Abstract
The structure, contents, and operations of electrical equipment, which are parts of a test bench for investigating the characteristics of technological electron guns, are reviewed. A list is given of critical problems that were solved with the equipment under which the basic requirements for system control and data acquisition were designed. Based on the classification of the control and recorded signals, the characteristics of input–output modules of digital and analog signals are defined. Taking into account the features of the equipment, standardized circuit solutions were developed that provide acceptable accuracy for control and signaling, as well as trouble-free operation of a computerized data acquisition system. The use of modem solutions providing galvanic insulation by optical transmission channel technology for both digital and analog signals is discussed. A method of selection of specialized microchips on the parameters of control and measurement signals is shown. Recommendations on the use of measuring complex for research and design of control systems of electron-beam welding installations are provided.
Similar content being viewed by others
References
Hanmin Ye and Xiaofei Liu, The design of computer integrated control system for electron beam welder, Appl. Mech. Mater., 2013, vol. 380-384, pp. 274–277.
Shestakova, E.A., Shaikhutdinova, E.F., Yanbaev, R.M., and Yanbaev, F.M., Selective sintering technologies for aviation engineering, Polzunovskii Al’manakh, 2014, no. 2, pp. 21–24.
Gladkov, E.A., Upravlenie protsessami i oborudovaniem pri svarke (Processes and Devices Control under Welding), Moscow: Akademiya, 2006.
Gordeev, I., Electromechanical stabilizer of line voltage, Radio, 2012, no. 4, pp. 21–23.
Zhigarev, A.A., Elektronnaya optika i elektronnoluchevye pribory. Ucheb. dlya vtuzov (Electron Optics and Electron-Beam Devices. Student’s Book for Universities), Moscow: Vysshaya shkola, 1972.
Bakish, R., Introduction to Electron Beam Technology, New York: John Wiley & Sons, 1985.
Xiaodong, Z., Junjun, H., and Chunlei, S., An approach of micro-stepping control for the step motors based on FPGA, Proc. IEEE Int. Conf. on Industrial Technology (ICIT’05), Hong Kong, Dec. 5, 2005, pp. 125–130.
PCI-1710/1710L/1710HG/1710HGL/1711/1711L/ 1716/1716L PCI card. User Manual, Advantech Co. Ltd., 2003.
PCI-172316-bit, 8-ch., Non-Isolated Analog Output Card. User Manual, Advantech Co. Ltd., 2011.
PCI-1714UL10 MS/s Simultaneous4-ch Analog Input Cardwith Universal PCI. User Manual, Advantech Co. Ltd, 2005.
USB-4750. 32-Channel Isolated Digital I/O USB Module. User Manual, Advantech Co. Ltd., 2009.
K293KP11BP. Dvunapravlennoe moshchnoe MOP-rele 400V/0.7A: Tekhnicheskoe opisanie (K293KP11BP. Two-Directional Powerful Metal Oxide Semiconductor Relay 400V/0.7A: Technical Description), Orel: PROTON CJSC, 2008.
35W Single Output Power Supply NES 35 Series. Specification, Mean Well Corporation, 2012.
Frolov, E.S., Minaichev, V.E., and Aleksandrova, A.T., Vakuumnaya tekhnika. Spravochnik (Vacuum Engineering. Handbook), Moscow: Mashinostroenie, 1992.
HCPL-7840. Isolation Amplifier. Datasheet, Avago Technologies Ltd., 2008.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Shcherbakov, V.P. Rubtsov, A.S. Kozhechenko, M.V. Ivashchenko, 2016, published in Elektrotekhnika, 2016, No. 6, pp. 45–52.
About this article
Cite this article
Shcherbakov, A.V., Rubtsov, V.P., Kozhechenko, A.S. et al. Development of standardized circuit solutions for control and data acquisition systems of a research complex on the basis of electron-beam technological installations. Russ. Electr. Engin. 87, 340–346 (2016). https://doi.org/10.3103/S1068371216060079
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068371216060079