Abstract
The influence of the cutting parameters and insert geometry on the inclination of the conditional shear plane is studied, analytically and by the finite-element method, in the turning of Niresist iron. The corresponding formulas are derived.
Similar content being viewed by others
REFERENCES
Silin, S.S., Teoriya podobiya v prilozhenii k tekhnologii mahsinostroeniya: Uchebnoe posobie (Resemblance Theory in Machine Engineering Technology: Manual), Yaroslavl: Yarosl. Politekh. Inst., 1989.
ISCAR Metalworking: Main Catalogue, Migdal, 2005.
Kennametal: Lathe Tooling Catalog, Latrobe, 2005.
Sandvik Coromant: Metal Cutting Tool: Main Catalogue, Sandviken, 2007.
Rozenberg, A.M. and Eremin, A.N., Elementy teorii protsessa rezaniya metallov (Elements of the Metal Cutting Theory), Moscow: Mashgiz, 1956.
Zorev, N.N., Voprosy mekhaniki protsessa rezaniya metallov (Mechanics of Metal Cutting), Moscow: Mashgiz, 1956.
Rozenberg, Yu.A., Diagram of the formation of elemental chips during cutting of low-plastic metals, in Vysokoproizvoditel’noe rezanie v mashinostroenii (High-Performance Cutting in Machine Engineering), Moscow: Nauka, 1966, pp. 108–113.
ACKNOWLEDGMENTS
Financial support was provided by the Russian Ministry of Education and Science (contract 02.G25.31.0016) within the framework of Russian government decree 218 regarding state support for cooperation between Russian universities in developing high-tech production.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Tarasov, S.V., Svirshchev, V.I. Influence of Turning Conditions on the Shear for Niresist Iron. Russ. Engin. Res. 39, 342–344 (2019). https://doi.org/10.3103/S1068798X19040166
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19040166