q = 1 s ( φ 1 ) = 0.51856, s ( φ 2 ) = 0.47906
s ( φ 3 ) = 0.52142, s ( φ 4 ) = 0.61686
E 4 E 3 E 1 E 2
p = q = 1 s ( φ 1 ) = 0.50181, s ( φ 2 ) = 0.52414
s ( φ 3 ) = 0.53687, s ( φ 4 ) = 0.59759
E 4 E 3 E 2 E 1
p = 2 , q = 1 s ( φ 1 ) = 0.50761, s ( φ 2 ) = 0.51412
s ( φ 3 ) = 0.55005, s ( φ 4 ) = 0.60531
E 4 E 3 E 2 E 1
p = 1 , q = 2 s ( φ 1 ) = 0.51402, s ( φ 2 ) = 0.49559
s ( φ 3 ) = 0.53910, s ( φ 4 ) = 0.60724
E 4 E 3 E 2 E 1
p = q = 2 s ( φ 1 ) = 0.51657, s ( φ 2 ) = 0.49761
s ( φ 3 ) = 0.54928, s ( φ 4 ) = 0.61044
E 4 E 3 E 2 E 1
p = 1 , q = 5 s ( φ 1 ) = 0.54700, s ( φ 2 ) = 0.45546
s ( φ 3 ) = 0.55995, s ( φ 4 ) = 0.63528
E 4 E 3 E 2 E 1
p = 5 , q = 1 s ( φ 1 ) = 0.53347, s ( φ 2 ) = 0.49032
s ( φ 3 ) = 0.57562, s ( φ 4 ) = 0.62919
E 4 E 3 E 2 E 1
p = q = 5 s ( φ 1 ) = 0.55657, s ( φ 2 ) = 0.57806
s ( φ 3 ) = 0.57887, s ( φ 4 ) = 0.64230
E 4 E 3 E 2 E 1
p = q = 10 s ( φ 1 ) = 0.59847, s ( φ 2 ) = 0.62051
s ( φ 3 ) = 0.60646, s ( φ 4 ) = 0.67307
E 4 E 3 E 2 E 1
Table 5. Ranking results by the SVNWGPHA operator under different values of the p and q
Table 5. Ranking results by the SVNWGPHA operator under different values of the p and q
p , q s ( x i ) ( i = 1 , 2 , 3 , 4 ) Rank
p = q = 1 2 1 s ( φ 1 ) = 0.50276, s ( φ 2 ) = 0.51780
s ( φ 3 ) = 0.53938, s ( φ 4 ) = 0.59863
E 4 E 3 E 2 E 1
p = 1 2 , q = 0 s ( φ 1 ) = 0.49486, s ( φ 2 ) = 0.54943
s ( φ 3 ) = 0.56159, s ( φ 4 ) = 0.59670
E 4 E 3 E 2 E 1
p = 0 , q = 1 2 s ( φ 1 ) = 0.50025, s ( φ 2 ) = 0.50114
s ( φ 3 ) = 0.50270, s ( φ 4 ) = 0.60233
E 4 E 3 E 2 E 1
p = 1 , q = 0 s ( φ 1 ) = 0.49240, s ( φ 2 ) = 0.55310
s ( φ 3 ) = 0.55714, s ( φ 4 ) = 0.59381
E 4 E 3 E 2 E 1
p = 0 , q = 1 s ( φ 1 ) = 0.49698, s ( φ 2 ) = 0.50524
s ( φ 3 ) = 0.49852, s ( φ 4 ) = 0.59670
E 4 E 2 E 3 E 1
p = q = 1 s ( φ 1 ) = 0.49811, s ( φ 2 ) = 0.52414
s ( φ 3 ) = 0.53251, s ( φ 4 ) = 0.59198
E 4 E 3 E 2 E 1
p = 2 , q = 1 s ( φ 1 ) = 0.49175, s ( φ 2 ) = 0.54053
s ( φ 3 ) = 0.53188, s ( φ 4 ) = 0.58625
E 4 E 2 E 3 E 1
p = 1 , q = 2 s ( φ 1 ) = 0.49235, s ( φ 2 ) = 0.52494
s ( φ 3 ) = 0. 51525, s ( φ 4 ) = 0.58324
E 4 E 2 E 3 E 1
p = q = 2 s ( φ 1 ) = 0.48828, s ( φ 2 ) = 0.53810
s ( φ 3 ) = 0.51795, s ( φ 4 ) = 0.57959
E 4 E 2 E 3 E 1
p = 1 , q = 5 s ( φ 1 ) = 0.47267, s ( φ 2 ) = 0.45546
s ( φ 3 ) = 0.48019, s ( φ 4 ) = 0.56004
E 4 E 3 E 2 E 1
p = 5 , q = 1 s ( φ 1 ) = 0.47392, s ( φ 2 ) = 0.49032
s ( φ 3 ) = 0.51153, s ( φ 4 ) = 0.57101
E 4 E 3 E 2 E 1
p = q = 5 s ( φ 1 ) = 0.46401, s ( φ 2 ) = 0.45504
s ( φ 3 ) = 0.48164, s ( φ 4 ) = 0.55471
E 4 E 3 E 1 E 2
p = q = 10 s ( φ 1 ) = 0.43931, s ( φ 2 ) = 0.41810
s ( φ 3 ) = 0.44617, s ( φ 4 ) = 0.5331
