Next Article in Journal
Potential Development of N-Doped Carbon Dots and Metal-Oxide Carbon Dot Composites for Chemical and Biosensing
Previous Article in Journal
Effect of Graphene Sheets Embedded Carbon Films on the Fretting Wear Behaviors of Orthodontic Archwire–Bracket Contacts
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Nanomaterials
Volume 12
Issue 19
10.3390/nano12193432
nanomaterials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Optimizing Plasmonic Gold Nanorod Deposition on Glass Surfaces for High-Sensitivity Refractometric Biosensing

by
Youngkyu Hwang
1,†,
Dong Jun Koo
1,†,
Abdul Rahim Ferhan
2,
Tun Naw Sut
1,
Bo Kyeong Yoon
3,
Nam-Joon Cho
2,* and
Joshua A. Jackman
1,*
1
School of Chemical Engineering and Translational Nanobioscience Research Center, Sungkyunkwan University, Suwon 16419, Korea
2
School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore
3
School of Healthcare and Biomedical Engineering, Chonnam National University, Yeosu 59626, Korea
*
Authors to whom correspondence should be addressed.
†
These authors contributed equally to this work.
Nanomaterials 2022, 12(19), 3432; https://doi.org/10.3390/nano12193432
Submission received: 29 July 2022 / Revised: 13 September 2022 / Accepted: 17 September 2022 / Published: 30 September 2022
Browse Figures
Versions Notes

Abstract

:
Owing to high surface sensitivity, gold nanorods (AuNRs) are widely used to construct surface-based nanoplasmonic biosensing platforms for label-free molecular diagnostic applications. A key fabrication step involves controlling AuNR deposition onto the target surface, which requires maximizing surface density while minimizing inter-particle aggregation, and is often achieved by surface functionalization with a self-assembled monolayer (SAM) prior to AuNR deposition. To date, existing studies have typically used a fixed concentration of SAM-forming organic molecules (0.2−10% v/v) while understanding how SAM density affects AuNR deposition and resulting sensing performance would be advantageous. Herein, we systematically investigated how controlling the (3-aminopropyl)triethoxysilane (APTES) concentration (1–30% v/v) during SAM preparation affects the fabrication of AuNR-coated glass surfaces for nanoplasmonic biosensing applications. Using scanning electron microscopy (SEM) and UV-visible spectroscopy, we identified an intermediate APTES concentration range that yielded the highest density of individually deposited AuNRs with minimal aggregation and also the highest peak wavelength in aqueous solution. Bulk refractive index sensitivity measurements indicated that the AuNR configuration had a strong effect on the sensing performance, and the corresponding wavelength-shift responses ranged from 125 to 290 nm per refractive index unit (RIU) depending on the APTES concentration used. Biosensing experiments involving protein detection and antigen–antibody interactions further demonstrated the high surface sensitivity of the optimized AuNR platform, especially in the low protein concentration range where the measurement shift was ~8-fold higher than that obtained with previously used sensing platforms.

1. Introduction

The interaction of light with plasmonic gold nanostructures such as nanoparticles, nanorods, nanodisks, and nanoislands can induce a wide range of optical phenomena stemming from the coherent oscillation of conduction-band electrons near the metal surface [1,2,3,4,5,6,7,8,9]. Among the different phenomena, localized surface plasmon resonance (LSPR) is one of the most promising ones for bioanalytical sensing applications and relates to a highly enhanced electromagnetic field near the sensing interface, which can be highly sensitive to changes in the local refractive index (e.g., due to contacting bio-analytes) [5,10,11,12,13,14,15]. Accordingly, the design of the nanostructure interface is critical to sensing performance and there are various methods to fabricate gold nanostructures on a solid surface. For example, lithographic methods (i.e., electron-beam lithography, focused ion beam lithography, and soft lithography) and coating methods based on chemical modification and templating (i.e., self-assembled monolayers and block copolymers) are among the possible options [16,17,18,19,20,21,22,23,24,25,26]. The latter case of depositing solution-phase gold nanostructures with defined size, shape, and composition onto a functionalized surface is particularly advantageous when considering the feasibility for mass production, low energy consumption, and high process efficiency [27,28,29,30].
Among different nanostructure types, gold nanorods (AuNRs) have received extensive attention due to unique optical properties that arise from their asymmetrical structure [26,31,32,33,34]. Specifically, AuNRs have two light absorption bands that are parallel and perpendicular to the long rod axis and are referred to as the transverse LSPR (t-LSPR, ~520 nm) and longitudinal LSPR (l-LSPR, ~650–1350 nm) peaks, respectively. The l-LSPR peak is known to have particularly high sensitivity to changes in the surrounding dielectric environment and this sensitivity typically becomes higher as the AuNR aspect ratio increases, which can be readily controlled using solution-phase synthesis. Hence, the controlled deposition of AuNRs on solid surfaces is an emerging strategy to develop plasmonic biosensors for label-free measurements [5,35,36,37,38].
To immobilize AuNRs on a surface, diverse material engineering strategies, including templates, oxygen plasma treatment, and self-assembled monolayers (SAMs), have been utilized to create nanostructured arrays for surface-enhanced Raman spectroscopy and metal-enhanced fluorescence applications [11,39,40,41]. In the case of SAM treatment, the first step involves the preparation of a SAM-functionalized surface using organic molecules that possess amino or thiol groups, for example, followed by deposition of AuNRs onto the functionalized surface. Depending on the specific protocol of the SAM coating step, there can be variations in the surface coverage and density of SAM molecules that impact resulting AuNR organization and density, which can in turn affect the plasmonic sensing performance as well. Interestingly, until now, the relevant studies [42,43,44,45,46,47,48,49,50] have used various concentrations of SAM-forming organic molecules (typically 0.2–10% v/v) and incubation times to prepare the SAM-functionalized surface, while it would be advantageous to investigate how optimizing the SAM functionalization step can modulate AuNR deposition and in turn influence refractometric biosensing performance (Table S1). The latter aspect is especially important not only in terms of bulk refractive index sensitivity, but also in terms of molecular surface sensitivity and highlights how a nanoarchitectonics design approach can be useful to improve the sensing performance of deposited AuNR arrays for biosensing applications.
Towards this goal, herein, we investigated how controlling AuNR organization and density on a SAM-functionalized glass surface influences plasmonic biosensing performance in terms of maximizing bulk refractive index sensitivity and detection sensitivity for tracking noncovalent protein adsorption and multistep antibody–antigen interactions. Central to our approach was the use of (3-aminopropyl)triethoxysilane (APTES), which is an organosilane molecule with an amino terminal group, that was used to form the SAM-functionalized glass surface, and the APTES concentration was systematically varied to modulate the AuNR distribution, density, and aggregation, all of which impact refractometric biosensing performance. Indeed, while achieving a high AuNR density is useful for improved sensitivity, it can also lead to AuNR aggregation that affects the plasmonic signal readout, and hence, optimizing the AuNR platform coating properties is important. Following this approach, we characterized the density and organization of deposited AuNRs using scanning electron microscopy (SEM), followed by spectroscopic characterization of the light extinction spectra and biosensing performance. Our findings provide insight into effective surface engineering, for example, optimizing SAM treatment conditions for AuNR deposition that can boost plasmonic sensing performance and can be broadly applicable to plasmonic nanostructures in general. Specifically, our study provides the first systematic investigation unravelling how AuNR surface density and attachment-related nanorod aggregation influence nanoplasmonic sensing properties in terms of bulk refractive index sensitivity and molecular surface sensitivity, whereby optimizing the APTES concentration based on the insights obtained in this study significantly improved both of these sensing parameters.

