Abstract
An effective mathematical model is proposed to describe experiments on the indentation of samples with layered or functionally graded coatings. The model is based on the elastic contact problem corresponding to the penetration of a punch in a coated elastic half-space. A Berkovich indenter is considered. The results of the simulation and the experiments are compared for the indentation of two zirconium nitride (ZrN) coatings on substrates of monocrystalline (100) silicon and annealed copper. The agreement of the results is good.
Similar content being viewed by others
References
Golovin, Yu.I., Nanoindentirovanie i ego vozmozhnosti (Nanoindentation and Its Capabilities), Moscow: Mashinostroenie, 2009.
Oliver, W.C. and Pharr, G.M., An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res., 1992, vol. 7, no. 6, pp. 1564–1583.
Vasiliev, A.S., Volkov, S.S., Belov, A.A., et al., Indentation of a hard transversely isotropic functionally graded coating by a conical indenter, Int. J. Eng. Sci., 2017, vol. 112, pp. 63–75.
Samsonov, G.V., Handbook of the Physicochemical Properties of the Elements, New York: Springer–Verlag, 1968.
Eom, K., Simulations in Nanobiotechnology, Boca Raton: CRC Press, 2011.
Perry, A.J., Schaffer, J.P., Brunner, J., and Sproul, W.D., A study of the picostructure of sputtered ZrN films, Surf. Coat. Technol., 1991, vol. 49, nos. 1–3, pp. 188–193.
Aizikovich, S.M., Vasil’ev, A.S., and Volkov, S.S., The axisymmetric contact problem of the indentation of a conical punch into a half–space with a coating inhomogeneous in depth, J. Appl. Math. Mech., 2015, vol. 79, no. 5, pp. 500–505.
Sneddon, I.N., Fourier Transforms, New York: McGraw–Hill, 1951.
Grishkevich, A.A., Chaevskii, V.V., Rapovets, V.V., and Garanin, V.N., Efficiency of application of ZrN–coatings on steel knives of the milling chipper–canters when cutting of wood, Trudy XI mezhdunarodnogo evraziiskogo simpoziuma “Derevoobrabotka: tekhnologii, oborudovanie, menedzhment XXI veka” (Proc. XI Int. Eurasian Symp. “Woodworking: Technologies, Equipment, and Management in 21st Century”), Yekaterinburg, 2016, pp. 191–196.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.S. Vasiliev, E.V. Sadyrin, B.I. Mitrin, S.M. Aizikovich, A.L. Nikolaev, 2018, published in STIN, 2018, No. 3, pp. 34–36.
About this article
Cite this article
Vasiliev, A.S., Sadyrin, E.V., Mitrin, B.I. et al. Nanoindentation of ZrN Coatings on Silicon and Copper Substrates. Russ. Engin. Res. 38, 735–737 (2018). https://doi.org/10.3103/S1068798X18090289
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18090289