Skip to main content
SpringerLink
Log in

The Effect of Charge Grit on Impact Strength and Damping Characteristics of BN–Al Composite Materials

  • TOOLS, POWDERS, PASTES
  • Published:
Journal of Superhard Materials Aims and scope Submit manuscript

Abstract—The dependence of the impact strength and damping characteristics of сBN–Al composite materials on the specific surface (grain size) of cubic boron nitride powders has been investigated. The correlation between the damping characteristics of the composite material and its phase composition has been established. The dependence of the phase composition of the material on the specific surface of the powdered cBN component has been demonstrated. Composite materials with a biphasic structure and the highest density and hardness possible for this structure had the maximal impact strength.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.
Fig. 6.
Fig. 7.
Fig. 8.
Fig. 9.

Similar content being viewed by others

REFERENCES

  1. Shul’zhenko, A.A., Bozhko, S.A., Sokolov, A.N., et al., Sintez, spekanie i svoistva kubicheskogo nitrida bora (Synthesis, Sintering, and Properties of Cubic Boron Nitride), Kiev: Naukova Dumka, 1993.

  2. Barry, J., Akdogan, G., Smyth, P., McAvinue, F., and O’Halloran, P., Application areas for PCBN materials, Ind. Diamond Rev., 2006, vol. 66, no. 3, pp. 46–53.

    Google Scholar 

  3. Sverkhtverdye materialy. Poluchenie i svoistva (Superhard Materials: Production and Use), vol. 5: Obrabotka materialov lezviinym instrumentom (Material Processing by Blade Tools), Novikov, N.V., Ed., Kyiv: Ins. Sverkhtverd. Mater. im. V.N. Bakulya, 2006.

  4. Bezhenar, M.P., Physicochemical interaction during sintering of cubic boron nitride with aluminum at high pressure, Sverkhtverd. Mater., 1999, no. 2, pp. 4–11.

  5. Sverkhtverdye materialy. Poluchenie i svoistva (Superhard Materials: Production and Use), vol. 1: Sintez almaza i podobnykh materialov (Synthesis of Diamond and Similar Materials), Novikov, N.V., Ed., Kyiv: Ins. Sverkhtverd. Mater. im. V.N. Bakulya, 2003.

  6. Benko, E., Morgiel, J., and Czeppe, T., BN sintered with Al: Microstructure and hardness, Ceram. Int., 1997, vol. 23, no. 1, pp. 89–91.

    Article  CAS  Google Scholar 

  7. McKie, A. Winzer, J., Sigalas, I., Herrmann, M., Weiler, L., and Rödel, J., Mechanical properties of cBN–Al composite materials, Ceram. Int., 2011, vol. 37, no. 1, pp. 1–8.

    Article  CAS  Google Scholar 

  8. Devin, L.N., Determination of the physicomechanical characteristics of brittle materials on small samples, Probl. Mitsn., 2018, no. 6, pp. 99–109.

  9. Devin, L.N., Determination of maximum tensile strength of polycrystalline superhard materials, Sverkhtverd. Mater., 1988, no. 2, pp. 24–28.

  10. Devin, L.N., Naidenko, A.G., and Nimchenko, T.V., UA Patent 23804, Byull. Izobret., 2007, no. 8.

  11. Devin, L.N., Stakhniv, N.E., and Sulima, A.G., Automated system for measuring the acoustic emission signal during precision diamond turning, Materialy Mezhdunarodnogo nauchno-tekhnicheskogoseminara “Sovremennye problemy proizvodstva i remonta v promyshlennosti i na transporte,” g. Svalyava, Karpaty, 21–25 fevralya 2011 g. (Proc. Int. Sci.-Tech. Seminar “Modern Problems in Production and Reparation in Industry and Transport,” Svalyava, Carpathian, February 21–25, 2011), Kyiv: Assots. Tekhnol. Mashinostr. Ukr., 2011, pp. 79–81.

  12. Glagovskii, B.A., Roishtein, G.Sh., and Yashin, V.A., Kontrol’no-izmeritel’nye pribory i osnovy avtomatizatsii proizvodstva abrazivnykh instrumentov (Control-Measurement Devices and Principles of Automated Manufacturing of Abrasive Tools), Leningrad: Mashinostroenie, 1980.

  13. Glagovskii, B.A. and Chofnus, E.G., Frequency control of self oscillations of constructions, Izmerit. Tekh., 1966, no. 3, pp. 38–44.

  14. Devin, L.M., Bondarenko, V.P., Osadchyi, O.A., and Nimchenko, T.V., Application of acoustic methods for the monitoring of products made of hard alloys, Mater. Sci., 2009, vol. 45, no. 3, pp. 392–398.

    Article  CAS  Google Scholar 

  15. Baranov, V.M., Determination of elasticity constants of the dick-like material samples, Zavod. Lab., 1972, no. 9, pp. 1120–1124.

  16. Bezhenar, N.P., Konoval, S.M., Bozhko, S.A., Belyavina, N.N., and Markiv, V.Ya., Reaction interaction in cBN–Al system at high pressure, Fiz. Tekh. Vys. Davlenii, 2009, vol. 19, no. 2, pp. 41–47.

    CAS  Google Scholar 

  17. Bezhenar, N.P., Bozhko, S.A., Belyavina, N.N., Markiv, V.Ya., and Nagornyi, P.A., Phase composition of polycrystals obtained by reactive sintering of cubic boron nitride with aluminum, Sverkhtverd. Mater., 2002, no. 1, pp. 37–48.

  18. Konoval, S.M. and Bezhenar, M.P., Structural heterogenity of superhard composites of the cBN–Al system, in Sintez, spekanie i svoistva sverkhtverdykh materialov (Synthesis, Sintering, and Properties of Superhard Materials), Kyiv: Logos, 2010, pp. 107–112.

  19. Konoval, S.M., Garbuz, T.O., Bezhenar, M.P., Bozhko, S.A., and Nagornii, P.A., Simulation of the porous and grain structure during two-stage sintering of superhard PCBN cBN-Al and cBN–TiB2(TiN)–Al systems, in Porodorazrushayushchii i metalloobrabatyvayushchii instrument—tekhnika i tekhnologiya ego izgotovleniya i primeneniya (Mineral Destructing and Metal Processing Tools: Production Technique and Use), Kyiv: Ins. Sverkhtverd. Mater. im. V.N. Bakulya, 2008, no. 11, pp. 180–188.

Download references

Author information

Authors and Affiliations

  1. Bakul Institute for Superhard Materials, National Academy of Sciences of Ukraine, 04074, Kyiv, Ukraine

    L. N. Devin, M. P. Bezhenar, S. V. Rychev & Ya. M. Romanenko

Authors
  1. L. N. Devin
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. M. P. Bezhenar
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. V. Rychev
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Ya. M. Romanenko
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to L. N. Devin.

Additional information

Translated by S. Semenova

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Devin, L.N., Bezhenar, M.P., Rychev, S.V. et al. The Effect of Charge Grit on Impact Strength and Damping Characteristics of BN–Al Composite Materials. J. Superhard Mater. 42, 190–198 (2020). https://doi.org/10.3103/S1063457620030041

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S1063457620030041

Keywords:

Search

Navigation