Abstract
Internal stresses σ0, friction coefficients fand microhardness were measured in diamond-like coatings obtained by vacuum-arc sputtering of carbon target at different nitrogen pressures in a work chamber during deposition on metallic substrates. The dependence of these parameters on nitrogen concentration in coatings can be used in practical deposition of strengthening and friction coatings for improvement of their tribological properties. The correlation between mechanical properties of diamond-like and CN x coatings was established.
Similar content being viewed by others
References
Lifshitz, Y., Diamond-like Carbon—Present Status, Diamond Relat. Mater., 1999, vol. 8, pp. 1659–1676.
Arbuzov, V.L., Vladimirov, A.B., Vykhodets V.B., et al. Practical Use of Strength and Anticorrosion Properties of Amorphous Carbon Thin Films, ibid., 1994, vol. 3, pp. 775–778.
Trakhtenberg, I.Sh., Vykhodets, V.B., Arbuzov V.L., et al., DLC Coating for Video Head, ibid., 1999, vol. 8, pp. 1770–1775.
Vladimirov, A.B., Trakhtenberg, I., Sh., Rubshtein A.P., et al. The Effect of Substrate and DLC Morphology on the Coating Tribological Properties, ibid., 2000, vol. 9, pp. 838–842.
Trakhtenberg, I.Sh., Vladimirov, A.B., Rubstein A.P., et al., The Analysis of Microhardness Measurement Approach for Characterization of Hard Coatings, ibid., 2003, vol. 12, pp. 1788–1792.
Trakhtenberg, I.Sh., Vladimirov, A.B., Rubshtein, A.P., et al., Effect of Adhesion Strength of DLC to Steel on the Coating Erosion Mechanism, ibid., 2001, vol. 10, pp. 1824–1828.
Kleinsorge, B., Ferrari, A.C., Robertson, J., et al., Bonding Regimes of Nitrogen in Amorphous Carbon, ibid., 2000, vol. 9, pp. 643–648.
Aksenov, I.I. and Strel’nitsky, V.E., Vacuum-Arc Discharge as an Instrument for PVD Process of DLC Films Deposition, Proc. of the 5th International Symposium on Diamond Films and Films of Related Materials (ISDF-5), Kharkiv, Ukraine, 22–27 Apr., 2002, pp. 39–64.
Lifshitz, Y., Lempert, G.D., Grossman, E., et al., Growth Mechanisms of DLC Films from C+ Ions: Experimental Studies, ibid., 1995, vol. 4, pp. 318–323.
Weiler, M., Robertson, J., and Sattel, S., Formation of Highly Tetrahedral Amorphous Hydrogenated Carbon, taC:H. ibid., 1995, vol. 4, pp. 268–271.
Yamamoto, K., Wazumi, K., Watanabe, T., et al., Tribological Properties of Diamond-like Carbon Films Prepared by Mass-Separated Ion Beam Deposition, ibid., 2000, vol. 11, pp. 1130–1134.
Rubshtein, A.P., Trakhtenberg, I.Sh., Yugov, V.A., et al., Effect of Temperature and Ion Bombardment on DLC Relief Generation and Modification, Proc. of the 7th Applied Diamond Conf./3rd Frontier Carbon Technology Join Conf. (ADC/FCT), Tsukuba, Japan, 18 Aug., 2003, pp. 472–477.
Hamon, A.L., Marraud, A., and Jouffrey, B.A., A Geometrical Study of Single-walled Nanotube Ropes by Transmission Electron Microscopy, Phil. Mag. B., 2001, vol. 81, pp. 1779–1799.
Yu, K.M., Choen, M.L., Haller, E.E., et al., Observation of Crystalline C3N4, Phys. Rev. B. 1994, vol. 49, pp. 5034–5037.
Merel, P., Tobbal, M., Chaker, M., Phase Segregation in Pulsed Laser Deposited Carbon Nitride Thin Films, Diamond Relat. Mater., 2003, vol. 12, pp. 1075–1078.
Author information
Authors and Affiliations
Additional information
Original Russian Text © I.Sh. Trakhtenberg, A.B. Vladimirov, A.P. Rubstein, V.A. Yugov, V.B. Vykhodets, T.E. Kurennykh, A.G. Gontar, V.N. Tkach, S.N. Dub, K. Uemura, 2007, published in Sverkhtverdye Materialy, 2007, Vol. 29, No. 3, pp. 15–19.
About this article
Cite this article
Trakhtenberg, I.S., Vladimirov, A.B., Rubstein, A.P. et al. Mechanical properties of CN x coatings obtained by carbon arc sputtering. J. Superhard Mater. 29, 138–141 (2007). https://doi.org/10.3103/S1063457607030045
Issue Date:
DOI: https://doi.org/10.3103/S1063457607030045