Abstract
Ti-Ti and Ti-NiAl joints were obtained by thermal explosion in the Ti-Ni-Al system. The bulk Ti samples used as a substrate were preliminary coated with mechanically activated Ni-Al powders by the method of mechanical cold working. The Ti-Ti joints were found to have the Ni x Al y Ti z composition and lower porosity compared to that of Ti-NiAl joints.
Similar content being viewed by others
References
Sopousek, J. and Foret, R., More Sophisticated thermodynamic designs of welds between dissimilar steels, Sci. Technol. Welding Joining, 2008, vol. 13, no. 1, pp. 17–24.
Zlamal, B., Foret, R., Bursik, J., and Svoboda, M., Microstructural stability of dissimilar weld joint of creep-resistant steels with increased content at 500–900°C, Defect Diffus. Forum, 2007, vol. 263, no. 2, pp. 195–200.
Bravo, I., Zepeda, C., Hernandez, A., and Piedras, E., Dissimilar welding of superduplex stainless steel/HSLA steel for offshore applications joined by GTAW, Engineering, 2010, vol. 2, no. 7, pp. 520–528.
Shcherbakov, V.A., Sytschev, A.E., and Sachkova, N.V., Interaction of SHS-produced melt with a Ti surface in microgravity conditions, Int. J. SHS, 2010, vol. 19, no. 2, pp. 141–149.
Shcherbakov, V.A. and Shteinberg, A.S., SHS welding of refractory materials, Int. J. SHS, 1993, vol. 2, no. 4, pp. 357–369.
Uenishi, K., Sumi, H., and Kobayashi, K.F., Joining of the intermetallic compound TiAl using self-propagating high-temperature synthesis reaction, Z. Metallkd., 1995, vol. 86, no. 1, pp. 64–68.
Pascal, C., Marin-Ayral, R.M., and Tedenac, J.C., Joining of nickel monoaluminide to a superalloy substrate by high pressure self-propagating high-temperature synthesis, J. Alloys Compd., 2002, vol. 337, nos. 1–2, pp. 221–225.
Pascal, C., Marin-Ayral, R.M., Tedenac, J.C., and Merlet, C., Combustion synthesis: A new route for repair of gas turbine components: principles and metallurgical structure in the NiAl/RBD61/Superalloy Junction, Mater. Sci. Eng. A, 2003, vol. 341, nos. 1–2, pp. 144–151.
Mukasyan, A.S. and White, J.D., Combustion joining of refractory materials, Int. J. SHS, 2007, vol. 16, no. 3, pp. 154–168.
Cho, G.S., Yang, J.H., Choe, K.H., Lee, K.W., and Ikenaga, A., Effect of applied pressure on the joining of combustion synthesized Ni3Al intermetallics with Al alloy, J. Mater. Sci. Technol., 2008, vol. 24, no. 1, pp. 123–126.
Thompson, R.J., Zhao, J.-C., and Hemker K.J., Effect of ternary elements on a martensitic transformation in β-NiAl, Intermetallics, 2010, vol. 18, no. 5, pp. 796–802.
Sytschev, A.E., Vadchenko, S.G., Boyarchenko, O.D., Vrel, D., and Sachkova, N.V., SHS joining of intermetallics with metallic substrates, Int. J. SHS, 2011, vol. 20, no. 3, pp. 185–190.
Dong, Sh., Hou, P., Yang, H., and Zou, G., Synthesis of intermetallic NiAl by SHS reaction using coarse-grained nickel and ultrane-grained aluminum produced by wire electrical explosion, Intermetallics, 2002, vol. 10, no. 2, pp. 217–223.
Vadchenko, S.G., Kovalev, D.Yu., Sachkova, N.V., and Sytschev, A.E., Deposition of composite metallic coatings onto Al through mechanical impregnation followed by thermal treatment, Int. J. SHS, 2010, vol. 19, no. 3, pp. 178–185.
Kovalev, D.Yu., Kochetov, N.A., Ponomarev, V.I., and Mukasyan, A.S., Effect of mechanical activation on thermal explosion in Ni-Al mixtures, Int. J. SHS, 2010, vol. 19, no. 2, pp. 120–125.
Biswas, A., Roy, S.K., Gurumurthy, K.R., Prabhu, N., and Banerjee, S., A study of self-propagating high-temperature synthesis of NiAl in thermal explosion mode, Acta Mater., 2002, vol. 50, no. 4, pp. 757–773.
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Sytschev, A.E., Vadchenko, S.G., Boyarchenko, O.D. et al. SHS welding by thermal explosion: Ti-Ti and Ti-NiAl joints. Int. J Self-Propag. High-Temp. Synth. 22, 99–102 (2013). https://doi.org/10.3103/S106138621302009X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S106138621302009X