Abstract
The carbon nanotubes (CNTs)-containing composites of poly(butylene succinate) (PBS) were prepared by melt-blending in a batch mixer with three concentrations by weight of CNTs: 1, 2 and 3 %. State of dispersion-distribution of the CNTs in the PBS matrix was examined by electron microscopic observations that revealed homogeneous distribution of agglomerated CNTs in PBS matrix. The dynamic mechanical studies demonstrated an increase in the storage modulus of PBS matrix with the CNTs loading. Melt-state rheological properties measurements were found to be modified with CNT loading changing from liquid-like, to gel-like and then to viscoelastic solid-like. Finally, the in-plane electrical conductivity was found to be substantially enhanced with CNT loading, whereas the through-plane conductivity was found to be only slighted increased with the CNT loading. Such changes in viscoelastic properties along with the improvements in both thermomechanical and electrical properties are expected to open opportunities for the use of PBS extending its applications from the classical field of packaging to new niches such as tissue-engineering.
References
Ali, F. B., Mohan, R., “Thermal, Mechanical, and Rheological Properties of Biodegradable Polybutylene Succinate/Carbon Nanotubes Nanocomposites”, Polym. Compos., 31, 1309–1314 (2010)Search in Google Scholar
Bousmina, M., Muller, R., “Rheology/Morphology/Flow Conditions Relationships for Polymethylmethacrylate/Rubber Blend”, Rheol. Acta, 35, 369–381 (1996) DOI: http://dx.doi.org/10.1007/BF00403538Search in Google Scholar
Dresselhaus, M. S., Dresselhaus, G. and Eklund, P. C.: Science of Fullerenes and Carbon Nanotubes, Academic Press, San Diego (1996)10.1016/B978-012221820-0/50003-4Search in Google Scholar
Eslami, H., Grmela, M. and Bousmina, M., “Mesoscopic Rheological Model of Layered Silicate Nanocomposites” J. Rheol.51, 1189–1222 (2007) DOI: http://dx.doi.org/10.1122/1.2790461Search in Google Scholar
Grmela, M., Bousmina, M. and Palierne, J. F., “On The Rheology of Immiscible Blends”. Rheol. Acta, 40, 560–569 (2001) DOI: http://dx.doi.org/10.1007/s003970100188Search in Google Scholar
Hoffmann, B., Kressler, J., Stöpplmann, G., Friedrich, Chr. and Kim, G. M., “Rheology of Nanocomposites Based on Layered Silicate and Polyamide-12”, Colloid Polym. Sci., 278, 629–636 (2000) DOI: http://dx.doi.org/10.1007/s003960000294Search in Google Scholar
Ishioka, D. R., Kitakuni, E. and Ichikawa, Y., “Volume 4 Aliphatic Polyesters: Bionolle, Biopolymers, in Polyesters III. Application and Commercial Products, Doi, Y., Steinbuchel, A. (Eds.), Wiley-VCH, Weinheim p. 275–297 (2002)10.1002/3527600035.bpol4010Search in Google Scholar
Iza, M., Bousmina, M., “Nonlinear Rheology of Immiscible Polymer Blends: Step Strain Experiments”, J. Rheol., 44, 1363–1384 (2000) DOI: http://dx.doi.org/10.1122/1.1308521Search in Google Scholar
Iza, M., Bousmina, M., Jerome, R., “Rheology Of Compatibilized Immiscible Viscoelastic Polymer Blends”, Rheologica Acta.40, 10–22 (2001) DOI: http://dx.doi.org/10.1007/s003970000112Search in Google Scholar
Song, L., Qiu, Z., “Biodegradable Poly(butylene succinate)/Multi-Walled Carbon Nanotubes Nanocomposite at Low Carbon Nanotubes Loading: Morphology, Crystallization and Mechanical Property”, J. Nanosci. Nanotechnol., 10, 965–972 (2010) PMid:20352743; DOI: http://dx.doi.org/10.1166/jnn.2010.1815Search in Google Scholar PubMed
Shih, Y. F., Chen, L. S. and Jeng, R. J., “Preparation and Properties of Biodegradable PBS/Multi-Walled Carbon Nanotubes Nanocomposites” Polymer49, 4602–4611 (2008) DOI: http://dx.doi.org/10.1016/j.polymer.2008.08.015Search in Google Scholar
Shih, Y. F., “Thermal Degradation and Kinetic Analysis of Biodegradable PBS/Multiwalled Carbon Nanotube Nanocomposites”, J. Polym. Sci. Part B: Polym. Phys.47, 1231–1239 (2009) DOI: http://dx.doi.org/10.1002/polb.21728Search in Google Scholar
Ray, S. S., Okamoto, K. and Okamoto, M., “Structure-Property Relationship in Biodegradable Poly(butylene succinate)/Layered Silicate Nanocomposites”, Macromolecules, 36, 2355–2367 (2003) DOI: http://dx.doi.org/10.1021/ma021728ySearch in Google Scholar
Ray, S. S., Bousmina, M., “Biodegradable Polymers and their Layered Silicate Nanocomposites: In Greening the 21st Century Materials World”, Prog. Mater. Sci., 50, 962–1079 (2005) DOI: http://dx.doi.org/10.1016/j.pmatsci.2005.05.002Search in Google Scholar
Ray, S. S., Vaudreuil, S., Maazouz, A. and Bousmina, M., “Dispersion of Multi-Walled Carbon Nanotubes in Biodegradable Poly(butylene succinate) Matrix”, J. Nanosci. Nanotechnol., 6, 2191–2195 (2006a) PMid:17025148; DOI: http://dx.doi.org/10.1166/jnn.2006.368Search in Google Scholar PubMed
Ray, S. S., Bousmina, M., “Crystallization Behavior of Poly (butylene succinate)Co-Adipate Nanocomposite”, Macromol. Chem. Physics, 207, 1207–1219 (2006b) DOI: http://dx.doi.org/10.1002/macp.200600163Search in Google Scholar
Ray, S. S., Bousmina, M., “The Relations Between Structure and Mechanical Properties of Poly(butylene succinate-co-adipate)/Montmorillonite Nanocomposites”, J. Polym. Eng., 26, 885–901 (2006c)10.1515/POLYENG.2006.26.8-9.885Search in Google Scholar
Ray, S. S., Bousmina, M. and Bandyopadhyay, J., “Effect of Organoclay on the Morphology and Properties of Poly(propylene)/Poly[(butylene succinate)-co-adipate] Blends”, Macromol. Mater. Eng., 292, 729–747 (2007a) DOI: http://dx.doi.org/10.1002/mame.200700029Search in Google Scholar
Ray, S. S., Bousmina, M. and Bandyopadhyay, J., “Thermal and Thermomechanical Properties of Poly (butylene succinate)-co-adipate Nanocomposite”, Polym. Degr. Stab., 92, 802–812 (2007b) DOI: http://dx.doi.org/10.1016/j.polymdegradstab.2007.02.002Search in Google Scholar
Ray, S. S., Bousmina, M. and Bandyopadhyay, J., “Influence of Degree of Intercalation on the Crystal Growth Kinetics of Poly(butylene succinate)-co-adipate Nanocomposites”, Eur. Polym. J., 44, 3133–3145 (2008) DOI: http://dx.doi.org/10.1016/j.eurpolymj.2008.07.035Search in Google Scholar
© 2014, Carl Hanser Verlag, Munich