[1] Kurama Y, Sause R, Pessiki S, Lu L-W (1999). Lateral load behavior and seismic design of unbonded post-tensioned precast concrete walls. Structural Journal 96 (4):622-632.
[2] Priestley MN, Sritharan S, Conley JR, Pampanin S (1999). Preliminary results and conclusions from the PRESSS five-story precast concrete test building. PCI Journal 44 (6):42-67.
[3] Kurama YC, Sause R, Pessiki S, Lu L-W (2002). Seismic response evaluation of unbonded post-tensioned precast walls. Structural Journal 99 (5):641-651.
[4] Perez FJ, Sause R, Pessiki S (2007). Analytical and experimental lateral load behavior of unbonded posttensioned precast concrete walls. Journal of Structural Engineering 133 (11):1531-1540.
[5] ACI Innovation Task Group 5 (2007) Acceptance criteria for special unbonded post-tensioned precast structural walls based on validation testing. ACI ITG-5.1-07, American Concrete Institute.
[6] ACI Innovation Task Group 5 (2009) Requirements for Design of a Special Unbonded Post-tensioned Precast Shear Wall Satisfying ACI ITG-5.1 (ACI ITG-5.2-09) and Commentary: An ACI Standard. American Concrete Institute.
[7] Hassani B, Jafari A (2012). An investigation on the seismic performance of reinforced concrete panel structures. Asian Journal of Civil Engineering (Building and Housing) 13 (2):181-193.
[8] Zandi Y, Sadeghi M, Jafari A, Keyhani A (2013). Effect of height on the seismic behavior of reinforced concrete bearing wall structural systems with high ductility. Middle East Journal of Scientific Research 14 (10):1345-1353.
[9] Jafari A, Ghasemi MR, Akbarzadeh Bengar H, Hassani B (2016). Modeling of dynamic behavior and estimation of damage incurred by self-centering rocking walls. Journal of Rehabilitation in Civil Engineering 4 (2):93-108.
[10] Azadi Kakavand MR, Khanmohammadi M (2018). Seismic Fragility assessment of local and global failures in low-rise non-ductile existing RC buildings: Empirical shear-axial modelling vs. ASCE/SEI 41 approach. Computational Engineering and Physical Modeling 1 (1):38-57.
[11] Jafari A, Dugnani R (2018). Estimation of Load-Induced Damage and Repair Cost in Post-Tensioned Concrete Rocking Walls. Journal of Shanghai Jiaotong University (Science) 23 (1):122-131.
[12] Jafari A, Ghasemi MR, Bengar HA, Hassani B (2018). A novel method for quantifying damage to cast‐in‐place self‐centering concrete stepping walls. Structural Concrete 19 (6):1713-1726.
[13] Jafari A, Ghasemi MR, Bengar HA, Hassani B (2018). Seismic performance and damage incurred by monolithic concrete self-centering rocking walls under the effect of axial stress ratio. Bulletin of Earthquake Engineering 16 (2):831-858.
[14] Ghoddusi M, Bakhshi H, Khosravi H (2019). Evaluation of seismic behavior of steel shear wall by time history analysis. Computational Engineering and Physical Modeling 2 (1):32-52.
[15] Henry R (2011) Self-centering precast concrete walls for buildings in regions with low to high seismicity. ResearchSpace@ Auckland,
[16] Wight GD (2006) Seismic performance of a post-tensioned concrete masonry wall system. ResearchSpace@ Auckland,
[17] ElGawady M, Booker AJ, Dawood HM (2010). Seismic behavior of posttensioned concrete-filled fiber tubes. Journal of Composites for Construction 14 (5):616-628.
[18] ElGawady MA, Sha’lan A (2011). Seismic behavior of self-centering precast segmental bridge bents. Journal of Bridge Engineering 16 (3):328-339.
[19] Mattock AH, Yamazaki J, Kattula BT Comparative study of prestressed concrete beams, with and without bond. In: Journal Proceedings, 1971. vol 2. pp 116-125.