2. Materials and Methods

2.1. Fabrication of AuNR-Coated Glass Substrate

Glass substrates (FisherbrandTM SuperfrostTM Plus, Thermo Fisher Scientific, Waltham, MA, USA) were cleaned with deionized water (MilliporeSigma, Burlington, MA, USA), and treated with oxygen plasma for 5 min by using a CUTE-1MPR machine (Femto Science Inc., Hwaseong, Korea). The samples were incubated in an ethanolic solution containing different concentrations (1–30% v/v) of (3-aminopropyl)triethoxysilane (APTES) (MilliporeSigma, Burlington, MA, USA) for 30 min under shaking at 50 rpm and left for 30 min without shaking. After APTES incubation, they were rinsed with ethanol, followed by blowing with N2 gas and then baked in an oven at 110 °C for 60 min. Next, the samples were incubated in an AuNR solution (Sigma-Aldrich, St. Louis, MO, USA; 40 µg/mL, dimensions: 10 nm × 37 nm) in a dark environment for 24 h. After the coating process, the samples were gently washed with deionized water and dried with N2 gas.

2.2. Substrate Characterization

SEM images were obtained using a JSM-7600F Schottky field-emission scanning electron microscope (JEOL, Tokyo, Japan). The number density of deposited AuNRs in the SEM images was analyzed by ImageJ software (National Institutes of Health, Bethesda, MD, USA). Optical extinction spectra were recorded using a microplate reader (SpectraMax iD5, Molecular Devices, San Jose, CA, USA). Bulk refractive index sensitivity values were measured by incubating the AuNR-coated substrates in water–glycerol mixtures with increasing glycerol fractions (0–40% v/v). To measure the bulk RI sensitivity, the maximum intensity wavelength (Δλmax) was obtained as a function of the change in refractive index units (ΔRIU) for different water–glycerol mixtures and the slope (Δλmax/ΔRIU) was calculated by linear regression analysis [51].

2.3. Protein Detection Measurements

Samples with different concentrations (0.001–100 μM) of bovine serum albumin (BSA) protein (MilliporeSigma, Burlington, MA, USA) were prepared in 10 mM Tris buffer (150 mM NaCl, pH 7.5), were added to the AuNR-coated substrates for 30 min under shaking at 50 rpm and then washed three times with Tris buffer. The optical extinction spectrum was measured at each step by a microplate reader. A 500 μL aliquot of a 5 µg/mL recombinant COVID-19 nucleocapsid (N) antigen (catalog no. LIC-NP-04, Luca AICell, Inc., Anyang, Korea) in a carbonate coating buffer (50 mM, pH 9.6) was added to the AuNR-coated glass surface in the plate wells and incubated at 37 °C for 1 h. Then, the wells were washed 3 times with 1 mL of PBS with 0.05% Tween 20 (PBS-T). After washing, 1 mL volume of monoclonal primary antibody (clone 12D12, Luca AICell, Inc.) in PBS-T was incubated with the antigen-coated surface in the wells at 37 °C for 1 h, followed by washing 3 times with PBS-T. Then, 500 μL of the secondary antibody (1:20,000 dilution, Luca AICell, Inc.) in PBS-T was added to the surface in the wells and then incubated at 37 °C for 1 h. After washing 3 times with PBS-T, the optical extinction spectrum of the AuNR-coated surface after respective incubation steps with the antigen, primary and second antibody, were measured by using a microplate reader. All measurements were conducted at room temperature (~24 °C). In applicable cases, additional morphological characterization was performed by atomic force microscopy (AFM) experiments with a JPK NanoWizard Ultra Speed instrument operated in non-contact mode (Bruker Nano GmbH, Berlin, Germany). In addition, Fourier transform infrared spectroscopy (FTIR) experiments were conducted using an FT-IR 4700 spectrometer (JASCO, Tokyo, Japan) with an attenuated total reflectance (ATR) accessory module. Sample spectra were obtained between 4000 and 650 cm–1 with 32-times scanning per measurement by using single-reflection ATR mode (incident light angle: 45°). Background spectra collected prior to sample readings were subtracted from sample spectra, and a baseline correction process was also performed.

