Abstract
Preliminary surface deformation (rolling) is proposed in the turning of polymers. The dependence of the surface roughness on the rolling and cutting conditions is derived.
Similar content being viewed by others
References
Erenkov, O.Yu., Ivakhnenko, A.G., Hosen R., and Gavrilova, A.V., Obrabotka polimernykh materialov rezaniem na osnove obsepecheniya stabil’nosti tekhnologicheskoi sistemy i predvaritel’nykh vnyshnikh vozdeistvii na zagotovki (Cutting of Polymers Based on Stability of Technological System and Preliminary External Influences on the Billets), Vladivostok: Dal’nauka, 2011.
Poduraev, V.N., Rezanie trudnoobrabatyvaemykh materialov. Uchebnoe posobie dlya vuzov (Cutting of Hard Materials: Manual for Higher Education Institutions), Moscow: Mashinostroenie, 1974.
Kartashov, E.M., Tsoi, B., and Shevelev, V.V., Strukturno- statisticheskaya kinetika razrusheniya polimerov (Structural-Static Kinetics of Destruction of Polymers), Moscow: Khimiya, 2002.
Erenkov, O.Yu., Bogachev, A.P., and Erenkov, S.O., RF Patent 2497670, 2013.
Erenkov, O.Yu., Erenkov, S.O., Kalita, G.A., and Kalita, E.G., RF Patent 2438872, 2012.
Erenkov, O.Yu. and Ivakhnenko, A.G., Computational model of nonlinear oscillations and conditions of instability of technological systems for turning, Uch. Zap. Komsomol’sk- na-Amure Gos. Tekh. Univ., 2010, nos. 1–1(1), pp. 45–51.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © O.Yu. Erenkov, A.S. Vereshchagina, E.G. Kravchenko, M.A. Kozlova, 2016, published in Vestnik Mashinostroeniya, 2016, No. 2, pp. 80–82.
About this article
Cite this article
Erenkov, O.Y., Vereshchagina, A.S., Kravchenko, E.G. et al. Machining polymer workpieces on a lathe after preliminary surface deformation. Russ. Engin. Res. 36, 376–378 (2016). https://doi.org/10.3103/S1068798X1605004X
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X1605004X