[20] Hassanli R (2019) Experimental Investigation of Unbonded Post-tensioned Masonry Walls. In: Behavior of Unbounded Post-tensioned Masonry Walls. Springer, pp 163-194.
[21] Building Seismic Safety Council (2009) NEHRP Recommended Provisions for New Buildings and Other Structures, Part I (Provisions) and Part II (Commentary). FEMA P-750/2009 ed. Washington, DC.
[22] Aaleti S, Sritharan S (2009). A simplified analysis method for characterizing unbonded post-tensioned precast wall systems. Engineering Structures 31 (12):2966-2975.
[23] Hassanli R, ElGawady MA, Mills JE (2016). Force–displacement behavior of unbonded post-tensioned concrete walls. Engineering Structures 106:495-505.
[24] ACI 318 (2019) Building Code Requirements for Structural Concrete and Commentary (ACI 318-19), ACI Committee 318. American Concrete Institute, Farmington Hills, MI.
[25] NZS 3101 (2006) The design of concrete structures. Standards New Zealand, New Zealand.
[26] AS3600 (2009) Australian standard: concrete structures. Standards Australia International, Sydney, Australia.
[27] Canadian Standards Association (2004) CAN CSA A23. 3-04 Design of concrete structures. CSA, Rexdale, Ontario.
[28] Torkian H, Keshavarz Z (2018). Determining the drift in reinforced concrete building using ANFIS soft computing modeling. Computational Engineering and Physical Modeling 1 (1):1-11.
[29] Shahmansouri AA, Bengar HA, Jahani E (2019). Predicting compressive strength and electrical resistivity of eco-friendly concrete containing natural zeolite via GEP algorithm. Construction and Building Materials 229:116883.
[30] Naderpour H, Nagai K, Fakharian P, Haji M (2019). Innovative models for prediction of compressive strength of FRP-confined circular reinforced concrete columns using soft computing methods. Composite Structures 215:69-84.
[31] Shahmansouri AA, Akbarzadeh Bengar H, Ghanbari S (2020). Experimental investigation and predictive modeling of compressive strength of pozzolanic geopolymer concrete using gene expression programming. Journal of Concrete Structures and Materials 5 (1):92-117.
[32] Kanchidurai S, Krishnan P, Baskar K (2020). Compressive Strength Estimation of Mesh Embedded Masonry Prism Using Empirical and Neural Network Models. Journal of Soft Computing in Civil Engineering 4 (4):24-35.
[33] Shahmansouri AA, Bengar HA, Ghanbari S (2020). Compressive strength prediction of eco-efficient GGBS-based geopolymer concrete using GEP method. Journal of Building Engineering 31:101326.
[34] Hwang S-H, Mangalathu S, Shin J, Jeon J-S (2021). Machine learning-based approaches for seismic demand and collapse of ductile reinforced concrete building frames. Journal of Building Engineering 34:101905.
[35] Naderpour H, Rafiean AH, Fakharian P (2018). Compressive strength prediction of environmentally friendly concrete using artificial neural networks. Journal of Building Engineering 16:213-219.
[36] Mangalathu S, Heo G, Jeon J-S (2018). Artificial neural network based multi-dimensional fragility development of skewed concrete bridge classes. Engineering Structures 162:166-176.
[37] Shahmansouri AA, Yazdani M, Ghanbari S, Bengar HA, Jafari A, Ghatte HF (2020). Artificial neural network model to predict the compressive strength of eco-friendly geopolymer concrete incorporating silica fume and natural zeolite. Journal of Cleaner Production 279:123697.
[38] Abbaszadeh MA, Sharbatdar M (2020). Modeling of Confined Circular Concrete Columns Wrapped by Fiber Reinforced Polymer Using Artificial Neural Network. Journal of Soft Computing in Civil Engineering 4 (4):61-78.
[39] Nematzadeh M, Shahmansouri AA, Zabihi R (2021). Innovative models for predicting post-fire bond behavior of steel rebar embedded in steel fiber reinforced rubberized concrete using soft computing methods. Structures.
