Abstract
The historical retrospective of the works carried out by the Ruselprom concern in the field of improving the energy and operational characteristics of ANE(M)225L4UKhL2 electric motors used in the drives of auxiliary mechanisms—fans and compressors of VL80 and VL85 electric locomotives—is considered. Further prospects for improving the energy efficiency of motors are shown. The main results of the development of electric motors with a random winding made of round-section wire with polyimide film insulation laid in semiclosed slots of the stator are presented.
REFERENCES
Tushkanov, B.A., Pushkarev, N.G., Pozdnyakova, L.A., et al., Elektrovoz VL80. Rukovodstvo po ekspluatatsii (Electric Locomotive VL80. Operation Manual), Moscow: Transport, 1992.
Galdin, A.Yu., Zakharov, A.V., and Kruglikov, O.V., Analysis of tests of auxiliary machines with inductive-capacitive converter in the circuit of electric locomotives VL80, VL85, Materialy XVI Mezhdunar. konf. Elektromekhanika, Elektrotekhnologii, Elektrotekhnicheskie Materialy i Komponenty (Proc. 16th Int. Conf. on Electromechanics, Electrotechnologies, Electric Materials and Components), Moscow: 2020.
Nekrasov, O.A. and Rutshtein, A.M., Vspomogatel’nye mashiny elektrovozov peremennogo toka (Auxiliary Machines of Alternating Current Electric Locomotives), Moscow: Transport, 1988.
Kobelev, A.S. and Makarov, L.N., Comparison of electromechanical characteristics of induction motors with windings of “hard” and “soft” sections, Trudy Mezhdunar. XV nauchno-tekhnich. konf. Elektroprivody peremennogo toka (Proc. 15th Int. Sci. and Tech. Conf. on AC Electric Drives), Ekaterinburg: 2012.
Zakharov, A., Kobelev, A., Makarov, L., and Skitovich, S., Research, development, manufacturing and application of energy efficient electric motors, 2018 X Int. Conf. on Electrical Power Drive Systems (ICEPDS), Novocherkassk, 2018, IEEE, 2018, vol. 1, pp. 1–6. https://doi.org/10.1109/icepds.2018.8571692
User’s Guide—Maxwell 2D. http://ansoft-maxwell.narod.ru/en/CompleteMaxwell2D_V15.pdf.
Sabonnadière, J.-C. and Coulomb, J.-L., Finite Element Methods in CAD: Electrical and Magnetic Fields, New York: Springer, 1987. https://doi.org/10.1007/978-1-4684-8739-8
Danilevich, Ya.B. and Kasharskii, E.G., Dobavochnye poteri v elektricheskikh mashinakh (Additive Losses in Electric Machines), Moscow: Gosenergoizdat, 1963.
Heller, B. and Hamata, V., Pridavna pole, sily a ztraty v asynchronnim stroji, Praha: 1961.
Funding
This work was supported by ongoing LLC Ruselprom Management funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by Sh. Galyaltdinov
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Bedeker, A.A., Zakharov, A.V., Kalinin, V.Y. et al. Prospects for the Use of a New Modification of the ANE225L4 Electric Motor with a Random Winding Made of Round Wire in Electric Drives of Auxiliary Mechanisms of the VL85 Electric Locomotive. Russ. Electr. Engin. 95, 27–32 (2024). https://doi.org/10.3103/S1068371224010048
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068371224010048