Abstract
This work describes the testing of boride layers on Niresist Type One austenitic cast iron that are obtained after boriding at low temperatures (700°C). The study includes metallographic tests as well as X-ray structural phase analysis and electronic microscopy. According to the results of layer-by-layer X-ray structural phase analysis, FeB is determined as the main phase of the surface boride layer on Niresist Type One cast iron after a ten-hour boriding at 700°C. However, the phase that shows at a depth of 20 μm is Fe2B, whereas the phase that shows at a depth of 40 μm is the underlayer material phase known as γ-phase. In the near-surface part of the diffusion layer, electron microscopy detects a compound corresponding to iron boride Fe2B7 not detected by X-ray structural analysis.
REFERENCES
Ivanovskii, V.N., Pekin, S.S., and Sabirov, A.A., Ustanovki pogruzhnykh tsentrobezhnykh nasosov dlya dobychi nefti (Installations of Submerged Centrifugal Pumps for Oil Extraction), Moscow: Neft i Gaz, 2002.
Properties and applications of Ni-resist and ductile Ni‑resist alloys. https://nickelinstitute.org/media/1770/propertiesandapplicationsofni_resistandductileni_resistalloys_11018_.pdf.
Akopov, E.Yu., Substantiation and choice of methods for increasing the durability of submerged centrifugal pump, Cand. Sci. (Eng.) Dissertation, Moscow: 2016.
Chugun. Spravochnik (Cast Iron: Reference Book), Sherman, A.D. and Zhukov, A.A., Eds., Moscow: Metallurgiya, 1991.
ASTM A436–06. Standard specification for austenitic gray iron castings, 2006.
Girshovich, N.G., Spravochnik po chugunnomu lit’yu (Reference Book on Cast Iron Casting), Leningrad: Mashinostroenie, 1978, 3rd ed.
Slepchenko, S., Struggle for resource in complex conditions, Neftegazovaya Vertikal, 2008, no. 12, pp. 116–119.
Yakimov, S.B., Firsov, A.P., Gebel’, E.A., Ezhov, A.A., and Tsikh, S.G., Field test results of an electric submersible pump with borated-hardened working stages at the Van-Yeganskoye Field, Territoriya Neftegaz, 2020, vol. 7, no. 8, pp. 56–62.
Tsikh, S.G., Krasulya, A.A., Pomel’nikova, A.S., and Filimonov, A.V., Low-temperature liquid borating of Ni-resist cast iron, Uprochnyayushchie Tekhnol. Pokrytiya, 2020, no. 10, pp. 468–472. https://doi.org/10.36652/1813-1336-2020-16-10-468-472
Krukovich, M.G., Prusakov, B.A., and Sizov, I.G., Plastichnost’ borirovannykh sloev (Plasticity of Boronized Layers), Moscow: Fizmatlit, 2010; Cham: Springer, 2016. https://doi.org/10.1007/978-3-319-40012-9
Glukhov, V.P., Boridnye pokrytiya na zheleze i stalyakh (Boron Coatings on Iron and Steels), Kiev: Naukova Dumka, 1970.
Lyakhovich, L.S., Krukovich, M.G., Turov, Yu.V., and Kosachevskii, L.N., Recent direction of application of liquid boronizing for improving the durability of products, Ekspress-informatsiya BelNIINTI. Seriya: Metalloobrabotka (Express Information of BelNIINTI: Metal Treatment Series), Minsk: BelNIINTI, 1975.
Krukovich, M.G., Prusakov, B.A., and Sizov, I.G., Plasticity as the key to the durability of boronized layers, Plasticity of Boronized Layers, Springer Series in Materials Science, vol. 237, Cham: Springer, 2016, pp. 65–80. https://doi.org/10.1007/978-3-319-40012-9_6
Zhang, Y., Wan, B., Wu, L., Li, Z., Wang, Z., Zhang, J., Gou, H., and Gao, F., Revealing phase relations between Fe2B7 and FeB4 and hypothetical Fe2B7-type Ru2B7 and Os2B7: First-principles calculations, RSC Adv., 2017, vol. 7, pp. 44860–44866. https://doi.org/10.1039/C7RA08134K
Bykova, E., Gou, H., Bykov, M., Hanfland, M., Dubrovinsky, L., and Dubrovinskaia, N., Crystal structures and compressibility of novel iron borides Fe2B7 and Fe B50 synthesized at high pressure and high temperature, J. Solid State Chem., 2015, vol. 230, pp. 102–109. https://doi.org/10.1016/j.jssc.2015.06.040
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by S. Kuznetsov
About this article
Cite this article
Krasulya, A.A., Pomelnikova, A.S., Bazaleeva, K.O. et al. Structural Peculiarities of Niresist Grade Cast Iron after Boriding. Steel Transl. 53, 428–432 (2023). https://doi.org/10.3103/S0967091223050108
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091223050108