3. Results

We begin by introducing the key design objectives to consider when fabricating APTES-functionalized surfaces based on the deposition of solution-phase nanostructures such as AuNRs. Figure 1A presents the major issues to consider when deposited AuNRs have different surface coverages. At low coverage, the AuNRs are well-separated, but the low density can decrease plasmonic signal intensity. On the other hand, at high coverage, there can be AuNR aggregation and the resulting inter-particle coupling effects can cause distortions in the plasmonic signal readout, especially for refractometric biosensing applications. To address this issue, we prepared APTES-functionalized glass surfaces using different APTES concentrations (1–30% v/v, positive charge) and citrated AuNRs (negative charge) were attached to the APTES moieties via electrostatic attraction (Figure 1B and Figure S1). We hypothesized that controlling the APTES coating conditions would in turn affect the surface coverage of deposited AuNRs and performed various plasmonic biosensing experiments to identify optimal platform conditions.
Briefly, the coating process started with washing a glass substrate with acetone and deionized (DI) water under sonication for 5 min and then blowing the surface using a N2 gas stream to remove residual DI water. After O2 plasma treatment for 5 min to generate hydroxyl groups on the glass surface, various concentrations of ethanolic APTES solution were incubated with the substrate under orbital shaking for 30 min and then left for 30 min without shaking. After washing the samples with ethanol followed by treatment with a N2 gas stream, the samples were incubated in an oven at 110 °C for 60 min.
The APTES-functionalized glass surface was incubated with AuNRs in DI water (250 µL, density: 35 µg/mL, length: 37 ± 7 nm, diameter: 10 ± 2 nm) under orbital shaking for 30 min and then left overnight (for 23.5 h) without shaking, followed by rinsing with aqueous solution to remove weakly attached AuNRs.
To confirm the effect of APTES concentration on AuNR attachment density, we characterized the fabricated AuNR arrays by SEM imaging (Figure 2A–E). The number density of AuNRs on the surface noticeably increased as the APTES concentration used was increased up to 10%. For the 1%, 5%, and 10% APTES cases, the AuNR surface density was 4.0 ± 0.2 µm−2, 9.0 ± 0.4 µm−2, and 11.9 ± 0.5 µm−2, respectively (Figure 2F). On the other hand, for the 20% and 30% APTES cases, there was no significant increase in the AuNR number density compared to the 10% APTES case. In all cases, there was still a relatively low surface density of attached AuNRs, which is suitable for LSPR-based sensing applications where it is ideal to minimize inter-particle coupling [51,52].
In addition to total number density, we also analyzed the SEM images at higher magnification to investigate how the APTES concentration used during the coating step in turn affected the aggregation state of deposited AuNRs on the functionalized glass surface (Figure 2G). We classified the deposited AuNRs in terms of three aggregation states: Type A consisted of individual AuNRs; Type B consisted of two AuNRs joined together; and Type C consisted of three or more AuNRs joined together. The surface density of AuNRs (nanorods per µm) in the Type A configuration ranged from 3.2 ± 0.2 µm−2 in the 1% APTES case to 8.8 ± 0.2 µm−2 in the 10% APTES case, and similarly high values in the 20% and 30% APTES cases indicate that saturation was reached (Figure 2H). On the other hand, the surface density of AuNRs in the Type B and C configurations also tended to increase at higher APTES concentrations and hence the use of 10–20% APTES concentration for substrate fabrication appeared to be optimal in terms of maximizing the surface density of isolated AuNRs while minimizing the presence of AuNR aggregates.
We proceeded to characterize the plasmonic properties of the AuNR platforms by measuring the optical extinction spectra (Figure 2I). As the APTES concentration used was varied from 1% to 20%, the highest-intensity peak wavelength in the extinction spectrum showed a red shift from 729 nm to 750 nm, which is associated with an increase in the surface density of individual AuNRs and a corresponding decrease in inter-particle gap distance. On the other hand, for the 30% APTES case, a blue shift occurred that is related to randomly arranged AuNR aggregates with decreased anisotropy and hence lower sensitivity [31,53,54,55,56,57,58].
We also performed refractive index (RI) sensitivity measurements on the different AuNR platforms by tracking the change in the l-LSPR peak wavelength (Δλmax) in the presence of different water–glycerol mixtures (0–40%, in 10% increments). This measurement approach is well-established for calibration and for determining the bulk RI sensitivity value, which is an important sensing performance metric [59]. With increasing glycerol fraction, the mixtures had larger refractive index unit (RIU) values and the first measurement step was done in water, before exchanging the bulk solution with mixtures that contained increasingly larger glycerol fractions. Based on this approach, the Δλmax shift per ΔRIU shift was calculated from linear slope analysis and is defined as the bulk RI sensitivity value. In the 1% and 5% APTES cases, the AuNR-coated glass substrates had low bulk RI sensitivities of around 124.6 ± 39.0 and 161.5 ± 18.5 nm/RIU, respectively (Figure 3A,B). Of note, there was also relatively weak extinction intensity due to the low surface density of AuNRs on the substrate and poor linearity in the signal response.
On the other hand, in the 10% and 20% APTES cases, there was much higher measurement sensitivity and the bulk RI sensitivity values in those cases were 289.5 ± 14.5 and 290.3 ± 22.5 nm/RIU, respectively, with good linearity (Figure 3C,D). By contrast, in the 30% APTES case, the bulk RI sensitivity decreased to 256.0 ± 10.7 nm/RIU and there was lower extinction intensity due to greater presence of AuNR aggregates (Figure 3E). Based on these results, 10–20% APTES was identified to be a suitable range for preparing highly sensitive AuNR platforms and we selected AuNR platforms prepared using 20% APTES concentration for further biosensing evaluation (Figure 3F). Selection of this particular AuNR platform was further reinforced by verifying its stability since there were negligible changes in the corresponding optical extinction spectrum upon extensive washing (for each cycle, three-times rinsing with water followed by nitrogen gas drying) (Figure S2).
In addition to bulk refractive index sensitivity, another key parameter is the molecular sensitivity to detect biomacromolecular interactions related to changes in the local refractive index near the sensor surface. This molecular sensitivity can be evaluated by using different-sized protein molecules, which can adsorb onto the sensor surface and form a thin-film adsorbate to measure corresponding measurement responses that relate to the LSPR probing volume, i.e., degree of surface sensitivity [60,61]. First, we measured the noncovalent adsorption of bovine serum albumin (BSA) protein onto the surface and observed a peak shift increase due to protein adsorption (Figure 4A). Quantitatively, the Δλmax shift increased from 1.2 ± 0.2 nm for 0.001 μM BSA concentration to 8.7 ± 1.4 nm and 8.7 ± 0.9 nm for 0.01 μM and 0.1 μM BSA concentrations, respectively (Figure 4B). While most related studies have investigated BSA protein detection at ~10–100 μM concentrations, noteworthy points of these results are that similarly large measurement responses were recorded at appreciably lower concentrations using our platform and that the measurement response saturates at relatively low protein concentration in our case. These points emphasize that our sensing platform is particularly well suited for detecting protein analytes at very low concentrations, which could relate to protein–nanorod interactions and resulting protein conformational changes [62]. BSA adsorption to the AuNR platform was further characterized by atomic force microscopy (AFM) imaging, which indicated that the maximum height features increased from ~10 nm to ~15 nm due to BSA attachment (BSA molecules have typical height of ~5 nm) and the root-mean-square surface roughness of the surface also increased from 1.005 nm to 1.431 nm after BSA attachment [63,64,65]. In addition, Fourier transform infrared spectroscopy (FTIR) experiments verified BSA attachment, as indicated by a strong peak at 1654 cm−1 that corresponded to the amide I band of BSA protein molecules [66] (Figures S3 and S4).
Aside from BSA adsorption, we also measured the attachment of coronavirus disease-2019 (COVID-19) nucleocapsid (N) protein antigen and antibodies to the AuNR platform. In this case, the N antigen was initially added, and its adsorption onto the sensor surface resulted in a large Δλmax shift of around 68.0 ± 1.8 nm (Figure 4C,D). On the other hand, after antigen attachment, subsequent addition of primary and secondary antibodies only led to Δλmax shifts of around ~1.3 nm and ~2.5 nm, respectively, which is consistent with the large molecular size of these protein analytes (>100 kDa), the sensor surface being occupied by already-attached antigen molecules, and the short decay length of the LSPR-enhanced electromagnetic fields (~5–10 nm) when plasmonic nanoparticles are well separated and there is a low degree of inter-particle plasmon coupling [60,67]. In conjunction with the microplate reader, we further estimated that the sensor resolution was on the order of 3 × 10−3 RIU (3 × standard deviation of the Δλmax baseline signal) while the AuNR platform can be readily integrated with dedicated UV-vis spectrophotometers to reach on the order of 10-5–10-6 RIU [68].
To contextualize these biosensing performance results, the reported LSPR-related peak shifts for BSA adsorption onto various plasmonic gold nanostructures are presented in Figure 5.
While most studies have focused on relatively high BSA concentrations (>0.1 µM), our study demonstrates that AuNRs have strong merits for detecting protein analytes at lower concentrations as well. Within the low concentration regime (<0.1 µM), our AuNR platform demonstrated an ~8-times larger measurement response compared to other plasmonic nanostructures. Notably, a quite small measurement response of ~0.3 nm was recorded for 0.03 µM BSA to polymer-coated AuNRs [69], whereas the bare AuNR platform in this study had an ~8-nm peak shift for 0.01 µM BSA.
It should also be remarked that our study focused on the APTES-mediated attachment of AuNRs onto a functionalized glass surface, which results in a quasi-two-dimensional (2D) arrangement of AuNRs on the surface. This approach led us to determine that the nanoplasmonic sensing performance of this particular AuNR platform with a specific nanoparticle shape could be optimized by maximizing the surface density of attached AuNRs while minimizing the presence of AuNR aggregates on the surface, yielding an over ~2-fold improvement in bulk refractive index sensitivity up to 290 nm/RIU. Other AuNR platforms utilizing AuNRs with different shapes, i.e., larger major axes (which is known to be related to sensing performance; see Refs. [78,79]), have reported higher bulk refractive index sensitivities in excess of 400 nm/RIU, and it is anticipated that the general design principles identified in our study could be applied to those other AuNR platforms as well [80]. In addition, the development of three-dimensional (3D) arrangements of AuNRs embedded within soft-matter assemblies such as thin-film polyelectrolyte complexes might also consider these design principles in order to boost sensing performance [81].

4. Conclusions

In this study, we have systematically investigated the design and fabrication of AuNR-coated glass surfaces by varying the APTES concentration that was used to functionalize the glass surface prior to AuNR deposition. While the basic fabrication strategy is long established, there has been a wide range of APTES concentrations (0.2–10% v/v) used to functionalize the glass surface in prior studies, and our findings indicate that controlling this parameter can strongly influence the AuNR platform architecture in terms of surface density and particle aggregation, and resulting sensing properties. An intermediate APTES concentration in the range of 10–20% v/v was identified to be optimal for maximizing AuNR surface density, minimizing aggregation, and contributing to a high peak wavelength in aqueous solution. Notably, the bulk refractive index sensitivity of the AuNR platforms varied from 125 to 290 nm/RIU depending on the APTES concentration used during fabrication and was correlated with the nanoarchitecture properties of the deposited AuNRs. Together with the demonstrated high sensitivity to detect protein analytes, these results highlight how optimizing AuNR deposition can boost nanoplasmonic sensing performance based on a simple yet effective interfacial science strategy to maximize the density of individual AuNRs while minimizing aggregation, and such possibilities are potentially extendable to other types of biosensing devices such as liquid crystal sensors [82,83].

