Abstract
A theoretical method is considered for the theoretical plotting of the fatigue curves for specimens with stress concentration using the results of tests for smooth samples. The method is based on the results of a large number of experimental data for each material (from 100 to 200 specimens for each level of stress concentration). The computed and experimental data proved to be in reasonable agreement.
Similar content being viewed by others
References
Servisen, S.V., Raschet na prochnosti pri napryazheniyakh, tsiklicheski izmenyayushchikhsya vo vremeni (Strength Calculation under Time Cyclic Stresses), Moscow: MATI, 1971.
Stepnov, M.N. and Giatsintov, E.V., Ustalost’ legkikh konstruktsionnykh splavov (Fatigue of Light Structure Alloys), Moscow: Mashinostroenie, 1973.
Haywood, R.B., Designing against Fatigue of Metals, New York: Reinhold Publ., 1962; Moscow: Mashinostroenie, 1969.
Kogaev, V.P., Raschety na prochnost’ pri napryazheniyakh, peremennykh vo vremeni (Strength Calculations under Time-Varied Stresses), Moscow: Mashinostroenie, 1993.
Stepnov, M.N., Chernyshev, S.L., Kovalev, I.E., et al., Kharakteristiki soprotivleniya ustalosti. Raschetnye metody (Fatigue-Proof Characteristics. Calculation Methods), Moscow: Izd. Tsentr “Tekhnologiya Mashinostroeniya,” 2010.
Stepnov, M.N., Veroyatnostnye metoly otsenki kharakteristik mekhanicheskikh svoistv materialov i nesushchei sposobnosti elementov konstruktsii (Probabilistic Methods for Estimating Mechanical Properties for Materials and Carrying Ability of Structure Elements), Novosibirsk: Nauka, 2005.
Author information
Authors and Affiliations
Additional information
Original Russian Text © M.N. Stepnov, A.C. Naumkin, 2012, published in Problemy Mashinostroeniya i Nadezhnosti Mashin, 2012, No. 1, pp. 16–26.
About this article
Cite this article
Stepnov, M.N., Naumkin, A.C. A computational and experimental method for plotting multicycle fatigue curves for structural elements with concentrated stress. J. Mach. Manuf. Reliab. 41, 34–38 (2012). https://doi.org/10.3103/S1052618812010177
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618812010177