Abstract
A contact system is a nonredundant technical structure of electric railways that should provide uninterrupted power supply for railway vehicles. The failure of one part can lead to failure of the contact system. About 20% of damage to contact systems is due to inadmissibly high temperature at part of an overheated catenary. In this paper, normative indices are analyzed to determine the state of the terminal under operating conditions. The existing methods of thermal control are unable to determine the current heat state of an electric bolted connection with required accuracy. Heating control of electrical connections is suggested. To determine the state of the electrical connection, the factor of defectiveness due to heating is selected. As a result, criteria for determining the state of an electrical connection are obtained, which allows a methodology to be developed for monitoring the quality of an electrical connection.
Similar content being viewed by others
References
Analiz proizvodstvenno-khozyaistvennoi deyatel’nosti khozyaistva elektrifikatsii i elektrosnabzheniya za 2010, 2011, 2012, 2013, 2014 gg. (Analysis of IndustrialOperational Activity of Electrification and Energy Supply Industry for 2010, 2011, 2012, 2013, 2014), Moscow: Electrification and Power Supply Department of the Russian Railways, 2010, 2011, 2012, 2013, 2014.
Ignatenko, I.V. and Vlasenko, S.A., Problems on determining electrical connection quality, Transport Aziatsko-Tikhookeansk. Regiona, 2015, no. 1 (2, 3).
Grigor’ev, V.L. and Ignat’ev, V.V., Teplovye protsessy v ustroistvakh tyagovogo elektrosnabzheniya. Uchebnoe posobie dlya vuzov zh.-d. transporta (Heat Processes in Traction Power Supply Devices. Student’s Book for Railway Universities), Moscow: Uchebno-metodich. tsentr po obrazovaniyu na zheleznodorozhnom transporte, 2007.
Ignatenko, I.V., The way to increase exploitation reliability of current-conducting clamps for electrified railway contact network, Cand. Sci. (Techn.) Dissertation, Far Eastern State Transport Univ., 2009.
Li, V.N., Ignatenko, I.V., and Slobodenyuk, A.S., The way to simulate heating and heat emission process for junction elements of traction network, Vestn. Vseross. Nauch.-Issl. Inst. Zheleznodorozhn. Transporta: Nauch.Tekhn. Zh., 2010, no. 4.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.V. Ignatenko, S.A. Vlasenko, 2016, published in Elektrotekhnika, 2016, No. 2, pp. 9–11.
About this article
Cite this article
Ignatenko, I.V., Vlasenko, S.A. Determination of criteria to find the quality of an electrical connection. Russ. Electr. Engin. 87, 65–67 (2016). https://doi.org/10.3103/S1068371216020085
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068371216020085