Abstract
Methods of thermal and thermomechanical treatment of titanium alloys are outlined, along with the corresponding temperature and deformation conditions. Means of cost reduction in the manufacture of various structures from these alloys are proposed, along with means of improving the reliability.
Similar content being viewed by others
References
Khorev, A.I., Kompleksnoe legirovanie i thermomekhanicheskaya obrabotka titanovykh splavov (Complex Alloying and Thermomechanical Treatment of Titanium Alloys), Moscow: Mashinostroenie, 1979.
Khorev, A.I., Sovremennye metody povysheniya konstruktsionnoi prochnosti titanovykh splavov (Modern Methods of Increasing the Structural Strength of Titanium Alloys), Moscow: Voenizdat, 1979.
Khorev, A.I., Opyt primneneniya titanovykh splavov v narodnom khozyaistve (Experience in the Practical Use of Titanium Alloys), Moscow: TsNIITEMS, 1977.
Khorev, A.I., Povyshenie konstruktsionnoi prochnosti termicheski uprochnyaemykh titanovykh splavov (Increasing the Structural Strength of Thermally Hardenable Titanium Alloys), Moscow: ONTI VIAM, 1965.
Khorev, A.I., Kompleksnoe legirovanie, termicheskaya i thermomekhanicheskaya obrabotka svarivaemykh titanovykh splavov (Complex Alloying and Thermal, and Thermomechanical Treatment of Weldable Titanium Alloys), Moscow: ONTI VIAM, 1979.
Belov, S.P., Khorev, A.I., Khorev, M.A., et al., Metallovedenie titana i ego splavov (Physical Metallurgy of Titanium and Its Alloys), Moscow: Metallurgiya, 1992.
Khorev, A.I., Developing Theoretical and Practical Principles for Increasing the Structural Strength of Titanium Alloys by Complex Alloying and Microalloying, Ti-2007 v SNG (Titanium in the Commonwealth of Independent States in 2007), Moscow, 2007, pp. 226–234.
Khorev, A.I., Developing Theoretical and Practical Principles for Increasing the Structural Strength of Titanium Alloys by Thermal, and Thermomechanical Treatment and Textural Hardening, Ti-2007 v SNG (Titanium in the Commonwealth of Independent States in 2007), Moscow, 2007, pp. 423–430.
Khorev, A.I., Influence of Complex Alloying on the Mechanical Properties of the Weld Joints and Basic Metal in α + β and β Titanium Alloys, Tekhnol. Mashinostr., 2007, no. 2, pp. 29–34.
Khorev, A.I., Developing Theoretical and Practical Principles for Increasing for Producing High and Superhigh Structural Strength in Promising Titanium Alloys, Ti-2008 v SNG (Titanium in the Commonwealth of Independent States in 2008), Moscow, 2008, pp. 248–261.
Khorev, M.A. and Khorev, A.I., Titanium Alloys: Their Use and Development, Materialovedenie, 2005, no. 7, pp. 25–34.
Khorev, A.I., Titanium Alloys for the Aerospace Industry and Their Prospects for Development, Aviatsionnye materialy i tekhnologii (Aviation Materials and Technology), Moscow: 2002, pp. 11–32.
Khorev, A.I., Titanium for High-Speed Aviation and Aeronautics, Tekhnol. Legk. Splavov, 2002, no. 4, pp. 92–97.
Khorev, A.I., Mechanical Properties of Weld Joints in α + β and β Titanium Alloys, Tsvetn. Met., 2006, no. 1, pp. 77–83.
Khorev, A.I., VT23 Titanium Alloy and Its Comparison with Superior Imported Alloys, Titan, 2006, no. 1(18), pp. 47–52.
Khorev, M.A., Strukturno-fazovoe sostoyanie i nadezhnost’ svarnykh soedinenii titanovykh splavov (Structural-Phase State and Reliability of the Weld Joints of Titanium Alloys), Moscow: NPO VIAM, 1991.
Khorev, A.I., Development of Titanium Alloys by Complex Alloying, Fiz.-Khim. Mekhan. Mater., 2006, vol. 42, no. 5, pp. 45–50.
Author information
Authors and Affiliations
Additional information
Original Russian Text © A.I. Khorev, 2011, published in Vestnik Mashinostroeniya, 2011, No. 12, pp. 66–71.
About this article
Cite this article
Khorev, A.I. Thermal and thermomechanical treatment of titanium alloys. Russ. Engin. Res. 31, 1227–1232 (2011). https://doi.org/10.3103/S1068798X1112015X
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X1112015X