Fabrication of CO Gas Sensor based on Nano Crystalline CdO-Doped Cu thin Films Prepared by PLD

Authors

  • Hassan H. Darwoysh  Department of Physics, College of Education, University of Mustansiriyah, Baghdad, Iraq
  • Ali A. Yousif  Department of Physics, College of Science, University of Baghdad, Baghdad, Iraq
  • Kadhim A. Aadim  Department of Physics, College of Science, University of Baghdad, Baghdad, Iraq

DOI:

https://doi.org//10.32628/IJSRST52310247

Keywords:

gas sensors; CdO thin films; PLD; SEM, EDS, XRD

Abstract

Pulsed laser deposition (PLD) was used to create thin copper-doped cadmium oxide (CdO) films at various concentrations. The deposition process was done at room temperature (300 K). The surface morphology of the CdO thin films revealed an intricate network resembling a prism. The cubic crystal nanostructure and the CdO thin films are aligned in a (1 1 1) plane. At an operating temperature of 280 degrees Celsius, the sensing characteristics of CdO thin films with a carbon dioxide (CO) nanonanostructure were investigated. The results showed that increasing the copper concentration or increasing the gas concentration to 200 ppm would increase the sensitivity of the gas.

References

  1. K. Gurumurugan, D. Mangalaraj and Sa. K. Narayandass, J. Cyst. Growth, 147,355(1995).
  2. R. S. Rusu and G. I. Rusu, J. of Optoelectronics and Advanced Materials 7, 1511 (2005).
  3. Dong Ju Seo, J. of the Korean Physical Society, 45, 1575 (2004).
  4. D. M. Carballeda-Galicia, R. Castanedo-Perez, O. Jimenez- Sandoval, G. Tores-Delgado and C. I. Zuniga-Romero, Thin Solid Films 371,105 (2000).
  5. B. J. Lockande and M. D. Uplane, Mater. Res. Bull. 36, 439 (2001).
  6. A. A. Dakhel and F. Z. Henari, Cyst. Res. Technol. 38, 979 (2003).
  7. R.L.Mishra, A.K.Sharma and S.G.Prakash, J. of Nanomaterials and Biostructures, 4, 511 (2009).
  8. K.Gurumurugan, D.Mangalraj and S.K.Narayanandas, Thin Solid Films, 251, 7 (1994).
  9. K. L Chopra, S. Major and D K Pandya, Thin Solid Films 102, 1(1983).
  10. S. Ashok, P. P Sharma and S J Fonash, IEEE Trans. on Electron. Devices, ED-27, 725 (1980).
  11. O. Gomez Daza, A. Arias-Carbajal Readigos, J. Campos, M. T. S. Nair and P. K. Nair, Semicond. Sci. Technol. 15, 1022 (2000).
  12. Adachi Sadao, Numerical Data and Graphical Information (Hardcover, ISBN 978-0-7923-8567-7(1999) 736).
  13. A. Renolds, D. C. Look and B. Jagai, Solid State Comm. 99, 873 (1996).
  14. H M Ali, H A Mohamed, M M Wakkad and M F Hasaneen, Jpn. J. Appl. Phys. 48, 1101 (2009).
  15. K.B.Sundaram and G.K. Bhagara, J. Phys.D: Appl.Phys. 14, 333 (1981).
  16. G.Gordillo, L.C.Moreno, W.Dela Cruz and P. Teheran, Thin Solid Films 252, 61 (1994).
  17. A.Salehi and M. Gholizade, Sensors Actuators B: Chemical 89, 173 (2003).
  18. C.Cobianu, C.Saraniu, P.Ciciliano, S. Caponoe, M. Utrianien and L.Ninisto, Sensors Actuators B 77, 496 (2001).
  19. R. S. Rusu and G. I. Rusua, J. of Optoelectronics and Advanced Materials. 7, 823 (2005). 8 Mahdi H. Suhail, Issam M. Ibrahim and G. Mohan Rao: Characterization and gas ….
  20. K. Gurumurgan, D. Mangalraj, S. K. Narayandass and C. Balasubramanian, Phys. Status Solidi (a), 143, 85 (1994).
  21. P. A. Radi, A. G. Brito-Madurro, J. M. Madurro and N. O. Dantas, Braz. J. Phys.36, 412 (2006).
  22. K.Nomura, H.Shiozawa, T.T akada, H. Reuter and E. Richter, J. Mater.Sci.8, 301 (1997).
  23. M G. Ambia, M N. Eslam and M O. Hakim, Sol. Energy Mat. Sol. Cells, 28, 103 (1992).
  24. Hussein Abdel-Hafez Mohamed and Hazem Mahmoud Ali, Sci. and Technol. Adv. Mater. 9, 025016,(9pp) (2008).
  25. M.Mahaboob Beevia, M.Anusuyab, V.Saravananc and IACSIT Member, International J. of Chemical Engineering and Applications, 1, 151 (2010).
  26. H. A Mohamed, H M Ali, S. H Mohamed and M M Abd El-Raheem, Eur. Phys. J. Appl. Phys. 34, 7 (2006).

Downloads

Published

2023-04-30

Issue

Section

Research Articles

How to Cite

[1]
Hassan H. Darwoysh, Ali A. Yousif, Kadhim A. Aadim, " Fabrication of CO Gas Sensor based on Nano Crystalline CdO-Doped Cu thin Films Prepared by PLD, International Journal of Scientific Research in Science and Technology(IJSRST), Online ISSN : 2395-602X, Print ISSN : 2395-6011, Volume 10, Issue 3, pp.191-198, May-June-2023. Available at doi : https://doi.org/10.32628/IJSRST52310247