Supplementary Materials

The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/nano12193432/s1, Table S1. Comparison of gold nanostructure coating conditions in relevant studies, including APTES concentration, solvent, and incubation time; Figure S1: Photographs of AuNR platforms on APTES-coated glass surfaces depending on the APTES concentration that was used during fabrication; Figure S2: Optical extinction spectra of deposited AuNRs on a glass substrate after repeated washing cycles; Figure S3: Surface morphology of AuNR platform; Figure S4: FTIR spectroscopic analysis of glass surface without and with BSA protein coating and AuNR-coated glass surface without and with BSA protein coating. References [45,77,84,85,86,87,88,89,90,91,92,93,94] are cited in the Supplementary Materials.

Author Contributions

Conceptualization, Y.H. and J.A.J.; methodology, Y.H. and D.J.K.; formal analysis, Y.H. and D.J.K.; investigation, Y.H., D.J.K. and T.N.S.; resources, B.K.Y.; data curation, A.R.F., T.N.S. and B.K.Y.; writing—original draft preparation, Y.H.; writing—review and editing, A.R.F., B.K.Y. and J.A.J.; visualization, D.J.K.; supervision, N.-J.C. and J.A.J.; funding acquisition, Y.H. and J.A.J. All authors have read and agreed to the published version of the manuscript.

Funding

This work was supported by the SKKU Research Fellowship Program of Sungkyunkwan University, 2022 and by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (2021R1I1A1A01056302).

Data Availability Statement

Data are available from the authors upon request.

Acknowledgments

Y.H. and D.J.K. contributed equally to this work.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Lassiter, J.B.; Knight, M.W.; Mirin, N.A.; Halas, N.J. Reshaping the plasmonic properties of an individual nanoparticle. Nano Lett. 2009, 9, 4326–4332. [Google Scholar] [CrossRef] [PubMed]
  2. Ney, A.; Pampuch, C.; Koch, R.; Ploog, K.H. Programmable computing with a single magnetoresistive element. Nature 2003, 425, 485–487. [Google Scholar] [CrossRef]
  3. Tang, Z.; Wu, J.; Yu, X.; Hong, R.; Zu, X.; Lin, X.; Luo, H.; Lin, W.; Yi, G. Fabrication of Au nanoparticle arrays on flexible substrate for tunable localized surface plasmon resonance. ACS Appl. Mater. Interfaces 2021, 13, 9281–9288. [Google Scholar] [CrossRef]
  4. Pavelka, O.; Dyakov, S.; Vesely, J.; Fucikova, A.; Sugimoto, H.; Fujii, M.; Valenta, J. Optimizing plasmon enhanced luminescence in silicon nanocrystals by gold nanorods. Nanoscale 2021, 13, 5045–5057. [Google Scholar] [CrossRef] [PubMed]
  5. Liang, C.; Luan, J.; Wang, Z.; Jiang, Q.; Gupta, R.; Cao, S.; Liu, K.K.; Morrissey, J.J.; Kharasch, E.D.; Naik, R.R.; et al. Gold Nanorod Size-Dependent Fluorescence Enhancement for Ultrasensitive Fluoroimmunoassays. ACS Appl. Mater. Interfaces 2021, 13, 11414–11423. [Google Scholar] [CrossRef] [PubMed]
  6. Zoric, I.; Zach, M.; Kasemo, B.; Langhammer, C. Gold, platinum, and aluminum nanodisk plasmons: Material independence, subradiance, and damping mechanisms. ACS Nano 2011, 5, 2535–2546. [Google Scholar] [CrossRef] [PubMed]
  7. Manjavacas, A.; Garcia de Abajo, F.J. Tunable plasmons in atomically thin gold nanodisks. Nat. Commun. 2014, 5, 3548. [Google Scholar] [CrossRef]
  8. Kedem, O.; Tesler, A.B.; Vaskevich, A.; Rubinstein, I. Sensitivity and optimization of localized surface plasmon resonance transducers. ACS Nano 2011, 5, 748–760. [Google Scholar] [CrossRef]
  9. Hwang, Y.; Ferhan, A.R.; Yoon, B.K.; Sut, T.N.; Jeon, W.-Y.; Koo, D.J.; Jackman, J.A.; Cho, N.-J. Surface engineering of plasmonic gold nanoisland platforms for high-sensitivity refractometric biosensing applications. Appl. Mater. Today 2022, 26, 101280. [Google Scholar] [CrossRef]
  10. Masterson, A.N.; Muhoberac, B.B.; Gopinadhan, A.; Wilde, D.J.; Deiss, F.T.; John, C.C.; Sardar, R. Multiplexed and high-throughput label-free detection of RNA/spike protein/IgG/IgM biomarkers of SARS-CoV-2 infection utilizing nanoplasmonic biosensors. Anal. Chem. 2021, 93, 8754–8763. [Google Scholar] [CrossRef]
  11. Abadeer, N.S.; Fulop, G.; Chen, S.; Kall, M.; Murphy, C.J. Interactions of bacterial lipopolysaccharides with gold nanorod surfaces investigated by refractometric sensing. ACS Appl. Mater. Interfaces 2015, 7, 24915–24925. [Google Scholar] [CrossRef] [PubMed]
  12. Jose, J.; Jordan, L.R.; Johnson, T.W.; Lee, S.H.; Wittenberg, N.J.; Oh, S.H. Topographically flat substrates with embedded nanoplasmonic devices for biosensing. Adv. Funct. Mater. 2013, 23, 2812–2820. [Google Scholar] [CrossRef]
  13. Dondapati, S.K.; Sau, T.K.; Hrelescu, C.; Klar, T.A.; Stefani, F.D.; Feldmann, J. Label-free biosensing based on single gold nanostars as plasmonic transducers. Acs Nano 2010, 4, 6318–6322. [Google Scholar] [CrossRef] [PubMed]
  14. Mayer, K.M.; Lee, S.; Liao, H.; Rostro, B.C.; Fuentes, A.; Scully, P.T.; Nehl, C.L.; Hafner, J.H. A label-free immunoassay based upon localized surface plasmon resonance of gold nanorods. Acs Nano 2008, 2, 687–692. [Google Scholar] [CrossRef] [PubMed]
  15. Lu, G.; Li, H.; Zhang, H. Nanoparticle-coated PDMS elastomers for enhancement of Raman scattering. Chem. Commun. 2011, 47, 8560–8562. [Google Scholar] [CrossRef]
  16. Hoflich, K.; Yang, R.B.; Berger, A.; Leuchs, G.; Christiansen, S. The direct writing of plasmonic gold nanostructures by electron-beam-induced deposition. Adv. Mater. 2011, 23, 2657–2661. [Google Scholar] [CrossRef]
  17. Huang, W.; Qian, W.; Jain, P.K.; El-Sayed, M.A. The effect of plasmon field on the coherent lattice phonon oscillation in electron-beam fabricated gold nanoparticle pairs. Nano Lett. 2007, 7, 3227–3234. [Google Scholar] [CrossRef]
  18. Chen, Y.; Bi, K.; Wang, Q.; Zheng, M.; Liu, Q.; Han, Y.; Yang, J.; Chang, S.; Zhang, G.; Duan, H. Rapid focused ion beam milling based fabrication of plasmonic nanoparticles and assemblies via “sketch and peel” strategy. ACS Nano 2016, 10, 11228–11236. [Google Scholar] [CrossRef]
  19. Semple, M.; Hryciw, A.C.; Li, P.; Flaim, E.; Iyer, A.K. Patterning of complex, nanometer-scale features in wide-area gold nanoplasmonic structures using helium focused ion beam milling. ACS Appl. Mater. Interfaces 2021, 13, 43209–43220. [Google Scholar] [CrossRef]
  20. Lee, M.H.; Huntington, M.D.; Zhou, W.; Yang, J.C.; Odom, T.W. Programmable soft lithography: Solvent-assisted nanoscale embossing. Nano Lett. 2011, 11, 311–315. [Google Scholar] [CrossRef]
  21. Gupta, V.; Probst, P.T.; Gossler, F.R.; Steiner, A.M.; Schubert, J.; Brasse, Y.; Konig, T.A.F.; Fery, A. Mechanotunable surface lattice resonances in the visible optical range by soft lithography templates and directed self-assembly. ACS Appl. Mater. Interfaces 2019, 11, 28189–28196. [Google Scholar] [CrossRef] [PubMed]
  22. Mieszawska, A.J.; Slawinski, G.W.; Zamborini, F.P. Directing the growth of highly aligned gold nanorods through a surface chemical amidation reaction. J. Am. Chem. Soc. 2006, 128, 5622–5623. [Google Scholar] [CrossRef] [PubMed]
  23. Mistark, P.A.; Park, S.; Yalcin, S.E.; Lee, D.H.; Yavuzcetin, O.; Tuominen, M.T.; Russell, T.P.; Achermann, M. Block-copolymer-based plasmonic nanostructures. ACS Nano 2009, 3, 3987–3992. [Google Scholar] [CrossRef]
  24. Akinoglu, G.E.; Mir, S.H.; Gatensby, R.; Rydzek, G.; Mokarian-Tabari, P. Block copolymer derived vertically coupled plasmonic arrays for surface-enhanced Raman spectroscopy. ACS Appl. Mater. Interfaces 2020, 12, 23410–23416. [Google Scholar] [CrossRef]
  25. Vial, S.; Pastoriza-Santos, I.; Perez-Juste, J.; Liz-Marzan, L.M. Plasmon coupling in layer-by-layer assembled gold nanorod films. Langmuir 2007, 23, 4606–4611. [Google Scholar] [CrossRef]
  26. Lin, X.; Hasi, W.L.; Han, S.Q.; Lou, X.T.; Lin, D.Y.; Lu, Z.W. Fabrication of transparent SERS platform via interface self-assembly of gold nanorods and gel trapping technique for on-site real time detection. Phys. Chem. Chem. Phys. 2015, 17, 31324–31331. [Google Scholar] [CrossRef]
  27. Jia, H.; Fang, C.; Zhu, X.M.; Ruan, Q.; Wang, Y.X.; Wang, J. Synthesis of absorption-dominant small gold nanorods and their plasmonic properties. Langmuir 2015, 31, 7418–7426. [Google Scholar] [CrossRef]
  28. Lee, H.E.; Ahn, H.Y.; Mun, J.; Lee, Y.Y.; Kim, M.; Cho, N.H.; Chang, K.; Kim, W.S.; Rho, J.; Nam, K.T. Amino-acid- and peptide-directed synthesis of chiral plasmonic gold nanoparticles. Nature 2018, 556, 360–365. [Google Scholar] [CrossRef]
  29. Yang, P.; Zheng, J.; Xu, Y.; Zhang, Q.; Jiang, L. Colloidal synthesis and applications of plasmonic metal nanoparticles. Adv. Mater. 2016, 28, 10508–10517. [Google Scholar] [CrossRef]
  30. Nusz, G.J.; Curry, A.C.; Marinakos, S.M.; Wax, A.; Chilkoti, A. Rational selection of gold nanorod geometry for label-free plasmonic biosensors. ACS Nano 2009, 3, 795–806. [Google Scholar] [CrossRef]
  31. Biswas, S.; Duan, J.; Nepal, D.; Park, K.; Pachter, R.; Vaia, R.A. Plasmon-induced transparency in the visible region via self-assembled gold nanorod heterodimers. Nano Lett. 2013, 13, 6287–6291. [Google Scholar] [CrossRef] [PubMed]
  32. Ashkar, R.; Hore, M.J.A.; Ye, X.; Natarajan, B.; Greybush, N.J.; Lam, T.; Kagan, C.R.; Murray, C.B. Rapid large-scale assembly and pattern transfer of one-dimensional gold nanorod superstructures. ACS Appl. Mater. Interfaces 2017, 9, 25513–25521. [Google Scholar] [CrossRef] [PubMed]
  33. Chu, K.C.; Chao, C.Y.; Chen, Y.F.; Wu, Y.C.; Chen, C.C. Electrically controlled surface plasmon resonance frequency of gold nanorods. Appl. Phys. Lett. 2006, 89, 103107. [Google Scholar] [CrossRef]
  34. Yang, N.; You, T.T.; Gao, Y.K.; Zhang, C.M.; Yin, P.G. Fabrication of a Flexible Gold Nanorod Polymer Metafilm via a Phase Transfer Method as a SERS Substrate for Detecting Food Contaminants. J. Agric. Food Chem. 2018, 66, 6889–6896. [Google Scholar] [CrossRef]
  35. Fang, C.; Shao, L.; Zhao, Y.; Wang, J.; Wu, H. A gold nanocrystal/poly(dimethylsiloxane) composite for plasmonic heating on microfluidic chips. Adv. Mater. 2012, 24, 94–98. [Google Scholar] [CrossRef]
  36. Jiang, N.; Shao, L.; Wang, J. (Gold nanorod core)/(polyaniline shell) plasmonic switches with large plasmon shifts and modulation depths. Adv. Mater. 2014, 26, 3282–3289. [Google Scholar] [CrossRef]
  37. Smitha, S.L.; Gopchandran, K.G.; Ravindran, T.R.; Prasad, V.S. Gold nanorods with finely tunable longitudinal surface plasmon resonance as SERS substrates. Nanotechnology 2011, 22, 265705. [Google Scholar] [CrossRef]
  38. Sau, T.K.; Murphy, C.J.J.L. Seeded high yield synthesis of short Au nanorods in aqueous solution. Langmuir 2004, 20, 6414–6420. [Google Scholar] [CrossRef]
  39. Ferhan, A.R.; Guo, L.; Kim, D.H. Influence of ionic strength and surfactant concentration on electrostatic surfacial assembly of cetyltrimethylammonium bromide-capped gold nanorods on fully immersed glass. Langmuir 2010, 26, 12433–12442. [Google Scholar] [CrossRef]
  40. Gutiérrez, M.V.; Scarpettini, A.F. Kinetic and plasmonic properties of gold nanorods adsorbed on glass substrates. Colloid Interface Sci. Commun. 2019, 33, 100213. [Google Scholar] [CrossRef]
  41. Ben Haddada, M.; Blanchard, J.; Casale, S.; Krafft, J.-M.; Vallée, A.; Méthivier, C.; Boujday, S. Optimizing the immobilization of gold nanoparticles on functionalized silicon surfaces: Amine- vs. thiol-terminated silane. Gold Bulletin 2013, 46, 335–341. [Google Scholar] [CrossRef]
  42. Habteyes, T.G.; Dhuey, S.; Wood, E.; Gargas, D.; Cabrini, S.; Schuck, P.J.; Alivisatos, A.P.; Leone, S.R. Metallic adhesion layer induced plasmon damping and molecular linker as a nondamping alternative. ACS Nano 2012, 6, 5702–5709. [Google Scholar] [CrossRef] [PubMed]
  43. Chen, C.D.; Cheng, S.F.; Chau, L.K.; Wang, C.R. Sensing capability of the localized surface plasmon resonance of gold nanorods. Biosens. Bioelectron. 2007, 22, 926–932. [Google Scholar] [CrossRef]
  44. Yu, Y.; Zeng, P.; Yang, C.; Gong, J.; Liang, R.; Ou, Q.; Zhang, S. Gold-nanorod-coated capillaries for the SERS-based detection of thiram. ACS Appl. Nano Mater. 2019, 2, 598–606. [Google Scholar] [CrossRef]
  45. Ferhan, A.R.; Hwang, Y.; Ibrahim, M.S.B.; Anand, S.; Kim, A.; Jackman, J.A.; Cho, N.-J. Ultrahigh surface sensitivity of deposited gold nanorod arrays for nanoplasmonic biosensing. Appl. Mater. Today 2021, 23, 101046. [Google Scholar] [CrossRef]
  46. Zhang, F.; Sautter, K.; Larsen, A.M.; Findley, D.A.; Davis, R.C.; Samha, H.; Linford, M.R. Chemical vapor deposition of three aminosilanes on silicon dioxide: Surface characterization, stability, effects of silane concentration, and cyanine dye adsorption. Langmuir 2010, 26, 14648–14654. [Google Scholar] [CrossRef]
  47. Howarter, J.A.; Youngblood, J.P. Optimization of silica silanization by 3-aminopropyltriethoxysilane. Langmuir 2006, 22, 11142–11147. [Google Scholar] [CrossRef] [PubMed]
  48. Zeng, X.; Xu, G.; Gao, Y.; An, Y. Surface wettability of (3-aminopropyl) triethoxysilane self-assembled monolayers. J. Phys. Chem. B 2011, 115, 450–454. [Google Scholar] [CrossRef]
  49. Kim, J.; Holinga, G.J.; Somorjai, G.A. Curing induced structural reorganization and enhanced reactivity of amino-terminated organic thin films on solid substrates: Observations of two types of chemically and structurally unique amino groups on the surface. Langmuir 2011, 27, 5171–5175. [Google Scholar] [CrossRef]
  50. Tanaka, M.; Sawaguchi, T.; Kuwahara, M.; Niwa, O. Surface modification of silicon oxide with trialkoxysilanes toward close-packed monolayer formation. Langmuir 2013, 29, 6361–6368. [Google Scholar] [CrossRef]
  51. Jackman, J.A.; Rahim Ferhan, A.; Cho, N.J. Nanoplasmonic sensors for biointerfacial science. Chem. Soc. Rev. 2017, 46, 3615–3660. [Google Scholar] [CrossRef] [PubMed]
  52. Gunnarsson, L.; Bjerneld, E.; Xu, H.; Petronis, S.; Kasemo, B.; Käll, M. Interparticle coupling effects in nanofabricated substrates for surface-enhanced Raman scattering. Appl. Phys. Lett. 2001, 78, 802–804. [Google Scholar] [CrossRef]
  53. Osberg, K.D.; Harris, N.; Ozel, T.; Ku, J.C.; Schatz, G.C.; Mirkin, C.A. Systematic study of antibonding modes in gold nanorod dimers and trimers. Nano Lett. 2014, 14, 6949–6954. [Google Scholar] [CrossRef] [PubMed]
  54. Tabor, C.; Van Haute, D.; El-Sayed, M.A. Effect of orientation on plasmonic coupling between gold nanorods. ACS Nano 2009, 3, 3670–3678. [Google Scholar] [CrossRef] [PubMed]
  55. Slaughter, L.S.; Wu, Y.; Willingham, B.A.; Nordlander, P.; Link, S. Effects of symmetry breaking and conductive contact on the plasmon coupling in gold nanorod dimers. ACS Nano 2010, 4, 4657–4666. [Google Scholar] [CrossRef]
  56. Fu, R.; Gomez, D.E.; Shi, Q.; Yap, L.W.; Lyu, Q.; Wang, K.; Yong, Z.; Cheng, W. Orientation-dependent soft plasmonics of gold nanobipyramid plasmene nanosheets. Nano Lett. 2021, 21, 389–396. [Google Scholar] [CrossRef]
  57. Funston, A.M.; Novo, C.; Davis, T.J.; Mulvaney, P. Plasmon coupling of gold nanorods at short distances and in different geometries. Nano Lett. 2009, 9, 1651–1658. [Google Scholar] [CrossRef]
  58. Kumar, J.; Wei, X.; Barrow, S.; Funston, A.M.; Thomas, K.G.; Mulvaney, P. Surface plasmon coupling in end-to-end linked gold nanorod dimers and trimers. Phys. Chem. Chem. Phys. 2013, 15, 4258–4264. [Google Scholar] [CrossRef]
  59. Martinsson, E.; Sepulveda, B.; Chen, P.; Elfwing, A.; Liedberg, B.; Aili, D. Optimizing the refractive index sensitivity of plasmonically coupled gold nanoparticles. Plasmonics 2014, 9, 773–780. [Google Scholar] [CrossRef]
  60. Li, J.; Ye, J.; Chen, C.; Li, Y.; Verellen, N.; Moshchalkov, V.V.; Lagae, L.; Van Dorpe, P. Revisiting the surface sensitivity of nanoplasmonic biosensors. ACS Photonics 2015, 2, 425–431. [Google Scholar] [CrossRef] [Green Version]
  61. Jackman, J.A.; Ferhan, A.R.; Yoon, B.K.; Park, J.H.; Zhdanov, V.P.; Cho, N.-J. Indirect nanoplasmonic sensing platform for monitoring temperature-dependent protein adsorption. Anal. Chem. 2017, 89, 12976–12983. [Google Scholar] [CrossRef] [PubMed]
  62. Chakraborty, S.; Joshi, P.; Shanker, V.; Ansari, Z.; Singh, S.P.; Chakrabarti, P. Contrasting effect of gold nanoparticles and nanorods with different surface modifications on the structure and activity of bovine serum albumin. Langmuir 2011, 27, 7722–7731. [Google Scholar] [CrossRef]
  63. Landoulsi, J.; Dupres, V. Direct AFM force mapping of surface nanoscale organization and protein adsorption on an aluminum substrate. Phys. Chem. Chem. Phys. 2013, 15, 8429–8440. [Google Scholar] [CrossRef] [PubMed]
  64. Arroyo-Hernández, M.; Daza, R.; Pérez-Rigueiro, J.; Elices, M.; Nieto-Márquez, J.; Guinea, G.V. Optimization of functionalization conditions for protein analysis by AFM. Appl. Surf. Sci. 2014, 317, 462–468. [Google Scholar] [CrossRef]
  65. Acuña-Nelson, S.-M.; Bastías-Montes, J.-M.; Cerda-Leal, F.-R.; Parra-Flores, J.-E.; Aguirre-García, J.-S.; Toledo, P.G. Nanocoatings of bovine serum albumin on glass: Effects of pH and temperature. J. Nanomater. 2020, 2020, 8640818. [Google Scholar] [CrossRef]
  66. Retnakumari, A.; Setua, S.; Menon, D.; Ravindran, P.; Muhammed, H.; Pradeep, T.; Nair, S.; Koyakutty, M. Molecular-receptor-specific, non-toxic, near-infrared-emitting Au cluster-protein nanoconjugates for targeted cancer imaging. Nanotechnology 2009, 21, 055103. [Google Scholar] [CrossRef]
  67. Mazzotta, F.; Johnson, T.W.; Dahlin, A.B.; Shaver, J.; Oh, S.-H.; Hook, F. Influence of the evanescent field decay length on the sensitivity of plasmonic nanodisks and nanoholes. Acs Photonics 2015, 2, 256–262. [Google Scholar] [CrossRef]
  68. Jackman, J.A.; Linardy, E.; Yoo, D.; Seo, J.; Ng, W.B.; Klemme, D.J.; Wittenberg, N.J.; Oh, S.H.; Cho, N.J. Plasmonic nanohole sensor for capturing single virus-like particles toward virucidal drug evaluation. Small 2016, 12, 1159–1166. [Google Scholar] [CrossRef]
  69. Scaletti, F.; Feis, A.; Centi, S.; Pini, R.; Rotello, V.M.; Messori, L. Tuning the interactions of PEG-coated gold nanorods with BSA and model proteins through insertion of amino or carboxylate groups. J. Inorg. Biochem. 2015, 150, 120–125. [Google Scholar] [CrossRef]
  70. Peixoto, L.P.F.; Santos, J.F.; Andrade, G.F. Plasmonic nanobiosensor based on Au nanorods with improved sensitivity: A comparative study for two different configurations. Anal. Chim. Acta 2019, 1084, 71–77. [Google Scholar] [CrossRef]
  71. Nehl, C.; Liao, H.; Hafner, J. Plasmon resonant molecular sensing with single gold nanostars. Proc. SPIE–Int. Soc. Opt. Eng. 2006, 6323, 63230G-1–63230G-8. [Google Scholar]
  72. Chen, S.; Svedendahl, M.; Käll, M.; Gunnarsson, L.; Dmitriev, A. Ultrahigh sensitivity made simple: Nanoplasmonic label-free biosensing with an extremely low limit-of-detection for bacterial and cancer diagnostics. Nanotechnology 2009, 20, 434015. [Google Scholar] [CrossRef] [PubMed]
  73. Thilsted, A.H.; Pan, J.Y.; Wu, K.; Zór, K.; Rindzevicius, T.; Schmidt, M.S.; Boisen, A. Lithography-Free Fabrication of Silica Nanocylinders with Suspended Gold Nanorings for LSPR-Based Sensing. Small 2016, 12, 6745–6752. [Google Scholar] [CrossRef] [PubMed]
  74. Jia, P.; Yang, J. A plasmonic optical fiber patterned by template transfer as a high-performance flexible nanoprobe for real-time biosensing. Nanoscale 2014, 6, 8836–8843. [Google Scholar] [CrossRef]
  75. Kreuzer, M.P.; Quidant, R.; Salvador, J.; Marco, M.; Badenes, G. Colloidal-based localized surface plasmon resonance (LSPR) biosensor for the quantitative determination of stanozolol. Anal. Bioanal. Chem. 2008, 391, 1813–1820. [Google Scholar] [CrossRef]
  76. Zhang, D.; Lu, Y.; Jiang, J.; Zhang, Q.; Yao, Y.; Wang, P.; Chen, B.; Cheng, Q.; Liu, G.L.; Liu, Q. Nanoplasmonic biosensor: Coupling electrochemistry to localized surface plasmon resonance spectroscopy on nanocup arrays. Biosens. Bioelectron. 2015, 67, 237–242. [Google Scholar] [CrossRef]
  77. Kumari, S.; Moirangthem, R.S. Portable and economical plasmonic capillary sensor for biomolecular detection. Sens. Actuators B Chem. 2016, 231, 203–210. [Google Scholar] [CrossRef]
  78. Becker, J.; Trügler, A.; Jakab, A.; Hohenester, U.; Sönnichsen, C. The optimal aspect ratio of gold nanorods for plasmonic bio-sensing. Plasmonics 2010, 5, 161–167. [Google Scholar] [CrossRef]
  79. Lee, K.-S.; El-Sayed, M.A. Gold and silver nanoparticles in sensing and imaging: Sensitivity of plasmon response to size, shape, and metal composition. J. Phys. Chem. B 2006, 110, 19220–19225. [Google Scholar] [CrossRef]
  80. Petronella, F.; De Biase, D.; Zaccagnini, F.; Verrina, V.; Lim, S.-I.; Jeong, K.-U.; Miglietta, S.; Petrozza, V.; Scognamiglio, V.; Godman, N.P. Label-free and reusable antibody-functionalized gold nanorod arrays for the rapid detection of Escherichia coli cells in a water dispersion. Environ. Sci.: Nano 2022, 9, 3343–3360. [Google Scholar] [CrossRef]
  81. Placido, T.; Fanizza, E.; Cosma, P.; Striccoli, M.; Curri, M.L.; Comparelli, R.; Agostiano, A. Electroactive layer-by-layer plasmonic architectures based on au nanorods. Langmuir 2014, 30, 2608–2618. [Google Scholar] [CrossRef] [PubMed]
  82. Chuang, E.-Y.; Lin, P.-Y.; Wang, P.-F.; Kuo, T.-R.; Chen, C.-H.; Manga, Y.B.; Hsiao, Y.-C. Label-free, smartphone-based, and sensitive nano-structural liquid crystal aligned by ceramic silicon compound–constructed DMOAP-based biosensor for the detection of urine albumin. Int. J. Nanomed. 2021, 16, 763. [Google Scholar] [CrossRef] [PubMed]
  83. Wang, I.-T.; Lee, Y.-H.; Chuang, E.-Y.; Hsiao, Y.-C. Sensitive, color-indicating and labeling-free multi-detection cholesteric liquid crystal biosensing chips for detecting albumin. Polymers 2021, 13, 1463. [Google Scholar] [CrossRef] [PubMed]
  84. Bhardwaj, H.; Sumana, G.; Marquette, C.A. Gold nanobipyramids integrated ultrasensitive optical and electrochemical biosensor for Aflatoxin B1 detection. Talanta 2021, 222, 121578. [Google Scholar] [CrossRef]
  85. Trung, N.B.; Yoshikawa, H.; Tamiya, E.; Viet, P.H.; Takamura, Y.; Ashahi, T. Propitious immobilization of gold nanoparticles on poly (dimethylsiloxane) substrate for local surface plasmon resonance based biosensor. Jpn. J. Appl. Phys. 2012, 51, 037001. [Google Scholar] [CrossRef]
  86. Kyaw, H.H.; Al-Harthi, S.H.; Sellai, A.; Dutta, J. Self-organization of gold nanoparticles on silanated surfaces. Beilstein J. Nanotechnol. 2015, 6, 2345–2353. [Google Scholar] [CrossRef]
  87. Zhu, S.L.; Zhang, J.B.; Yue, L.Y.L.; Hartono, D.; Liu, A.Q. Label-free protein detection via gold nanoparticles and localized surface plasmon resonance. Adv. Mat. Res. 2009, 74, 95–98. [Google Scholar] [CrossRef]
  88. Calatayud-Sanchez, A.; Ortega-Gomez, A.; Barroso, J.; Zubia, J.; Benito-Lopez, F.; Villatoro, J.; Basabe-Desmonts, L. A method for the controllable fabrication of optical fiber-based localized surface plasmon resonance sensors. Sci. Rep. 2022, 12, 9566. [Google Scholar] [CrossRef]
  89. Chen, H.; Zhao, L.; Chen, D.; Hu, W. Stabilization of gold nanoparticles on glass surface with polydopamine thin film for reliable LSPR sensing. J. Colloid Interface Sci. 2015, 460, 258–263. [Google Scholar] [CrossRef]
  90. Golmohammadi, S.; Etemadi, M. Analysis of plasmonic gold nanostar arrays with the optimum sers enhancement factor on the human skin tissue. J. Appl. Spectrosc. 2019, 86, 925–933. [Google Scholar] [CrossRef]
  91. Kooij, E.S.; Brouwer, E.M.; Wormeester, H.; Poelsema, B. Ionic strength mediated self-organization of gold nanocrystals: An AFM study. Langmuir 2002, 18, 7677–7682. [Google Scholar] [CrossRef]
