Abstract—Analysis of the smelting and casting of cylindrical ingots of Inconel 718 alloy produced in a vacuum induction furnace at PAO Ruspolimet shows that existing technology does not ensure the production of a dense ingot of the required quality on account of porosity in the axial zone and segregation of elements such as chromium, nickel, and niobium. The results show that the casting and solidification of the Inconel 718 ingots must be corrected so as to obtain high-quality dense ingots, without changing the basic features of the production process: a 3-t vacuum induction furnace, a ceramic lining based on aluminum oxide (Al2O3), a cylindrical mold for ingots of diameter 410 mm, and a mold of diameter 450 mm for vacuum-arc remelting. By means of Thermo-Calc software (2017a version), the solidus temperature for equilibrium solidification (1211°C) and nonequilibrium solidification (1091°C) are refined. On the basis of the results, by computer simulation of the casting processes, the casting rate is corrected by decreasing the diameter of the casting nozzle from 32 to 28 mm and the casting temperature from 1470 to 1460°C. A batch of ingots is produced by the corrected technology. Transverse templates are taken from such a sample to determine the chemical composition, and longitudinal sections are taken for metallographic analysis. Metallographic data indicate decrease in porosity of the ingot’s axial zone and decrease in the segregation. On the basis of the results, the introduction of appropriate changes in the casting technology is proposed. Computer simulation of the casting and solidification processes permits the development of a technology in which high-quality ingots are produced in the first step. All of the products meet the customer requirements.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
REFERENCES
Xiao, L., Chaturvedi, M.C., and Chen, D.L., Effect of boron on the low-cycle fatigue behavior and deformation structure of INCONEL 718 at 650°C, Metall. Mater. Trans. A, 2004, vol. 35, no. 1, pp. 3477–3487.
Eich, A., Franz, H., Scholz, H., Kemmer, H., and Brückmann, G., Gaseous treatment in vacuum induction degassing (VID) unit for low carbon alloys, Proc. 1st Int. Conf. on Ingot Casting, Rolling and Forging (ICRF 2012), Aachen, 2012, pp. 1–6.
Choudhury, A., Kemmer, H., Donachie, M., Donachie, S., and Erickson, G.L., Vacuum induction melting, in ASM Handbook, Vol. 15: Casting, Materials Park, OH: ASM Int., 2008, pp. 1–8.
Loria, E.A., Recent developments in the progress of Superalloy 718, JOM, 1992, vol. 44, no. 6, pp. 33–36.
Bartosinski, M., Magee, J.H., and Friedrich, B., Improving the chemical homogeneity of austenitic and martensitic stainless steels during nitrogen alloying in the pressure electro slag remelting (PESR) process. http:// www.metallurgie.rwthaachen.de/old/images/pages/publikationen/aertosinskimae_id_4297.pdf. Accessed May 3, 2018.
Kronovsky, G.A., Sieslak, M.J., Headley, T.J., Romig, A.D., and Hammetter, W.F., INCONEL 718: a solidification diagram, Metall. Trans. A, 1989, vol. 20, no. 10, pp. 2149–2158.
Choudhury, A., State of the art of superalloy production for aerospace and other application using VIM/VAR or VIM/ESR, ISIJ Int., 1992, vol. 32, no. 5, pp. 563–574.
Alam, T., Felfer, P.J., Chaturvedi, M., Stephenson, L.T., Kilburn, M.R., and Cairney, J.M., Segregation of B, P, and C in the Ni-based superalloy, Inconel 718, Metall. Mater. Trans. A, 2012, vol. 43, pp. 2183–2191.
Kablov, E.N., Litye lopatki gazoturbinnykh dvigatelei (Casted Blades of Gas Turbine Engines), Moscow: Mosk. Inst. Stali Splavov, 2001.
Linchevskii, B.V., Vakuumnaya induktsionnaya plavka (Vacuum-Inducted Smelting), Moscow: Metallurgiya, 1975.
Baum, B.A., Larionov, V.N., Kovalenko, L.V., Tyagunov, G.V., Kuleshova, E.A., Baryshev, E.E., Tret’yakova, E.E., and Kolotukhin, E.V., Resource saving and improvement of service properties of castings of heat-resistant nickel alloys by high-temperature treatment of alloys. https://viam.ru/public/files/ 1991/1991-200908.pdf. Accessed May 3, 2018.
Efimov, V.A., Teoreticheskie osnovy razlivki stali (Theory of Steel Casting), Kiev: Akad. Nauk Ukr. SSR, 1960.
Eron’ko, S.P. and Bykovskikh, S.V., Razlivka stali: tekhnologiya, oborudovanie (Steel Casting: Technology and Equipment), Kiev: Tekhnika, 2003.
INTECO special melting technologies: operation guide, INTECO website. https://www.inteco.at/en/.
Liu, W.C., Yao, M., Chen, Z.L., and Wang, S.G., Niobium segregation in Inconel 718, J. Mater. Sci., 1999, vol. 34, no. 11, pp. 2583–2586.
Shved, F.I., Slitok vakuumnogo dugovogo pereplava (Ingot of Vacuum Arc Remelting), Chelyabinsk: Izd. Tat’yany Lur’e, 2009.
Defekty stali (Steel Defects), Novokshchenova, S.M. and Vinograd, M.I., Eds., Moscow: Metallurgiya, 1984.
Galkin, A.N., The influence of thermophysical conditions of solidification and ingot shape for hollow billets on its structure and distribution of non-metallic inclusions, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Volgograd, 2015.
Kaputkina, E.A., Atlas defektov stali (Atlas of Steel Defects), Bernshtein, M.L., Ed., Moscow: Metallurgiya, 1979.
Zubarev, K.A, Kotel’nikov, G.I., Titova, K.O., Semin, A.E., and Mikhailov, M.A., Predicting the liquidus temperature of complex nickel alloys, Steel Transl., 2016, vol. 46, no. 9, pp. 633–637.
Valuev, D.V., Razlivka i kristallizatsiya stali i splavov (Casting and Crystallization of Steel and Alloys), Tomsk: Tomsk. Politekh. Univ., 2009.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Demchenko, A.I., Korzun, E.L. & Chernyshov, E.A. Improving Cylindrical Inconel 718 Ingots Produced at PAO Ruspolimet. Steel Transl. 49, 223–227 (2019). https://doi.org/10.3103/S0967091219040041
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091219040041