E 4 E 3 E 1 E 2
Table 6. The ranking results produced by the different methods.
Table 6. The ranking results produced by the different methods.
Method Score function s ( x i ) ( i = 1 , 2 , 3 , 4 ) Ranking
Method proposed by Li, Liu and Chen [33]
( p = q = 1 )
s ( φ 1 ) = 0.417, s ( φ 2 ) = 0.468
s ( φ 3 ) = 0.496, s ( φ 4 ) = 0.665
E 4 E 3 E 2 E 1
Method proposed by Yang and Li [34] s ( φ 1 ) = 0.43769, s ( φ 2 ) = 0.50444
s ( φ 3 ) = 0.51456, s ( φ 4 ) = 0.67933
E 4 E 3 E 2 E 1
Method proposed by Ye [31] s ( φ 1 ) = 0.42237, s ( φ 2 ) = 0.46408
s ( φ 3 ) = 0.49441, s ( φ 4 ) = 0.66230
E 4 E 3 E 2 E 1
The proposed method in this paper ( p = q = 1 )
SVNWPHA operator s ( φ 1 ) = 0.50181, s ( φ 2 ) = 0.52414
s ( φ 3 ) = 0.53687, s ( φ 4 ) = 0.59759
E 4 E 3 E 2 E 1
SVNWGPHA operator s ( φ 1 ) = 0.49811, s ( φ 2 ) = 0.52414
s ( φ 3 ) = 0.53251, s ( φ 4 ) = 0.59198
E 4 E 3 E 2 E 1
Table 7. A comparison of the properties for different operators.
Table 7. A comparison of the properties for different operators.
OperatorsSNSWAASVNPWANNIGWHMSVNWPHA SVNWGPHA
Properties
Consider the interrelationship of the aggregated argumentsNoNoYesYes
Consider the suppose degree between the input argumentsNoYesNoYes
parametersNoNoYesYes
Table 8. The ranking results compared with Li, Liu and Chen [33] method ( p = q = 1 ).
Table 8. The ranking results compared with Li, Liu and Chen [33] method ( p = q = 1 ).
Method Score function s ( x i ) ( i = 1 , 2 , 3 , 4 ) Ranking
Method proposed by Li, Liu and Chen [33] s ( φ 1 ) = 0.417, s ( φ 2 ) = 0.468
s ( φ 3 ) = 0.456, s ( φ 4 ) = 0.665
E 4 E 2 E 3 E 1
The proposed method with SVNWPHA operator s ( φ 1 ) = 0.50181, s ( φ 2 ) = 0.52414
s ( φ 3 ) = 0.53540, s ( φ 4 ) = 0.59759
E 4 E 3 E 2 E 1

Share and Cite

MDPI and ACS Style

Zhao, S.; Wang, D.; Liang, C.; Leng, Y.; Xu, J. Some Single-Valued Neutrosophic Power Heronian Aggregation Operators and Their Application to Multiple-Attribute Group Decision-Making. Symmetry 2019, 11, 653. https://doi.org/10.3390/sym11050653

AMA Style

Zhao S, Wang D, Liang C, Leng Y, Xu J. Some Single-Valued Neutrosophic Power Heronian Aggregation Operators and Their Application to Multiple-Attribute Group Decision-Making. Symmetry. 2019; 11(5):653. https://doi.org/10.3390/sym11050653

Chicago/Turabian Style

Zhao, Shuping, Dong Wang, Changyong Liang, Yajun Leng, and Jian Xu. 2019. "Some Single-Valued Neutrosophic Power Heronian Aggregation Operators and Their Application to Multiple-Attribute Group Decision-Making" Symmetry 11, no. 5: 653. https://doi.org/10.3390/sym11050653

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop