Synergic effect of recycled cotton fabric and wood saw dust reinforced biodegradable polypropylene composites

Authors

  • MK Islam Department of Materials and Metallurgical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka-1000, Bangladesh
  • A Sharif Department of Materials and Metallurgical Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka-1000, Bangladesh
  • M Hussain Dept. of Chemical Engineering, Hanyang university Erica Campas, Sannok-Gu, Gyeongi-do 426-791, Korea
  • I Hassan Dept. of Chemical Engineering, Hanyang university Erica Campas, Sannok-Gu, Gyeongi-do 426-791, Korea

DOI:

https://doi.org/10.3329/bjsir.v54i1.40727

Keywords:

Materials and Metallurgical Engineering

Abstract

Hybrid polymer matrix composites of waste cotton fabric and wood saw dust reinforcements were studied with a view to recycling the wastes from garments and carpentry industries. Polymer composites with cotton fabric and wood-saw-dust reinforcements were fabricated using hot press machine. Their physical, thermal and mechanical behaviors were discussed in terms of moisture absorption, thermal stability, tensile strength, elastic modulus, flexural strength and flexural modulus. Compositional analyses of fibers, matrix and composites were carried out with FTIR spectroscopy. Experimental results revealed that tensile and flexural strength of the composites increased with cotton fabric reinforcement. On the other hand, with increasing wood saw dust strength decreased up to a certain limit and then increased again. Water absorption of the hybrid composites increased substantially with increasing natural filler contents. Maximum water absorption was observed in 20% fabric/wood-saw-dust reinforced polymer composite. Furthermore, TGA graphs suggest better thermal stability of the hybrid composites than that of pure polypropylene.

Bangladesh J. Sci. Ind. Res.54(1), 21-30, 2019

Downloads

Download data is not yet available.
Abstract
990
PDF
634

Downloads

Published

2019-03-25

How to Cite

Islam, M., Sharif, A., Hussain, M., & Hassan, I. (2019). Synergic effect of recycled cotton fabric and wood saw dust reinforced biodegradable polypropylene composites. Bangladesh Journal of Scientific and Industrial Research, 54(1), 21–30. https://doi.org/10.3329/bjsir.v54i1.40727

Issue

Vol. 54 No. 1 (2019)

Section

Articles

License

Bangladesh Council of Scientific and Industrial Research (BCSIR) holds the copyright to all contents published in Bangladesh Journal of Scientific and Industrial Research (BJSIR). A copyright transfer form should be signed by the author(s) and be returned to BJSIR.

The entire contents of the BJSIR are protected under Bangladesh Council of Scientific and Industrial Research (BCSIR) copyrights.

Creative Commons Licence
BJSIR is an open access journal, and articles are distributed under the terms of the Creative Commons Attribution-NonCommercial License (CC BY-NC) Creative Commons Attribution-NonCommercial 4.0 International License which allows others remix, tweak, and build upon the articles non-commercially, and although their new works must also acknowledge and be non-commercial, they don’t have to license their derivative works on the same terms.