Abstract
The influence of hydrogen alloying on the properties of briquettes fabricated from titanium sponge by compaction in a closed mold at temperatures of 170, 325, and 400°C and a pressure of 1000 MPa is investigated. Our results show the reasonability of using the hydrogen plasticizing effect when fabricating quasi-monolith billets from noncompact feedstock in the form of sponge by pressure-treatment methods.
Similar content being viewed by others
References
Hartman, A.D., Gerdemann, S.J., and Hansen, J.S., Producing lower-cost titanium for automotive applications, JOM, 1998, vol. 50, no. 9, pp. 16–19.
Obodovskii, E.S. and Laptev, A.M., Poroshk. Metall., 1987, no. 4, p. 28.
Zalazinskii, A.G., Novozhonov, V.I., Kolmykov, V.L., et al., Metally, 1997, no. 6, p. 64.
Zhadkevich, M.L., Shapovalov, V.A., Konstantinov, V.S., et al., Sovrem. Elektrometall., 2005, no. 3, p. 64.
Synkov, A.S., Vestn. Dvigatelestr., 2007, no. 2, p. 142.
Ivchenko, Z.A. and Lunev, V.V., Novye Mater. Tekhnol. Metall. Mashinostr., 2010, no. 1, p. 90.
Zwicker, U. and Schleicher, H., US Patent 2892742, 1959.
Nosov, V.K. and Kolachev, B.A., Vodorodnoe plastifitsirovanie pri goryachei plasticheskoi deformatsii titanovykh splavov (Hydrogen Plasticizing during Hot Plastic Deformation of Titanium Alloys), Moscow: Metallurgiya, 1986.
Aksenov, Yu.A., Bashkin, I.O., Kolmogorov, V.L., et al., Fiz. Met. Metalloved., 1989, vol. 67, no. 5, p. 993.
Il’in, A.A., Kolachev, B.A., Nosov, V.K., and Mamonov, A.M., Vodorodnaya tekhnologiya titanovykh splavov (Hydrogen Technology of Titanium Alloys), Moscow: MISiS, 2002.
Ovchinnikov, A.V., Substantiation and Development of Hydrogen Technology of Production of Deformed Half-Products from Titanium Alloys, Extended Abstract of Doctoral (Eng.) Dissertation, Moscow: Russ. State Tech. Univ. MATI, 2011.
Froes, F.H., Senkov, O.N., and Qazi, J.I., Int. Mater. Rev., 2004, vol. 49, nos. 3–4, p. 227.
Murzinova, M.A., Salishchev, G.A., Afonichev, D.D., et al., Metally, 2000, no. 6, p. 73.
Ivasishin, O.M., Savvakin, D.G., Bondareva, K.A., et al., Nauka Innovats., 2005, vol. 1, no. 2, p. 44.
Shevchenko, V.V., Nizkin, I.D., Mal’kov, A.V., and Luk’yanova, E.V., Russ. J. Non-Ferrous Met., 2008, vol. 49, no. 3, pp. 181–186.
Lapovok, R., Tomus, D., Skripnyuk, V.M., et al., Mater. Sci. Eng. A, 2009, vol. 513–514, p. 97.
Senkevich, K.S. and Skvortsova, S.V., Tekhnol. Legk. Splav., 2012, no. 2, p. 70.
Anisimova, L.I., Bukhvalov, A.B., Veselov, I.N., et al., Metally, 2001, no. 4, p. 84.
Mueller, W.M., Titanium hydrides, in Metal Hydrides, Mueller, W.M., Blackledge, J.P., and Libowitz, G.G., Eds., New York: Academic Press, 1968.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Nesterenko, V.I. Novozhonov, A.G. Zalazinskii, A.V. Skripov, 2015, published in Izvestiya VUZ. Tsvetnaya Metallurgiya, 2015, No. 2, pp. 52–57.
About this article
Cite this article
Nesterenko, A.V., Novozhonov, V.I., Zalazinskii, A.G. et al. Influence of temperature on compactibility of briquettes of titanium sponge alloyed with hydrogen. Russ. J. Non-ferrous Metals 56, 287–292 (2015). https://doi.org/10.3103/S1067821215030141
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821215030141