Abstract
The formation of an alloyed layer on steel 35 by VK8 hard alloy with added Al2O3 increases its wear resistance. Effective conditions for this process are determined. The formation of regular tungsten-carbide nanostructure is observed.
Similar content being viewed by others
References
Nikolenko, S.V. and Verkhoturov, A.D., Novye elektrodnye materialy (New Electrode Materials), Vladivostok: Dal’nauka, 2005.
Nikolenko, S.V., Verkhoturov, A.D., Dvornik, M.I., et al., Using Al2O3 Nanopowder as a Grain-Growth Inhibitor in VK8 alloy, Vopr. Materialov., 2008, no. 2 (34), pp. 100–105.
Pyachin, S.A., Zavodinskii, V.G., Kuz’menko, A.P., et al., Surface Structuring of Copper under the Action of an Electrical Discharge, Pis’ma ZhTF, 2010, no. 36 (14), pp. 34–40.
Russian Patent 2009123390/02 (033 234).
Namitokok, K.K., Elektroerozionnye yavleniya (Electroerosional Phenomena), Moscow: Energiya, 1978.
Kolgachev, A.E., Panin, S.V., Pochivalov, Yu.I., and Antipina, N.A., Influence of Preliminary Nanostructuring of the Surface Layer on the Wear Resistance of VT6 Titanium Alloys Subjected to Chemical and Thermal Treatment, Izv. Tomsk. Politekhn. Univ., 2006, vol. 309, no. 2, pp. 144–148.
Zhang, S., Xie, H., Hing, P., and Mo, Z., Adhesion and Raman Studies of Magnetron Sputtered Amorphous Carbon on WC-Co, Surf. Eng., 1999, vol. 15, no. 4, pp. 341–346.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.V. Nikolenko, 2011, published in Vestnik Mashinostroeniya, 2011, No. 6, pp. 47–51.
About this article
Cite this article
Nikolenko, S.V. Surface nanostructuring of steel 35 by electrospark machining with electrodes based on tungsten carbide and added Al2O3 nanopowder. Russ. Engin. Res. 31, 556–561 (2011). https://doi.org/10.3103/S1068798X11060189
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X11060189