Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter November 29, 2018

DGM News

From the journal International Journal of Materials Research
https://doi.org/10.3139/146.018124
Published Online: 2018-11-29
Published in Print: 2018-12-10

© 2018, Carl Hanser Verlag, München

From the journal
International Journal of Materials Research
International Journal of Materials Research
Volume 109 Issue 12

Journal and Issue

Articles in the same Issue

Contents
Contents
Original Contributions
Dendritic structure formation of magnesium alloys for the manipulation of corrosion properties: Part 1 – microstructure
The influence of twinning on plastic constitutive description of a magnesium alloy
Effect of V and Zr microalloying, and heat treatment on microstructure and mechanical properties of secondary Al-7Si-3Cu-0.3Mg alloy
Effect of heat treatment on microstructure, hardening and plasticity of a commercial Al–Zn–Mg–Cu alloy
Microstructural evolution and mechanical properties of thixoformed 7075 aluminum alloy prepared by conventional and new modified SIMA processes
Hot torsion behavior of SP-700 near beta titanium alloy in single and dual phase regions
Effect of B4C in Ti-6Al-4V matrix on workability behavior of powder metallurgy composites during cold upsetting
Synthesis of Ni/YSZ based anode and investigation of effect of PVA as pore-former upon porosity, microstructure and thermal behavior for potential use in solid oxide fuel cells (SOFCs)
The corrosion behavior of porous Ni–Cr–Fe alloy in 2 mol L−1 alkaline solution
Short Communications
The grain growth in alumina compacts sintered under high pressure
DGM News
DGM News
Downloaded on 25.4.2024 from https://www.degruyter.com/document/doi/10.3139/146.018124/html
Scroll to top button