Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

Extensional rheology of coating suspensions in relation with misting in film coaters

  • Gabriel Ascanio , Pierre J. Carreau , Olivier Réglat and Philippe A Tanguy
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2005-20-01-p048-053
Keywords: Misting; Extensional properties; Film coaters; Coating suspensions; Rheology
Published Online: 2018-07-19
Published in Print: 2005-01-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 20 Issue 1
Submit manuscript

Journal and Issue

Articles in the same Issue

The fate of chlorine species during high temperature chlorine dioxide bleaching
Preparation of brightness sheets (ISO 3688:1999) – Problems and proposed modifications
Modelling of forming and densification of fibre mats in twin-wire formers
The stress-strain relationship of the fibre network in wet pressing
Application of a pitometer to measure the tangential velocity in a cylindrical through-flow hydrocyclone operated with a fiber suspension
Influence of polyelectrolyte complexes on the strength properties of papers from unbleached kraft pulps with different yields
Dimensional consistency of wood chips over time
Extensional rheology of coating suspensions in relation with misting in film coaters
Further insight in the web consolidation process Part II. Triangular phase diagrams for analysis of paper shrinkage
Further insight in the web consolidation process Part III. Modelling of paper shrinkage
Quantification of dislocations in spruce pulp and hemp fibres using polarized light microscopy and image analysis
Water-induced surface roughness of offset papers
Simulation and measurement of velocity and concentration of dry wood fibres flowing through a throttle
Condebelt drying and linerboard performance
Second-law analysis applied to a kraft pulp mill
Process efficiency with entropy – The recovery cycle in the kraft pulp process
Surface characterisation of single fibres from mechanical pulps by contact angle measurements
Characterization of industrial and laboratory pulp fibres using HCl, Cellulase and FiberMaster analysis
Doctorial dissertations in the field of pulp and paper science and technology 2004
ANNUAL INDEX FOR 2006
Downloaded on 30.4.2024 from https://www.degruyter.com/document/doi/10.3183/npprj-2005-20-01-p048-053/html
Scroll to top button