Abstract
We study the processes of additive formation of spherically shaped rigid bodies due to the uniform accretion of additional matter to their surface in an arbitrary centrally symmetric force field. A special case of such a field can be the gravitational or electrostatic force field. We consider the elastic deformation of the formed body. The body is assumed to be isotropic with elasticmoduli arbitrarily varying along the radial coordinate.We assume that arbitrary initial circular stresses can arise in the additional material added to the body in the process of its formation. In the framework of linear mechanics of growing bodies, the mathematical model of the processes under study is constructed in the quasistatic approximation. The boundary value problems describing the development of stress–strain state of the object under study before the beginning of the process and during the entire process of its formation are posed. The closed analytic solutions of the posed problems are constructed by quadratures for some general types of material inhomogeneity. Important typical characteristics of the mechanical behavior of spherical bodies additively formed in the central force field are revealed. These characteristics substantially distinguish such bodies from the already completely composed bodies similar in dimensions and properties which are placed in the force field and are described by problems of mechanics of deformable solids in the classical statement disregarding the mechanical aspects of additive processes.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
E. I. Rashba, “Determination of Stresses in Arrays under the Action of Their Own Weight with the Order of Their Erection,” in Proc. Inst. of Structural Mechanics Acad. Sci. UkrSSR, No. 18, (1953) pp. 23–27.
A. V. Manzhirov, “Mechanics of Growing Solids: New Track in Mechanical Engineering,” in ASME 2014, International Mechanical Engineering Congress and Exposition, Montreal, Quebec, Canada, November 14–20, 2014, Vol. 9: Mechanics of Solids, Structures and Fluids, p. V009T12A039.
A. V. Manzhirov, “Arch Structure Building by an Additive Manufacturing Technology under the Action of Gravity Force,” Izv. Ross. Akad. Nauk. Mekh. Tverd. Tela, No. 5, 94–107 (2015) [Mech. Solids (Engl. Transl.) 50 (5), 559–570 (2015)].
A. V. Manzhirov and D. A. Parshin, “Influence of the Erection Regime on the Stress–Strain State of a Viscoelastic Arced Structure Erected by Additive Technology under the Force of Gravity,” Izv. Ross. Akad. Nauk.Mekh. Tverd. Tela, No. 6, 69–91 (2015) [Mech. Solids (Engl. Transl.) 50 (6), 657–675 (2015)].
A. V. Manzhirov and D. A. Parshin, “Application of Prestressed Structural Elements in the Erection of Heavy Viscoelastic Arched Structures with the Use of an Additive Technology,” Izv. Ross. Akad. Nauk. Mekh. Tverd. Tela, No. 6, 93–104 (2016) [Mech. Solids (Engl. Transl.) 50 (6), 692–700 (2016)].
A. V. Manzhirov, “Advances in the Theory of Surface Growth with Applications to Additive Manufacturing Technologies,” Proc. Engng 173, 11–16 (2017).
J. J. Beaman, C. Atwood, T. L. Bergman, et al., WTEC Panel Report on Additive/Subtractive Manufacturing Research and Development in Europe (World Technology Evaluation Center, Baltimore, 2004).
I. Gibson, D. W. Rosen, and B. Stucker, Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing (Springer Verlag, LCC, New York, 2010).
S. Yang and Y. F. Zhao, “Additive manufacturing-enabled design theory and methodology: a critical review,” Int. J. Adv. Manufact. Techn. 80 (1-4), 327–342 (2015).
M. A. Zlenko, M. V. Nagaitzev, and V. M. Drobysh, Additive Technologies in Mechanical Engineering (Izdat. FGUP “NAMI”, Moscow, 2015) [in Russian].
A. Gebhardt and J. S. Noetter, AdditiveManufacturing: 3D Printing for Prototyping andManufacturing (Carl Hanser Verlag,Munich, 2016).
A. V. Manzhirov and D. A. Parshin, “Modeling the Accretion of Cylindrical Bodies on a Rotating Mandrel with Centrifugal Forces Taken into Account,” Izv. Ross. Akad. Nauk. Mekh. Tverd. Tela, No. 6, 149–166 (2006) [Mech. Solids (Engl. Transl.) 41 (6), 121–134 (2006)].
A. V. Manzhirov, “A Method for Mechanical Design of AM Fabricated Viscoelastic Parts,” in Transactions on Engineering Technologies (Springer, Singapore, 2016), pp. 223–235.
A. V. Manzhirov, “Fundamentals of Mechanical Design and Analysis for AM Fabricated Parts,” Proc. Manufact. 7, 59–65 (2016).
L. D. Landau and E. M. Lifshits, Theoretical Physics, Vol. 2: Field Theory, 7th ed. corrected (Nauka, Moscow, 1988) [in Russian].
C. B. Brown and L. E. Goodman, “Gravitational Stresses in Accreted Bodies,” Proc. Roy. Soc. London 276 (1367), 571–576 (1963).
Jon Kadish, J. R. Barber, P. D. Washabaugh, and D. J. Scheeres, “Stresses in Accreted Planetary Bodies,” Int. J. Solids Struct. 45, 540–550 (2008).
A. V. Manzhirov and D. A. Parshin, “Accretion of a Viscoelastic Ball in a Centrally Symmetric Force Field,” Izv. Ross. Akad. Nauk. Mekh. Tverd. Tela, No. 1, 66–83 (2006) [Mech. Solids (Engl. Transl.) 41 (1), 51–64 (2006)].
V. A. Lomakin, Theory of Elasticity of Inhomogeneous Bodies (Izdat.MGU, Moscow, 1976) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © D.A. Parshin, 2017, published in Izvestiya Akademii Nauk, Mekhanika Tverdogo Tela, 2017, No. 5, pp. 70–82.
About this article
Cite this article
Parshin, D.A. Analytic Solution of the Problem of Additive Formation of an Inhomogeneous Elastic Spherical Body in an Arbitrary Nonstationary Central Force Field. Mech. Solids 52, 530–540 (2017). https://doi.org/10.3103/S0025654417050089
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0025654417050089