Abstract
A boost converter and a system of energy transfer at a high voltage (up to 1100 V) developed for an “Energy-2” generator 200 kW in power are described. This generator is intended for solving the problems of precision monitoring of the electromagnetic depth of the Earth’s crust at seismoactive regions with an aim to search for earthquake forerunners. High voltage allows taking off the total generator’s power on transmitting antennas with high resistance (7 Ω and higher) within a wide frequency range (0.1–200 Hz) as well as on low-resistance antennas (lower than 0.7 Ω) at high frequencies (greater than 20 Hz). Modern Russian and foreign literature on the problem of developing transformers and rectifiers of the generator’s power circuit, responsible for generation of powerful low-frequency electromagnetic signals, is reviewed. Theoretical research and numerical simulation of the “Energy-2” generator’s power circuit are performed and the element base of the latter is optimized. Based on the developed documentation of all components, radiators and a system of forced ventilation have been made. The proposed generator-measuring complex has no analogs in world practice and can be used for solving a wide range of fundamental and applied problems.
Similar content being viewed by others
References
Akopov, I.I., Antipov, Yu.N., Velikhov, E.P., et al., Special Geophysical Test Facility “Poligon-1” Intended for Electromagnetic Probing of the Earth Crust, Preprint of IVTAN no. 3-095, Moscow: IVTAN, 1982.
Barannik, M.B., Dolbnya, A.G., Zhamaletdinov, A.A., Efimov, B.V., Katanovich, A.A., Kontorovich, V.V., Kolobov, V.V., Kuzevanov, V.I., Lavrukhin, V.A., Lisitsin, Yu.D., Panfilov, A.S., Pesin, L.B., Prokopchuk, V.I., Fesenko, Yu.V., and Shvetsov, A.N., RF Patent no. 57020, 2006.
Barsukov, O.M., Possible Criteria of the Earthquake Prediction: ρk Measuring over Time, Izv. AN USSR. Fizika Zemli, 1968, no. 7, pp. 86–88.
Barsukov, O.M. and Sorokin, O.N., The Variation of Rocks Apparent Resistance in Garmskii Seismo-Active Region, Izv. AN USSR. Fizika Zemli, 1973, no. 10, pp. 100–102.
Botbaev, B.A., Romanchenko, O.L., and Tuleev, M.B., Geofizicheskie ustanovki dlya glubinnogo elektromagnitnogo zondirovaniya zemnoi kory s ispol’zovaniem LEP. Glubinnye geoelektricheskie issledovaniya s ispol’zovaniem promyshlennykh linii elektroperedach (The Geophysical Test Facilities Intended for Depth Electromagnetic Sounding of the Earth Crush by Using the Power Lines. Depth Geoelectrical Investigations by Using the Industrial Power Lines), Apatity: Kol’skii filial AN USSR, 1990, pp. 81–86.
Velikhov, E.P., Ed., Geoelektricheskie issledovaniya s moshchnym istochnikom toka na Baltiiskom shchite (Geoelectrical Investigations with Powerful Current Source Carried out at Baltic Sheet), Moscow: Nauka, 1989.
Velikhov, E.P., Volkov, Yu.M., D’yakonov, B.P., et al., Magnetohydrodynamic Generators Application for Geophysical Investigations and Earthquake Prediction, Preprint of IAE no. 2532, Moscow: IAE, 1975.
Dreizin, Yu.A., The Way to Use the Accumulation Method for Electromagnetic Probing, Izv. AN USSR. Fizika Zemli, 1982, no. 2, pp. 108–110.
Zhamaletdinov, A.A., Magnetohydrodynamic Experiment “Khibiny”—Thirtieth Anniversary, Fizika Zemli, 2005, no. 8, pp. 1–8.
Zhamaletdinov, A.A., Kovalevskii, V.Ya., Pavlovskii, V.I., Tanachev, G.S., and Tokarev, A.D, Depth Sounding by Using the Power Lines with Current Power of 800kW “Volgograd-Donbass,” Dokl. AN USSR, 1982, vol. 265, no. 5, pp. 1101–1105.
Zhuravlev, V.I., Zeigarnic, V.A., and Sidorin, A.Ya., Elektromagnitnye zondirovaniya zemnoi kory Garmskogo poligona odinochnymi impul’sami (Electromagnetic Probing of the Earth Crush of Garmskii Proving Ground by Single Pulses), Moscow: OIFZ RAN, 1997.
Zeigarnic, V.A. and Sidorin, A.Ya., Magnetohydrodynamic Generator “Pamir-1,” which is Used in the Investigations Related to the Earthquake prediction, Seism. pribory, 1997a, issue 27, pp. 77–91.
Zeigarnic, V.A. and Sidorin, A.Ya., Generator Power Plants of Periodical Operation and its Application for the Earthquake Prediction, Seism. pribory, 1997b, issue 28, pp. 69–88.
Zeigarnic, V.A. and Sidorin, A.Ya., Pulse Magnetohydrodynamic Generators Application for the Earthquake Prediction, Seism. pribory, 1997c, issue 28, pp. 89–98.
Zeman, S., Osipov, A., and Sandyrev, O., Operation Features of High Frequency Power Transformer in the Circuit of Series Resonance Inverter, Silovaya elektronika, 2007, no. 1.
Kolpakov, A.I., Topology of Frequency Transducers of Mean and High Power, Komponenty i tekhnologii, 2002, no. 2.
Kolpakov, A.I., The Performances and Application Features of MOSFET/IGBT Drivers, Komponenty i tekhnologii, 2003, no. 3.
Kolpakov, A.I., Multilayer Tyre and Modules SEMISTACK from SEMIKRON, Silovaya elektronika, 2004a, no. 1, pp. 32–36.
Kolpakov, A.I., The Way to Calculate the Condenser of Power Supply Bar of Powerful Transforming Devices, Komponenty i tekhnologii, 2004b, no. 2.
Kolpakov, A.I., SEMIX + SKYPER = Adaptive Intelligent Modulus IGBT IGBT, Silovaya elektronika, 2005a, no. 1.
Kolpakov, A.I., The Features of Parallel Connection of IGBT Modulus, Komponenty i tekhnologii, 2005b, no. 8.
Kolpakov, A.I., Circuit Technology of Powerful High-Voltage Transducers, Silovaya elektronika, 2007, no. 2.
Myachkin, V.I., Kostrov, B.V., Sobolev, G.A., and Shamina, O.G., The Foundations of Earthquake Focus Physics and the Foreshocks, Fizika ochaga zemletryasenii, Moscow: Nauka, 1975, pp. 6–29.
Ostashevskii, M.G. and Sidorin, A.Ya., The Methods and Results of Electrometrical Observations in Seismo-Active Region, Dokl. AN USSR, 1985, vol. 282, no. 2, pp. 295–299.
Ostashevskii, M.G. and Sidorin, A.Ya., Apparatura dlya dinamicheskoi geoelektriki (The Instruments for Dynamic Geo-Electric Engineering), Moscow: IFZ AN USSR, 1990.
Ostashevskii, M.G., Poltanov, A.E., and Sidorin, A.Ya., The Generators Facilities Intended for Earthquake Prediction with the Help of Electromagnetic Probing with Signals Accumulation, Seism. pribory, 1997, issue 27, pp. 15–20.
Romash, E.M., Drabovicj, Yu.I., Yurchenko, N.N., and Shevchenko, P.N., Vysokochastotnye tranzistornye preobrazovateli (High-Frequency Transistor Transducers), Moscow: Radio i svyaz’, 1988.
Sapuzhak, Ya.S., Shamotko, V.M., Kusailo, R.I., et al., Trends of Application of dc Powerful Transducers for Geophysical Application, Proc. V All-Union Seminar on Electromagnetic Probing, Kiev: Naukova Dumka, 1978, pp. 171–172.
Sidorin, A.Ya., Predvestniki zemletryasenii (The Earthquake Forerunners), Moscow: Nauka, 1992.
Sidorin, A.Ya., Pervoe primenenie MGD-generatorov v geofizike: eksperiment na Garmskom poligone. Teoriya i metodika glubinnykh elektromagnitnykh zondirovanii na kristallicheskikh shchitakh. Ch. 1. (The First Application of the Magnetohydrodynamic Generators in Geophysics: the Experiment on Gamskii Proving Ground. The Theory and Procedure of Depth Electromagnetic Probing at Crystal Sheets. Part I), Apatity: KNTs RAN, 2006, pp. 114–124.
Sidorin, A.Ya. and Zeigarnik, V.A., Electromagnetic Probing with Magnetohydrodynamic Generator Equipped by Voltage Transducer, Seism. pribory, 1997a, issue 29, pp. 30–34.
Sidorin, A.Ya. and Zeigarnik, V.A., Bank of Capacitors as a Generator’s Power Plant Intended for the Earthquake Prediction, Seism. pribory, 1997b, issue 29, pp. 69–84.
Sidorin, A.Ya., Zhuravlev, V.I., and Zeigarnik, V.A., The Apparent Resistance Variation According to the Results of Probing with Capacitors Bank, Federal’naya sistema sesmologicheskikh nablyudenii i prognoza zemletryasenii: Infanalit. byull., 1996, vol. 3, no. 3, pp. 45–77.
Simkin, Ya. and Kolpakov, A., The Features of Application of Powerful IGBT Modulus Produced by SEMIKRON Company, Elektronnye komponenty, 2002, no. 6, pp. 37–45.
Tikshaev, V.V., Abdulvaliev, M.T., Osipov, V.G., et al., Seismo-Electromagnetic Procedure of Oil and Gas Prospecting on the Base of Common Technology, Oil and Gas Prospecting: Papers of Soviet geologists at XXVIII IGC Session, Washington, 1989., Moscow: VNIGNP, 1989, pp. 122–131.
Trapeznikov, Yu.A., Volykhin, A.M., Shchelochkov, G.G., et al., The Results of Moding Electrometrical Observations According to D3 Circuit Carried Out at Frunze Forecasting Proving Ground (Proving Ground IVTAN-2), Prognoz zemletryasenii, 1986, no. 7, pp. 103–106.
Khermvil’, M. and Kolpakov, A., The Way to Control the Insulating Lock IGBT. P. 1 and 2, Novosti elektroniki, 2008, nos. 11/13.
Shishkin, S., Power Condensers of Power Supply Bar of Powerful Frequency Transducers, Silovaya elektronika, 2006, no. 4.
Alexa, D., Neacsu, D.O., and Donescu, V., Three-Phase AC/Single-Phase AC Converters with Resonant Circuits for High Operating Frequencies, IEE Proc. Electric Power Applications, 1997, vol. 144, no. 3, pp. 207–213.
Aluminum Electrolytic Capations. Ordering no. EPC:27009-7600, Germany: Epcos AG, 2002.
Bhosale, P. and Hermwille, M., Connection of Gate Drivers to IGBT and Controller, SEMIKRON Application Note AN 7002, 2006.
Den Bossche, A.V. and Valchev, V.C., Inductors and Transformers for Power Electronics, London: CRC Press LLC, Taylor and Francis group, 2005.
Farrington, R., Jovanovic, M.M., and Lee, F.C., Analysis of Reactive Power in Resonant Converters, Power Electronics Specialists Conference, 1992. PESC 92 Record., 23rd Annual IEEE, 1992, pp. 197–205.
Hamada, S. and Nakaoka, M., Analysis and Design of a Saturable Reactor Assisted Soft-Switching Full-Bridge dc-dc Converter, IEEE Transactions on Power Electronics, 1994, vol. 9, no. 3, pp. 309–317.
Hermwille, M., Plag and Play IGBT Driver Cores for Conterters, Power Electronics Europe, 2006, issue 2, pp. 10–12.
Meeker, D.C., Finite Element Method Magnetics: User’s Manual, 2006.
Odendaal, W.G., Azevedo, J., Bruning, G.W., and Wolf, R.M., A High-Efficiency Magnetic Component with Superior Caloric Performance for Low-Profile High-Density Power Conversion, IEEE Transactions on Industry Applications, 2004, vol. 40, no. 5, pp. 1287–1293.
Pavlovsky, M., Electronic DC Transformer with High Power Density, Presov: Vydavat’el’stvo Michala Vašhka, 2006.
Power Modules: Application Manual, Germany: SEMIKRON Int., 2004.
Snubber Series for IGBTs, EPCOS COMPONENTS, 2004, no. 1, p. 65.
Steigerwald, R.L., A Comparison of Half-Bridge Resonant Converter Topologies, IEEE Transactions on Industry Applications, 1988, vol. 3, no. 2, pp. 174–182.
Theron, P.C. and Ferreira, J.A., The Zero Voltage Switching Partial Series Resonant Converter, IEEE Transactions on Industry Applications, 1995, vol. 31, no. 4, pp. 879–886.
Xi, N. and Sullivan, C.R., An Improved Calculation of Proximity-Effect Loss in High Frequency Windings of Round Conductors, Power Electronics Specialist Conf., 2003. PESC 03.2003. 34th Annual IEEE, 2003, pp. 853–860.
Author information
Authors and Affiliations
Additional information
Original Russian Text © E.D. Tereshchenko, V.F. Grigoryev, M.B. Barannik, A.N. Danilin, B.V. Efimov, V.V. Kolobov, P.I. Prokopchuk, V.N. Selivanov, Yu.A. Kopytenko, A.A. Zhamaletdinov, 2009, published in Seismicheskie Pribory, 2009, No. 4, pp. 43–65.
About this article
Cite this article
Tereshchenko, E.D., Grigoryev, V.F., Barannik, M.B. et al. A set-up converter and energy transfer system of an “Energy-2” generator for electromagnetic sounding and monitoring of zones of earthquake sources. Seism. Instr. 45, 119–133 (2009). https://doi.org/10.3103/S0747923909010216
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0747923909010216