[40] Naderpour H, Fakharian P, Rafiean AH, Yourtchi E (2016). Estimation of the shear strength capacity of masonry walls improved with Fiber Reinforced Mortars (FRM) using ANN-GMDH approach. Journal of Concrete Structures and Materials 1 (2):47-59.
[41] Naderpour H, Fakharian P (2016). A synthesis of peak picking method and wavelet packet transform for structural modal identification. KSCE Journal of Civil Engineering 20 (7):2859-2867.
[42] Naderpour H, Fakharian P (2018). Predicting the torsional strength of reinforced concrete beams strengthened with FRP sheets in terms of artificial neural networks. Journal of Structural and Construction Engineering 5 (1):20-35.
[43] Azadi Kakavand MR, Allahvirdizadeh R (2019). Enhanced empirical models for predicting the drift capacity of less ductile RC columns with flexural, shear, or axial failure modes. Frontiers of Structural and Civil Engineering 13 (5):1251-1270.
[44] Jafari A, Johnson S (2019). The inherent power efficiency of continuous tunable stiffness mechanisms. Mechanism and Machine Theory 135:208-224.
[45] Abdulla NA (2020). Using the artificial neural network to predict the axial strength and strain of concrete-filled plastic tube. Journal of Soft Computing in Civil Engineering 4 (2):63-86.
[46] Bengar HA, Shahmansouri AA, Sabet NAZ, Kabirifar K, Tam VW (2020). Impact of elevated temperatures on the structural performance of recycled rubber concrete: Experimental and mathematical modeling. Construction and Building Materials 255:119374.
[47] Azadi Kakavand MR, Taciroglu E (2020). An enhanced damage plasticity model for predicting the cyclic behavior of plain concrete under multiaxial loading conditions. Frontiers of Structural and Civil Engineering 14 (6):1531-1544.
[48] Bengar HA, Shahmansouri AA (2020). A new anchorage system for CFRP strips in externally strengthened RC continuous beams. Journal of Building Engineering 30:101230.
[49] Naderpour H, Eidgahee DR, Fakharian P, Rafiean AH, Kalantari SM (2020). A new proposed approach for moment capacity estimation of ferrocement members using Group Method of Data Handling. Engineering Science and Technology, an International Journal 23 (2):382-391.
[50] Azadi Kakavand MR, Sezen H, Taciroglu E (2021). Data-Driven Models for Predicting the Shear Strength of Rectangular and Circular Reinforced Concrete Columns. Journal of Structural Engineering 147 (1):04020301.
[51] Shahmansouri AA, Bengar HA, AzariJafari H (2021). Life cycle assessment of eco-friendly concrete mixtures incorporating natural zeolite in sulfate-aggressive environment. Construction and Building Materials 268:121136.
[52] Feng D-C, Cetiner B, Azadi Kakavand MR, Taciroglu E (2021). Data-Driven Approach to Predict the Plastic Hinge Length of Reinforced Concrete Columns and Its Application. Journal of Structural Engineering 147 (2):04020332.
[53] Shahmansouri AA, Nematzadeh M, Behnood A (2021). Mechanical properties of GGBFS-based geopolymer concrete incorporating natural zeolite and silica fume with an optimum design using response surface method. Journal of Building Engineering 36:102138.
[54] Chatterjee S, Sarkar S, Hore S, Dey N, Ashour AS, Shi F, Le D-N (2017). Structural failure classification for reinforced concrete buildings using trained neural network based multi-objective genetic algorithm. Structural Engineering and Mechanics 63 (4):429-438.
[55] Moradi MJ, Hariri-Ardebili MA (2019). Developing a library of shear walls database and the neural network based predictive meta-model. Applied Sciences 9 (12):2562.
[56] Khaleghi M, Salimi J, Farhangi V, Moradi MJ, Karakouzian M (2021). Application of Artificial Neural Network to Predict Load Bearing Capacity and Stiffness of Perforated Masonry Walls. CivilEng 2 (1):48-67.