  92. Kim, Y.-P.; Oh, E.; Hong, M.-Y.; Lee, D.; Han, M.-K.; Shon, H.K.; Moon, D.W.; Kim, H.-S.; Lee, T.G. Gold nanoparticle-enhanced secondary ion mass spectrometry imaging of peptides on self-assembled monolayers. Anal. Chem. 2006, 78, 1913–1920. [Google Scholar] [CrossRef] [PubMed]
  93. Nath, N.; Chilkoti, A. A colorimetric gold nanoparticle sensor to interrogate biomolecular interactions in real time on a surface. Anal. Chem. 2002, 74, 504–509. [Google Scholar] [CrossRef] [PubMed]
  94. Tunc, I.; Susapto, H.H. Label-free detection of ovarian cancer antigen CA125 by surface enhanced Raman scattering. J. Nanosci. Nanotechnol. 2020, 20, 1358–1365. [Google Scholar] [CrossRef] [PubMed]
Nanomaterials 12 03432 g001 550
Figure 1. (A) Overview of technical considerations for preparing low- and high-coverage AuNR sensing platforms. (B) Fabrication concept and measurement strategy to control AuNR platform properties by varying the APTES concentration.
Figure 1. (A) Overview of technical considerations for preparing low- and high-coverage AuNR sensing platforms. (B) Fabrication concept and measurement strategy to control AuNR platform properties by varying the APTES concentration.
Nanomaterials 12 03432 g001
Nanomaterials 12 03432 g002 550
Figure 2. (A–E) SEM images of deposited AuNRs on glass substrate as a function of the APTES concentration (1–30% v/v in ethanol) used during fabrication. Scale bars are 1 µm. (F) Surface density of deposited AuNRs on the glass substrate as a function of APTES concentration and expressed in terms of nanorods per µm2. (G) Representative SEM images corresponding to deposited AuNRs in different aggregation states that are defined as Type A (individual AuNR), Type B (two AuNRs adjoined together), and Type C (three or more AuNRs adjoined together). (H) Surface density of deposited AuNRs in the different aggregation states based on the data in panel (G). (I) Optical extinction spectra of deposited AuNRs on glass substrate as a function of the APTES concentration. Data in panels (F) and (H) are reported as the mean ± standard deviation from three experiments.
Figure 2. (A–E) SEM images of deposited AuNRs on glass substrate as a function of the APTES concentration (1–30% v/v in ethanol) used during fabrication. Scale bars are 1 µm. (F) Surface density of deposited AuNRs on the glass substrate as a function of APTES concentration and expressed in terms of nanorods per µm2. (G) Representative SEM images corresponding to deposited AuNRs in different aggregation states that are defined as Type A (individual AuNR), Type B (two AuNRs adjoined together), and Type C (three or more AuNRs adjoined together). (H) Surface density of deposited AuNRs in the different aggregation states based on the data in panel (G). (I) Optical extinction spectra of deposited AuNRs on glass substrate as a function of the APTES concentration. Data in panels (F) and (H) are reported as the mean ± standard deviation from three experiments.
Nanomaterials 12 03432 g002
Nanomaterials 12 03432 g003 550
Figure 3. (A–E) Representative optical extinction spectra of fabricated AuNR platforms in different water-glycerol mixture environments (0–40% v/v glycerol). Insets are linear fits of the corresponding Δλmax shifts as a function of the bulk refractive index change in the different water–glycerol mixtures. The platforms were fabricated using different APTES concentrations to functionalize the glass surface prior to AuNR deposition. (F) Summary of bulk refractive index values for different AuNR platforms. Data are reported as the mean ± standard deviation from three experiments.
Figure 3. (A–E) Representative optical extinction spectra of fabricated AuNR platforms in different water-glycerol mixture environments (0–40% v/v glycerol). Insets are linear fits of the corresponding Δλmax shifts as a function of the bulk refractive index change in the different water–glycerol mixtures. The platforms were fabricated using different APTES concentrations to functionalize the glass surface prior to AuNR deposition. (F) Summary of bulk refractive index values for different AuNR platforms. Data are reported as the mean ± standard deviation from three experiments.
Nanomaterials 12 03432 g003
Nanomaterials 12 03432 g004 550
Figure 4. (A) Representative optical extinction spectra for BSA protein adsorption onto fabricated AuNR platform in the presence of different bulk protein concentrations. (B) Summary of final Δλmax shifts corresponding to data in panel (A). (C) Representative optical extinction spectra for sequential addition of COVID-19 N antigen, primary antibody, and secondary antibody onto fabricated AuNR platform. (D) Summary of final Δλmax shifts corresponding to data in panel (C). Data in panels (B) and (D) are reported as the mean ± standard deviation from three experiments.
Figure 4. (A) Representative optical extinction spectra for BSA protein adsorption onto fabricated AuNR platform in the presence of different bulk protein concentrations. (B) Summary of final Δλmax shifts corresponding to data in panel (A). (C) Representative optical extinction spectra for sequential addition of COVID-19 N antigen, primary antibody, and secondary antibody onto fabricated AuNR platform. (D) Summary of final Δλmax shifts corresponding to data in panel (C). Data in panels (B) and (D) are reported as the mean ± standard deviation from three experiments.
Nanomaterials 12 03432 g004
Nanomaterials 12 03432 g005 550
Figure 5. Comparison of nanoplasmonic biosensing performance of the AuNR platform in this study compared to other gold nanostructures reported in the literature. The data correspond to the reported LSPR Δλmax shifts for BSA protein adsorption at different bulk protein concentrations. The literature results were obtained from the following references: a-[69], b-[70], c-[45], d-[71], e-[72], f-[73], g-[74], h-[9], i-[75], j-[76], and k-[77].
Figure 5. Comparison of nanoplasmonic biosensing performance of the AuNR platform in this study compared to other gold nanostructures reported in the literature. The data correspond to the reported LSPR Δλmax shifts for BSA protein adsorption at different bulk protein concentrations. The literature results were obtained from the following references: a-[69], b-[70], c-[45], d-[71], e-[72], f-[73], g-[74], h-[9], i-[75], j-[76], and k-[77].
Nanomaterials 12 03432 g005
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Hwang, Y.; Koo, D.J.; Ferhan, A.R.; Sut, T.N.; Yoon, B.K.; Cho, N.-J.; Jackman, J.A. Optimizing Plasmonic Gold Nanorod Deposition on Glass Surfaces for High-Sensitivity Refractometric Biosensing. Nanomaterials 2022, 12, 3432. https://doi.org/10.3390/nano12193432

AMA Style

Hwang Y, Koo DJ, Ferhan AR, Sut TN, Yoon BK, Cho N-J, Jackman JA. Optimizing Plasmonic Gold Nanorod Deposition on Glass Surfaces for High-Sensitivity Refractometric Biosensing. Nanomaterials. 2022; 12(19):3432. https://doi.org/10.3390/nano12193432

Chicago/Turabian Style

Hwang, Youngkyu, Dong Jun Koo, Abdul Rahim Ferhan, Tun Naw Sut, Bo Kyeong Yoon, Nam-Joon Cho, and Joshua A. Jackman. 2022. "Optimizing Plasmonic Gold Nanorod Deposition on Glass Surfaces for High-Sensitivity Refractometric Biosensing" Nanomaterials 12, no. 19: 3432. https://doi.org/10.3390/nano12193432

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop