Abstract
Assessment of thermal phenomena in the drilling of laminates is critical in printed-circuit production. A quasi-determinate model permits calculation of the expected temperature in the cutting zone during the drilling of small mounting sockets and pass-through holes, with consequent decrease in manufacturing waste.
Similar content being viewed by others
REFERENCES
Vantsov, S.V., Medvedev, A.M., Maung Maung, Z., and Khomutskaya, O.V., The reliability of the drilling of printed circuit boards: the concept of failure, Elektron.: Nauka, Tekhnol., Biz., 2016, no. 8, pp. 168–188.
Pavlov, P.P. and Khokhlov, A.F., Fizika tverdogo tela (Physics of Solids), Moscow: Vysshaya Shkola, 2000, 3rd ed.
Rudnev, A.V., Obrabotka rezaniem stekloplastikov (Cutting of Fibreglasses), Moscow: Mashinostroenie, 1969.
Bulovskii, P.I., Mekhanicheskaya obrabotka stekloplastikov (Mechanical Processing of Fibreglasses), Leningrad: Mashinostroenie, 1969.
Lykov, N.V., Teoriya teploprovodnosti (Theory of Heat Conductivity), Moscow: Vysshaya Shkola, 1967.
Reznikov, A.N., Teplofizika rezaniya (Thermal Physics of Cutting), Moscow: Mashinostroenie, 1969.
Medvedev, A.M., Prospective material for the manufacture of printed circuit boards for microwave devices, Elektron.: Nauka, Tekhnol., Biz., 2017, no. 5 (165), pp. 184–187.
Medvedev, A.M., Solderability of finishing coatings of printed circuit boards, Elektron.: Nauka, Tekhnol., Biz., 2017, no. 8 (169), pp. 184–188.
Novikov, S.V., Innovative methods for work process design in a high technology enterprise, Russ. J. Agric. Soc.-Econ. Sci., 2017, vol. 68, no. 8, pp. 114–117.
Zamkovoi, A.A. and Novikov, S.V., The organization of the labor process in high-tech industries, Sovrem. Uch., 2017, no. 2, pp. 63–66.
Sorokin, A.E., Novikov, S.V., and Zamkovoi, A.A., Innovation and technology management in the organization of high-tech industry, Innovatsii, 2016, no. 10 (216), pp. 132–136.
Medvedev, A.M. and Mylov, G.V., Designing high-density compounds in avionics, Avtom. Sovrem. Tekhnol., 2017, vol. 71, no. 1, pp. 27–32.
Novikov, S.V., Strategic analysis of the development of high-technology manufacturing facilities, Russ. Eng. Res., 2018, vol. 38, no. 3, pp. 198–200.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Vantsov, S.V., Vasil’ev, F.V., Medvedev, A.M. et al. Quasi-Determinate Model of Thermal Phenomena in Drilling Laminates. Russ. Engin. Res. 38, 1074–1076 (2018). https://doi.org/10.3103/S1068798X18120316
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18120316