Abstract
The paper discussed the issue of creating a functional model of the technological process for manufacturing the “cup” part in the UML language.
REFERENCES
Solov’ev, V.K., Computer-Aided Design of Operating Engineering Processes for Manufacture of Precision Engineering Parts, Izv. Vuz. Av. Tekhnika, 2004, vol. 47, no. 1, pp. 75–77 [Russian Aeronautics (Engl. Transl.), 2004, vol. 47, no. 1, pp. 114–117].
Akhmadiev, A.I. and Egorova, E.I., Automatic Module for Constructing Technological Processes, Nauka i Sovremennoe Obshchestvo: Vzaimodeystvie i Razvitie, 2016, no. 1 (3), pp. 117–121.
Egorova, E.I. and Akhmadiev, A.I., Structural Model for Presentation of Graphic Information, Nauchno-Tekhnicheskii Vestnik Povolzh’ya, 2018, no. 11, pp. 214–217.
Kurylev, D.V., Pechenkin, M.V., and Babushkin, V.M., Metody i sredstva tekhnologicheskoi podgotovki proizvodstva (Methods and Means of Production Engineering), Kazan: Izd. KNITU-KAI, 2020.
Bazrov, B.M., Osnovy tekhnologii mashinostroeniya (Fundamentals of Mechanical Engineering Technology), Moscow: Mashinostroenie, 2005.
Efanov, V.N. and Ivanova, N.S., Expert System for Assessing the Technical Status of Gas Turbine Engines Using the Knowledge Base of Temporal Precedents, Izv. Vuz. Av. Tekhnika, 2023, vol. 66, no. 1, pp. 61–68 [Russian Aeronautics (Engl. Transl.), 2023, vol. 66, no. 1, pp. 64–71].
Bobarika, I.O. and Gruzdev, A.S., A Technique of Hydraulic System Optimization at the Preliminary Design Stage by the NSGA-II Genetic Algorithm, Izv. Vuz. Av. Tekhnika, 2023, vol. 66, no. 2, pp. 140–147 [Russian Aeronautics (Engl. Transl.), 2023, vol. 66, no. 2, pp. 387–395].
Khaliulin, V.I., Batrakov, V.V., and Petrov, P.A., Problem Description and a Study of Reinforcement Components to Produce Composite Hybrid Structures, Izv. Vuz. Av. Tekhnika, 2022, vol. 65, no. 4, pp. 184–193 [Russian Aeronautics (Engl. Transl.), 2022, vol. 65, no. 4, pp. 843–854].
Khaliulin, V.I., Batrakov, V.V., and Petrov, P.A., Problem Description and a Study of Reinforcement Components to Produce Composite Hybrid Structures, Izv. Vuz. Av. Tekhnika, 2022, vol. 65, no. 4, pp. 184–193 [Russian Aeronautics (Engl. Transl.), 2022, vol. 65, no. 4, pp. 843–854].
Pinqi Xia and Kretov, A.S., Conceptual Assessment of New Helicopter Project Solutions Based on the Take-Off Mass Sensitivity Analysis, Izv. Vuz. Av. Tekhnika, 2022, vol. 65, no. 3, pp. 10–23 [Russian Aeronautics (Engl. Transl.), 2022, vol. 65, no. 3, pp. 446–460].
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflict of interest.
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Aviatsionnaya Tekhnika, 2023, No. 4, pp. 189 – 194.
Publisher’s Note. Pleiades Publishing remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Egorova, E.I., Kurylev, D.V. Modeling the Technological Process of the “Cup” Part in UML Language. Russ. Aeronaut. 66, 864–870 (2023). https://doi.org/10.3103/S1068799823040281
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068799823040281