Abstract
The paper reports a study of temperatures of phase transitions of nine samples of real grades of low-alloyed steels, including one sample of pure iron, using differential thermal analysis. Temperatures of phase transitions were measured in the low-temperature interval (20 – 1 000 °C). Investigated systems were analysed at selected rates of heating/cooling and then temperatures of phase transitions for zero heating/cooling rate were determined. The results obtained are compared with temperatures of the equilibrium metastable diagram Fe – C, with results from the software IDS and with temperatures of phase transitions calculated according to relations published in available literature. It follows from the results that differences, sometimes considerable ones, still exist between experimental and theoretical data, which implies the necessity for further systematic research in this area.
References
[1] J.Šesták, Z.Chvoj: J. Therm. Anal. Calorim.32 (1987) 1645.10.1007/BF01913941Search in Google Scholar
[2] A.A.B.Sugden, H.K.D.H.Bhadeshia: Mater. Sci. Technol.5 (1989) 977.Search in Google Scholar
[3] H.Shibata, Y.Arai, M.Suzuki, T.Emi: Metall. Mater. Trans. B31 (2000) 981.10.1007/s11663-000-0074-3Search in Google Scholar
[4] G.D.Pigrova: Metallovedenie i Termicheskaya Obrabotka Metallov8 (1996) 2.Search in Google Scholar
[5] J.Miettinen: Metall. Mater. Trans. B28 (1997) 281.10.1007/s11663-997-0095-2Search in Google Scholar
[6] P.Ryš, M.Cenek, K.Mazanec, A.Hrbek: Material Science I., Metal Science4(In Czech). ACADEMIA, Praha (1975).Search in Google Scholar
[7] C.Capdevila, F.G.Caballero, C.García de Andrés: Metall. and Mater. Trans. A32 (2001) 661.Search in Google Scholar
[8] M.Enomoto, J.B.Yang: Metall. Mater. Trans. A39 (2008) 994.10.1007/s11661-008-9493-6Search in Google Scholar
[9] A.T.W.Kempen, F.Sommer, E.J.Mittemeijer: Acta Mater.50 (2002) 3545.10.1016/S1359-6454(02)00149-0Search in Google Scholar
[10] M.Gojić, M.Sućeska, M.Rajič: J. Therm. Anal. Calorim.75 (2004) 947.10.1023/B:JTAN.0000027188.58396.03Search in Google Scholar
[11] A.Kumar, S.Mishra, J.W.Elmer, T.Debroy: Metall. and Mater. Trans. A36 (2005) 15.10.1007/s11661-005-0134-zSearch in Google Scholar
[12] Z.Guo, W.Sha, D.Li: Mater. Sci. Eng. A373 (2004) 10.10.1016/j.msea.2004.01.040Search in Google Scholar
[13] M.Tajima, Y.Nishimoto, K.Shima, Y.Mantani: Tetsu to Hagane.90 (2004) 807.Search in Google Scholar
[14] M.Tajima, Y.Umeyama: High Temp. High Press.34 (2002) 91.10.1068/htwu206Search in Google Scholar
[15] J.Šesták: Measurement of Thermophysical Properties of Solid Substances (In Czech). ACADEMIA, Praha (1982).Search in Google Scholar
[16] J.M.Cabrera-Marrero, V.Carreňo-Galindo, R.D.Morales, F.Chá-vez-Alcalá: ISIJ Int.38 (1998) 812.10.2355/isijinternational.38.812Search in Google Scholar
[17] J.Miettinen: Solidification Analysis Package for Steels-User's Manual of DOS version. Helsinky University of Technology, Helsinky (1999).Search in Google Scholar
[18] X.Huang, S.Uda, X.Yao, S.Koh: J. Crystal Growth294 (2006) 420.10.1016/j.jcrysgro.2006.06.021Search in Google Scholar
[19] Z.Tang, M.J.Kramer, M.Akinc: Intermetallics16 (2008) 255.10.1016/j.intermet.2007.10.004Search in Google Scholar
[20] D.Mirkovič, J.Groebner, R.Schmid-Fetzer, O.Fabrichnaya, H.L.Lukas: J. Alloy Compd.384 (2004) 168.10.1016/j.jallcom.2004.04.100Search in Google Scholar
[21] J.C.Zhao: Methods for Phase Diagram Determination. Elsevier, Oxford (2007).Search in Google Scholar
[22] M.Tajima: Tetsu to Hagane.84 (1998) 547.10.2355/tetsutohagane1955.84.8_547Search in Google Scholar
© 2010, Carl Hanser Verlag, München